|
| 1 | Material and labour for repairs to potholes any depth, exceeding 30mm and area not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal and making good by applying tack coat @ 5 Kg per 10Sqm (VG-10), putting in premixed bituminous macadam, well rammed and sealed with binder 9.80 kg per 10sqm (using paving bitumen VG-30), binded with 0.09 cum of stone chippings and again well rammed (including supply of premixed macadam, binder and chippings), rolled with smooth wheeled power roller 8 to 12 tonne and compacted to required camber and gradient and finishes to a uniform and smooth surfaces, complete all as specified and as directed. |
| 2 | Scrafying or picking gravelled, exc 50mm & n. exc 100mm macadam ro bituminous macadam surfaces in area not exc 400 sqm complete all as specified & directed. |
| 3 | Material and labour for preparing unsurfaced WBM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all dirt etc. and applying evenly a tack coat with bituminous primer at 5 KG per 10 Sq.m of paving bitumen ofVG-10 complete all as specified and as directed. |
| 4 | Material and labour for applying evenly a tack coat with bituminous primer at 2.5 KG per 10 Sq.m of paving bitumen ofVG-10 complete all as specified and as directed. |
| 5 | Material and labour for premix bituminous macadam, using paving bituminous of VG-30 Grade @ 4.5% by weight of total mix, mixed in hot mix plant & laid by mech paver finisher, rolled & compacted to required gradient & camber, consolidated thickness, exc 50mm but not exc 75mm complete all as specified & directed by Engr-in- Charge. |
| 6 | Material and labour for preparing old black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all dirt etc. and applying evenly a tack coat with bituminous primer at 5 KG per 10 Sq.m of paving bitumen ofVG-10 complete all as specified and as directed. |
| 7 | Material and labour for bituminous premix semi-dense asphaltic concrete 40mm consolidated thickness with 5.5% paving bitumen grade VG-30 as a binder content by weight of total mix and grading of aggregates & design criteria as specified in SSR Part-I clause No 20.B.2.5.4(d) & 20.B.2.11 and mix at hot mix plant, spread with mechanical paver rolled and consolidated to gradient and camber with power roller 8 to 12 tonne and all as specified in para 20.B.4 & sub para 20.B.4 of MES Schedule Part-I complete all as specified and as directed.Note: (i) For job mix formula design purpose maximum binder shall be as described i.e. 5.5% for VG-30 grade bitumen.(ii) No price adjustment shall be applicable if the approved quantity of binder as per design mixed is more than 5.5%. (iii) During design stage if binder content used less than 5.5% necessary price adjustment on quoted rate shall be done as per actual binder content used.(iv) Design to be got approved from GE |
| 8 | Material & Labour for Road Marking Strips, Lines, Dashes, Arrows, Letters etc of 2.5 mm thick [Reflective Type] of approved colour conforming to BS 3262-1989 on roads, pavements and the like not exceeding 10cm wide with Hot Thermo Plast material by fully automatic thermoplastic paint applicator machine, fitted with profile shoe, glass beads dispenser, propane tank heaters and profile shoe heater, driven by skilled operator on road surface complete as per MoRT & H specifications including cleaning the road surface of all dirt, scales, oil grease and foreign materials etc complete all as specified and as directed. |
| 9 | Supply and fixing in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 10 | Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector fixed with and incl MS stud of suitable size as per manufactures instructions. |
| 11 | Supply and fixing in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufactures instructions etc. all as specified and directed. |
| 12 | Supply and fixing Convex Mirror made up of PC materials having clear & definite mirror image, 130 degree of viewing anlge of size 1000mm dia, made of accrylic sheet with MORTH specification,provided on SS pipe 50mm dia, 1.20M long, embedded on PCC block 1:3:6 Type C-2 including necessary excavation and earthwork,complete all as specified and directed. |
| 13 | Supply& Fixing in repair of portable PVC speed breaker of size 500mmx365mmx50mm, Load bearing capacity 2000 kg to 4000Kg is designed so dynamically and compact that it can bear maximum load of it. The body of the speed breaker is made of ABS material. Two highly reflective reflectors moulded in PMMA material are welded with ABS plate through ultrasonic welding process and then fixed on to the speed breaker so that dust and water cannot touch reflectors inside and thus it maintains its reflectivity for a long time, Number of reflectors-8, Colour-Yellow & Black complete all as specified and as directed. |
