|
| 1 | M&L for applying two coat of white wash after preparation of existing old decorated plastered/unplastered surfaces of walls, pillars, cornices by brooming down etc, complete all as specified and directed by Engineer in charge. |
| 2 | M&L for applying two coat of white wash after preparation of existing old decorated plastered/unplastered surfaces of celling, complete all as specified and directed by Engineer in charge. |
| 3 | M&L for applying a coat of oil bound distemper after preparation of old decorated plastered/unplastered surfaces of walls, pillars cornices etc, complete all as specified and directed by Engineer in charge. |
| 4 | M&L for complete removal of existing treatment from wall plaster surface by sand paper/electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plasteredsurfaces finally rubbed and smooth with sand paper, complete all as specified and directed by Engineer in charge. |
| 5 | M&L for applying interior grade wall care putty 1 to 2 mm thick to make the surface smooth, complete all as specified and directed by Engineer in charge. |
| 6 | M&L for two coats oil bound distemper any tint on prepared surfaces of walls over a coat of primer complete all as specified in SSR Part I, complete all as specified and directed by Engineer in charge. |
| 7 | M&L for preparing new plastered or old decorated surface of wall, concrete surface and applying two or more coat of 100% premium acrylic exterior emulsion paints in camouflaging pattern having VOC less than 50 gm/ltr and UV resistance as per IS 15489-2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives applying @ 1.43 litre/10 Sqm over and including priming coat of exterior primer of same make applied @ 0.90 litre/10 Sqm as per sample approved by GE, complete all as specified and directed by Engineer in charge.(Note : The % of the colours may change without any financial effect) |
| 8 | M&L for preparation of old painted wooden surfaces a coat of synthetic enamel paint of any descriptionhaving width/girth exceeding 10cm, complete all as specified and directed by Engineer in charge. |
| 9 | M&L for preparation of old painted steel/iron surfaces a coat of synthetic enamel paint of any description having width/girth exceeding 10 cm, complete all as specified and directed by Engineer in charge. |
| 10 | Taking down cement plaster on brick orstone masonry Including raking out joints, hacking for key scrubbing down with water etc, complete all as specified and directed by Engineer in charge. |
| 11 | M&L for 15 mm thick Cement plaster in CM (1:4) on fair faces of brick work or concrete surfaces and finishing the surface even and fair and applying two coat of cement base paint after preparation/priming newly plastered surface, complete all as specified and directed by Engineer in charge. |
| 12 | M&L for 15mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and fair and applying two coat of oil bound distemper after preparation/priming newly plastered surface, complete all as specified and directed by Engineer in charge. |
| 13 | M&L for 15mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and fair, complete all as specified and directed by Engineer in charge. |
| 14 | M&L for 5 mm thick cement plaster 1:3 on fair faces of brick work or concrete surfaces in ceiling and finishing the surface even and fair and applying two coat of white wash after preparation newly plastered surface, complete all as specified and directed by Engineer in charge. |
| 15 | M&L Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the Ratio 1:1:1 shall be applied and finish Even and applying two coat of cement base after preparation/priming newly plastered surface, complete all as specified and directed by Engineer in charge. |
| 16 | M&L for vitrifiedceramic tiles 10mm thick (square/rectangular) light shade area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:4) for laying floor finishes including dismantling, complete all as specified and directed by Engineer in charge. |
| 17 | M&L for Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:4) for laying floor finishes, complete all as specified and directed by Engineer in charge. |
| 18 | M&L for Glazed ceramic coloured tiles in vertical surface 350x250x7 mm / 450x300x7mm thick including 10mm thick cement plaster in CM 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and directed by Engineer in charge. |
| 19 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises, complete all as specified and directed by Engineer in charge. |
| 20 | M&L Machine cut kota stone slab flooring 20-25mm thick over 15mm thick cement screed base in cm 1:4laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed by Engineer in charge. |
| 21 | Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed by Engineer in charge. |
| 22 | S & F Rolled mild steel as in roof trusses (framed/unframed) purlins, rafter, trusses, rails and wind tie etc (Tee, Angle, channel or flat sections) incl distance pieces etc of grade Fe 410-W Gde E-250 equality A, complete all as specified and directed by Engineer in charge. |
| 23 | M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide, complete all as specified and directed by Engineer in charge. |
| 24 | Dismantling Plain or corrugated steel steeting any guage thickness/Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coveringsany gauge, thickness,as in valley gutter, ridge of roof, wall and cladding etc, complete all as specified and directed by Engineer in charge. |
| 25 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugatedsteel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, chajjas, fixed with self tapping screws, complete all as specified and directed by Engineer in charge. |
| 26 | S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down of old AC/PVC rain /soil water/vent pipe etc, complete all as specified and directed by Engineer in charge. |
| 27 | S&F 110 mm bore PVC (SWR) bends any radius, complete all as specified and directed by Engineer in charge. |
| 28 | S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down of old AC/PVC rain water soil water/vent pipe etc, complete all as specified and directed by Engineer in charge. |
| 29 | S&F 75 mm bore PVC (SWR) bends any radius, complete all as specified and directed by Engineer in charge. |
| 30 | M&L for 75mmPVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed by Engineer in charge. |
| 31 | M&L for 15 mm dia bore tubes medium grade galvanised steel tubing with all fitting and fixed to walls and ceilings or laid in floors including taking down and cleaning for removal to store etc, complete all as specified and directed by Engineer in charge. |
| 32 | M&L for 20 mm diatubes, medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking down, complete all as specified and directed by Engineer in charge. |
| 33 | S&F in repairs PVC valve less, symphonic action type, flushing cistern 10 Ltrs cap, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed by Engineer in charge. |
| 34 | S&F in repair Vitreous china squatting pan , \"Orissa\" pattern, size 580 x 440 mm white, with integral foot rests complete including provision of lime concrete bedding, complete all as specified and directed by Engineer in charge. |
| 35 | S&F in repairs Vitreous China wash basin, white , flat back, size 550x400mm fixed on existing brackets or stands incl 32mm PVC waste pipe, complete all as specified and directed by Engineer in charge. |
| 36 | S&F in repairs 15mm dia Pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flu-nuts screwed for iron pipe, complete all as specified and directed by Engineer in charge. |
| 37 | S&F rotational moulded polyethylene water storage tanks Capacity of tank 500 litres tripple layer, white colour,(cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete all as specified and directed by Engineer in charge. |
| 38 | M&L for rotational moulded polyethylene water storage tanks Triple Layer White Colour1000ltrCapacity (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I incl dismantling of u/s tank, complete all as specified and directed by Engineer in charge. |
| 39 | S&F ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210 gms), complete all as specified and directed by Engineer in charge. |
| 40 | S&F repair 15 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 41 | S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed metal gate valve, complete all as specified and directed by Engineer in charge. |
| 42 | Taking downshutters of any description exc 1 sqm but n exc 2 sqm each, complete all as specified and directed by Engineer in charge. |
| 43 | S&F of Flush door shutter 30mm thick solid core construction with block board core and plywood face panels, commercial type both sides, complete all as specified and directed by Engineer in charge. |
| 44 | S&F 250 mm Mild steel Sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and two on staple plate, complete all as specified and directed by Engineer in charge. |
| 45 | M&L for 75mm Plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection even and smooth without using extra cement, complete all as specified and directed by Engineer in charge. |
| 46 | S&F of PVC coated chain link fencing of mesh size 50x50 mm and GI wire dia 3 mm in PVC approved colour shage by GE, complete all as specified and directed by Engineer in charge. |
| 47 | Dismantling fencing wire mesh any type, complete all as specified and directed by Engineer in charge. |
| 48 | Dismantling of post or struts (wood or steel or RCC) any section embedded in concrete incl taking out embedded portion and making good disturbed ground, complete all as specified and directed by Engineer in charge. |
| 49 | Excavation in post holes (or similar holes) each n exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around, in layer n exc 25cm watering and removing surplus soil to a distance n exc 50m and making good surface, complete all as specified and directed by Engineer in charge. |
| 50 | M&L for Plain Cement Concrete 1:3:6, type C-1 (using 40mm graded stone aggregate) as in foundation filling and mass concrete for fixing RCC/any fencing post, complete all as specified and directed by Engineer in charge. |
| 51 | S&F of MS angle as in iron post and struts, gates, flat & round bars in fencing including cutting tops to shape as directed, drilling holes, notching for wire bolting etc and similar works like MS flat iron fillets confirming to Fe-290 Gde E-165, complete all as specified and directed by Engineer in charge. |
| 52 | S&F of Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and dia of neck 5 to 10mm, complete all as specified and directed by Engineer in charge. |
| 53 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing, complete all as specified and directed by Engineer in charge. |
| 54 | S&F Factory made solid panel PVC door shutter 30mm thick (stile), consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drg, complete all as specified and directed by Engineer in charge. |
| 55 | S&F 100mm Butt hinges medium weight, cold rolled mild steel, complete all as specified and directed by Engineer in charge. |
| 56 | S&F 200mm Aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed by Engineer in charge. |
| 57 | S&F 150mm Aluminium handles, cast type anodised, complete all as specified and directed by Engineer in charge. |
| 58 | M&L for 75 mm thick Cement concrete 1:4:8, type D-2 (40mm graded aggregate) as in sub base to paving, complete all as specified and directed by Engineer in charge. |
| 59 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc laid dry or laid dry and pointed in any mortar, complete all as specified and directed by Engineer in charge. |
| 60 | M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick machine pressedwith gray cement and pigment set, jointed and pointed in neat cement slurry in floors over 20 mm thick screed bed in CM 1:4, complete all as specified and directed by Engineer in charge. |
| 61 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed by Engineer in charge. |
| 62 | Disconnecting existing tank Exc 250 Ltr and n exc 500 Ltr. Setting aside (for lowering if required) for repair, cleaning, etc and hoisting if required reconnecting and refixing in position after and including cleaning and removing all scale and dirt etc from tank from mouths of circulating pipes etc, complete all as specified and directed by Engineer in charge. |
| 63 | Disconnecting existing tank Exc 500 Ltr and n exc 1000 Ltr. Setting aside (for lowering if required) for repair, cleaning, etc and hoisting if required reconnecting and refixing in position after and including cleaning and removing all scale and dirt etc from tank from mouths of circulating pipes etc, complete all as specified and directed by Engineer in charge. |
| 64 | Cleaning of RCC water tanks Exc 250 Ltr and n exc 500 Ltr disconnecting rtc and hoisting if required reconnecting and re fixing in position after and including and cleaning and removing all scale and dirt etc from tank and from mouths of circulating pipes etc, complete all as specified and directed by Engineer in charge. |
| 65 | M&L for writing letters or figures (Block, Roman, Italic or Indian) as TANK CLEANED ON (DD/MM/YEAR) n exc 30 cm high with synthetic enamel paint of any type of overhead water tank, complete all as specified and directed by Engineer in charge. |
| 66 | Dismantling water tanks Exc 250 Ltr and n exc 500 Ltr and removing to store, complete all as specified and directed by Engineer in charge. |
| 67 | Dismantling water tanks Exc 500 Ltr and n exc 1000 Ltrand removing to store, complete all as specified and directed by Engineer in charge. |
| 68 | S&F Plastic Cover of any type (threaded or hinge and locking system) For rotational moulded polyethylene water storage tank 500 Ltr capacity, complete all as specified and directed by Engineer in charge. |
| 69 | S&F repair Plastic Cover of any type (theaded or hinge and locking system) For rotational moulded polyethylene water storage tank 1000 Ltr capacity, complete all as specified and directed by Engineer in charge. |
| 70 | S&F in repair 15 mm dia GI tank nipple, complete all as specified and directed by Engineer in charge. |
| 71 | S&F in repair 20 mm dia GI tank nipple, complete all as specified and directed by Engineer in charge. |
| 72 | S&F in repair 25 mm dia GI tank nipple, complete all as specified and directed by Engineer in charge. |
| 73 | M&L Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to stor, complete all as specified and directed by Engineer in charge. |
| 74 | Refixing 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc) after cleaning inner and outer surfaces of pipes by using of wire brush including provision of new GI fiiting ( as required), complete all as specified and directed by Engineer in charge. |
| 75 | M&L 15 mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed by Engineer in charge. |
| 76 | M&L Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing and removal store, complete all as specified and directed by Engineer in charge. |
| 77 | Refixing 20 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) after cleaning inner and outer surfaces of pipes by using of wire brush including provision of new gi fiiting, complete all as specified and directed by Engineer in charge. |
| 78 | M&L 20 mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed by Engineer in charge. |
| 79 | Demolition of Brickwork or stone/boulder masonary,built in cement mortar or cement lime mortar, complete all as specified and directed by Engineer in charge. |
| 80 | M&L for Brick work (1:6) with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built, complete all as specified and directed by Engineer in charge. |
| 81 | S&F in repair stack clamp for 100 mm bore pipe out of 50 mm by 5 mm flat iron and 16 round round iron stay including bolt and nuts and securing ends of stay to walls or roof, complete all as specified and directed by Engineer in charge. |
| 82 | S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, for 100 mm dia of pipe including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed by Engineer in charge. |
| 83 | S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, for 75 mm dia of pipe including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed by Engineer in charge. |
| 84 | Supply onlyIntegral waterproofing, complete all as specified and directed by Engineer in charge. |
| 85 | Demolition of cement concrete in any description and in any position not otherwise specifically provided, complete all as specified and directed by Engineer in charge. |
| 86 | M&L for Providing, cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) for providing slope, padding, roof kerbs ormud stops, rounded or chamfered on edges, complete all as specified and directed by Engineer in charge. |
| 87 | M&L for applying two coat of oil bound distemper after preparation of new plastered/unplastered surfaces of walls, pillars cornices etc, complete all as specified and directed by Engineer in charge. |
| 88 | S&F Cast iron soil, waste and vent pipes 100 mm dia of pipe in any length with or without ears, with cement joints, and fixed to wall including taking down old/unserviceable pipe, complete all as specified and directed by Engineer in charge. |
| 89 | S&F Cast Iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 100 mm dia including taking down old/unserviceable pieces, complete all as specified and directed by Engineer in charge. |
| 90 | M&L for Raking out joints/ pointing to brick work in walls or to brick work or brick tiles, laid flat, in floors, surface channels, roofs, etc in cement mortar (1:3) including removing of bushes upto 10 cm dia trunk, grass from roof top, complete all as specified and directed by Engineer in charge. |
| 91 | S&F repair 15mm dia Stop valves, cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed by Engineer in charge. |
| 92 | S&F in repair Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms), complete all as specified and directed by Engineer in charge. |
| 93 | S&Fin repairs PVC connections 15 mm size with PTMT nuts of length 450mm, complete all as specified and directed by Engineer in charge. |
| 94 | S&F in repairs 15mm diaBib taps, Chromium plated, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed by Engineer in charge. |
| 95 | S&F in repairsChromium plated shower rose 125 mm size with or without swivel joints, including fixing to steel pipe or union, complete all as specified and directed by Engineer in charge. |
| 96 | S&F in repair 15 mm dia Brass CP wall mixer/wash hand basin mixing hot & cold water screwed down for iron pipe, complete all as specified and directed by Engineer in charge. |
| 97 | S&F in repair brass spindleforbib tap, pillar tap, stop cock,angle valve, wall mixture and basin mixture of any description etc, complete all as specified and directed by Engineer in charge. |
| 98 | Demolition of Cement Concrete (un-reinforced) n exc 15 cm thickness in Toilet Floors, Sunken Floors including taking out PCC of any description and removing debris, etc. to Outside of MD/AF Land, complete all as specified and directed by Engineer in charge. |
| 99 | M&L for rendering 20mm thick in Cement Mortar 1:4 on Sunken Portion or on Concrete Surfaces, mixing liquid WPC as per manufacturers instructions by Weight of water proofing compound 3% of cement, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete all as specified and directed by Engineer in charge.NOTE: WPC will be Measured and Paid under appropriate Item. |
| 100 | Supply only liquid Water Proofing Compound, ISI Marked, as approved, complete all as specified and directed by Engineer in charge. |
| 101 | M&L applying evenly Two Coats ofHot Blown type Bitumen at the Rate of 1.50 Kg per Square Metre on Concrete Surfaces, complete all as specified and directed by Engineer in charge. |
| 102 | M&L for laying 50 micron polythene film, black in floors of sunken, complete all as specified and directed by Engineer in charge. |
| 103 | M&L Cement Concrete 1:5:10 (using 40mm graded stone aggregate) as filling in Sunken Floors, Mass Concrete, etc, complete all as specified and directed by Engineer in charge. |
| 104 | M&L Cement Concrete 1:2:4type B0 (using 12.5mm graded stone aggregate) 25mm thick as in Flooring, finishing Cement Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed by Engineer in Charge. |
| 105 | M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not exc 10 cm girth in brick wall, complete all as specified and directed by Engineer in charge. |
| 106 | S&F in repair china wash down water closet padestal pattern white excluding flush and fix to position, including connection to drain etc, complete all as specified and directed by Engineer in charge. |
| 107 | S&F in repairs Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed by Engineer in charge. |
