|
| 1 | Dismantling floor, hearth or wall tiling including CM bedding, removing rubbish off the premises complete all as specified and as directed. |
| 2 | Dismantling stone slabs and tilesof any descriptionor thicknessin floors, aprons, riser of steps, skirting, dado etclaid in any mortar complete all as specified and as directed. |
| 3 | M&L for vitrified tiles light shade 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqmasin floors etc. set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:4, complete all as specified and as directed. |
| 4 | All as per item No 03 above, but , asin skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified and as directed. |
| 5 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.18 sqm but not exc 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified and as directed. |
| 6 | All as per item No 05 above, but , asin skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified and as directed. |
| 7 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified and as directed. |
| 8 | M&L for glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in CM (1:3) complete all as specified and as directed. |
| 9 | M&L 18 to 20mm thick granite stone (of any type ) work (table rubbed and polished)in floors, staircase tread & risers of steps, cooking platform, window cill/jambs etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including Rounding, grinding and mirror polishing complete all as specified and as directed.Note: Colour of granite shall be as approved by Engr-In-Charge |
| 10 | Dismantling of ceiling boards including grid of any description fixed in any position with nails or screws etc all as specified and as directed. |
| 11 | S&F for powder coated aluminium snap grid frame work for ceiling 605mm x 605mm using aluminium anodised sections aluminium sections main tee 36.5X25X1.4mm, cross 23.5X26.4X1.4mm, angle 25X25x1.4mmincluding cutting, drilling jointing etc complete including 6mm dia of GI hangers wire suspenders fixed with adjustable connectors and providing 6mm thick E-boards (Classic) 605mm x 605mm size Specified by Engr-in-charge and making good etc complete all as specified and as directed. |
| 12 | Dismantling boarding or sheets/laminates fixed in any position and of any description fixed in any position etc all as specified and as directed. |
| 13 | M&L for 6 to 8mm thick HDF Laminate boards with plain coloured, textured wooden finish / embossed surface, grooved / interlocking boards fixed to the existing flooring over 3mm foam layer fixed using suitable adhessive or as per the manufacturer\"s instrctions etc all as specified and as directed. |
| 14 | M&L for 6 to 8mm thick HDF Laminate boards with plain coloured, textured wooden finish / embossed surface, grooved / interlocking boards as in vertical surfaces / skirtings etc fixed using suitable adhessive or as per the manufacturer\"s instrctions etc complete all as specified and as directed. |
| 15 | Taking down chowkhats or frames with shutters without taking off shutters from framen.exc 1.5 Sqm each complete all as specified and as directed. |
| 16 | S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening as per specification complete all as specified and as directed. |
| 17 | S&F for Factory made solid PVCmolded with particle board core door shutter 28 to 30 mm thick panel design with 2mm thick molded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing complete all as specified and as directed. |
| 18 | S&F in butt hinges extruded aluminium alloy with galvanized mild steel hinge pin ,anodized of hinges 100 mm type B-21 etc complete all as specified and as directed. |
| 19 | S&F extruded aluminum alloy handle fabricated type anodized 150mm long etc complete all as specified and as directed. |
| 20 | S&FAluminum anodized barrel bolt of extruded section 150mm long etc complete all as specified and as directed. |
| 21 | S&F Aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminumalloy etc complete all as specified and as directed. |
| 22 | M&L in repairs to 18 mm thick rubco huat rubwood in built up interiors as in cupboards, shelves wall lining, box structure and including all fitting items complete all as specified and directed. After completing the carpentry works all the visible woods area will be sanding by No.60 & 80 Wood Sanding Paper, after that will be applying Sheenlac make Filler with mixing of NCD Thinner (Sheenlac make), then pasting Chock Putty in the shabby/nailing area which will be sanding with No.120 Sanding Paper, after that will applying Sealer of Sheenlac make and walnut colour stainer, then cutting with No. 320 Sand Paper, after completing the above process will spray Melamine Polish of Berger/Sheenlac make then cutting with No.400 Sanding Paper. Finally will applying Silicon make: Waxpol with soft Banyan Cloth for better shining/finishing. Make of rubber wood members: RUBCO or equivalent |
| 23 | M&L in repairs to Aluminium composite panel sheet of 3.0mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwiched by 2.5mm polyethylene core with PVDF coating of 30.0micron fixed over frame of aluminium tabular section 50x25mmx 2.0mm thick, having panels not exc 1200x1200mm with necessary silicon filling, in approved pattern as in column, beam, wall at any height with necessary scafoldings etc complete all as specified and as directed. |
| 24 | M&L for HDF boards (fire & water proof) of 19mm thick as in cub boards, cabinet, shelves etc & the like with decorative choice lamination on one side and balancing white lamination on other side etc complete all as specified and as directed. |
| 25 | S&F Auto concealed hinges stainless steel grade AISI-316 (type Austenitic anticorrosive in nature) suitable for kitchen cabinets, cub boards, Shelves etc complete all as specified and as directed. |
| 26 | Taking down Aluminium Windows chowkhats or door frames with shutters without taking off shutters from frames exe 1.5 Sqm and n.exc 4 Sqm each complete all as specified and as directed. |
| 27 | Taking down Aluminium Windows and Ventilator chowkhats or frames with shutters without taking off shutters from framen. exe 1.5 Sqm each complete all as specified and as directed. |
| 28 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators, partitions and shutters with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.Note : Supply only glass , wire mesh and particle board shall be measured and paid seperately. |
| 29 | S&F for Powder coated Aluminium grill (minimum thickness of powder coating 50 micron) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in charge. |
| 30 | Supply only plain sheet glass 4.0 mm thick ordinary quality and glazing with aluminum glazing clip in aluminum window shutter not exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 31 | Supply only figured glass, pin head type sheet glass 4.0 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window shutter not exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 32 | Supply only Aluminium alloy wiremesh 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples or beading etc complete all as specified and as directed. |
| 33 | Supply only 12mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to aluminium frame worketc complete all as specified and as directed. |
| 34 | S&F in repairs Aluminium alloy wiremesh 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples or beading etc complete all as specified and as directed. |
| 35 | S&F in repairs, floor door stopper of aluminium alloy body & tongue, anodised with hard drawn spring of 140mm size fixed in floor complete all as specified and directed |
| 36 | Taking up or down 20mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 37 | Taking up or down 25mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 38 | S& F for 20mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcn including all fittings fixed complete to walls, ceiling or in floor etccomplete all as specified and as directed. |
| 39 | S& F for 25mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcm including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and as directed. |
| 40 | S&Fin repairs25mm dia uPVC gate valves with open/shut valves, screwed both ends suitable for PVC pipes etc all as specified and as directed. |
| 41 | Cutting chases in PCC block walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed. |
| 42 | S&F in repairs, stainless steel tubing of any diameter of circular, square or rectangular in shape of grade AISI-316 (type Austenitic anticorrosive in nature) as in railings / grills / designer work including post top cap, bottom plate, cutting, bending, seamless welding and fixing in any type of location incl taking down old railing of any description complete all as specified and as directed. |
| 43 | Demolition of Precast cement concrete block walling built in CM or Cement lime Mortar complete all as specified and as directed. |
| 44 | Demolition of cement concrete un-reinforced in any position and paving not exc 15cm thick above or below ground level complete all as specified and as directed. |
| 45 | M&L precast cement concrete block masonry exc. 10 cm width with solid blockC1 (1:3:6) (using 20 mm graded stone aggregate) and settingin cement mortar (1:6) all as specified. |
| 46 | M&L PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified & directed by Engineer-in-Charge. |
| 47 | Excavating in post holes (or similar holes) each not exc 0.50 Cum, getting out hard/dense soil and removing debris to a distance not exc 500m etc all as specified and as directed. |
| 48 | M&L for plain cement concrete in foundations, filling and mass-concrete type C2 (1:3:6) using 40mm graded stone aggregates complete all as specified and as directed |
| 49 | Dismantling structural steel work complete all as specified and as directed. |
| 50 | Supply &fabricate and fixing in position angle iron posts for fencing posts and struts including flat iron etc and including cutting tops to shape as directed , drilling holes, notching for wire etc flat iron fillets for securing fencing including all necessary welding , drilling, bolting or riveting,confirming to Fe-290 (Gde E-165) complete all as specified and directed. |
| 51 | S&Ffor MS Galvanized with 1.00mm thick PVC coated chain link fencing50mm x 50mm over 3.15mm GI wire including fixed to any type of fencing posts with straining bolts, stiffener rods etc including provision of binding wire if required complete all as specified and as directed. |
| 52 | M&L for mild steel round bars 10 to 12mm dia as required, made to shape for securing chain link fencing etc.,and similar works conforming to Fe-290 Gde E-165 and including preparation and applying two coats of synthetic enamel paint over a coat of red oxideprimer before fixing etc complete all as specified and as directed |
| 53 | M&L for Mild steel screw bolts (machine made) with hexagonal or square head one end and screwed the other, or screwed both ends each screw-wed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long diameter of neck in exc 16mm and n.exc 20 mm etc complete all as specified and as directed |
| 54 | M&L for Providing plain cement concrete of Type B1 1:2:4 (20 mm graded aggregate) as in copings, borders, etc,. rounded or chamfered on edges complete all as specified and as directed |
| 55 | M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfacesof walls finished even and smooth (without using extra cement) complete all as specified and as directed |
| 56 | M&L for preparation on newly plastered wall surface and applying two coats of cement base paint complete all as specified and as directed. |
| 57 | M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed |
| 58 | M&L for preparation of old surfaces of walls and applying one coat of cement base paint including filling of cracks, holes and including leveling the surface which undulation found with cement putty etc. complete all as specified and as directed |
| 59 | Demolition of Reinforced cement concrete as in manhole, drain cover slabs or in simillar works etc complete all as specified and as directed. |
| 60 | M&L for precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate)as in manhole, drain cover slab set in cm 1:6 etc all as specified and directed |
| 61 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia for securing with clips quality conforming to deformed or twisted bars etc all as specified and directed |
| 62 | S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290 Gde E-165 etc complete all as specified and as directed |
| 63 | M&L PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as surfaces channel and drains etc completed all as specified and directed. |
| 64 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc completed all as specified and directed. |
| 65 | Demolition of cement concrete un-reinforced of any description and in any position above or below ground level and debris off the premises etc complete all as specified and as directed. |
| 66 | M&L PCC (1:4:8) type D2 using 40mm graded stone aggregate as in 75mm thick as in sub base complete all as specified & directed by Engineer-in-Charge. |
| 67 | M& L for plain cement concrete type B-1 (1:2:4) (Using 20 mm graded stone aggregate) 75 mm thick as in top layers fo hard standing, pavings etc finished with even and fair without using extra cement etc complete all as specified and directed. |
| 68 | S&F for glossy finished chequered cement concrete tiles 30cmx30cmx25mm thick set jointed with grey cement and pigment and pointed in neat cement slurry over and including 20 mm thick screed bed in CM(1:6) etc all as specified and as directed. |
| 69 | M&L for60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
