Tender For Repair Maintenance And Polishing Painting Of Wooden And Steel Furniture At Bso Yard Under Ge 865 Ews, Leh-Ladakh

Tender For Repair Maintenance And Polishing Painting Of Wooden And Steel Furniture At Bso Yard Under Ge 865 Ews; 1 REPAIR TO CHAIR WRITING :-Opening of joints of damaged/broken member of chair writing where required for replacement including removing of cane, if necessary polishing new parts with French polish including cleaning and preparation of the surface tomatch with existing surface etc. all as directed by Engr-in-chargeFD-280,FD-202,FD-20 2 (a)S&F front leg (left or right ) made out with Ist class HW seasoned teak wood of size and shape as per existing chair or as per Drg all as directed by Engineer-in-Charge. 3 (b)All as per item No 1(a) above but rear leg (left or right) all as directed by EIC. 4 (c) All as per item No 1(a) above but of front/rear/side members of seat bottom 5 (d)All as per item 1(a) above but back Stiffener 6 (e) All as per item 1(a) above but bottom stiffener 7 (f) S&F front Arms rest madeof size and shape as per existing chair or as per Drgall as directed by Engineer-in-Charge. 8 (g) Description all as per item 1 (a) here in before but replacement of shoes with new PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge. 9 (h) Re canning of chair writing 10 (j)M&L for preparation of wooden surface of Chair writing by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade complete all as directed by the Engineer-in-charge. 11 REPAIR TO CHAIR DINNING ;-Opening of joints of damaged/broken member of Chair Dinning where required for replacement including removing of cane, if necessary polishing new parts with French polish including cleaning and preparation of the surface tomatch with existing surface etc. all as directed by Engr-in-chargeFD-279, FD-228 FD-1105 12 (a)S&F front leg (left or right ) made out with Ist class HW seasoned seesham wood of size and shape as per existing chair or as per Drgall as directed by Engineer-in-Charge. 13 (b) All as per item No 2(a) above but rear leg (left or right) 14 (c )All as per item No 2 (a) above butFront/Rear/Side rail 15 (d )As per itm no.2 (a) above but back members of Chair Dinning 16 (e) All as per item 2(a) above but bottom stiffener 17 (f) Description all as per item 2 (a) here in before but replacement of rubber shoes with new PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge. 18 (g)Re-canning of chair dining. 19 (h)M&L for preparation of wooden surface of Chair dining by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade complete all as directed by the Engineer-in-charge. 20 REPAIRING TO CHAIR EASY ;- Opening of joints of damaged/broken member of Chair Easy where required for replacement including removing of cane, if necessary polishing new parts with French polish including cleaning and preparation of the surface tomatch with existing surface etc. all as directed by Engr-in-chargeFD- 229FD-1108 21 (a) Re-canning of chair easy 22 (b) S&F front leg (left or right ) made out with Ist class HW seasoned teak wood of size and shape as per existing Drgall as directed by Engineer-in-Charge. 23 (c )As per item 3 (b) above but Rear leg (left and right) 24 (d )As per item 3 (b) above but Arms rest 25 (e)As per item 3 (b) above but bottom stiffner 26 (f) Description all as per item 3 (a) here in before but replacement of shoes with new PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge. 27 (g)M&L for preparation of wooden surface of chair easy by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade complete all as directed by the Engineer-in-charge. 28 TABLE 900 X 600 WITH / WITHOUT DRAWER:-(a) Repair of table with or w/o drawer for replacement of unserviceable top with prelaminated particle board ext grade 18/19mm thick as per Drg of Make-Greenply /Kitply ISI Marked with Ist class HW teak wood beading 6mm thick all as shown on drawing and as directed by Engr-in-Charge. FD-283/284/TP 29 (b)All as per item 4(a) abovebut replacement ofnew long rail made out of Ist class hard wood complete all as shown on drawing and as directed by Engr-in-Charge. 30 (c) All as per item 4 (a) abovebut replacement of new drawer made out of Ist class hard wood complete all as shown on drawing and as directed by Engr-in-Charge. 31 (d) All as per item 4(a)abovebut replacement ofnew short rail made out of Ist class hard wood complete all as shown on drawing and as directed by Engr-in-Charge. 32 (e) All as per item 4(a) above but replacement ofnew bottom centre stiffener complete all as shown on drawing and as directed by Engr-in-Charge. 33 (f)All as per item 4(a) above but replacement of newknob complete all as shown on drawing and as directed by Engr-in-Charge. 34 (g) All as per item 4(a) above but replacement of rubber shoes of superior quality complete all as directed by Engr-in-Charge. 35 (h) Supply and fixingin repair new legs made out with Ist class HW as per existing or as per Drg. 36 (j)M&L for preparation of wooden surface of table 900 x600 with/without drawer by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade complete all as directed by the Engineer-in-charge. 37 TABLEWRITING :-(a) Removing old unserviceable top and S&F new tops made ofprelaminated particle board 19mm thickof the size and shape a per Drg of Make-Greenply /Kitply ISI Markedwith Ist class HW teak wood beading 6mm thick . 38 (b) All as above butback ply of table writing 39 (c) All asper item 5 (a) above but bottom stiffner of table writing . 40 (d)All as per item 5 (a) above but legs of tables 41 (e)M&L for preparation of wooden surface of table writing by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade complete all as directed by the Engineer-in-charge. 42 REPAIR TO TEAPOY WOODEN (a) Removing unserviceable top of teapoys/Teapoyand new tops of 19mm thick prelaminated particleMake-Greenply /Kitply ISI Marked FD-278 43 (b)All as per item 6 (a) above but new stiffener/long rail /side rails of teapoys . 44 (c) All as per item 6 (a) above but new legs of teapoys 45 (d)M&L for preparation of wooden surface of teapoy wooden by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade complete all as directed by the Engineer-in-charge. 46 REPAIR TO PEG TABLE:- (a) Removing unserviceable top of Peg table and S&F new tops of 19mm thick prelaminated particle boardMake- Greenply/Kitply ISI Marked FD-277 47 (b) All as per item 7 (a) above butnew legs of peg tablemade of Ist class HW. 48 (c)All as per item 7 (a) above butnew long railof Ist class HW. 49 (d) Description all as per Item No7 (c) above but short rail 50 (e)M&L for preparation of wooden surface of table peg by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade complete all as directed by the Engineer-in-charge. 51 REPAIR TO TABLE CENTRE / TABLE CENTRE 2 TIER ;- (a) Taking down old U/S top of tableand S&F new top18/19 mm thick pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading all-round of the top as specifiedand shown on Drg and as directed by Engr-in-Charge.FD-235/274/ 375 52 (b) Descrition all as per item 8 (a) above but S&F of long rail as per Drg Ist class HW. 53 (c) Descrition all as per item 8 (b) above but S&F of new side railIst class HW 54 (d) Descrition all as per item 8 (a) above but& S&F of new leg Ist class HW . 55 (e) Taking down old U/S bottom tier of table centre two tier and S&F new bottom tiermade of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading and as directed by Engr-in-Charge. 56 (f)M&L for preparation of wooden surface of table centre by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade complete all as directed by the Engineer-in-charge. 57 BED PLYWOOD TOP:-(a) Removing of old unserviceable head rest of bed and S&F new head rest as per existing size and shape ofIst class HW seasoned teak wood incl polishing (two or more coats) over a coat of wood filler after preparation of surface.FD-246. 58 (b)Descrition all as per item 9 (a) above butS&F of new foot restas per Drg Ist class HW 59 (c)Descrition all as per item 9(a) above butS&F new ply top of 12mm thick commercial type ISI markedMake- : Century/Kitply/Bhutan Board/National ISI Marked. 60 (d) Descrition all as per item 9 (a) above but wooden stiffeners Ist class Hard woodof size 50x60mm all as shown in Drg 61 (e)Descrition all as per item 9 (a) above but providing of new long rail of Ist class HW. 62 (f)M&L for preparation of wooden surface of bed ply top by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade complete all as directed by the Engineer-in-charge. 63 REPAIR TO TABLE DINING 6/8 PERS (a) Taking out old unsv top from table dining 6 pers and supply new top of18/19 mm thick veneered particle boardsolid core type (1 phase teak veneered particle board solid core type & other side commercial veneered) exterior grade and provided teak wood beading 6 mm thick around fixed with suitable size of steel screw and applying two coat of French polish with touch wood brand polish and fixing the same all as specified and shown in drg and all as directed.FD-273, 64 (b) Description all as per item No . 10(a) here in before but Tabel Dining 8 Pers. 65 (c) Description all as per item No . 10(a) butS&F new legs of teakwood all as shown on drg and directed by EIC. 66 (d) Description all as per item No . 10(a) butS&F new long rail of1st class HW . 67 (e) Description all as per item No . 10(a) but and S&F new short rail of 1st class HW . 68 (f)M&L for preparation of wooden surface table dining 6/8 pers by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade complete all as directed by the Engineer-in-charge. 69 REPAIR TO ALMIRAH LARGE STEEL/ALMIRAH LARGE 1/2 HANGING 1/2 SHELF 70 (a) Removing of old unserviceable 3 waylocking device complete of Almirah Large steel /Almirah large 1/2H x1/2S and S&F new 3 way locking devicemade to shape & size as required and all as specified in drg and directed by Engr-in-charge. 71 (b) Removing of existing old locks of Almirah Large steel/Almirah large 1/2H x1/2 S and S&F new locks of 5 lever with duplicate keys anddirected by Engr-in-charge (Make : RAINA/REENA/BAJRANG) 72 (c)Description all as item No11 (a) but S&F new chromium plated handles including necessary nut, bolts, washer etcall as specified & directed by Engr- in- Charge. 73 (d)Taking out existing shelves and refixing in position including necessary nuts, bolts, washers, clips etc for Almirah large steel/Almirah large1/2H x1/2Sall as directed by Engineer-in-charge. 74 (e)Description all as item No11 (a) but S&F new legs made out of 1mm thick MS sheet made to shape& size all as shown on drawing anddirected by Engineer-in-charge. 75 (f) Description all as item No11 (a) but S&F new shelves made of 1mm thick MS Sheet made to shape by using suitable nuts & bolts and fixing clips all as specified in drg and directed by Engr-in-charge. 76 (g) M &L for providing two coat ofolive green or silver grey paint with spray gun painting over a coat of red oxide primer after preparartion of surface by scrubing/ scraping /dentingall as specified in drg and directed by Engr-in-charge. 77 REPAIR TO ALMIRAH MEDIUM STEEL/ALMIRAH (MEDIUM/SMALL) 1/2 HANGING X 1/2 SHELFFD-1032,FD-243, FD-1034, FD-114 78 (a) All as per Srl item No 11(a) here-in-before but Almirah Medium Steel. 79 (b) All as per Srl item No 11(b) here-in-before but Almirah Medium Steel. 80 (c) All as per Srl item No 11(c) here-in-before but Almirah Medium Steel. 81 (d) All as per Srl item No 11(d) here-in-before but Almirah Medium Steel 82 (e) All as per Srl item No 11(e) here-in-before but Almirah Medium Steel 83 (f) All as per Srl item No 11(f) here-in-before but Almirah Medium Steel 84 (g) M &L for providing two coat ofolive green or silver grey paint with spray gun painting over a coat of red oxide primer after preparartion of surface by scrubing/ scraping /dentingall as specified in drg and directed by Engr-in-charge. 85 REPAIR TO LOCKER STEEL 86 (a) Removing of old broken/ unserviceable conduit pipe and S&F new conduit pipe of size 20mm dia and 1.6 mm thickwith appropriate bracket of steel made to shapeas shown on drawing anddirected by Engineer-in-charge.FD-257FD-1029 87 (b) Removing of old deshaped/broken Steel shelf and S&F new MS Steel shelf of 1 mm thick MS Sheet and fixing it in proper functional position as original shape by using suitable rivets and fixing cleats by providing two coats of OG paint over a coat of primer all as specified and directed by Engr-in-charge. 88 (c) Removing of old broken/ unserviceable existing hasp & staples of Locker steel and S&F new hasp & staples of size 75x30x2mm mild steel chromium plated fixed to steel shutterall as shown on drawing anddirected by Engineer-in-charge. 89 (d)Removing of old broken/ unserviceable existing handle of Locker steel and S&F new handleof size 100mm mild steel chromium plated fixed to steel shutterall as shown on drawing anddirected by Engineer-in-charge. 90 (e) Removing of old unserviceable legs of Locker steel and S&F new legs made out of 1mm thick MS sheet made to shapeall as shown on drawing anddirected by Engineer-in-charge. 91 (f) M &L for providing two coat ofolive green or silver grey paintwith spray gun painting over a coat of red oxide primer after preparartion of surface by scrubing/ scraping /dentingall as specified in drg and directed by Engr-in-charge. 92 REPAIR TO TABLE STEEL 900 x 600 x 760 MM WITH DRAWER/ WITHOUT DRAWERFD-1008,FD-1007 93 (a) Taking down oldU/S top of table steel 900 X 600 X 760 mm with drawer/ without drawer and S&F new top of table steel 900 x 600 x 760 mm made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading all-round of the top as specifiedand shown on Drg and as directed by Engr-in-Charge. 94 (b)Taking down oldU/Sdrawer and S&F new drawermade of 1mm thick MS Sheet as specifiedand shown on Drg and directed by Engr-in-Charge. 95 (c) Repairs to broken mild steel components of table 900 x 600x760mm Steel (with drawer/without drawer) withwelding, including replacing broken /worn out legs/ components with new parts made of square pipe of 25mm x 25mm and 1.6 mm thickness 75mm to 100 mm long by running welding all as specified and directed by Engr-in-charge. 96 (d) Description all as per item No.6 here in before but replacement of rubber shoe with S&F new rubber shoe of superior quality withsuitable size complete all as directed by Engr-inCharge. 97 (e) M &L for providing two coat ofolive green or silver grey paint over a coat of red oxide primer after preparartion of surface by scrubing/ scraping /dentingall as specified in drg and directed by Engr-in-charge. 98 TABLE OFFICE OFFICERS STEEL:- (a) Taking out U/S Top from Table office offrs steel and S&F new topof 18/19 mm pre-laminated partical board exterior grade Make-Novapan/kitlam/Archid ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on drg and as directed by Engr-in-charge.FD-1003,FD- 84 (M), FD-1002 99 (b) Taking out unserviceable locks and S&F new brass lock after repairing of drawer and cupboard of Table Office Officers Steel size and shape as per approved quality as shown on Drg and directed by Engr-in-Charge 100 (c)Taking out oldU/Sdrawer and S&F new drawermade of 1mm thick MS Sheet as specifiedand shown on Drg and directed by Engr-in-Charge. 101 (d) Removing of exsiting old unserviceable rubber shoe of Table office officer steel and S & F new rubber shoe of existing size as specified and directed . 102 (e) M &L for providing two coat ofolive green or silver grey paint over a coat of red oxide primer after preparartion of surface by scrubing/ scraping /dentingall as specified in drg and directed by Engr-in-charge. 103 TABLE OFFICE CLERKSTEEL :- (a) Taking out U/S Top from Table office clerk steel and S&F new top of size 1200x610mm 18/19 mm pre-laminated partical board exterior grade Make- Novapan/kitlam/Archid ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on drg and as directed by Engr-in-charge.FD-1004,FD-84 (M), 104 (b)Taking out unserviceable locks and S&F new brass locks after repairing of drawer of table office clerk steel, size and shape as per Drg as directed by Engr-in Charge. 105 (c)Taking out oldU/Sdrawer and S&F new drawermade of 1mm thick MS Sheet as specifiedand shown on Drg and directed by Engr-in-Charge. 106 (d) Removing of exsiting old unserviceable rubber shoe of Table office officer steel and S & F new rubber shoe of existing size as specified and directed . 107 (e) M &L for providing two coat ofolive green or silver grey paint over a coat of red oxide primer after preparartion of surface by scrubing/ scraping /dentingall as specified in drg and directed by Engr-in-charge. 108 REPAIR TO CHAIR TUBULAR STEEL WIITH/ WITH OUT ARMSFD-75(M) 109 (a)Removing unserviceable seats from chair tubular steel with & w/o Arms and S&F Ist class HW seasonedwood seat as per existing size and shape fixed with suitable bolts, nuts and washer including polishing and recanning complete all as directed by EIC. 110 (b)Ditto-- but steel chair back -do- 111 (c)Taking out US arms rest from steel chair with arms and supply and fixing chair arms rest with suitable bolts, nuts and washer 112 (d)S&F in repair hard rubber shoe black 20mm dia suitable for bottom of steel chair 113 (e) S&F in repair hard rubber cap black suitable for 20mm dia at top of steel chair complete. 114 (f) Repairs to broken mild steel components of chair tubular steel with/ without arms with gas welding, including replacing broken/worn out components with new 20mm dia MS pipe1.6mmthick. 115 (g) M &L for providing two coat ofolive green or silver grey paint over a coat of red oxide primer after preparartion of surface by scrubing/ scraping /dentingall as specified in drg and directed by Engr-in-charge. 116 REPAIR TOTABLE DINING OR ALUMINIUM TOP FD- 165M 117 (a) Repairs to broken mild steel components of table dining ORs Aluminium top with welding, including replacing broken /worn out components with new parts made of MS square pipe of 25mm x 25mm and 1.6 mm thickness 75mm to 100 mm long by running welding all as specified and directed by Engr-in-charge. 118 (b) Removing existing unserviceable top of table dining ORsand providing new top of size 1920 x 680mmmade out of 18/19mm thick commercial ply wood duly covered with 24 gauge aluminium sheet,12 Nos screws wood steel CSK of sizes 40mm shall be used for fixing the table top all as shown in drg andas directed by Engineer-in-charge. 119 (c) M &L for providing two coat ofolive green or silver grey paint over a coat of red oxide primer after preparartion of surface by scrubing/ scraping /dentingall as specified in drg and directed by Engr-in-charge. 120 (d) Removing of exsiting old unserviceable rubber shoe oftable dining ORs Aluminium topand S & F new rubber shoe of existing size as specified and directed . 121 REPAIR TO CHAIR VARANDAH(a) Repairs to broken mild steel components of chair verandah with gas welding, including replacing broken /worn out legs with new 20mm dia MS pipe1.6mmthick 75mm to 100 mm longFD-256 122 (b) Removing existing unserviceable plastic cane of chair Varandah and recaningin mat pattern as per drgcomplete in all respect with 4/5 mm wide 0.4 mm thick partially rounded plastic cane, white colour of Shah Brand all as specified and shown in drg. 123 (c) S & F PVC rubber shoe/Toe of best quality after removing the old unserviceable shoe all as specified and directed. 124 (d) M &L for providing two coat ofwhite paint over a coat of red oxide primer after preparartion of surface by scrubing/ scraping /dentingall as specified in drg and directed by Engr-in-charge. 125 CHAIR WRITING STEEL (a)Removing of old raxine cloth and S&F of new rexine cloth to both seat and back (upholstery) of existing cushion not less than Rs 300/- per mtr as approved by Engr-in-charge. FD-360 126 (b) Removing of old unserviceable foam cushion from chiar writing steel and S&F new foam cushionof existing size for seat and back75mm & 50mm of 28 density respectivelymake Godrej / Sleepwell fixed over wooden frame covered with rexine cloth not less than Rs 300/- per mtr as approved by Engr-in-charge and rest all as per drg . 127 (c)Removing of old wooden arm rest and S&F of new wooden arms rest of existing size and shapeas specified in drg and directed. 128 (d) Removing of exsiting old unserviceable rubber shoe of chair writing steeland S & F new rubber shoe of existing size as specified and directed . 129 (c) M &L for providing two coat ofolive green or silver grey paint over a coat of red oxide primer after preparartion of surface by scrubing/ scraping /dentingall as specified in drg and directed by Engr-in-charge. 130 TABLECOMPUTER :- (a) Taking down old U/S top of table computer and S&F new top of table computer made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading all-round of the top as specified,shown on Drg and as directed by Engr-in-Charge.FD/E6/MAP/ 03 131 (b) All as per srl item No 21 (a) above butS&F newtelescopic channelfor pull out tray, drawer and key board tray of table computerand directed by Engr-in - charge 132 (c) All as per srl item No 21 (a) above butS &F new middle shelf of existing size . 133 (d) All as per srl item No21 (a) above but S &F new bottom shelf of existing size 134 (e) All as per srl item No 21 (a) above butS &F new side pannel of existing size . 135 (f) M&L for preparation of wooden surface by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade complete all as directed by the Engineer-in-charge. 136 (f) All as per srl item No 21 (a) above butS &F new nylon buffer of existing sizeas specified, shown in drg and directed by Engr in charge.. 137 M&L preparation of old wooden and steel surfaces and applying one or more coat of French polish & painting of required shade complete all as directed for the following :- 138 (a)Trastle store Room Steel 139 (b) Stool steel 305x305x510 mm 140 (c)Stool steel 305x305x710 mm 141 (d) Rack Pigeon Hole steel 142 (e) Tableside steel 143 (f) Rack steel six/Seven Tier 144 Deduct Schedule of Credit of Rs (-) 44684.00 (Minus) as listed in Sch A (Contd.). Contract sum shall be arrived after deducting the credit amount.Note:- Tenderers will not quote against this item being a firm amount.

INR 500 /-

INR 44.44 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB