Tender For Certain Sanctioned Works Under Aor Of Cwe Bathinda At Bathinda Mil Station, bathinda-Punjab

Tender For Certain Sanctioned Works Under Aor Of Cwe Bathinda At Bathinda Mil Station; 1 Taking down chowkhats or frames with shutters (without taking off shutters from the frames) areanot exceeding 1.50 sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast as required complete all as specified and asdirected. 2 Taking down chowkhats or frames with shutters (without taking off shutters from the frames) areaexceeding 1.50 sqm but not exceeding 4 Sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast as required complete all as specified and asdirected. 3 Taking down shutters only of any description area not exceeding 1.0 sqm each and removing from site complete all as specified and asdirected. 4 Taking down shutters only of any description area exceeding 1.0 sqm and not exceeding 2.0 sqm each and removing from site complete all as specified and asdirected. 5 Taking down shutters only of any description and type area exceeding 1.0 sqm and not exceeding 2.0 sqm each and refixing in same or other opening as directed after necessary easing, oiling, adjustments, minor repairs, adjustment with cutting or fixing plain fillets/planks etc to remove gap between floor and shutter complete all as specified and as directed by Engineer-in- charge. 6 Taking down steel rolling shutter of any description area exceeding 20Sqm but not exceeding 35Sqm each, height appx 6.5m, ball bearings and gear operated, and refixing in same opening and ensuring proper working condition after replacement of ball bearing, repairing to gear, broken/rusted steel members by welding, and necessary any other minor repairs, adjustment /alignment easing to slide, greasing, filling gear oil, stoppage of leakage etc complete all as directed. 7 Supply and fixing factory made uPVC white colour casement (Open-able, double shutter glazed and wire guage, Net Opening area not exceeding 1Sqm ) window/ventilator made of extruded profiles with wall thickness of 2.3mm (± 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 ± 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Including Hardware:[casement handle made of zinc alloyed (white powder coated), But Hinges ofzinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and including 5mm thick toughened glass and Wire cloth Stainless steel 304 Grade, natural finish, 0.63 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed. 8 Supply and fixing factory made uPVC white colour Three track three panels sliding window (area exceeding 1 Sqm and not exceeding 2 Sqm) with fly proof SS wire mesh (Two nos. glazed& one no. wire mesh panels) upto 1.50m height made of (big series) frame 90 x 42 mm & sash 31 x 57 mm both having wall thickness of 2.3 ± 0.2 mm and single/double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality (as per approved sample), including 5mm thick toughened glass and Wire cloth Stainless steel 304 Grade, natural finish, 0.63 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed. 9 Supply and fixing factory made uPVC white colour Three track three panels sliding window (area exceeding 2 Sqm) with fly proof SS wire mesh (Two nos. glazed& one no. wire mesh panels) upto 1.50m height made of (big series) frame 90 x 42 mm & sash 31 x 57 mm both having wall thickness of 2.3 ± 0.2 mm and single/double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality (as per approved sample), including 5mm thick toughened glass and Wire cloth Stainless steel 304 Grade, natural finish, 0.63 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed. 10 Supply and fixing factory made uPVC white colour fixed glazed ventilator made of frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, including Glass- 5mm thick tinted or figured glass pin head type complete all as specified and as directed. 11 Note for uPVC Window/VentilatorNote :(i) The cost of glass, wire mesh, fasteners and all other connected accessories shall deemed to be included in the quoted unit rate. (ii) Net Opening will be measured for payment purpose. (iii) Cost for making good to cutting holes/dismantled portion during taking down old with PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate or cement mortar (1:3) shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. (iv) uPVC frame, sash and mullion extruded profiles ± 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. 12 Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door & other Frames/Chowkhat (Single Rebated) of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note: (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made(ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. 13 Supply and Fixing Factory made single extruded WPC (Wood Polymer Composite) solid door & other Frames/ Chowkhat (Single Rebated) of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed.Note: (i) WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. 14 Supply and Fixing Factory made single extruded WPC (Wood Polymer Composite) solid door & other Frames/ Chowkhat (double Rebated) of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed.Note: (i) WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. 15 Supply and Fixing Factory made single extruded WPC (Wood Polymer Composite) solid door & other Frames/ Chowkhat (double Rebated) of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed.Note: (i) WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. 16 Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed including supply and fixing following items :(a) Stainless Steel (304 Grade) Finished Butt Hinges of size 100mm - 4 nos. per leaf (Table 6 of BIS 12817-2020) BIS marked.(b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf as per table 1, dia of bolt 12mm as per BIS 15833. (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf(d) Stainless Steel (304 Grade) Finished Sliding door Bolt 300 mm - 1 no. per leaf, 16mm dia as per BIS marked clause 3(iii) of BIS 15834-2020.(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf 17 Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed including supply and fixing following items :(a) Stainless Steel (304 Grade) Finished Butt Hinges of size 100mm - 4 nos. per leaf (Table 6 of BIS 12817-2020) BIS marked.(b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf as per table 1, dia of bolt 12mm as per BIS 15833. (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf(d) Stainless Steel (304 Grade) Finished Sliding door Bolt 300 mm - 1 no. per leaf, 16mm dia as per BIS marked clause 3(iii) of BIS 15834-2020.(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf 18 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) decorative type glazed/gauge skelton door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with butt hinges with necessary full body threaded star headed counter sunk S.S screws including S&F wire cloth complete all as specified and as directed including supply and fixing following items:-(a) Stainless Steel (304 Grade) Finished Butt Hinges of size 100mm - 4 nos. per leaf (Table 6 of BIS 12817-2020) BIS marked.(b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf as per table 1, dia of bolt 12mm as per BIS 15833. (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf(d) Stainless Steel (304 Grade) Finished Sliding door Bolt 300 mm - 1 no. per leaf, 16mm dia as per BIS marked clause 3(iii) of BIS 15834-2020.(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf(f) Stainless Steel (304 Grade) (natural finish) wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.40mm, fixing as per manufacture 19 Note for WPC/uPVC Frame/window/shutter(i) Test certificate of Manufacturer to be provided by contractor.(ii) Embossing with Barcode of Manufacturer engraved over each door Frame & shutter is mandatory. (iii) Cost for making good to cutting holes/dismantled portion during taking down old with PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate or cement mortar (1:3) shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. (iv)The cost of all other connected accessories, fixing material shall deemed to be included in the quoted unit rate. 20 Supply & fixing factory made steel window box type using ERW hollow P section and double angle frame, with side hung shutters (glazed shutter and fly proof shutter) complete including grill of 8mm sq bar fixed horizontally @ 100 mm C/C and fittings like hinges, tower bolt, stop leg, handle and duly fixed Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm, fixing of lugs in PCC etc., width, height and design of window as directed by GE Including taking down existing window complete all as specified and as directed. 21 Supply & fixing factory made steel ventilator (fixed type glazed ventilator) box type using ERW hollow P section, fixing of lugs in PCC etc., width, height and design of ventilator as directed by GE Including taking down existing complete all as specified and as directed. 22 Note for SteelWindow/Grills/VentsNote :- (i) Glass and painting shall be measured and paid separately under respective item of Sch (ii) The weight of steel window/ventilator with mongery shall be physically ascertained through a board of officers convened by CWE and payment shall be made only after the actual weight at site. (iii) The weight shall be measured before fixing the glass/wiremesh.(iv) Cost for making good to cutting holes/dismantled portion during taking down old and fixing new hold fast /lugs with PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate or cement mortar (1:3) shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. 23 Material and labour for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and as directed.Note :- (i) Glass & wire mesh shall be measured and paid separately under respective item of Sch 24 Material and labour for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges, pivots, Aluminium mongery/fittings and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and as directed.Note :- (i) Glass & wire mesh shall be measured and paid separately under respective item of Sch 25 Material and labour forAnodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and as directed. 26 Note for Aluminium Frame/Door/Window/Grill(i) The weight of Aluminium section/Frame or complete door/wndow with mongery and aluminium grill shall be physically ascertained through a board of officers convened by CWE and payment shall be made only after the actual weight at site.(ii) The weight shall be measured before fixing the glass/wiremesh. (iii) Cost for making good to cutting holes/dismantled portion during taking down old and fixing new hold fast with PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate or cement mortar (1:3) shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. 27 Dismantling steel work of any description like cooler stand, grills, grating, walk ways, railings, frame work of water tanks, framed work of motor pump, doors, gates and similar work etc but excluding framed truss etc. complete all as specified and as directed. 28 Material and labour for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete including fabrication as directed, including hold fast, locking arrangement, sliding door bolt, stopper etc conforming to Fe-410-W (Gde E-250) quality A, complete all as specified and as directed. 29 Supply & fixing 4mm thick sheet glass ordinary quality in squares / retangular in any size of each pane and fixed complete all as specified and as directed. 30 Supply & fixing 5mm thick sheet glass ordinary quality in squares / retangular in any size of each pane as in aluminium doors, window, partitions and similar work including cutting to shape complete all as specified and as directed. 31 Supply & fixing 10mm thick toughened glass as in hinged doors including cutting to shape, drilling holes, rounding off edges of glass etc., including 2 Nos Glass Door Handle D - SS304, Brushed Steel of size 22 x 300mm and patch fittings, hinges as per requirement, fixing and opening/locking arrangement etc, complete all as specified and as directed. 32 Supply & fixing 12mm thick toughened glass as in floor mounted doors including cutting to shape, drilling holes, rounding off edges of glass etc., including 2 Nos Glass Door Handle D - SS304, Brushed Steel of size 22 x 300mm and patch fittings as per requirement, fixing and opening/locking arrangement etc, complete all as specified and as directed.Note :- Double action floor spring hydraulically regulated shall be measured and paid separately under appropriate item of BOQ 33 Supply & fixing 10mm thick toughened glass as in partitions and similar work including cutting to shape, drilling holes, rounding off edges of glass and including necessary fixing/supporting arrangements like SS cleats, patch fittings etc complete all as specified and as directed. 34 Supply and fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body cover with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, compliance with IS 6315:1992 amended upto date complete all as specified and as directed. 35 Supply & fixing aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed (IS Marked) complete all as specified and as directed. 36 Material and labour for roller venetian blinds (size and design approved by GE) including rails, runners, strips and opening/closing arrangement fixed to opening such as window/ventilators etc. complete all as specified and as directed. 37 Supply & fixing Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, Overall length of cover plate 150mm, complete all as specified and as directed. 38 Supply and fixing mild steel 300mm ordinary rat tail rod pattern spring including roller and roller plate and fixing to frame with steel screw complete all as specified and as directed. 39 Supply and fixing Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed. 40 Supply & fixing in repair/replacement Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed including fixing material in any situation complete all as specified and as directed. 41 Hacking out old broken glass (any thickness, size, quality or description) from metal or any frame including punching or drilling out old glazing pins/beadings and Supply & fixing new 4mm thick sheet glass ordinary quality in squares / retangular not exceeding 0.5sqm in each pane and fixed in any type of doors/windows/ventilators with and including fixing material as per existing or as directed complete all as specified and as directed. 42 Hacking out old broken glass (any thickness, size, quality or description) from metal or any frame including punching or drilling out old glazing pins/beadings and Supply & fixing new 4mm thick figured glass pin head type in squares / retangular not exceeding 0.5sqm in each pane and fixed in any type of ventilators with and including fixing material as per existing or as directed complete all as specified and as directed. 43 Supply & fixingin replacement mild steel 300mm long rat tail rod pattern spring including roller and roller plate and fixing to frame with screw complete all as specified and as directed. 44 M & L for Cup board shutter, shelves made out of WPC board 18/19mm thick, density over 600kg/Cum, shelves fixed with SS brackets/cleats as required complete all as specified and as directed. Note:(i) Accessories such as soft close hinges and handle shall be measured and paid separately as supply only (ii) SS brackets/cleats for fixing the shelves and other minor items not otherwise described shall be deemed to be included in the unit rate quoted.Make of WPC board :- Floresta gold series or Techno commercial equivalent in make mentioned in Appendix B 45 Supply and fixing Stainless Steel Magnetic catcher suitable for Doors Cupboards/Wardrobes fixed with steel screw complete all as specified and as directed by Engineer-in-charge. 46 Supply & fixing 100mm longaluminum anodised hasp & staple, safetytype,with hinge pin including bolt to hinge plate fixed with and including SS screws complete all asspecified and as directed. 47 M & L for fabricating & fixing modular kitchen (kitchen cabinet bottom unit, over head wall unit, Loft unit etc) made out of 16mm thick WPC board, minimum density 600kg/Cum, including fixing with solvent cement adhesive and screws to form cabinet, shelves, wardrobe, drawers and other accessories in modular kitchen cabinet and fixing to wall using rawl plug, to readymade fittings with suitable fasteners, Provided 3 inch adjustable legs for Bottom unit carcase, WPC shelves fixed with support buttons/brackets/cleats as required complete all as specified and as directed.Note:(i) Accessories such as soft close hinges, drawer channels, handles shall be measured and paid separately as supply only but labour for fixing the same and other minor items not otherwise described shall be deemed to be included in the unit rate quoted(ii)The actual net area of WPC board (All sides of cabinet ) as fixed at site shall be measured for payment.(iii)The 3 D design/ drawing of the modular kitchen/cabinets etc shall be provided by the GE before execution of the work. Make of WPC board :- Floresta gold series or Techno commercial equivalent in make mentioned in Appendix B 48 Supply and fixing 1mm thick glossy sunmica sheet white colour on external face of shutter and drawer face and on exposed edges (lipped all around exposed surfaces ) using adhesive /bonding material as per manufacturer’s instruction complete all as specified and as directed.Make :- Merino / Greenlam / Finetouch 49 Supply and fixing 0.725mm thick matt finish sunmica sheet white colour on internal face of shutter and drawer face using adhesive /bonding material as per manufacturer’s instruction complete all as specified and as directed.Make :- Merino / Greenlam / Finetouch 50 Supply and fixing 5mm thick tinted glass fixed with silicon on aluminium profile as kitchen cabinet (over head wall unit ) shutter complete all as specified and as directed.Note:(i) Aluminium black frame profile and soft close hinges shall be measured and paid separately as supply only but labour for fixing the same and other minor items not otherwise described shall be deemed to be included in the unit rate quoted. 51 Supply only soft closing/self closing concealed hinges (cabinet hinge) full overlay, opening angle 105⁰, made of stainless steel (SS-304 grade), nickel plated finish complete all as specified and as directed.Make :- Hafele / Bosney / Hettich 52 Supply only soft closing/self closing channels with sides of drawer (drawer slides or drawer runners ), galvanized steel zinc coated, suitable for min 35 Kg weight (Depth of drawer 510mm and 150mm height) complete all as specified and as directed.Make :- Hettich Innotech or Techno commercial equivalent in Hafele / Bosney 53 Supply only Handle 200mm size, SS304 grade, nickel finish, fancy type complete all as specified and as directed. 54 Supply only aluminium black frame profile 45mm width complete all as specified and as directed. 55 Supply and fixing 6mm thick WPC board on backside of carcase including fixing material complete all as specified and as directed 56 Supply and fixing 9mm thick, 3 inch height PVC skirting at bootom of the carcase (kitchen cabinet bottom unit) including catcher for fixing and easy remove for cleaning complete all as specified and as directed. 57 Supply & fixing in replacement stainless steel sink, AISI 304 quality grade, made out of 1.00mm thick sheet, glossy finish, for kitchen or laboratory, with plugs, washers, waste coupling, waste pipe (flexible) 800mm long, includingbedding in cement mortar to dwarf wall or fixing cast iron cantilever brackets and connecting union to waste pipe; overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mmand making good disturbed portion in CM 1:3 or PCC 1:2:4 complete all as specified and as directed. 58 Supply and fixing in replacement stainless steel sink with drainage board, AISI 304 quality grade, made out of 1.00mm thick sheet, glossy finish, for kitchen, with plugs washers and CP waste couplingof 32mm dia, waste pipe (flexible) 800mm long and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460/928mmx458mm with bowl size 410x 355x185mm/430x355x200 and making good disturbed portion in CM 1:3 or PCC 1:2:4 complete all as specified and as directed. 59 Supply and fixing Kitchen Rack / Dish Rack of size914mmx787mmx250mm (Appx size) glossy finish made out of Food Grade Stainless Steel 0.6 mm thick sheet/strip including necessary arrangements for plates and utencils to keep (Holds up to many plates or bowls To accommodate several place settings, Multipurpose), stylish modern streamline design, rust resistant, easy to assemble and clean including fitting accessories, fixed in position as directed with SS screws/fasteners etc complete all as directed. 60 Supply and fixing stainless steel pipe 25mm bore (as a curtain rod), wall thickness of pipe not less than 1mm and grade SS 202, fixed in position with fixing accessories like Brackets, finial and side holder of same manufacturer including taking down old existing curtain rod any type complete all as specified and as directed.Note : (i) Brackets, finial and side holder shall be measured and paid separately for supply only but the cost for fixing the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.(ii) Cost for screws, rawl plugs as required for fixing shall also shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. 61 Supply only stainless steel 202 grade brackets for fixing of 25mm bore curtain rods complete all as specified. 62 Supply only stainless steel 202 grade finials for fixing of 25mm bore curtain rods complete all as specified. 63 Supply only stainless steel 202 grade side holder for fixing of 25mm bore curtain rods complete all as specified. 64 Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness below or above ground level of any description and in any position and including removing rubbish material from building and thrown in low lying empty area at any distance upto 5Km as directed as direccted from the site complete all as specified and as directed. 65 Material and labour for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of voids in masonry using chemical emulsion@ one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and as directed. 66 Material and labour for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre 300mm apart including drilling depth of holes not less than 300mm and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed. 67 Dismantling of interlocking tile/paver block/brick etc (laid flat or on edge etc) laid dry or pointed complete all as specified and as directed. 68 Dismantling of floor hearth or wall tilling/terrazzo including cement mortar bedding layer but not backing including prepared the surface clean to receive further treatment including removing rubbish material from building and thrown in low lying empty area at any distance upto 2.5 KM as direccted from the site complete all as specified and as directed. 69 Roughening surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust etc. complete all as specified and as directed by Engineer-in-Charge. 70 Dismantling of stone slab tiling including cement mortar bedding layer ( but not backing) and including removing rubbish material from building and thrown in low lying empty area at any distance as direccted from the site complete all as specified and as directed. 71 Material and labour for 20 mm thick bedding layer (screed bed for tiles) in cement mortar (1:4) in grey cement including mixing of liquid WPC in mortar @ as per manufacturer instruction per bag of cement of 50kg, and finish the surface even and fair/rough to receive the tile complete all as specified and as directed.Note :- (i) Liquid Water Proof Compound shall be measured and paid separately as supply only under appropriate item of ScheduleA BoQ.(ii) The labour element of mixing of Liquid Water Proof Compound is included in this item. 72 Material and labour for 15 mm thick bedding layer (screed bed for tiles) in cement mortar (1:4) in grey cement including mixing of liquid WPC in mortar @ as per manufacturer instruction per bag of cement of 50kg, and finish the surface even and fair/rough to receive the tile complete all as specified and as directed.Note :- (i) Liquid Water Proof Compound shall be measured and paid separately as supply only under appropriate item of ScheduleA BoQ.(ii) The labour element of mixing of Liquid Water Proof Compound is included in this item. 73 Material and labour for 10 mm thick bedding layer (screed bed for tiles) in cement mortar (1:4) in grey cement including mixing of liquid WPC in mortar @ as per manufacturer instruction per bag of cement of 50kg, and finish the surface even and fair/rough to receive the tile complete all as specified and as directed.Note :- (i) Liquid Water Proof Compound shall be measured and paid separately as supply only under appropriate item of ScheduleA BoQ.(ii) The labour element of mixing of Liquid Water Proof Compound is included in this item. 74 Supply only liquid water proofing compound complete all as specified and as directed. 75 Material and labour for providing Double charge vitrified coloured tiles (approved shade), area of each tile exceeding 0.36 Sqm but not exceeding 1.44 Sqm, having thickness more than 8mm, premium quality having water absorption less than 0.08%, straight edge, stain free, glossy finish, square marbonite, laid as in floors/skirting etc, set and jointed using type-2 adhesive (thin bed) confirming to IS-15477:2019, fixed the tile using spacer 5mm or as per manufacturer’s instruction and joint filled with epoxy grout matching with the colour of tiles including necessary cutting as per site requirement, complete all as specified and as directed.Note: Screed bed shall be measured and paid separately under respective item of BOQ 76 Material and labour for providing Glazed Vitrified Tiles (GVT) or Porcelain coloured tiles (approved shade, suitable for swimming pool), area of each tile not exceeding 0.04 Sqm, having thickness 8 mm thick, having non-slippery gripped tiles, having water absorption rate less than 0.5%, laid as in floors and vertical area of swimming pool, set and jointed using high-quality, polymer-modified, water-resistant tile adhesive (thin bed), Type 3T confirming to IS-15477:2019 or a similar standard like C2TES1 as per EN 12004, fixed the tile using spacer 5mm or as per manufacturer’s instruction and joint filled with epoxy grout as per approved shade by GE, (grouting with Three Component, High Performance Epoxy Tile Grout, exceeds EN 13888 requirements), tested in accordance with AATCC 30 PART 3, in any position in swimming pool internal / external angles for wall, floor and corners to meet the World Aquatics / FINA criteria,including necessary cutting as per site requirement, complete all as specified and as directed.Note: Screed bed shall be measured and paid separately under respective item of BOQ 77 Material and labour for providing first quality scratch free, Max grip anti-slip vitrified tiles with safety marking area, coloured tiles (approved shade/design), area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm (square/rectangular), having thickness 10 mm thick, having anti-slip properties R-Value R-11 as per German standard (DIN 51130 & 51097), premium quality having water absorption rate less than 0.5%, straight edge, stain free, laid as in floors (external area of swimming pool), set and jointed using type-2 adhesive (thin bed) confirming to IS-15477:2019, fixed the tile using spacer 5mm or as per manufacturer’s instruction and joint filled with epoxy grout matching with the colour of tiles including necessary cutting as per site requirement, complete all as specified and as directed.Note: Screed bed shall be measured and paid separately under respective item of BOQ 78 Material and labour for providing glazed ceramic coloured tiles (approved any shade in any pattern of light & dark/highlighters tiles etc as approved) area of each tile exceeding 0.06 Sqm and not exceeding 0.18Sqm having thickness 7-8 mm thick, Premium quality having water absorption should be between 10% to 20%, straight edge, stain free, glossy finish, laid as on vertical surfaces such as in skirting/dado etc,, set and jointed using type-2 adhesive (thin bed) confirming to IS-15477:2019, fixed the tile using spacer 3mm or as per manufacturer’s instruction and joint filled with epoxy grout matching with the colour of tiles including necessary cutting as per site requirement, complete all as specified and as directed.Note: Screed bed shall be measured and paid separately under respective item of BOQ 79 Material and labour for providing Digital glazed vitrified tiles (DGVT) coloured tiles (any shade in any pattern of light & dark, highlighters tiles etc as approved) area of each tile exceeding 0.42 Sqm and not exceeding 1.0Sqm having thickness 9-10 mm thick, Premium quality having water absorption less than 0.5%, straight edge, stain free, glossy finish, laid as in floors and skirting, set and jointed using type-2 adhesive (thin bed) confirming to IS-15477:2019, fixed the tile using spacer 3mm or as per manufacturer’s instruction and joint filled with epoxy grout matching with the colour of tiles including necessary cutting as per site requirement, complete all as specified and as directed.Note: Screed bed shall be measured and paid separately under respective item of BOQ 80 Material and labour for providing Double charge vitrified coloured tiles (approved light shade), area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, having thickness not less than 8mm, premium quality having water absorption less than 0.08%, straight edge, stain free, glossy finish, square marbonite, laid as in floors and skirting, set and jointed using type-2 adhesive (thin bed) confirming to IS-15477:2019, fixed the tile using spacer 3mm or as per manufacturer’s instruction and joint filled with epoxy grout matching with the colour of tiles including necessary cutting as per site requirement, complete all as specified and as directed.Note: Screed bed shall be measured and paid separately under respective item of BOQ 81 Material and labour for providing Double charge vitrified coloured tiles (approved light shade), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, having thickness not less than 8mm, premium quality having water absorption less than 0.08%, straight edge, stain free, glossy finish, square marbonite, laid as in floors and skirting, set and jointed using type-2 adhesive (thin bed) confirming to IS-15477:2019, fixed the tile using spacer 3mm or as per manufacturer’s instruction and joint filled with epoxy grout matching with the colour of tiles including necessary cutting as per site requirement, complete all as specified and as directed.Note: Screed bed shall be measured and paid separately under respective item of BOQ 82 Material and labour for providing Anti-skid vitrified tiles, matte finish, coloured tiles (approved shade), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, having thickness not less than 7mm, premium quality having water absorption should be between 3% to 6%, straight edge, stain free, glossy finish, laid as in floors, set and jointed using type-2 adhesive (thin bed) confirming to IS-15477:2019, fixed the tile using spacer 3mm or as per manufacturer’s instruction and joint filled with epoxy grout matching with the colour of tiles including necessary cutting as per site requirement, complete all as specified and as directed.Note: Screed bed shall be measured and paid separately under respective item of BOQ 83 Material and labour for providing Anti-skid vitrified tiles, matte finish, coloured tiles (approved shade), area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, having thickness not less than 7mm, premium quality having water absorption should be between 3% to 6%, straight edge, stain free, glossy finish, laid as in floors, set and jointed using type-2 adhesive (thin bed) confirming to IS-15477:2019, fixed the tile using spacer 3mm or as per manufacturer’s instruction and joint filled with epoxy grout matching with the colour of tiles including necessary cutting as per site requirement, complete all as specified and as directed.Note: Screed bed shall be measured and paid separately under respective item of BOQ 84 Material and labour 16-18mm thick green marble (approved shade ), machine cut, duly factory grinding and polishing (table rubbed and polished)as in cooking platform, in steps, jambs, pillars, window-cills, for counter sunk wash basin and like or where directed, set &jointed in and including neat cement slurry @ 3.00 Kg/ Per Sqm and pointing in white cement mixing with pigment to match with shade of marble, including cutting as required including cleaning and extra polishing if required complete all as specified and as directed.Note : (i) Single piece should be used in steps/cills/jambs/shelves/ equal to width of slab, including accomodate the hole for gas pipe/mixer valve (where required) and chamfering/rounding the outer edges, nothing extra shall be paid on this account.(ii) Screed bed shall be measured and paid separately under respective item of BOQ 85 Material and labour 18-20mm thick Granite (approved shade like dark black, mahroom etc ), machine cut, duly factory grinding and polishing (table rubbed and polished) as in cooking platform, in steps, jambs, pillars, window-cills, for counter sunkor table top wash basin, vanities counter, as in skirting and like or where directed,set &jointed in and including neat cement slurry @ 3.00 Kg/ Per Sqm and pointing in white cement mixing with pigment to match with shade of granite, including cutting as required including cleaning and extra polishing if required complete all as specified and as directed.Note : (i) Single piece should be used in steps/cills/jambs/shelves/ equal to width of slab, including accomodate the hole for gas pipe/mixer valve (where required) and chamfering/rounding the outer edges, nothing extra shall be paid on this account(ii) Screed bed shall be measured and paid separately under respective item of BOQ 86 Material and labour for machine cut18-20mm thick (minimum), Kota stone slab (size of slab not less than 550x500mm for flooring including 75mm wide white marble strips (border) all-around of room/verandah, set &jointed in and including neat cement slurry @ 3.00 Kg/ Per Sqm and pointing in white cement mixing with pigment to match with shade of slab, including rubbing /grinding andpolishing by machine, including machine cutting to make it square or rectangular as per site complete all as specified and as directed.Note : (i)Screed bed as required shall be measured and paid separately under respective item of BOQ 87 Material and labour for machine cut 15-18mm thick, Kota stone slab as in skirting, dado and on pillar, set &jointed in and including neat cement slurry @ 3.00 Kg/ Per Sqm and pointing in white cement mixing with pigment to match with shade of slab, including machine cutting to make it square or rectangular as per site complete all as specified and as directed.Note : (i)Screed bed if required shall be measured and paid separately under respective item of BOQ 88 Material and labour for machine cut18-20mm thick (minimum), Kota stone slab in single piece for treads of staircase, set &jointed in and including neat cement slurry @ 3.00 Kg/ Per Sqm and pointing in white cement mixing with pigment to match with shade of slab, including rubbing /grinding andpolishing by machine, including machine cutting to make it square or rectangular as per site and chamfering/rounding the outer edges, complete all as specified and as directed.Note : (i)Screed bed if required shall be measured and paid separately under respective item of BOQ 89 Material and labour for machine cut 15-18mm thick, Kota stone slab as in riser of steps of staircase, set &jointed in and including neat cement slurry @ 3.00 Kg/ Per Sqm and pointing in white cement mixing with pigment to match with shade of slab, including rubbing /grinding andpolishing by machine, including machine cutting to make it square or rectangular as per site complete all as specified and as directed.Note : (i)Screed bed if required shall be measured and paid separately under respective item of BOQ 90 Material and labour for anti skid full body vitrified step tiles 10mm thick bull noses and self embossed or grooved as in treads & landing (single piece length wise upto 1200mm), set and jointed using type-2 adhesive (thin bed) confirming to IS-15477:2019, complete all as specified and as directed. 91 Material and labour for anti skid full body vitrified step tiles 10mm thick as in riser, skirting (single piece length wise upto 1200mm), set and jointed using type-2 adhesive (thin bed) confirming to IS-15477:2019, complete all as specified and as directed. 92 Material and labour for PCC (1:3:6), type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete, in post hole, bed block& similar work etc including form work complete all as specified and as directed. 93 Material and labour for 75 mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection, hard standing, path etc, laid in suitable panels not exceeding 3.00 m length finished even and smooth without using extra cement, 10mm Joints filledwithbituminous sealing compound of grade ‘A’/bitumen mastic filler/sealant complete all as specified and as directed. 94 Material and labour for hard core of broken stone or boulders of gauge exceeding 63mm but not exceeding 100mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and as directed. 95 Material and labour for 100mm thickcement concrete ( 1:4:8),type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and as directed. 96 Material and labour for 75mm thickcement concrete ( 1:4:8),type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and as directed. 97 Material and labour for PCC ( 1:4:8),type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed by Engineer-in-charge. 98 Material and labour for 25mm thick PCC in cement mortar (1:2:4) type B0 using 12.5mm graded stone aggregate as in sub base, the surface finished fair/rough complete all as specified and directed by Engineer-in-Charge. 99 Material and labour for 40mm thick cement concrete 1:2:4, Type-B-1 , using 20 mm graded stone aggregates as in floors and finishing surfaces of concrete topping even and fair (without using extra cement) complete all as specified and as directed. 100 Material and labour for 75mm thick cement concrete 1:2:4, Type-B-1 , using 20 mm graded stone aggregates as in floors and finishing surfaces of concrete topping even and fair (without using extra cement) complete all as specified and as directed. 101 Material and labour for 100mm thick cement concrete 1:2:4, Type-B-1 , using 20 mm graded stone aggregates as in sub base of pavement, hardstanding and finishing surfaces of concrete topping even and fair complete all as specified and as directed. 102 Material and labour for Cement concrete work as in pavement/hard-standing over prepare sub base, flexural strength 40 kg/per square centimetre in field using 20mm nominal size graded crushed stone aggregate, any thickness of concrete, with provision of panels size as directedand surface finished even & smooth including necessary form work complete all as specified and as directed.Note:- (i) Contraction joints, dummy joints shall be measured and paid separately under respective item. 103 Material and labour for Forming Contraction joints 65mm deep x 10mm wide, filled with sealing compound Grade ‘A’ in panel joints including surface preparation, cleaning, complete all as specified and as directed. 104 Material and labour for RCC M25 using 20 mm nominal size graded crushed stone aggregate as in drain including side wall, base, the like; any thickness complete all as specified and as directed 105 Material and labour for formwork to side walls of drains for rough finished flat surfaces of concrete complete all as specified and as directed. 106 Material and labour for 10mm thick heavy duty Outdoor/Parking Tiles of size 300X300mm suitable for light vehicle traffic (Grandura Plus/Endura or equivalent) as in floor/path, any colour, shape / pattern (as approved), set and jointed in neat cement slurry @ 3.00 Kg / Per Sqm complete all as specified and as directed. 107 Material and labour for chequered cement concrete tiles of size 30cm x 30cm x 25mm thick laid as in floor/path, made by table vibratory method using PU/rubber mould,with grey cement and colour pigment any shape, size, colour / pattern (as approved), set and jointed in neat cement slurry @ 3.00 Kg / Per Sqm complete all as specified and as directed. 108 Supply and laying/fixing 60mm thick factory made chamfered edge cement concrete paver block/ interlocking tile of M-35 grade, prepolished & preglazed, with approved colour, design & pattern (laid in required colour & pattern as directed) as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. 109 Supply and laying/fixing 80mm thick factory made chamfered edge cement concrete paver block/ interlocking tile of M-40 grade, prepolished & preglazed, with approved colour, design & pattern (laid in required colour & pattern as directed) as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. 110 Material and labour for PCC (1:2:4), type B-1 using 20 mm graded stone aggregate as in coping, mud stops, packing sides/around of interlocking tiles, bed block, thrust block, for embedded posts & similar work etc including weatherings, slightly rounded or chamfered angles complete all as specified and as directed. 111 Material and labour for PCC 1:2:4type B-1 using 20 mm graded crushed stone aggregate as in surface channels, benching/coping of manholes/drains, including necessary form work etc. complete all as specified and as directed. 112 Material and labour for PCC (1:3:6), type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete, complete all as specified and as directed. 113 Supply and laying at or near ground level factory made kerb stone of M-20 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar (1:3) (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. 114 Material and labour for construction and laying kerb stone of size as directed directly on the road construction site with automatic kerb casting machine (kerb/divider making/laying machine, Highway Engineering), using M-25 grade cement concrete laid in position to the required line, level and curvature, kerb stone cast continuous and making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm) at a distance as directed, including making drainage opening wherever required, including necessary excavation/earth work and making good disturbed surface complete all as specified and as directed. 115 Material and labour for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar (1:3) complete all as specified and as directed. 116 Material and labour for 35mm thick precast cement concrete (1:2:4) typeB-0 using 12.5mm graded stone aggregate as in louvers and jallies (measured solid) including all moulding frame (Pre cast frame) and set in cement mortar (1:6) including necessary form work complete all as specified and as directed. 117 Supply and fixing SFRC (Steel fibre reinforced concrete) cover and frame (heavy duty HD-20 grade designation, ISI marked confirming to IS-12592), clear opening 560X560mm & External size of frame 740X740X90mm including Manhole cover, fixed & set over manhole in CM 1:4 complete all as specified and as directed 118 Supply and fixing SFRC (Steel fibre reinforced concrete) cover and frame (heavy duty HD-20 grade designation, ISI marked confirming to IS-12592), clear opening 900X450mm & External size of frame 1080X630X90mm including Manhole cover, fixed & set over manhole in CM 1:4 complete all as specified and as directed 119 Material and labour for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. (inner girth only measured) complete all as specified and as directed. 120 Material and labour for Extra for forming fair finished drain or channel exceeding 30 cm and not exceeding 55 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. (inner girth only measured) complete all as specified and as directed. 121 Material and labour for Cutting into existing manholes for connecting new drains 150 mm dia to 300mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete as specified and as directed. 122 Dismantling brick terracing tiles single layer from roof laid and pointed in cement mortar ncluding removing from the site complete all as specified and as directed. 123 Demolition/taking out any type roof treatment, any thickness, like mud phuska, APP membraneetc from roofs,including removing/cutting uprooting grass, vegetations and roots of small plants etc on roof and surrounding/parapit wall etc, including cleaning of surface of loose dust, and dirt and cement slurry etc. by means of wire brush, dust removing brush and scraper etc. and washing with water and preparing the roof surface to receive further treatmentincluding removing rubbish material from building and thrown in low lying empty area at any distance upto 5 KM as direccted complete all as specified and as directed.Note :- Only Plan area of roof will be measured for payment.Cost for removing/cutting uprooting grass, vegetations etc from area for surrounding/parapit wall etc shall deemed to be included in unit rate quoted, nothing extra shall be admissible on this account. 124 Removing small grass, roots of small plants etc on roof and surrounding/parapit wall etc, including cleaning of surface of loose dust, and dirt and cement slurry etc. by means of wire brush, dust removing brush and scraper etc. and washing with water and preparing the roof surface to receive further treatment complete all as specified and as directed. 125 Material and labour for repair of surface with GP-2 (General Purpose Grout) or repair mortar uto 15mm thick as per site condition/ manufacturer’s instruction and including cracks shall be repaired with cement admixed with polymer as per manufacturer’s instructions complete all as specified and as directed.Make of material : Sika /Fosroc / Pidilite / Asian Paints / MBTCC (BASF) / I-CanNano or Techno commercial equivalent make approved by CWE in writing from make mentioned in Appx B/ E-in-Cs Br approved list. 126 M and L for cleaning surface of any loose dust, dirt or slurry by means of wire brush, dust removing brush etc. after preparation of surface treated with PU epoxy primer to seal the pores and enhance the adhesive of the coating, after primer applying single component waterproofing liquid membrane based on pure, polyurethane resin cold applied with spray, applied PU membrane shall be UV resistant with SRI (Sun Reflective Index) of 98 with an elongation of 650% +50 and tensile strength not less than 2Mpa. No leakage upto five bars of water pressure. Shore hardness >70 shall be 2.00mm (overall) DFT (Dry film thickness), In two or more layers (each layer minimum 750 micron) or as per manufacturer’s instructions so as to achieve thickness not less than 2.00mm DFT complete all as specified and as directed.Make of material : Sika /Fosroc / Pidilite / Asian Paints / MBTCC (BASF) / I-CanNano or Techno commercial equivalent make approved by CWE in writing from make mentioned in Appx B/ E-in-Cs Br approved list.Note: - (i) Payment will be made after providing warranty certificate for 10 years from the company. (ii)The thickness of the PU membrane shall be checked with cut and seal method and the third-party test to be carried out from NABL approved lab. The sample size for check should be 50x50mm randomly at any location and kept in record. 127 Material and labour for Providing PCC coving/ gola along vertical parapets of size 75 mm X 75 mm with concrete M20 (Nominal Mix) using 20 mm crushed stone aggregate including supply and mixing liquid WPC in mortar @ as per manufacturer instruction per bag of cement of 50kg complete all as specified and as directed. 128 Material and labour for 25mm average thick PCC (1:2:4) type B0 using 12.5mm graded stone aggregate as in roof slab padding, increasing uniformly towards ridges to maintain a chain slope, the top shall be trowelled and finishing the surface even amd smooth complete all as specified and as directed. 129 Demolition of cement concrete and digging out (unreinforced) as in sunken floor area of any description and in any position and including removing rubbish material from building and thrown in low lying empty area at any distance as directed from the site complete all as specified and as directed. 130 Material and labour forwater proofing treatment to RCC sunken slab and adjoining vertical slab as described following any one method complete all as specified and as directed. 131 Method 1 (A) Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, Smart Care Damp proof 2K, having 100% elongation as per ASTM D412, resisting 5 bars hydrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5 Clean all working surface & made free from dirt, grease laitance etc. After inspection for all working area rough surface, cracks & construction joint are treated by polymer modified mortar of 1:1:4 (1 Cement : 1Polymer : 4 Sand). Making Gola of size 75x75mm at junction of vertical & horizontal with the polymer modified mortar of 1:1:4 (1 Cement : 1 Polymer : 4 Sand). The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing and shall have consumption of 1.5kg/sqm per coats, etc, complete as per manufactures specifications.(B)Bore Packing: All the borehole gaps between concrete surface and PVC pipe of various dia upto the neck level shall be filled with non-shrink free flow grout – Smart Care GP Grout having dual shrinkage compensation property. Before the bore packing, surface of the PVC pie and concrete surface will be made rough and sand will be sprinkled with polymer bonding agent.(C) Apply12-15mm plaster on slab and vertical surface admixed with Smart Care Vitalia Neo @200ml per bag of cement before treatment.(D)40 mm dia HDPE pipe to be provided as spout pipe in sunken portion. 132 Method 2 (A) Supplying and applying two component cementitious & acrylic flexible water proofing & protective coating, two coats with 1mm DFT, having Hydrostatic (positive) water pressure resistance (DIN 1048) is 7. Abrasion resistance, cm/km is 0.09 of Dr Fixit Pidifin 2k @ 1.5kg/sqm with a paint brush over existing slabsurface and adjoining vertical surface. The Polyester reinforced coated net of 45g/sqm, 2.5mmx2.5mm is laying on the surface immediately on the first coat of two component modified polymer Dr Fixit pidifin 2k. After removal of all lose materials like dust etc. with wire brush coir brushes from surface to get absolutely cleaned surface free of foreign contaminant filling of crack and patches with polymer based mortar/micro concrete, after that making the gola on surrounding wall’s junction and seal the vertical walls. In case of core cutting on the surface, the joint is seal with non-shrink grout.(B) The coating shall be terminated at 1600mm in toilet/2100mm in bathroom on vertical walls.(C) Apply12-15mm water proof plaster on slab and vertical surface admixed with Dr Fixit pidiproof LW+ @200ml per bag of cement before treatment.(D)40 mm dia HDPE pipe to be provided as spout pipe in sunken portion. 133 Make : Method 1 (Asian paint)/ Method 2 (Dr fixit) or Techno commercial equivalent in make mentioned in Appx Bapproved by CWE Note :- (i)The treatment shall be carried out by authorised applicator (through specialized agency ) approved by CWE as per the manufacturer.(ii) PCC filling under sunken area will be measured & paid separately (iii) Treatment should be conitue upto 450mm height on vertical wall (all sides and floor) of sunken but only plan area of sunken will be measured for payment. 134 Material & Labour for PCC (1:5:10) type E2 using 40mm graded AAC sludge/bats as filling of sunken floors complete all as specified and as directed. 135 Material and Labour for Rebuilding the section of damaged RCC elements to its original size in thickness upto 100mm by providing and casting with ready to use non shrink, cementitious free flow micro-concrete having compressive strength > 60 N/sqmm (28 days) according to ASTM C 1107-99, including providing and fixing of water tight foam faced finish shuttering of minimum 18mm thickness and supporting formwork, all lead fit, mixing, placing, de-shuttering, levelling the surface by grinding off cementitious slurry or cementitious joints differences if any for satisfaction of Engr-in-charge and curing thereof including all required scaffolding/ladders complete all as specified and as directed. Note :- Mode of measurement: per Cum of micro concrete.Make: Sika- SikaRep Microcrete 4/ Fosroc- Renderoc RG/Pidilite Dr Fixit Micro concrete / MBTCC / I-CanNano or Techno commercial equivalent make approved by GE in writing from E-in-Cs Br approved list. 136 Material and Labour for Making V groove of 5mm wide and 5mm deep over crack line by electrically operated angle grinder with diamond concrete saw blade and cleaning it by air blower and Sealing of exposed V groove of 5mm deep and 5mm wide with solvent-free, moisture tolerant thixotropic, two part structural adhesive and repair mortar, based on epoxy resins and special fillers, designed for use at temperatures between +10°C and +40°C, according to ASTM C 88 1-78, Type I, Grade 3, Class B+C, compressive strength >60 N/mm2 (14 days) according to ASTM C 881 : bond strength > 10 N/mm² (7 days) according to ASTM C 882 including all required scaffolding/ladders complete all as specified and as directed.Make: Sika / Fosroc / Pidilite Dr Fixit / MBTCC / I-CanNano or Techno commercial equivalent make approved by CWE in writing from make mentioned in Appx B/ E-in-Cs Br approved list. 137 Material and Labour for Drilling holes of 12mm die upto 100 mm deep holes in structural members at the interval of 300mm in staggered manner or along the crack line in reinforced concrete (RC) structural element including cleaning of the holes by air blower and inserting 12mm die NRV (Non Returnable Valve) nozzle compatible with epoxy injector and having machined external end to receive outlet of Grouting Gun. Fix it inside the hole by applying thixotropic cementitious to ensure complete sealing and allow to cure the system for minimum of 8 hrs before Grouting including nozzle projections, excess putty, if any, over concrete element remove by gridding , levelling and finishing the external surface after completion of the work etc. including all required scaffolding/ ladders, formwork if required as per site requirement complete all as specified and as directed. 138 Material and Labour for Grouting injecting two part, low viscosity, moisture insensitive injection- liquid, based on high strength epoxy resin , by pressure and using pressure epoxy injector with accessories till nozzle refused to accept the grout including mixing of grout having mixed density 1.1 kg/ltr (at + 27ºC) : Viscosity -250 m Pass at + 30ºC and should comply according to ASTM C 881 Type II and IV , Grade-I, class E+F and should have below properties; Compressive strength >= 70 N/Sqmm (7 days) according to ASTM C 579 : Tensile strength -50N / Sqmm after 7 days at +30ºC cure) according to ASTM D 638 : Tensile module- 2000N / Sqmm after 7 days at +30ºC cure) according to ASTM D 638, Bond strength -10.8N / Sqmm (failure in concrete ) after 14 days at +30ºC cure) according to ASTM D 638 : Bond strength : Flexural strength -50 N / Sqmm according to ISO 178. Seal with nozzle with thixotropic epoxy putty after the refusal of grout material from the nozzle. Note :- Leakage through other nozzle or cracks are required to be monitored while grouting and such points to be sealed as and when required without any extra cost including all required scaffolding/ ladders complete all as specified and as directed.Make: Sika / Fosroc / Pidilite Dr Fixit / MBTCC / I-CanNano or Techno commercial equivalent make approved by CWE in writing from make mentioned in Appx B/ E-in-Cs Br approved list. 139 Taking up or down existing galvanised steel water tubing (GI pipe) 15mm bore including fitting/connection from wall, ceiling, floor etc. complete all as specified and as directed. 140 Taking up or down existing galvanised steel water tubing (GI pipe) 20mm bore including fitting/connection from wall, ceiling, floor etc. complete all as specified and as directed. 141 Taking up or down existing galvanised steel water tubing (GI pipe) 25mm bore including fitting/connection from wall, ceiling, floor etc. complete all as specified and as directed. 142 Supply & fixing of 20mm outer dia CPVC pipes SDR 11 including all fittings Plain/brass threaded CPVC SDR 11 (like Elbow, Tee, Socket, Reducer, Union, Bushing, Step over bends, End cap, End Plugs, one side brass/two side brass etc) fixed along walls, ceiling or laying under floors etc and including CPVC solvent cement for jointing complete all as specified and as directed. 143 Supply & fixing of 25mm outer dia CPVC pipes SDR 11 including all fittings Plain/brass threaded CPVC SDR 11 (like Elbow, Tee, Socket, Reducer, Union, Bushing, Step over bends, End cap, End Plugs, one side brass/two side brass etc) fixed along walls, ceiling or laying under floors etc and including CPVC solvent cement for jointing complete all as specified and as directed. 144 Supply & fixing of 32mm outer dia CPVC pipes SDR 11 including all fittings Plain/brass threaded CPVC SDR 11 (like Elbow, Tee, Socket, Reducer, Union, Bushing, Step over bends, End cap, End Plugs, one side brass/two side brass etc) fixed along walls, ceiling or laying under floors etc and including CPVC solvent cement for jointing complete all as specified and as directed. 145 Material and labour for drilling/tapping of existing GI/DI/CI pipe line any dia for new connection/taping from existing main water supply pipe line to GI pipe 25/20mm and including ferrule, MS clamp, nut bolts and all accessories/fittings for providing of connection complete all as specified and as directed.NOTE:- Necessary earth work, jointing material reqd to complete the job deemed to be included in the quoted rate. 146 NOTE FOR CPVC/GI PIPES : (i)Pipes inside the buildings shall be fixed concealed and outside the buildings shall be fixed on the surface along wall with clamps/brackets keeping 100mm away from wall. (ii) Bracket, clamp, nut bolt, fastener, slotted channel etc shall be measured & paid separately under relevant item of BOQ. (iii) Where concealed pipe laying in new location (other than taking out old pipe location) then cutting chases in wall shall be measured & paid separately under relevant item of BOQ. 147 Material and labour for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing, cutting not exc 10 cm girth in brick wall and making good, complete all as specified and as directed. 148 Supply & fixing Rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996, any colour white colour or as directed, of capacity 1000 litres, hoisted and fixed in position including making inlet and out let connection including dismantling/taking down old water storage tanks of any description and capicity with float valve and gate valve complete all as specified and as directed. 149 Supply & fixing Rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996, any colour white colour or as directed, of capacity 500 litres, hoisted and fixed in position including making inlet and out let connection including dismantling/taking down old water storage tanks of any description and capicity with float valve and gate valve complete all as specified and as directed. 150 Supply and fixing CPVC globe or gate valve (ISI marked), heavy duty, plain both ends suitable for 20mm bore pipes and including CPVC solvent cement for jointing complete all as specified and as directed. 151 Supply and fixing CPVC globe or gate valve (ISI marked), heavy duty, plain both ends suitable for 25mm bore pipes and including CPVC solvent cement for jointing complete all as specified and as directed. 152 Supply and fixing ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (polythene float) complete, screwed suitable for 20mm bore iron pipe complete all specified and as directed. 153 Taking down existing shower enclosure /Bib tap/Angular stop cock/basin mixer valve etc and Re-fixing the same position after the building repair work complete and as directed. 154 Taking down old Bib tap/ pillar cock/ Angular Stop Cock/Stop valve/ basin mixer/Sink Mixer/Wall mixer/Over head Shower/ Bottle Trap/ Body Shower/ faucet/ Hand Shower/ Flexible Tube etc and including taking out old any type ordinary fittings measured against BOQ item No 179 to 188 complete all as specified and as directed. 155 Supply and fixing Bib taps,CP,long body with wall flange screwed for 15mm bore brass ferrule and fixed in position complete all as specified and as directed.Make : Jaquar (Cat No. VGP-81037) (VIGNETTE Prime) or equivalent from Cera (Valentina Single Lever Series) or equivalent from Hindware (Fluid Series) or Techno commercial equivalent in make mentioned in Appendix B 156 Supply and fixing Bib taps,CP,long body with wall flange screwed for 15mm bore brass ferrule and fixed in position complete all as specified and as directed.Make : Jaquar Cat No. ALI-CHR-85037 or Techno commercial equivalent in make mentioned in Appendix B 157 Supply and fixing 2 Way Bib Cock with Wall Flange,CP,screwed for 15mm bore brass ferrule and fixed in position complete all as specified and as directed.Make : Jaquar Cat No. OPP-15041PM or Techno commercial equivalent in make mentioned in Appendix B 158 Supply and fixing 2 Way Bib Cock with Wall Flange,CP,screwed for 15mm bore brass ferrule and fixed in position complete all as specified and as directed.Make : Jaquar Cat No. VGP-CHR-81041 or Techno commercial equivalent in make mentioned in Appendix B 159 Supply and fixing pillar tap, CP, Long Neck with Aerator screwed for 15mm bore brass ferrule/PVC connection and fixed in position complete all as specified and as directed.Make : Jaquar (Cat No. CON-021KN) or Techno commercial equivalent in make mentioned in Appendix B 160 Supply and fixing Angular Stop Cock with wall flange, CP, screwed down, screwed for 15mm bore brass ferrule or for union and fixed in position complete all as specified and as directed.Make : JaquarCat No. VGP-81053 or Techno commercial equivalent in make mentioned in Appendix B 161 Supply and fixing Angular Stop Cock with Wall Flange,CP,screwed for 15mm bore brass ferrule and fixed in position complete all as specified and as directed.Make : Jaquar Cat No. OPP-15053PM or Techno commercial equivalent in make mentioned in Appendix B 162 Supply and fixing Angular Stop Cock with Wall Flange,CP,screwed for 15mm bore brass ferrule and fixed in position complete all as specified and as directed.Make : Jaquar Cat No. KUP-35053PM or Techno commercial equivalent in make mentioned in Appendix B 163 Supply and fixing Stop valves, fancy type, CP with long shank and cup ( concealed type ), exposed part kit with wall flange and regular body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete all as specified and as directed.Make : Jaquar(Cat No. VGP-81083K (Vintage Prime) & ALD 083) or equivalent from Cera (Valentina Single Lever Series) or Techno commercial equivalent in make mentioned in Appendix B 164 Supply and fixing central hole basin mixer with regular spout without Popup Waste System, chromium plated, for mixing hot & cold water, complete with fittings, 450mm long braided hoses with connection and nut for WHB complete all as specified and as directed. Make : Jaquar Cat No. FLR-5167NB or Techno commercial equivalent in make mentioned in Appendix B 165 Supply and fixing central hole basin mixer valve with regular spout, 15mm bore, brass chromium plated, for mixing hot & cold water, complete with fittings, 450mm long braided hoses with connection and nut for WHB complete all as specified and as directed.Make : Jaquar Cat No. CQT-CHR-23167B or Techno commercial equivalent in make mentioned in Appendix B 166 Supply and fixing central hole basin mixer single lever without Popup Waste System, chromium plated, for mixing hot & cold water, complete with fittings, 450mm long braided hoses with connection and nut for WHB complete all as specified and as directed. Make : Jaquar Cat No. KUP-35011BPM or Techno commercial equivalent in make mentioned in Appendix B 167 Supply and fixing single lever sink mixer with swinging spout,with connecting legs & wall flanges, wall mounted, fency type chromium plated, screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and as directed by Engineer-in-charge.Make : Jaquar Cat No. VGP-81165or Techno commercial equivalent in make mentioned in Appendix B 168 Supply and fixing Wall Mixer with Connector for Hand Shower arrangement with Connecting Legs, Wall Flanges & Wall Bracket for Hand Shower complete all as specified and as directed. Make : Jaquar Cat No. QQT-CHR-7267or Techno commercial equivalent in make mentioned in Appendix B 169 Supply and fixing Chromium plated overhead shower with Rubit Cleaning System (Square Shape Single Flow) of size 200mm X 200mm with shower arm of 450mm long 20mm dia round shape with 90º bend for wall mounted shower with flange of same make and incl all necessary accessories as recommended by manufacturer for fixing complete in all respect all as specified.Make : Jaquar (Shower-OHS-35497, Shower Arm-SHA-479L450) or Techno commercial equivalent in make mentioned in Appendix B 170 Supply and fixing Chromium plated overhead shower with Rubit Cleaning System (Square Shape Single Flow) of size 200mm X 200mm with shower arm of 600mm long 20mm dia round shape with 90º bend for wall mounted shower with flange of same make and incl all necessary accessories as recommended by manufacturer for fixing complete in all respect all as specified.Make : Jaquar (Shower-OHS-1619, Shower Arm-SHA-479L600) or Techno commercial equivalent in make mentioned in Appendix B 171 Supply and fixing Chromium plated overhead shower 100mm dia with shower arm of 450mm long 20mm dia round shape with 90º bend for wall mounted shower with flange of same make and incl all necessary accessories as recommended by manufacturer for fixing complete in all respect all as specified.Make : Jaquar (Shower-OHS-1989, Shower Arm-SHA-479L450) or Techno commercial equivalent in make mentioned in Appendix B 172 Supply and fixing Bottle Trap 32mm Size with 250mm & 190mm Long Wall Connection Pipes & Wall Flangecomplete all as specified and as directed. Make : Jaquar Cat No. ALD-769L250x190 or Techno commercial equivalent in make mentioned in Appendix B 173 Supply and fixing Body Shower Wall Mounted 100X100mm Square Shape (ABS) with rubit cleaning system chromium plated, fixed on wall complete all as specified and as directed.Cat part No BSH-1751 of Jaquar or Techno commercial equivalent in make mentioned in Appx B 174 Supply and fixing sensor faucet for wash basin (Battery Operated ), complete with fittings, 450mm long braided hoses with connection and nut for WHB complete all as specified and as directed. Make : Jaquar (Cat No. SNR-35017PM or Techno commercial equivalent in make mentioned in Appendix B 175 Supply and fixing health faucet (Hand Shower) Stainless steel, including 1 meter long 8mm dia flexible tube and including wall hook and fixing material, making connections and fixed in position complete all as specified and as directed. Make : Jaquar (Cat No. ALD-SSF-573M or Techno commercial equivalent in make mentioned in Appendix B 176 Supply & fixing in Single Lever Basin Mixer without Popup Waste, with 450mm Long Braided Hoses and Base Flange complete all as specified and as directed.Make : Jaquar Cat No. LAG-GBP-91011BW or Techno commercial equivalent in make mentioned in Appendix B 177 Supply & fixing Single Lever Basin Mixer without Popup Waste, with 450mm Long Braided Hoses and Base Flange complete all as specified and as directed.Make : Jaquar Cat No. LAG-BGP-91011BWF or Techno commercial equivalent in make mentioned in Appendix B 178 Supply & fixing Maze Metal Hand Shower 90mm Round Shape Single Flow with Rubit Cleaning System complete all as specified and as directed.Make : Jaquar Cat No. HSH-GBP-1653PD or Techno commercial equivalent in make mentioned in Appendix B 179 Supply & fixing Maze Metal Hand Shower 90mm Round Shape Single Flow with Rubit Cleaning System complete all as specified and as directed.Make : Jaquar Cat No. HSH-BGP-1653PD or Techno commercial equivalent in make mentioned in Appendix B 180 Supply & fixing Flexible Tube 8mm dia. & 1.5M Long with Nuts complete all as specified and as directed.Make : Jaquar Cat No. SHA-GBP-549D8 or Techno commercial equivalent in make mentioned in Appendix B 181 Supply & fixing Flexible Tube 8mm dia. & 1.5M Long with Nuts complete all as specified and as directed.Make : Jaquar Cat No. SHA-BGP-549D8 or Techno commercial equivalent in make mentioned in Appendix B 182 Supply & fixing Shinny Shower Panel 1600X200mm With Chrome Plated In Stainless Steel Finish, complete all as specified and as directed.Make : Jaquar Cat No. SHP-SSF-ST8896 or Techno commercial equivalent in make mentioned in Appendix B 183 Supply & fixing Cloud Thermostatic Shower Mixer Body complete all as specified and as directed.Make : Jaquar Cat No. QLD-CHR-309661C or Techno commercial equivalent in make mentioned in Appendix B 184 Supply & fixing Exposed Part Kit of Cloud Touch Shower System with 3 outlets for connection to Rain, Hand Shower & Body Shower complete all as specified and as directed.Make : Jaquar Cat No. QLD-GBP-309683KRHB (Compatible with QLD-CHR-309661C) or Techno commercial equivalent in make mentioned in Appendix B 185 Supply & fixing Exposed Part Kit of Cloud Touch Shower System with 3 outlets for connection to Rain, Hand Shower & Body Shower complete all as specified and as directed.Make : Jaquar Cat No. QLD-BGP-309683KRHB(Compatible with QLD-CHR-309661C) or Techno commercial equivalent in make mentioned in Appendix B 186 Supply & fixing duoflo shower square shape size 450X450MM AISI 304 stainless steel with RGB LED light remote control & installation kit for false ceiling Chromo therapy (RGB): LED x 0.23W with 12V Power Supply (SMPS) Including Controller, connecting to AC 100-240V, 50-60Hz, 2-functions (Rain and Waterfall) complete all as specified and as directed.MAKE : Jaquar Cat No. OHS-GBP-1687 or Techno commercial equivalent in make mentioned in appendix B 187 Supply & fixing duoflo shower square shape size 450X450MM AISI 304 stainless steel with RGB LED light remote control & installation kit for false ceiling Chromo therapy (RGB): LED x 0.23W with 12V Power Supply (SMPS) Including Controller, connecting to AC 100-240V, 50-60Hz, 2-functions (Rain and Waterfall) complete all as specified and as directed.MAKE : Jaquar Cat No. OHS-BGP-1687 or Techno commercial equivalent in make mentioned in appendix B 188 Supply & fixing Sliding Rail 19mm dia, & 600mm Long Round Shape with Hand Shower Holder complete all as specified and as directed.Make : Jaquar Cat No. SHA-GBP-1197NPD or Techno commercial equivalent in make mentioned in Appendix B 189 Supply & fixing Sliding Rail 19mm dia, & 600mm Long Round Shape with Hand Shower Holder complete all as specified and as directed.Make : Jaquar Cat No. SHA-BGP-1197NPD or Techno commercial equivalent in make mentioned in Appendix B 190 Supply & fixing Wall Outlet 35X25X25mm Square Shape with 15mm Thread to Connect Hand Shower Pipe & Flange complete all as specified and as directed.Make : Jaquar Cat No. SHA-GBP-1195S or Techno commercial equivalent in make mentioned in Appendix B 191 Supply & fixing Wall Outlet 35X25X25mm Square Shape with 15mm Thread to Connect Hand Shower Pipe & Flange complete all as specified and as directed.Make : Jaquar Cat No. SHA-BGP-1195S or Techno commercial equivalent in make mentioned in Appendix B 192 Supply & fixing in replacement Rimless Single Piece WC With PP Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fittings, Fixing Accessories And Accessories Set, Size: 370x665x750 mm, S Trap- 220 mm, including taking out old any type ordinary WC complete all as specified and as directed.Make : Jaquar Cat No. CNS-WHT-853S220SPPSM or Techno commercial equivalent in make mentioned in Appendix B 193 Supply & fixing in replacement Fully Automatic Rimless Floor Mounted WC With Electronic PP Seat Cover - Auto Open, Adjustable Seat, Air, Water temperature, Night light, Fixing Accessories Set, Size: 390x685x465 mm, S Trap- 300 mm, including taking out old any type ordinary WC complete all as specified and as directed.Make : Jaquar Cat No. ITS-WHT-89853S300PPPMAT or Techno commercial equivalent in make mentioned in Appendix B 194 Supply & fixing in replacement Table Top Basin With Three Tap Hole, Size: 600x450x175 mm including CP coupling and taking out old any type WHB complete all as specified and as directed.Make : Jaquar Cat No. LAS-WHT-91931W3TH or Techno commercial equivalent in make mentioned in Appendix B 195 Supply & fixing in replacement Table Top Basin of Size: 600x440x150mm, including CP coupling and taking out old any type WHB complete all as specified and as directed.Make : Jaquar Cat No. KUS-WHT-35931PM or Techno commercial equivalent in make mentioned in Appendix B 196 Supplying, installing Bath Cabin/Shower Enclosure of size 2801-3200MM X2400MM, hinged door shutter, partition for Urinal and WC area made out of 8mm thick fluted glass including installation and necessary accessories ie hinges, patch fittings, SS cleats/bracket/angle etc complete all as specified and as directedJaquar Cat No. JSE-BLM-B840L2832H24X or Techno commercial equivalent approved by GE 197 Supplying, installing Bath Cabin/Shower Enclosure of size 2801-3200MM X2400MM, hinged door shutter, partition for Urinal and WC area made out of 8mm thick fluted glass including installation and necessary accessories ie hinges, patch fittings, SS cleats/bracket/angle etc complete all as specified and as directedJaquar Cat No. JSE-ABR-B840L2832H24X or Techno commercial equivalent approved by GE 198 Supply and fixing Stainless Steel Towel Rack 600mm Long Without Lower Hangers but with 3 hooks,including all fixing accessories, fixed in position including taking out any type towel rail/ring complete all as specified and as directed. CAT PART No. ACN-1181FHS of Jaquar or Techno commercial equivalent in make mentioned in Appendix B 199 Supply and fixing Towel Rack with Lower Hanger (Stainless Steel) without hook,including all fixing accessories, fixed in position including taking out any type towel rail/ring complete all as specified and as directed. Make : Jaquar Cat No. AHS-CHR-1581 or Techno commercial equivalent in make mentioned in Appendix B 200 Supply and fixing Single Towel Rail, 45 cm long including all fixing accessories, fixed in position including taking out any type towel rail/ring complete all as specified and as directed. Make : Jaquar Cat No. CPA-CHR-1111L450 or Techno commercial equivalent in make mentioned in Appendix B 201 Supply & fixing single towel rail 600mm long stainless steel, including taking out any type towel rail/ring complete all as specified and as directed.Make : Jaquar Cat No. CAN-GBP1111S M or Techno commercial equivalent in make mentioned in Appendix B 202 Supply & fixing single towel rail 600mm long stainless steel, including taking out any type towel rail/ring complete all as specified and as directed.Make : Jaquar Cat No. ACN-BGP1111SM or Techno commercial equivalent in make mentioned in Appendix B 203 Supply and fixing Towel Ring Round fancy typeincluding all fixing accessories, fixed in position including taking out any type towel rail/ring complete all as specified and as directed. CAT PART No. AQN-CHR-7721 of Jaquar or Techno commercial equivalent in make mentioned in Appendix B 204 Supply and fixing Stainless Steel Towel Ring including all fixing accessories, fixed in position including taking out any type towel rail/ring complete all as specified and as directed. CAT PART No. CAN-1121BN of Jaquar or Techno commercial equivalent in make mentioned in Appendix B 205 Supply and fixing in replacement PVC Bathroom mirror cabinet of appx size 450mm X 350mm X 140mm / 450mm X 380mm X 140mm (Compact Mirror Cabinet, Concealed shelves) approved quality complete all as specified and as directed. 206 Supply and fixing in replacement Toilet Roll Holder with Stainless Steel Flap complete all as specified and as directed. Make - Jaguar Cat Part No ACN-1153S or Techno commercial equivalent in make mentioned in Appendix B 207 Supply and fixing in replacement soap dish, stainless steel of suitable size to accommodate soap, tooth brush and tooth paste complete all as specified and as directed. 208 Supply and fixing in replacement Stainless steel fancy type peg set of six and fixed in position with steel screws complete all as specified and as directed. 209 Supply and fixing in replacement Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. 210 Supply and fixing in replacement glass shelf 550mm long with CP fancy type bracket /railing complete all as specified and as directed.Cat part No AQN-CHR-7771 of Jaquar or Techno commercial equivalent in make mentioned in Appx B 211 Supply and fixing in replacement glass shelf 550mm long with CP fancy type bracket /railing complete all as specified and as directed.Cat part No AQN-SSF-7771 of Jaquar or Techno commercial equivalent in make mentioned in Appx B 212 Supply and fixing in replacement sheet glass corner assembly of 300X300mm/250x250mm for corners consisting of 5.5mm thick glass shelf and with bevelled edges/hatching of edges fixed with stainless steelD bracket fixed and railing complete all as specified and as directed.Cat part No ACN-1173 of Jaquar or Techno commercial equivalent in make mentioned in Appx B 213 Supply and fixing in replacement Soap Dispenser chromium plated with Glass bottle, fixed on wall with chromium plated brass screws and PVC plug complete all as specified and as directed.Cat part No AKP-CHR-35735P of Jaquar or Techno commercial equivalent in make mentioned in Appx B 214 Supply and fixing in replacement Soap Dispenser - Automatic capacity: 0.8L material: aluminium/ABS finish: chrome/black, fixed on wall with chromium plated brass screws and PVC plug complete all as specified and as directed.Cat part No SDR-BLC-DJ0160ASN of Jaquar or Techno commercial equivalent in make mentioned in Appx B 215 Supply and fixing Soap in replacement Dish Holder chromium plated, fixed on wall with chromium plated brass screws and PVC plug complete all as specified and as directed.Cat part No ACN-1131N of Jaquar or Techno commercial equivalent in make mentioned in Appx B 216 Supply and fixing Curved shaped urinal partition with frosted glass 8mm thick size 900mm height and 450mm wide including SS cleat/bracket complete all as specified and as directed.Cat part No JSE-CHR-110UC450X of Jaquar or Techno commercial equivalent in make mentioned in Appx B 217 Supply and fixing any size as directed bevelled edge mirror of selected quality 6-6.3mm thick glass mounted on PVC sheet, rounding off edges of glass, and shall be fixed at wall with CP studs, complete all as specified and as directed. 218 Supply and fixing PVC connection 15 mm size of length 600 mm with PTMT nuts of approved qualitycomplete all as specified and as directed. 219 Supply and fixing PVC connection 15 mm size of length 450 mm with PTMT nuts of approved qualitycomplete all as specified and as directed. 220 Supply & fixing in replacement vitreous china Oval Shape Table Top Basin Size (mm) 595x445x135 mm, Ceramic Wash Basin, white, including 32mm chromium plated waste coupling and PVC waste pipe including fixing material for wash basin on granite slab and including making hole in granite slab for coupling, and taking down existing WHB of any description/size complete all as specified and as directed.Make : Jaquar (JDS-WHT-25931) or Techno commercial equivalent in make mentioned in Appendix BNote: Slab shall be measured and paid separately 221 Supply and fixing in repair vitreous china premium/1st quality wash basin (under counter), white/ivory/off white, size 460x310x220mm/550x400mmx220 including S&F all accessories as recommended by manufacturer and incl. PVC bottle trap with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union andincl 32mm brass CP waste coupling and complete fixed in position in all respect as per manufacturers instructions complete all as specified and as directed.Note: Slab shall be measured and paid separately 222 Supply & fixing in replacement vitreous china wash basin, white, flat back of size 550mm x 400mm, including 32mm chromium plated waste coupling and PVC waste pipe (flexible)600mm long including bracket and cutting for and pinning in end of bracket or erecting with long screwed shanks & fly-nuts, flange end bedded in red lead cement complete all as specified and as directed. 223 Supply & fixing in replacement vitreous china wash basin with pedestal, white, flat back of size 550mm x 400mm, including 32mm chromium plated waste coupling and PVC waste pipe (flexible)600mm long including fixing material as per manufacturers complete all as specified and as directed. 224 Supply and fixing vitreous china premium/1st quality wall hung water closet with P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc., and incl. plastic soft close seat cover as recommended by manufacturer for particular model closed pattern with flat bottom etc; and incl S&F of all necessary accessories set like rag bolts/gel gasket/hinges, SS jet spray with 01 mtr long PVC pipe with CP connector etc as recommended by manufacturer for fixing, packing and taking down existing WC of any description/size complete in all respect all as specified.Make : Jaquar (Continental Series-CNS-WHT-963N or Techno commercial equivalent in make mentioned in Appendix B 225 Supply and fixing in replacement health faucet (Hand Shower) fancy type, CP including 1-1.2 meter long 8mm dia flexible tube in chrome finish and including wall hook and fixing material, making connections and fixed in position complete all as specified and as directed. Make: JaquarALD-573 / Hindware (contessa plus series)/ Cera (Ocean series) or Techno commercial equivalent in make mentioned in Appendix B 226 Supply & fixingin replacement vitreous china wash down water closet pan (pedestal pattern, EWC) white clour (excluding flushing cistern and flush pipe) including connection to drain and to flushing pipe anti syphonage etc., including plastic water closet seat with cover (white clour) closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including stainless steel chromium plated jet spray with 01 mtr long PVC pipe with CP connector and necessary nut bolts and with necessary CP screws and plug for fixing WC complete all as specified and as directed. 227 Supply & fixing in replacement vitreous China squatting pan Orissa pattern white of size 580mmx440mm white with integral foot rests, excluding flushing cistern, flush pipe above floor but including uPVC P or S trap setsuitable bore and including setting the trap and pan in lime concrete (1 lime, 2 sand or surkhi and 5 aggretate), min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing, including PVC flush pipe upto finished floor level, joints of flush pipe and trap make leakproof and testing upto entire satisfaction of Engineer-in-charge before filling concrete complete all as specified and as directed. 228 Supply & fixing in replacement vitreous china urinal, half stall type, white, as approved by GE,including providing and fixing plugs,bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, 32 mm dia full threaded PTMT waste coupling, 32mm dia waste pipe and water spreader, pointing around urinal back in cement mortar,including taking down old urinal with fittings complete all as specified and as directed. 229 Supply & fixing in replacement Vitreous China Urinal, full stall, white as approved by GE , including connections to flushing pipe and outgoing pipes, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement;, flush pipe, grating, including CP urinal spreader, CP connection, drain pipe and connection etc complete all as specified and as directed. 230 Supply & fixing in replacement Vitreous China Urinal, wall mounted type of size 480x300x740 mm, white, including connections to flushing pipe and outgoing pipes, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement;, flush pipe, grating, as approved by GE including Sensor Flushing Valve for Urinal with Complete Kit (Battery Operated) , CP connection, drain pipe and connection etc complete all as specified and as directed.Make : Jaquar (Cat No. URS-WHT-13255 and SNR-51097 or Techno commercial equivalent in make mentioned in Appendix B 231 Supply and fixingconcealed flushing cistern of PVC 8 ltr. cap with dual flushing system, valveless syphonic action type, with inlet/outlet, ball valve, float and including brackets and connection to pipe etc. and incl S&F of all necessary accessories/installation kit and S type drain pipe connetion set for wall hung WC etc as recommended by manufacturer for fixing, packing and including S&F of actuator knob/flush plates and and taking down existing of any description/size surface mounted complete in all respect all as specified.Make : Jaquar (Concealed Cistern-JCS-WHT-2400S, Flush Plate-JCP-CHR-812415) or Techno commercial equivalent in make mentioned in Appendix B 232 Supply and fixing in replacement 10 litres capacityPVCvalveless syphonic action type low level flushing cistern white with inlet, ball valve, float, handleincluding brackets and 32mm dia PVC flush pipe complete all as specified and as directed. 233 Taking down any type of soil waste, vent pipe (CI any size or pattern) including all fittings, heads, shoes, bends, branch piece, Y connection, cowletc fixed along wall/floor complete all as specified and as directed. 234 Taking down any type of drain/rain water pipes (PVC SWR any size or pattern) including all fittings, heads, shoes, bends, branch piece, Y connection, cowletc fixed along wall/floor complete all as specified and as directed. 235 Supply & fixing 110mm bore uPVC pipesgrade Bsingle socketedin any length with rubber ring joints, fixed along walls keeping 100mm away from wall,joints fixed with pipe joint lubricant including uPVC fittings/ Fixture like bend/tees of any radious/junction (double T/Y, socket)equal or unequal (fittings with or without access door as per requirements and as directed), reducer any type, vent cowls etc., complete all as specified and as directed.Note:- (i) Bracket, clamp, nut bolt, fastner, slotted channel etc shall be measured & paid separately under relevant item of BOQ. (ii) The testing for leakage of pipe shall be done before completion as directed by AGE. (iii) The separate pipes shall be provided for Sewage and drain system in all floors, No combination should be done. 236 Supply & fixing 75mm bore uPVC pipesgrade Bsingle socketedin any length with rubber ring joints, fixed along walls keeping 100mm away from wall,joints fixed with pipe joint lubricant including uPVC fittings/ Fixture like bend/tees of any radious/junction (double T/socket)equal or unequal (fittings with or without access door as per requirements and as directed), reducer any type, vent cowls etc., complete all as specified and as directed.Note:- (i) Bracket, clamp, nut bolt, fastner, slotted channel etc shall be measured & paid separately under relevant item of BOQ. (ii) The testing for leakage of pipe shall be done before completion as directed by AGE. (iii) The separate pipes shall be provided for Sewage and drain system in all floors, No combination should be done. 237 Supply & fixing 50mm bore uPVC pipesgrade Bsingle socketedin any length with rubber ring joints, fixed along walls keeping 100mm away from wall or fixed as a spout/over flow pipe of tank,joints fixed with pipe joint lubricant including uPVC fittings/ Fixture like bend/tees, vent cowls etc., complete all as specified and as directed.Note:- (i) Bracket, clamp, nut bolt, fastner, slotted channel etc shall be measured & paid separately under relevant item of BOQ. (ii) The testing for leakage of pipe shall be done before completion as directed by AGE. (iii) The separate pipes shall be provided for Sewage and drain system in all floors, No combination should be done. 238 Supply & fixing Bracket, Stack clamp, nut bolt, fastner, slotted channel etc suitable for uPVC pipe of any dia 110/75/50mm and for CPVC pipe of dia 20/25/40mm, all made out of Galvanised iron material with hot dip zinc aluminium flake coated, size and shape of bracket and clamp as directed so that pipe keeping 100mm away from wall complete all as specified and as directed.Note :- The weight of Bracket, Stack clamp, nut bolt, fastner, slotted channel etc shall be physically ascertained through a board of officers convened by CWE and payment shall be made only after the actual weight at site. 239 Supply & fixing in replacement uPVC P trap 110mm bore long neck including jointing with pipe joint lubricant, including PCC work complete all as specified and as directed. 240 Supply & fixing in replacement uPVCfloor trap 110mm bore long neck with stainless steel grating including jointing with pipe joint lubricant, including PCC work complete all as specified and as directed. 241 Supply & fixing in replacement uPVCfloor trap 75mm bore long neck with stainless steel grating including jointing with pipe joint lubricant, including PCC work complete all as specified and as directed. 242 Supply & fixing in replacement PVC (SWR) gully trap 125 X 110 mm, type b, setting and jointing with solvent cementcomplete all as specified and as directed. 243 Supply & fixing stainless steel Grating 100-125 mm dia with or without waste hole complete all as specified and as directed. 244 Taking down cement plaster from brickwalls/soffits of roof projections & chajjas /ceilings etc. including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed. 245 Material and labour for plastering 15mm thick with ready mix cement plaster material on external surface of Brick walls/chajja/fins or concrete surfaces, finished even and fair complete all as specified and as directed. 246 Material and labour for plastering 12mm thick with ready mix cement plaster material on internal surface of Brick walls or concrete surfaces, finished even and fair complete all as specified and as directed. 247 Material and labour for plastering 5mm thick with ready mix cement plaster material on concrete surfaces of ceiling, finished fair and evencomplete all as specified and as directed. 248 Material and labour for plastering 10mm thick with ready mix cement plaster material on concrete surfaces of ceiling, finished fair and evencomplete all as specified and as directed. 249 Dismantling of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, in any description, stacking serviceable brick for re use if directed and balance removing rubbish from the site complete all as specified and as directed. 250 Material and labour for brick work with sub class ‘B’ old size burnt clay bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed. 251 Material and labour for brick work with sub class ‘B’ old size burnt clay bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:4) complete all as specified and as directed. 252 Material and labour for brick work with Fly Ash bricks (old size ), straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge. 253 Material and labour for brick workin half brick thick wall with sub class B burnt clay bricks (old size ), straight or curved on plan to any ra`dius built in cement mortar (1:4) complete all as specified and as directed. 254 Material and labour for brick work using old serviceable bricks obtained from dismantled item shall be reused after cleaning old cement mortar, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed. 255 Demolition of cement concrete reinforced of any description such as roof slab, slab, beam, staircase, landing chajja, kitchen chimney, OHT staging, fins, shelves, etc, including reinforcement cut as required to facilitate demolition and prepare the surface to casting/jointing newincluding removing rubbish material from building and thrown in low lying empty area at any distance upto 5Km from the site as directed complete all as specified and as directed. 256 Material and labour for reinforced cement concrete M-20 (Nominal mix) using 20mm graded stone aggregate as in slabs/cooking platform supported on walls, beams and columns landing, balconies, canopies, deck slabs and in cup board shelves and the like complete all as specified and as directed.(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of BOQ. 257 Material and labour for reinforced cement concrete M-25 (Nominal mix) using 20mm graded stone aggregate as in slabs supported on walls, beams and columns landing, balconies, canopies, deck slabs and in cup board shelves and the like complete all as specified and as directed.(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of BOQ. 258 Material and labour for reinforced cement concrete M-25 (Nominal mix) using 20mm graded stone aggregate as in chajjas, fascias, fins and like complete all as specified and as directed by Engineer-in-Charge.(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of BOQ. 259 Material & Labour for Precast RCC (1:2:4) type B1 using 20 mm graded stone aggregate as in manhole cover, set in CM (1:4) including necessary form work complete all as specified and as directed (Reinforcement and MS handle shall be measured and paid separately under appropriate item of this Sch). 260 Material and labour for reinforced cement concrete M-25 (Design Mix) using 20mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases of columns, basement slab etc. complete all as specified and as directed. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule. 261 Material and labour for reinforced cement concrete M-25 (Design Mix) using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and as directed.(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule. 262 Material and labour for reinforced cement concrete M-25 (Design mix) using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels any span and the like complete all as specified and as directed.(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of BOQ. 263 Material and labour for reinforced cement concrete M-30 (Design Mix) using 20mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases of columns, basement slab etc. complete all as specified and as directed. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule. 264 Material and labour for reinforced cement concrete M-30 (Design Mix) using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and as directed.(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule. 265 Material and labour for reinforced cement concrete M-30 (Design Mix) using 20mm graded stone aggregate as in walls, retaining walls, basement wall, ballast walls and the like, any thickness above top of footing including attached pilasters and buttresses complete all as specified and as directed.(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.appropriate item of this schedule. 266 Material and labour for reinforced cement concrete M-30 (Design mix) using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels any span and the like complete all as specified and as directed.(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of BOQ. 267 Material and labour for reinforced cement concrete M-30 (Design mix) using 20mm graded stone aggregate as in slabs supported on walls, beams and columns landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of BOQ. 268 Material and labour for mild steel corrosion resistant (CRS) TMT bars, grade Fe 500D/550D, 10mm dia & over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.(NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.) 269 Material and labour for mild steel corrosion resistant (CRS) TMT bars, grade Fe 500D/550D,5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required including bending, cranking etc and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.(NOTE : Weight of binding wire shall not be considered for measurement and payment purpose) 270 Material and labour for mild steel TMT bars,grade Fe 500D/550D, 10mm dia & over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.(NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.) 271 Material and labour for mild steel TMT bars, grade Fe 500D/550D, 6 to 8 mmdiacut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.(NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.) 272 Material and labour for mild steel TMT bars, grade Fe 500D/550D, 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required including bending, cranking etc and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.(NOTE : Weight of binding wire shall not be considered for measurement and payment purpose) 273 Form work tosides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits of foundation and plinth beams and similar work vertical or to betterrough finished flat complete all as specified and as directed. 274 Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter rough finished complete all as specified and as directed. 275 Form work toflat sides and soffits offloor or roof beams, beam haunchings , lintels, cantilevers, shelves including supports, overhangs, sides of chajjas, fascias, fins etc and similar worksrough finished flat surfaces complete all as specified and as directed. 276 Form work tosidesof pillars , posts, struts piers, columns and stanchions and similar worksrough finished complete all as specified and as directed. 277 Form work to soffits of suspended slabs such as flat roof slabs, floor slabs, shelf slab, landings and similar work not exceeding 200mm thick (horizontal or sloping) rough finished complete all as specified and as directed. 278 Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings and removing from site complete all as specified and asdirected by Engineer-in- charge. 279 Dismantling of Plain or corrugated translucent sheeting, any gauge, thickness, as in roof coverings and removing from site complete all as specified and asdirected by Engineer-in- charge. 280 Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings and removing from site complete all as specified and asdirected 281 Dismantling iron or mild steel work of any description like framed truss, framed work in shed and similar work etc complete all as specified and as directed. 282 Dismantling of boarding any description (wooden/PVC/gypsum board etc), fixed in any position, wall, ceiling boards, cup board, cabinet, false ceiling etc (particle, fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed. 283 Dismantling of unframed timber scantlings 40 sq. cm and over in section, in any position and removing from site complete all as specified and asdirected 284 Dismantling of Gl frame work (snap grid framed work) any type and removing from site complete all as specified and asdirected 285 Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and as directed. 286 Material and labour for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in- charge 287 Supply and fixing 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and as directed. 288 S&F Gl frame work (snap grid framed work) for ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having knurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete including hangers 6 mm dia. GI wire (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long at any height and position complete all as specified and as directed. 289 S&F 6-7mm thick PVC board both side PVC profile sheet, suitable for roof ceiling snap grid framed work, shape, colour and design as approved by GE complete all as specified and as directed. 290 S&F 12mm thick gypsum board, suitable for roof ceiling snap grid framed work,fixed or laid/ inserted to GI framework with screws complete all as specified and as directed. 291 S&F 6mm thick non asbestos fibre cement designer building boards, suitable for roof ceiling snap grid framed work, fixed or laid/ inserted to GI framework with screws complete all as specified and as directed. 292 Material and labour for 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over board ceiling or metal frame work and reinforced with and including GI wire mesh, PVC wire meash and fillets complete all as specified and as directed by Engineer-in-charge. 293 Supply & fixing Solid PVC Wall Lining/Paneling consisting of 8-10mm thick wood grain printed PVC sheet including PVC sheet fillet of width 35mm and PVC frame for wall paneling as per manufacturer’s specification, fixing on to wall including solvent cement complete all as specified and as directed. 294 Supply & fixing Hollow PVC Wall Lining/Paneling consisting of 5mm thick Plain colour PVC sheet including PVC sheet fillet of width 35mm and PVC frame for wall paneling as per manufacturer’s specification, fixing on to wall including solvent cement complete all as specified and as directed. 295 Supply and fixing of 4mm thick aluminium composite panel (ACP, Grade-1) of approved colour, fire / UV / Fuel / smoke and heat-resistance type, exterior grade, confirming to IS 17682 : 2021, for wall/column/canopy cladding or ceiling at any height or any other position, in combination of solid metallic colour including all necessary frame work and complete weather sealing, the composite panel should consist of thermoplastic core of LDPE sandwich between 2 skins of Minimum 0.5 mm Base Metal Thickness (BMT) for top and bottom aluminum sheets (making a total panel thickness 4mm), alloy designations 19002 or 31500B or 51000A conforming to IS 737. The surface will be furnished with Lumiflon based fluorocarbon coating (FEVE resin-based) of approved colour on top side and service coating (polymer-based) on the reverse side. The coatings shall high-performance exterior specification for superior resistance to moisture, weathering, ozone, and UV radiation and conform to the specifications of ECCA (European Coil Coating Association) / AAMA (American Architectural Manufacturers Association) standards, likely AAMA 2605, the system shall be with and including GI brackets and stainless steel bolts and nuts, spring washer and cap nuts including all other accessories required to fixing the panel. The support system (brackets and framework) will be designed as per manufacturer specifications to withstand significant wind pressure (150 kg/Sqm), ensuring structural integrity complete all as specified and as directed. 296 Material and labour for mild steel tubular poles/post, framed work, framed/truss work etcmade by using hollow square/rectangular/round pipe, Grade St-240, ERW or induction butt welded tubes conforming to conforming to the latest relevant Indian Standards (IS), such as IS 1239 (Part 1) or IS 4923 for structural use, including fabrication, assembly, installation, and finishing,including special shaped washers, bending and welding etc, complete all as specified and as directed. 297 Material and labour for mild steel work using FI as wind ties for roof including securing bolts conforming to Fe-290 Gde-E-165 complete all as specified and as directed. 298 Material and labour for mild steel Framed work such as grills, guard bars, ladder, cooler stand, as door frame, railing, cloth drying provision, gratings, framed work for roof sheeting, structural steel work, frame work of water tanks and similar work etc. with ends of bars shouldered and/or riveted, or forged into spikes, made by using rolled mild steel Joist, channel, angle, or tee sections, fixed independently distance pieces, cleats or other connecting plates, gusset plates, brackets, bending and welding, riveting etc, and cut to shape, drilled and counter sunk for screw, conforming to Fe-290 (Gde-E-165) complete all as specified and as directed. 299 Material and labourfor Mild steel, 1.60mm thick plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as requiredcomplete all as specified and as directed. 300 Material and labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete including fixing the railing with necessary accessories and stainless dash fastener, stainless bolts etc of required size, on the top of floor or the side of waist slab with suitable arrangements complete all as specified and as as directed.Note : Weight of stainless steel (Grade 304) shall be physically ascertained through a board of officers convened by CWE and payment shall be made only after ascertaining the actual weight of stainless steel (Grade 304) at site. 301 Material and labour for welding works in reapirs for repair to existing steel members of existing door frame/mild steel window frame or any other situation by welding at site in any position, welding in repairs not exceeding 2.5cm in length and not exceeding 6mm thickness of metal to be welded complete all as specified and as directed. 302 Material and labour for welding works in reapirs for repair to existing steel members of existing door frame/mild steel window frame or any other situation by welding at site in any position, Running welding in repairs not exceeding 6mm thickness of metal to be welded complete all as specified and as directed. 303 Material and labour for provision of swan neck (Y type horn) made out of MS angle (size 50 mm X 50 mm X 6 mm or as directed), drilled and countersunk and having provision to fix galvanized barbed wire and concertina coil and screwing etc. posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.and similar work conforming to Fe-290 Gde E-165 including embeding in concrete during casting RCC pillar/Beam complete all as specified and as directed. 304 Supply and fixing galvanized steel barbed wire with two strands of line wire of dia 2.24 mm and barbed with point wire of dia 2 mm at 75 mm spacing straining and fixing to swan neck including securing or tying at crossings with and provision of galvanised iron binding wire, GI staples or steel pins, etc. complete all as specified and as directed. 305 Supply only punched tape concertina coil made out of cold drawn unalloyed steel wires of dia 2.6 mm having minimum tensile strength of 1670 N per sqmm as per IS 4454 (Part- 1): 2001 with hot dip galvanized as per practice recommended in IS: 2629 and the coatings shall conform to heavily coated hard variety as per table I of IS: 4826 (weight of Zinc coating 230 gram per sqm minimum) and steel strip of size 19 mm X 0.5 mm with hardness of 137 to 187 VPN and zinc coating of 18 to 20 microns, minimum 610 mm dia of coil when closed, (9 kg ± 5 %) weight of coil with 50 turns & 129 Nos clips (without handles and spikes) and minimum 580 mm dia when opened upto 6 metres, stretched to 6 metres for 50 turns during installations complete all as specified and as directed. 306 Fixing only concertina coil with punched tape, concertina coil shall be fixed over wall (for eg. 600mm dia having 50 rounds per 6 meter length) complete all as specified and as directed. Note ;- For the purpose of measurement the length of wall shall be measured and paid. 307 Supply & fixing 110mm bore uPVC pipesgrade Bsingle socketedin any length, fixed in floor/trench along security wall, complete all as specified and as directed. 308 Forming square grooves in plaster n exc 12mm deep and n exc 15mm on face complete all as specified and as directed. 309 Dismantling posts or struts of any section and type including taking out embeddedportion in concrete/ brickwork, etc, and making good to disturbed natural ground and removing from site complete all as specified and as directed by Engineer-in-charge. 310 Material and labour for Mild steel workangle ironfencing posts &flat iron including embedding in concrete and screwing etc., post and struts in fencing including cutting tops, bending to shape, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc.) Including all necessary drilling, bolting or riveting etc.ofFe-290 Gde E -165 complete all as specified and as directed. 311 Material and labour for preparation ofnew steel and iron surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (1st quality) of approved tint/colour over a coat of red oxide primer with using paint brush complete all as specified and as directed. 312 Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth by cleaning the dust and removing all loose particle with using sanded paper, clean cloths and dry paint brush & applying one coat of synthetic enamel paint (1st quality) of approved tint/colour to achieve glossing finish with using paint brush complete all as specified and as directed. 313 Material and labour for preparation of old painted steel surfaces of any description, not exceeding 10cm in width or girth by cleaning the dust and removing all loose particle with using sanded paper, clean cloths and dry paint brush and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. 314 Material and labour for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth by cleaning the dust and removing all loose particle with using clean cloths and dry paint brush & applying one coat of synthetic enamel paint (1st quality) of approved tint/colour to achieve glossy finish with using paint brush complete as specified and as directed by Engineer-in-Charge. 315 Material and labour for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth by cleaning the dust and removing all loose particle with using clean cloths and dry paint brush & applying two coats of french polish complete all as specified and as directed. 316 Material and labour for complete removal of existing treatment of any type/description (any layer) from external/internal wall/ceiling surfaces, soffits/chajja/roof projection surfaces etc., by scraping steel patti or Mechanical sander/grinder machine having suction vaccum Bag (Smart periodical methodology), complete all as specified and as directed. 317 Material and labour for preparation of new plastered surfaces, surface after complete removal, applying acrylic putty on internal surfaces of walls/ceiling/soffits etc (thickness vary from 1.5 to 2 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using readymade putty, including sanding with wall sander after filling the putty in first coat/second coat to make surface smooth and ready for receiving interior/exterior painting complete all as specified and as directed.Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.Make of acrylic Putty: - Berger / JK / Birla / Asian / Nerolac 318 Material and labour for applying 02 coats of interior acrylic emulsion paint of approved tint/shade (Company Depot Tinted) @ 12 sq.m/litre/2 coats to wall surfaces (new or old prepared internal surface after complete removal and applying putty) over and including a coat of interior primer @ 11 sq.m/litre/1 coat (primer shall be same make as acrylic emulsion paint), paint and primer applying by using paint roller brush complete all as specified and as directed.Note ;- Complete removal and putty shall be measured and paid separately under respective item of BOQ.Brand and Make of interior acrylic emulsion paint: - Easy Clean Matt of Berger / Apcolite Advanced of Asian / Impression Ultra Fresh of NerolacBrand and Make of interior primer: - Seal O Primer of Berger / Smart Care Primero of Asian / Excel Alkali Prime of Nerolac 319 Material and labour for applying 02 coats of exterior acrylic emulsion paint of approved tint/shade (CompanyDepot Tinted) @ 6 sq.m/litre/2 coats to external walls / Soffits of Chajjas / Roof Projections / Cantilevers / Balcony etc. (new or old prepared external surface after complete removal) over and including a coat of exterior primer @ 11 sq.m/litre/1 coat (primer shall be same make as acrylic emulsion paint), paint and primer applying by using airless spray gun complete all as specified and as directed.Note ;- Complete removal shall be measured and paid separately under respective item of BOQ.Brand and Make of exterior acrylic emulsion paint: - Weather Anti Dust of Berger / Apex Ultima of Asian / Excel Mica Marble of Nerolac Brand and Make of interior primer: - Seal O Primer of Berger / Smart Care Primero of Asian / Excel Alkali Prime of Nerolac 320 Material and labour for applying 02 coats of interior acrylic emulsion paint of white shade (Company Depot Tinted) @ 7.50 sq.m/litre/2 coats to ceiling surfaces (new or old prepared internal surface after complete removal and applying putty) over and including a coat of interior primer @ 10.50 sq.m/litre/1 coat (primer shall be same make asacrylic emulsion paint), paint and primer applying by using paint roller brush complete all as specified and as directed.Note ;- Complete removal and putty shall be measured and paid separately under respective item of BOQ.Brand and Make of interior acrylic emulsion paint: - Bison Acrylic Emulsion of Berger / Tractor Emulsion of Asian / Beaty Smooth of Nerolac Brand and Make of interior primer: - Seal O Primer of Berger / Smart Care Primero of Asian / Excel Alkali Prime of Nerolac 321 Material and labour for Preparation of existing internal verticle treated surfaces by remove / scraping down allloose treatment etc with using broom / paint brush / sand papering or by any other mean including sanding with wall sander (as per requirement) to make surface smooth including applyingputty where required for filling to nail holes/light hair cracks etc., after preparing the surface applying 01 coat of interior acrylic emulsion paint of approved tint/shade as per existing (Company Depot Tinted) @ 20 sq.m/litre/per coat to wall surfaces over and including a coat of interior primer @ 13 sq.m/litre/1 coat (primer shall be same make as acrylic emulsion paint), paint and primer applying by using paint roller brush complete all as specified and as directed.Brand and Make of interior acrylic emulsion paint: - Easy Clean Matt of Berger / Apcolite Advanced of Asian / Impression Ultra Fresh of NerolacBrand and Make of interior primer: - Seal O Primer of Berger / Smart Care Primero of Asian / Excel Alkali Prime of Nerolac 322 Material and labour for Preparation of existing treated surfaces by remove / scraping down allloose treatment etc with using broom / paint brush / sand papering or by any other mean including applyingwall putty where required for filling to nail holes/light hair cracks etc., after preparing the surface applying 01 coat of exterior acrylic emulsion paint of approved tint/shade as per existing (Company Depot Tinted) @ 11.50 sq.m/litre/per coat to external walls / Soffits of Chajjas / Roof Projections / Cantilevers / Balcony etc. over and including a coat of exterior primer @ 15 sq.m/litre/1 coat (primer shall be same make as acrylic emulsion paint), paint and primer applying by using airless spray gun complete all as specified and as directed.Brand and Make of exterior acrylic emulsion paint: - Weather Coat Glow of Berger / Apex Weatherproof of Asian / Weather Shield Protect of Nerolac Brand and Make of interior primer: - Seal O Primer of Berger / Smart Care Primero of Asian / Excel Alkali Prime of Nerolac 323 Material and labour for Preparation of existing internal ceiling treated surfaces by remove / scraping down allloose treatment etc with using broom / paint brush / sand papering or by any other mean including sanding with wall sander (as per requirement) to make surface smooth including applyingputty where required for filling to nail holes/light hair cracks etc., after preparing the surface applying 01 coat of interior acrylic emulsion paint of approved tint/shade as per existing (Company Depot Tinted) @ 18 sq.m/litre/per coat to ceiling surfaces over and including a coat of interior primer @ 13 sq.m/litre/1 coat (primer shall be same make as acrylic emulsion paint), paint and primer applying by using paint roller brush complete all as specified and as directed.Brand and Make of interior acrylic emulsion paint: - Bison Acrylic Emulsion of Berger / Tractor Emulsion of Asian / Beaty Smooth of Nerolac Brand and Make of interior primer: - Seal O Primer of Berger / Smart Care Primero of Asian / Excel Alkali Prime of Nerolac 324 Material and Labour for preparing new plastered or prepared old surface after complete removal of walls surfaces and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use, white wash applying by using paint brush complete all as specified and as directed.Note ;- Complete removal where required shall be measured and paid separately under respective item of BOQ. 325 Material and Labour for Preparation the existing treated surfaces of walls including cornices by remove / scraping down allloose treatment etc with using broom /steel patti / wire brush / sand papering or by any other mean including applyingwall putty where required for filling to depressions/nail holes/light hair cracks etc and after preparing the surface applying two coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use, white wash applying by using paint brush complete all as specified and as directed. 326 Material and labour for Preparation of new plastered or prepared old surface after complete removal of ceiling surfaces and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use, white wash applying by using paint brush complete all as specified and as directed.Note ;- Complete removal where required shall be measured and paid separately under respective item of BOQ. 327 Material and Labour for Preparation the existing treated surfaces of ceiling by remove / scraping down allloose treatment etc with using broom /steel patti / wire brush / sand papering or by any other mean including applyingwall putty where required for filling to depressions/nail holes/light hair cracks etc and after preparing the surface applying two coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use, white wash applying by using paint brush complete all as specified and as directed. 328 Material and Labour for Preparation the existing treated surfaces of ceiling by remove / scraping down allloose treatment etc with using broom /steel patti / wire brush / sand papering or by any other mean including applyingwall putty where required for filling to nail holes/light hair cracks etc and to make surface even and smooth, and after preparing the surface smooth applying one coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed. 329 Material and labour for preparation of new concrete surface / kerb stone surfaces of any description not otherwise described over 10cm width or girth, by cleaning the dust and removing all loose particle with using clean cloths, brooms and dry paint brush etc and after preparing the surfaces applying two coats of water based road marking paint(1st quality) of approved tint/colour (one colour or alternative colour as directed) complete all as specified and as directed. 330 Material and labour for preparation of new plastered surfaces of walls/pillars /cornices by brooming down with using broom/sand papering or by any other mean, washing down with water and applying twocoats of cement base paint as per approved tint/colour with using paint brush complete all as specified and as directed. 331 Material and labour for providing chattris made out of Dholpur stone including its base of size 0.45mX0.45mX25mm, 04 Nos pillar (2.5 inch X 2.5 inch), 04 Nos mehrab fixed between pillars, 04 Nos Todies, 04 Nos Barsot support, 01 Barsot on top, 01 chajja 1 inch thick, Gumraj with Kalash on top (height from base to kalash top should be 1.2m), all work as per shape, design, carving and proportions as per approved by GE. The fixing shall be done in white cement and pigment matching with shade of stone complete all as specified and as directed. 332 Material and labour for 25mm thick Dholpur stone edging gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 Sqm and not exceeding 0.50 Sqm fixed with cement mortar and required fixing chemical including polishing, rubbing & including silicon treatment, stone fixing as roof top portion, lawn area and where directed complete all as specified and as directed. 333 Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed 334 Surface dressing not exceeding 15cm deep in soft/ loose soilincluding cutting of grass, roots, bushes if any and removing from site all grass, roots and extra soil if any complete all as specified and as directed. 335 Excavation in trenches (Manual), not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations of shafts, wells, cess pits, manholes, pipe line, cable trenches etc., not exceeding 10 Sqm on plan and getting out in any type of soft including trimming the sides and forming bottom surfaces to required levels complete all as specified and as directed. 336 Excavation in trenches (Manual), not exceeding 1.5m wide and exceeding 1.5m but not exceeding 3m in depth for foundations of shafts, wells, cess pits, manholes, pipe line, cable trenches etc., not exceeding 10 Sqm on plan and getting out in any type of soft including trimming the sides and forming bottom surfaces to required levels complete all as specified and as directed. 337 Excavation in trenches (Manual), not exceeding 1.5m wide and exceeding 3m but not exceeding 4.5m in depth for foundations of shafts, wells, cess pits, manholes, pipe line, cable trenches etc., not exceeding 10 Sqm on plan and getting out in any type of soft including trimming the sides and forming bottom surfaces to required levels complete all as specified and as directed. 338 Excavation in trenches (Manual), not exceeding 1.5m wide and exceeding 4.5m but not exceeding 6m in depth for foundations of shafts, wells, cess pits, manholes, pipe line, cable trenches etc., not exceeding 10 Sqm on plan and getting out in any type of soft including trimming the sides and forming bottom surfaces to required levels complete all as specified and as directed. 339 Excavation over area (Manual), not exceeding 1.5 metre deep and getting out in any type of soil complete all as specified and as directed. 340 Excavation over area (Manual), exceeding 1.5 metre but not exceeding 3 metre deep and getting out in any type of soil complete all as specified and as directed. 341 Excavation in post holes in soft/loose soil n. exc 0.50 cum each, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25 cm including removing of surplus spoil to a distance n exc 50 mtr and making good the disturbed surfaces complete all as specified and as directed. 342 Earth work in excavation by mechanical means (Hydraulic excavator means) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out in all kind of soil and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and as directed . 343 Earth work in excavation by mechanical means (Hydraulic excavator means) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out in all kind of soil and disposal of excavated earth lead upto 50 m and lift above 1.5m and up to 3.0 m (in depth beyond the first 1.5 m), complete all as specified and as directed. 344 Earth work in excavation by mechanical means (Hydraulic excavator means) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out in all kind of soil and disposal of excavated earth lead upto 50 m and lift above 3m and up to 4.5 m (in depth beyond the first 3 m), complete all as specified and as directed. 345 Earth work in excavation by mechanical means (Hydraulic excavator means) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out in all kind of soil and disposal of excavated earth lead upto 50 m and lift above 4.5m and up to 6.0 m (in depth beyond the first 4.5m), complete all as specified and as directed. 346 Earth work in excavation by mechanical means (Hydraulic excavator means) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out in all kind of soil and disposal of excavated earth lead upto 50 m and lift above 6.0m and up to 7.5 m (in depth beyond the first 6.0m), complete all as specified and as directed. 347 Labour for earth filling, spreading and levelling in layers n exc. 25 cm thick (each layer) consolidating the surface with Durmat/hand roller, rolling to required gradient and camber and upto entire satisfaction of Engineer-in-charge including levelling, well ramming including watering as required and consolidation complete all as specified and as directed. 348 Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed. 349 Removing excavated material (surplus soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed. 350 Removing excavated material (surplus soil) to a distance exceeding 1.5KM but not exceeding 5.0KM and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed. 351 Material and Labour for Use and waste of timbering as planking and strutting for excavations over areas (as basements etc.) and including use and waste of raking shores not exceeding 1.5m deep from starting point and fixing and removal complete all as specified and as directed. 352 Material and Labour for Use and waste of timbering as planking and strutting for excavations over areas (as basements etc.) and including use and waste of raking shores above 1.5m and upto 3.0m deep (in deep beyond the first 1.5m), and fixing and removal complete all as specified and as directed. 353 Material and Labour for Use and waste of timbering as planking and strutting for excavations over areas (as basements etc.) and including use and waste of raking shores above 3.0m and upto 5.0m deep (in deep beyond the first 3.0m), and fixing and removal complete all as specified and as directed. 354 Material and Labour for Use and waste of timbering as planking and strutting for excavations over areas (as basements etc.) and including use and waste of raking shores above 5.0m and upto 8.0m deep (in deep beyond the first 5.0m), and fixing and removal complete all as specified and as directed. 355 Dismantling water pipe line, taking up CI pipe 250mm nominal size, with spigot and socket ends and lead joints including burning out joints and recovering lead, including all fittings fromtrenches including balling out dirt/muddy water if necessary complete all as specified and as directed.Note : (i) Excavation and Earth work shall be measured and paid separately under respectiveitem of BOQ 356 Dismantling water pipe line, taking up CI pipe 200mm nominal size, with spigot and socket ends and lead joints including burning out joints and recovering lead, including all fittings fromtrenches including balling out dirt/muddy water if necessary complete all as specified and as directed.Note : (i) Excavation and Earth work shall be measured and paid separately under respectiveitem of BOQ 357 Dismantling water pipe line, taking up CI pipe 150mm nominal size, with spigot and socket ends and lead joints including burning out joints and recovering lead, including all fittings fromtrenches including balling out dirt/muddy water if necessary complete all as specified and as directed.Note : (i) Excavation and Earth work shall be measured and paid separately under respectiveitem of BOQ 358 Dismantling water pipe line, taking up PVC pipe of size 125mm bore including all fittings fromtrenches including balling out dirt/muddy water if necessary complete all as specified and as directed.Note : (i) Excavation and Earth work shall be measured and paid separately under respectiveitem of BOQ 359 Dismantling water pipe line, taking up GI pipe of size 40/50mm bore including all fittings fromtrenches including balling out dirt/muddy water if necessary complete all as specified and as directed.Note : (i) Excavation and Earth work shall be measured and paid separately under respectiveitem of BOQ 360 Dismantling water pipe line, taking up GI pipe of size 25mm bore including all fittings fromtrenches including balling out dirt/muddy water if necessary complete all as specified and as directed.Note : (i) Excavation and Earth work shall be measured and paid separately under respectiveitem of BOQ 361 Dismantling water pipe line, taking up GI pipe of size 20mm bore including all fittings fromtrenches including balling out dirt/muddy water if necessary complete all as specified and as directed.Note : (i) Excavation and Earth work shall be measured and paid separately under respectiveitem of BOQ 362 Supplying, laying, connecting, jointing and testing in trenches 250 mm nominal dia ductile iron pressure pipe for water mains, centrifugally cast, spigot and socket ends (for push on joints), class K9 in any length with external protection of Metallic zinc with finishing layer of bituminous paint and internal linings of Portland cement (with or without additives) mortar with seal coat, all as per IS 8329: 2000 and including materials and jointing with rubber gasket ring for WA type of application and hardness class 50 for bulb and hardness class 80 for heel all as per IS 5382: 2018 and IS 12820: 2004 complete all as specified and as directed.Note : (i) DI specials/ fittings shall be measured and paid separately under respective items of BOQ. (ii) Test Certificate for pipes from manufacturer shall be produced by contractor.(iii) Excavation and earthwork shall not be measured separately if pipeline laying is carried out at the same location where the old pipe is being removed. However, if the pipeline is laid at a new location, the excavation and earthwork shall be measured and paid for separately under the respective item of the BOQ. 363 Supplying, laying, connecting, jointing and testing in trenches 200 mm nominal dia ductile iron pressure pipe for water mains, centrifugally cast, spigot and socket ends (for push on joints), class K9 in any length with external protection of Metallic zinc with finishing layer of bituminous paint and internal linings of Portland cement (with or without additives) mortar with seal coat, all as per IS 8329: 2000 and including materials and jointing with rubber gasket ring for WA type of application and hardness class 50 for bulb and hardness class 80 for heel all as per IS 5382: 2018 and IS 12820: 2004 complete all as specified and as directed.Note : (i) DI specials/ fittings shall be measured and paid separately under respective items of BOQ. (ii) Test Certificate for pipes from manufacturer shall be produced by contractor.(iii) Excavation and earthwork shall not be measured separately if pipeline laying is carried out at the same location where the old pipe is being removed. However, if the pipeline is laid at a new location, the excavation and earthwork shall be measured and paid for separately under the respective item of the BOQ. 364 Supplying, laying, connecting, jointing and testing in trenches 150 mm nominal dia ductile iron pressure pipe for water mains, centrifugally cast, spigot and socket ends (for push on joints), class K9 in any length with external protection of Metallic zinc with finishing layer of bituminous paint and internal linings of Portland cement (with or without additives) mortar with seal coat, all as per IS 8329: 2000 and including materials and jointing with rubber gasket ring for WA type of application and hardness class 50 for bulb and hardness class 80 for heel all as per IS 5382: 2018 and IS 12820: 2004 complete all as specified and as directed.Note : (i) DI specials/ fittings shall be measured and paid separately under respective items of BOQ. (ii) Test Certificate for pipes from manufacturer shall be produced by contractor.(iii) Excavation and earthwork shall not be measured separately if pipeline laying is carried out at the same location where the old pipe is being removed. However, if the pipeline is laid at a new location, the excavation and earthwork shall be measured and paid for separately under the respective item of the BOQ. 365 Supply, laying, jointing and testing of steel water tubing 25 mm bore ISI marked medium grade galvanised including tube fittings Viz Tees, Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road complete all as specified and as directed.Note:- Excavation and earthwork shall not be measured separately if pipeline laying is carried out at the same location where the old pipe is being removed. However, if the pipeline is laid at a new location, the excavation and earthwork shall be measured and paid for separately under the respective item of the BOQ. 366 Supply, laying, jointing and testing of steel water tubing 20 mm bore ISI marked medium grade galvanised including tube fittings Viz Tees, Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road complete all as specified and as directed.Note:- Excavation and earthwork shall not be measured separately if pipeline laying is carried out at the same location where the old pipe is being removed. However, if the pipeline is laid at a new location, the excavation and earthwork shall be measured and paid for separately under the respective item of the BOQ. 367 Supplying, Laying, jointing and testing of high density polyethylene pipe (HDPE) of pressure rating PN 8(0.8 Mpa), material grade PE 100 and nominal outside dia 125 mm as per IS 4984: 2016 including all fittings and fixtures as per IS 8360 : 2022 or IS 8008 : 2022 including HDPE caps required at certain intervals for swimming pool exposure pipe complete all as specified and as directed 368 Supply and fixing in replacement non-rising stem type sluice valves having double flanged for connections of nominal pressure (PN 1.6) as per IS 14846: 2000 of preferred materials, nominal size 250 mm including nuts, bolts, packing sheets etc. complete all as specified and as directed. 369 Supply and fixing in replacement non-rising stem type sluice valves having double flanged for connections of nominal pressure (PN 1.6) as per IS 14846: 2000 of preferred materials, nominal size 200 mm including nuts, bolts, packing sheets etc. complete all as specified and as directed. 370 Supply and fixing in replacement non-rising stem type sluice valves having double flanged for connections of nominal pressure (PN 1.6) as per IS 14846: 2000 of preferred materials, nominal size 150 mm including nuts, bolts, packing sheets etc. complete all as specified and as directed. 371 Supply and fixing in replacement non-rising stem type sluice valves having double flanged for connections of nominal pressure (PN 1.6) as per IS 14846: 2000 of preferred materials, nominal size 80 mm including nuts, bolts, packing sheets etc. complete all as specified and as directed. 372 Supply and fixing in replacement Gun-metal, globe or gate valve nominal size 50 mm, screwed both ends for iron pipe or for unions, as per IS 778-1984, specifies the material grade as per IS 318 LTB2 complete all as specified and as directed. 373 Supply and fixing in replacement Gun-metal, globe or gate valve nominal size 25 mm, screwed both ends for iron pipe or for unions, as per IS 778-1984, specifies the material grade as per IS 318 LTB2 complete all as specified and as directed. 374 Supply and fixing in replacement Gun-metal, globe or gate valve nominal size 20 mm, screwed both ends for iron pipe or for unions, as per IS 778-1984, specifies the material grade as per IS 318 LTB2 complete all as specified and as directed. 375 Supplying, laying, connecting, jointing and testing in trenches ductile iron fittings (special castings) (class K12 as per IS 9523: 2000) for ductile iron pressure pipe for water mains upto 300 mm nominal dia (spigot and socket and flange ends (for push on joints and flanged joints) with external coatings of Metallic zinc with finishing layer of bituminous paint and internal linings of Portland cement (with or without additives) mortar with seal coat, all as per IS 9523: 2000 and including materials and jointing with rubber gasket for WA type of application and hardness class 50 for bulb and hardness class 80 for heel all as per IS 5382: 2018 and IS 12820: 2004 for push on joints and rubber gasket as per IS 638: 1979 for flanged joints complete all as specified and as directed. 376 M & L for construction of new valve pit/chamber of size 1200 mm (Length) X 1200 mm (Breadth) X 1200 mm (depth) (internal dimension), PCC foundation M7.5(Nominal Mix) using 40 mm nominal size graded crushed stone aggregate as in base concrete, brick work with sub class B bricks, non-modular sizes as per IS 1077: 1992, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6, cement plaster 20 mm thick internally in two coats of (15 mm and 5 mm) in cement mortar 1:4, 3 mm thick mild steel sheet of any grade and designation as per IS 513: 2008 and IS 10748: 2004 welded with angle iron (40 mm X 40 mm X 6 mm) frame of structural steel, frame welded with angle iron (50 mm X 50 mm X 6 mm) frame of structural steel, welded to flat iron of size 150 mm X 50 mm X 6 mm of structural steel, fixed with bolt of 16 mm dia anchored with plate of size 100 mm X 100 mm X 3 mm of structural steel, bolt and anchored plate embedded in 250 mm thick PCC coping in M15(Nominal Mix) using 20 mm nominal size graded crushed stone aggregate, mild steel handle, grade E165 as per IS 15911: 2010 for structural steel with necessary, welding, riveting, bolting including painting exposed steel surfaces with two coats of bituminous paint and embedded surfaces of steel with two coats of tar, finishing exposed faces of concrete surfaces and plaster surfaces with three coats of white wash and all as per drawing No. BTD-811 Sheet Nos 1/2 and 2/2 of HQ CE Bathinda Zone, including dismantling existing valve pit complete like brick work, steel work, including necessary earthwork if required as adjustment for construction of new valve pit, returning filling, removal all debris from site complete all as specified and as directed. 377 Demolition and breaking up drain pipes SGSW, AC or reinforced concrete pipe up to and including 150 mm bore pipes complete all as specified and directed. 378 Supply and laying DWCPE (SN8) for non-pressure underground drainage and Sewerage drain pipe 100mm nominal dia, Type B, confirming to 16098 (Part 2):2013 (pipe with online coupler and elastomeric rubber ring) with hollow annular profiled outer surface and a smooth inner surface (double wall corrugated) including all accessories/fittings/jointing ring, jointing and testing, pipe laid in trenches directly on compacted earth, complete all as specified and as directed. 379 Supply and laying DWCPE (SN8) for non-pressure underground drainage and Sewerage drain pipe 150mm nominal dia, Type B, confirming to 16098 (Part 2):2013 (pipe with online coupler and elastomeric rubber ring) with hollow annular profiled outer surface and a smooth inner surface (double wall corrugated) including all accessories/fittings/jointing ring, jointing and testing, pipe laid in trenches directly on compacted earth, complete all as specified and as directed. 380 Supply and laying DWCPE (SN8) for non-pressure underground drainage and Sewerage drain pipe 200mm nominal dia, Type B, confirming to 16098 (Part 2):2013 (pipe with online coupler and elastomeric rubber ring) with hollow annular profiled outer surface and a smooth inner surface(double wall corrugated) including all accessories/fittings/jointing ring, jointing and testing, pipe laid in trenches directly on compacted earth, complete all as specified and as directed. 381 Supply, installation and fixing of FRP laminated diving board, overall length 4.8 metres, manufactured with 99.7% water-resistant polyester resin, reinforced with CSM-450 chopped strand glass mat. The board shall have a thickness ranging from 50 mm to 65 mm and a width of 500 mm. The diving board shall be provided with a full-length anti-slip surface incorporating water-repellent properties for enhanced safety. The top surface shall have a highly durable gel coat finish, resistant to UV radiation and adverse weather conditions, while maintaining flexibility. The work shall include supply and installation of stainless steel fulcrum assembly, complete with all necessary fixing arrangements using AISI 304 stainless steel countersunk screws (corrosion-resistant, suitable for outdoor and wet conditions), the entire job shall be executed as per the manufacturer’s design and recommendations, complete all as specified and as directed.Note: Diving board shall be approved by GE. 382 Supply, installing, commissioning and testing of factory made LT panel board (out door type, 415 volts, 3 phase, 4 wire AC supply) cubical type suitable size, outer shell made out of3.15 mm thick CRCA epoxy powder coated sheet and inner shell made out of 2mm thick CRCA epoxy powder coated sheet, factory fabricatedhaving modern fabrication and testing process followed by powder coat painting having thickness not less than 100 microns, totally enclosed busbar chamber fully comparted type to accommodate the incoming and outgoing each switch gear shall have be independent opening and having provision for front and rear side opening with double door with hinges including locking arrangements (chromium plated 19 mm dia fancy lock) including provision of rubber beading and stainless steel cable glands for each cable to make it weather and vermin proof, provision of air fins for ventilation, The Four Pole bus bar shall be insulated with colour code heat shrinkable sleeve and shall be mounted on suitable size F class insulator at an interval not more than 250 mm through out the length of each bus bar, inside depth of panel should be min 750mm, panel shall be mounted on angle iron frame and04 No legs made from angle of size 40 x40 x5mm, legs shall be 750 mm long, 300 mm grouted in blocks of PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) with 450 mm ground clearance, frame and legs duly spray painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer, danger notice plate for LT with conventional skull and bones duly riveted/pasted to the paneldoor, complete including all connections incoming / out going and taking out old any type, complete all as directed and comprising of following accessories :- 383 Four Pole, Aluminium bus bar 400 Amps - 01 Set 384 MCCB 250 Amps, FP, adjustable thermal and magnetic release, 100% Icu, 25 KA, 415 V AC supply- 01 No (incoming) 385 MCCB 100 Amps, FP, adjustable thermal and magnetic release, 100% Icu, 25 KA, 415 V AC supply- 04 No (outgoing) 386 Star delta starter suitable for 25 HP pump set - 04 Nos 387 Single phase preventer-03 Nos 388 Multifunction meter Digital type showing Voltage, Amp, Frequency, KW , KWH inbuilt selector switch with CT coils for three phase- 01 No 389 Indicating lamps set RYB - 01 Set of three 390 Internal power and control wiring with suitable size PVC insulated multistranded copper wire. 391 Note :- (i) All type of spares such as glands, lugs, nuts, bolts etc, necessary excavation and earthwork, PCC work and making good disturbed surfaces shall deemed to be included in the quoted unit rate. (ii) Drawing of chambershall be approved by GE before fabrication. 392 Supply & Fixing of Mild steel angle iron base frame (framed work) for all pumping set including embedding in concrete and screwing etc. including cutting tops to shape as directed bent to shape, drilling holes, notching for wire etc, including all necessary drilling, bolting or riveting, welding etc and similar work conforming to Fe 290 Gde E-165 and including two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer complete all as specified and as directed.Note :- (i) Weight of angle iron base frame shall be physically ascertained through a board of officers convened by GE and payment shall be made only after ascertaining the actual weight of angle iron base frame. The board shall be duly countersigned by GE shall enclosed with Final Bill (iii) Concrete work shall be measured and paid separately under appropriate item of Schedule A BoQ. 393 Supply and fixing in replacement Suction Sweeper assembly made out of MS sheet of size Length 3.50 feet X Breadth 1.00 feet X Height 1.00 feet including plastic bristles (brush) for cleaning of floor of swimming pool and inlet GI medium grade pipe of 40 mm bore approximate 6 inch long for dewatering duly welded and other end threaded on suction sweeper assembly along with plastic wheels and two movable hinges for lifting the assembly during operation including 3HP pump suitable for suctioning of water from bottom of swimming pool complete all as specified and as directed. 394 Supply and fixing 4mm dia galvanised iron wire fitted with nut bolts/hook fastener/angle cleat, for laying mosquito nets complete all as specified & directed by Engineer-in- charge. 395 Taking down carefully existing point wiring any type (light/fan/sockets/bell/power point) complete with all accessories such as switch socket with sheet, ceiling rose, lamp holder including rusted/broken concealed conduit, junction and sunken boxes etccomplete all as specified and as directed. 396 Material and labour for concealed Point wiring for one light point/fan point controlled by one switch (using red, black and green etc colour wires as per colour coding i.e for phase, netural, earth wire etc) complete with 2.5 Sqmm (nominal cross section area)single core FRLSH PVC insulatedunsheathed and multi strand copper conductor cable 1100 volt (ISI marked) including provn of 2.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. drawn through andincludingPVC conduit 20mm dia (medium duty, ISI marked, IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories) with all fittings and all accessories i.e. pipe bend, elbow, junction boxes, pipe hook/clips/clip clamps etc., including Pressed steel powder coated sunken terminal box suitable for modular switch socket (min 50-60mm deep, suitable length and 1.6mm thick sheet) including inner and outer plate, cover plate white colour, any module as per requirements suitable for fixing the modular switch/ socket / regulator etc, including cutting chases in wall (as required and to making proper for fixing new pipe, disturbed cutting during taking down old pipe) and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) complete all as specified and as directed.Note :- (i) Modular switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. (ii) Where ever it is not feasible to cable drawn through existing PVC conduit in roof slab (for ceiling fan point only) due to blocked, casing capping or pipe shall be provided on surface of RCC including fixing arrangement without any extra cost, cost for the same shall deemed to be included in the quoted unit rate. 397 All as per above Srl item No. 384 but for one socket out let 5/6 Amps point controlled by one switch (on same board) complete all as specified and as directed. (switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ). 398 Material and labour for concealed Point wiring for one socket out let 5/6 Amps point controlled by one switch (on independent board with independent circuit using red, black and green etc colour wires as per colour coding i.e for phase, netural, earth wire etc) complete with 2.5 Sqmm (nominal cross section area)single core FRLSH PVC insulatedunsheathed and multi strand copper conductor cable 1100 volt (ISI marked) including provn of 2.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. drawn through andincludingPVC conduit 20mm dia (medium duty, ISI marked, IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories) with all fittings and all accessories i.e. pipe bend, elbow, junction boxes, pipe hook/clips/clip clamps etc., including Pressed steel powder coated sunken terminal box suitable for modular switch socket (min 50-60mm deep, suitable length and 1.6mm thick sheet) including inner and outer plates, cover plate white colour, any module as per requirements suitable for fixing the modular switch/ socket etc, including cutting chases in wall (as required and to making proper for fixing new pipe, disturbed cutting during taking down old pipe) and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) complete all as specified and as directed.Note :- (i) Modular switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. 399 Material and labour for concealed Point wiring for one bell point controlled by one switch (using red, black and green colour wires as colour coding) complete with 1.5 Sqmm (nominal cross section area) single core FRLSH PVC insulatedunsheathed and multi strand copper conductor cable 1100 volt (ISI marked) including provn of 1.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. drawn through andincludingPVC conduit 20mm dia (medium duty, ISI marked, IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc., including Pressed steel powder coated sunken terminal box suitable for modular bell switch (Min 50-60mm deep, suitable length and 1.6mm thick sheet) including inner and outer plates, cover plate white colour, single or double module suitable for fixing the modular bell switch, including cutting chases in wall (as required and to making proper for fixing new pipe, disturbed cutting during taking down old pipe) and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) complete all as specified and as directed. Note :- (i) Bell switch shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. 400 Material and labour for concealed Point wiring for one socket out let 15/16 Amps point controlled by one switch/AC starter switch (on independent board with independent circuit using red, black and green etc colour wires as per colour coding i.e for phase, netural, earth wire etc) complete with 4 Sqmm (nominal cross section area)single core FRLSH PVC insulatedunsheathed and multi strand copper conductor cable 1100 volt (ISI marked) including provn of 4 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. drawn through andincludingPVC conduit 25mm dia (medium duty, ISI marked, IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories) with all fittings and all accessories i.e. pipe bend, elbow, junction boxes, pipe hook/clips/clip clamps etc., including Pressed steel powder coated sunken terminal box suitable for modular switch socket (min 50-60mm deep, suitable length and 1.6mm thick sheet) including inner and outer plates, cover plate white colour, any module as per requirements suitable for fixing the modular switch/ socket etc, including cutting chases in wall (as required and to making proper for fixing new pipe, disturbed cutting during taking down old pipe) and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) complete all as specified and as directed.Note :- (i) Modular switch, socket, AC starter switch shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. 401 Material and labour for concealed Point wiring for one light point controlled by two Nos- two way switch (using red, black and green etc colour wires as per colour coding i.e for phase, netural, earth wire etc) complete with 2.5 Sqmm (nominal cross section area)single core FRLSH PVC insulatedunsheathed and multi strand copper conductor cable 1100 volt (ISI marked) including provn of 2.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. drawn through andincludingPVC conduit 20mm dia (medium duty, ISI marked, IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc., including Pressed steel powder coated sunken terminal boxes suitable for modular switch (Min 50mm deep and 1.6mm thick sheet, suitable size ) including inner and outer plates, cover plate white colour, single module suitable for fixing the modular two way switch, including cutting chases in wall (as required and to making proper for fixing new pipe, disturbed cutting during taking down old pipe) and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) complete all as specified and as directed.Note :- (i) Modular two way switches shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. 402 Taking down carefully existing point wiring any type (light/fan/sockets/bell/power point etc) complete with all accessories such as switch socket with sheet, ceiling rose, lamp holder including rusted/broken surface conduit/casing capping, junction and sunken boxes etc complete all as specified and as directed. 403 Material and labour for surface Point wiring (open surface of metal /brick wall/ceiling /along MS pipe etc) for one light point/fan point controlled by one switch (using red, black and green etc colour wires as per colour coding i.e for phase, netural, earth wire etc) complete with 2.5 Sqmm (nominal cross section area)single core FRLSH PVC insulatedunsheathed and multi strand copper conductor cable 1100 volt (ISI marked) including provn of 2.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. drawn through andincludingPVC conduit 20mm dia (medium duty, ISI marked, IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories) with all fittings and all accessories i.e. pipe bend, elbow, junction boxes, pipe hook/clips/clip clamps etc., including Pressed steel powder coated sunken terminal box suitable for modular switch socket (min 50-60mm deep, suitable length and 1.6mm thick sheet) including inner and outer plates (cover plate white colour, any module as per requirements suitable for fixing the modular switches/ socket / regulator etc, including making good disturbed surfaces of walls/ceiling/floors etc. as per existing complete all as specified and as directed.Note :- (i) Modular switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. (ii) PVC conduit and junction box shall be provided on open surface of metal /brick wall/ceiling /along MS pipe / under false ceiling etc and sunken terminal box concealed in wall or on surface flush fixed, all fixed with clips/clip clamps/PVC clamp /MS clamps /nut bolt /screws as directed or as per site requirement. The rate of these elements shall be deemed to be included in the unit rate quoted nothing shall be paid extra on this account. 404 All as per above Srl item No. 391 but for one socket out let 5/6 Amps point controlled by one switch (on same board) complete all as specified and as directed. (switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ). 405 Material and labour for surface Point wiring (open surface of metal /brick wall/ceiling /along MS pipe etc) for one socket out let 5/6 Amps point controlled by one switch (on independent board with independent circuit using red, black and green etc colour wires as per colour coding i.e for phase, netural, earth wire etc) complete with 2.5 Sqmm (nominal cross section area)single core FRLSH PVC insulatedunsheathed and multi strand copper conductor cable 1100 volt (ISI marked) including provn of 2.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. drawn through andincludingPVC conduit 20mm dia (medium duty, ISI marked, IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories) with all fittings and all accessories i.e. pipe bend, elbow, junction boxes, pipe hook/clips/clip clamps etc., including Pressed steel powder coated sunken terminal box suitable for modular switch socket (min 50-60mm deep, suitable length and 1.6mm thick sheet) including inner and outer plates (cover plate white colour, any module as per requirements suitable for fixing the modular switch/ socket etc, including making good disturbed surfaces of walls/ceiling/floors etc. as per existing complete all as specified and as directed.Note :- (i) Modular switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. (ii) PVC conduit and junction box shall be provided on open surface of metal /brick wall/ceiling /along MS pipe / under false ceiling etc and sunken terminal box concealed in wall or on surface flush fixed, all fixed with clips/clip clamps/PVC clamp /MS clamps /nut bolt /screws as directed or as per site requirement. The rate of these elements shall be deemed to be included in the unit rate quoted nothing shall be paid extra on this account. 406 Material and labour for surface Point wiring (open surface of metal /brick wall/ceiling /along MS pipe etc) for one socket out let 15/16 Amps point controlled by one switch (on independent board with independent circuit using red, black and green etc colour wires as per colour coding i.e for phase, netural, earth wire etc) complete with 4 Sqmm (nominal cross section area)single core FRLSH PVC insulatedunsheathed and multi strand copper conductor cable 1100 volt (ISI marked) including provn of 4Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. drawn through andincludingPVC conduit 20mm dia (medium duty, ISI marked, IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories) with all fittings and all accessories i.e. pipe bend, elbow, junction boxes, pipe hook/clips/clip clamps etc., including Pressed steel powder coated sunken terminal box suitable for modular switch socket (min 50-60mm deep, suitable length and 1.6mm thick sheet) including inner and outer plates (cover plate white colour, any module as per requirements suitable for fixing the modular switch/ socket etc, including making good disturbed surfaces of walls/ceiling/floors etc. as per existing complete all as specified and as directed.Note :- (i) Modular switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. (ii) PVC conduit and junction box shall be provided on open surface of metal /brick wall/ceiling /along MS pipe / under false ceiling etc and sunken terminal box concealed in wall or on surface flush fixed, all fixed with clips/clip clamps/PVC clamp /MS clamps /nut bolt /screws as directed or as per site requirement. The rate of these elements shall be deemed to be included in the unit rate quoted nothing shall be paid extra on this account. 407 Supply only modular switch 6Amps, single pole, one way (1 module) complete all as specified and as directed. 408 Supply only modular switch 6Amps, single pole, two way complete all as specified and as directed. 409 Supply only modular switch 16Amps, single pole, one way (1 module) complete all as specified and as directed. 410 Supply only modular Bell Push switch, 6Amps, single pole, one way (1 module) complete all as specified and as directed. 411 Supply only modular Socket outlet multipurpose type 3 pin, 6 Amp, flush type (2 module) complete all as specified and as directed. 412 Supply only modular Socket outlet multipurpose type 3 pin, 16 Amp, flush type (2 module) complete all as specified and as directed. 413 Supply and fixing modular stepped type (1-4/5), electronic Fan regulator, 100-120 watt,250 volts, (2 module) suitable for other than BLDC fan complete all as specified and as directed. 414 Supply and fixing Ceiling Rose, polycarbonate, isolated body, surface bakelite 3 terminal, topline series, 240 volts, 5/6 Amp, fixing on surface of metal/wall or any other situation along with cover the ceiling rose backside with bakelite plastic laminated sheet (Electrical-grade, like Hylam, or as phenolic laminate sheet) complete all as specified and as directed. 415 Supply and fixingelectric calling Bell Ding Dong type, AC 230 Volts single pole including making elctric connection complete all as specified and as directed by Engr-in-charge. 416 Supply and fixing Automatic Bell management system with multipurpose timer and ringer designed for schools / public places / swimming pools having separate programming and customizable settings for hassle free programming and scheduling complete all as per manufacturers instructions and as directed. 417 Supply and fixing lamp holder (ISI marked) polycarbonate cased body (B22 base), top line series, with back plate, 6Amps, fixing on surface of metal/wall or any other situation along with cover the holder backside with bakelite plastic laminated sheet (Electrical-grade, like Hylam, or as phenolic laminate sheet) complete all as specified and as directed. 418 Supply and fixing LED retrofit lamp, minimum 3 star rated 9/10W LED B-22 base complete all as specified and directed by Engr-in-Charge with following specifications(a) Lumen system efficacy of lamp should be minimum 90 Lumen per watt.(b) Input Voltage range : 140 to 270 volts(c) Temp operating range : Minus 10°C to Plus 45°C(d) Power factor : Minimum 0.95(e) CRI: Morethan80 419 Supply and fixing in replacement (concealed flush to wall) factory made VTPN (Vertical type), 4 Way 415V, as per IEC 61439-3, DB (made out of CRCA sheet not less than 1.2mm thick, with copper bus bar rating 200 Amps, with two neutral bar, 2 earth bar and cable tie for cable management, including in built one number MCCB 4 pole 160Amp, 25KA as incomer,DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-54 protection class, and including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed.. 420 Supply and fixing in replacement (concealed flush to wall) factory made VTPN (Vertical type), 4 Way 415V, as per IEC 61439-3, DB (made out of CRCA sheet not less than 1.2mm thick, with copper bus bar rating 200 Amps, with two neutral bar, 2 earth bar and cable tie for cable management, including in built one number MCCB 4 pole 125Amp, 25KA as incomer,DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-54 protection class, and including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed.. 421 Supply and fixing in replacement (concealed flush to wall) factory made VTPN (Vertical type), 8 Way 415V, as per IEC 61439-3, DB (made out of CRCA sheet not less than 1.2mm thick, with copper bus bar rating 200 Amps, with two neutral bar, 2 earth bar and cable tie for cable management, including in built one number MCCB 4 pole 125Amp, 25KA as incomer,DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-54 protection class, and including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed.. 422 Supply and fixing in replacement (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 250 Amp rated bus bar) TPN, 4 Way, 415V AC supply, As per IEC 61439-3, suitable for mounting Isolator/MCB, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-43 protection class, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed.Note :- MCB/ISOLATOR shall be measured and paid separately under appropriate item of BOQ. 423 Supply and fixing in replacement (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 250 Amp rated bus bar) TPN, 12 Way, 415V AC supply, As per IEC 61439-3, suitable for mounting Isolator/MCB, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-43 protection class, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed.Note :- MCB/ISOLATOR shall be measured and paid separately under appropriate item of BOQ. 424 Supply and fixing in replacement (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 200 Amp rated bus bar) SPN, 12 Way, 240V AC supply, As per IEC 61439-3, suitable for mounting Isolator/MCB, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-43 protection class, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed.Note :- MCB/ISOLATOR shall be measured and paid separately under appropriate item of BOQ. 425 Supply and fixing in replacement (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 200 Amp rated bus bar) SPN, 8 Way, 240V AC supply, As per IEC 61439-3, suitable for mounting Isolator/MCB, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-43 protection class, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed.Note :- MCB/ISOLATOR shall be measured and paid separately under appropriate item of BOQ. 426 Supply and fixing in replacement (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 200 Amp rated bus bar) SPN, 4 Way, 240V AC supply, As per IEC 61439-3, suitable for mounting Isolator/MCB, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-43 protection class, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed.Note :- MCB/ISOLATOR shall be measured and paid separately under appropriate item of BOQ. 427 Supply and fixing (concealed in wall or as directed) single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20/25 Amps, 240 volts, AC supply including taking down unserviceable old any type complete all as specified and as directed. 428 Supply and fixing MCB ‘C’ curve suitable for 415 volts AC supply, 40 to 63Amps, TPN with over load and short circuit protection and rupturing capacity not less than 10 KA,fixing in DB/panel complete all as specified and as directed. 429 Supply and fixing MCB ‘C’ curve suitable for 240 volts AC supply, 32 Amps, SPN with over load and short circuit protection and rupturing capacity not less than 10 KA,fixing in DB/panel complete all as specified and as directed. 430 Supply and fixing MCB ‘C’ curve suitable for 240 volts AC supply, 40 to 63 Amps, SPN with over load and short circuit protection and rupturing capacity not less than 10 KA,fixing in DB/panel complete all as specified and as directed. 431 Supply and fixing MCB ‘B’ curve suitable for 240 volts AC supply, 06 to 32 Amps, SP with over load and short circuit protection and rupturing capacity not less than 10 KA,fixing in DB complete all as specified and as directed. 432 Supply and fixing RCBO for earth leakage, over load and short circuit protection 10 KA, suitable for 240 volts AC supply, 40-63 Amps, 300mA, Double Pole,fixing in DB/panel complete all as specified and as directed. 433 Supply and fixing RCBO for earth leakage, over load and short circuit protection 10 KA, suitable for 240 volts AC supply, 6-32 Amps, 300mA, Double Pole,fixing in DB/panel complete all as specified and as directed. 434 Taking down existing LED tubelight, bed side lamp, ceiling light, panel light, bulk head light etc of any size complete all as specified and as directed. 435 Taking down existing LED out door security/street light fitting with GI bracket & clamps/Flood light including clamps of any size complete all as specified and as directed. 436 Supply and fixing LED tube light fitting polycarbonate housing 1 x 18/20/22Watt, appx 4 feet long, housing environment friendly, including electric connection with using suitable size flexible copper conductor cable, complete fitting with all accessories and following specifications, complete all as specified and directed. :- (a) Lumen system efficacy of luminaire should be minimum 110 Lumen per watt.(b) Input Voltage range : 140 to 270 volts.(c) Temp operating range : Minus 5°C to Plus 45°C(d) Power factor : Minimum 0.95 (e) THD : Current THD Max10% and voltage THD max 5%(f) IP rating : IP-20.(g)LED Driver of the same make as of the luminaire.(h) LED driver should be complete with all protections vizopen/short circuit protection, over voltage protection, all as per standard design of manufacturer.(j) Surge protection minimum 2.5 kV. (k) CCT : Minimum 6000K(l) CRI : Minimum 80 (m) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily) 437 Supply and fixingLED light fitting 1 x 8/10Watt, appx 2 feet long LED lighting fixture with extruded polycarbonate environment friendly, including electric connection with using suitable size flexible copper conductor cable, complete fitting with all accessories and following specifications, complete all as specified and directed. :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 5°C to Plus 45°C(d) Power factor : Minimum 0.95(e) THD : Current THD Max10% and voltage THD max 5% (f) IP rating : IP-20. (g) CRCA pre coated housing with plastic end cap.(h) LED Driver of the same make as of the luminaire. (j) LED driver should be complete with all protections vizopen/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection minimum 2.5 kV.(l) CCT : Minimum 6000K(m) CRI : Minimum 80(n) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily) 438 Supply and fixing LED fitting 1 x 10/12Watt, complete with Standard LED lighting fixture with extruded polycarbonate housing, environment friendly, (wall mounted/surface mounted Bulkhead fitting/ Cylindrical fitting / Doom profile etc) including electric connection with using suitable size flexible copper conductor cable, complete fitting with all accessories complete all as specified and as directed. 439 Supply and fixing LED 1 x 10 Watt indoor Wall mounted/Ceiling Spot Light/Focus Light (Warm White), Flexibly Rotatable Light Head, suitable for Home Decor, Kitchen, Showrooms, Living Room, etc. (as per sample), including electric connection with using suitable size flexible copper conductor cable, complete fitting with all accessories complete all as specified and as directed. 440 Supply and fixing recessed type LED ceiling light fitting with wide light window for maximised glare free output, suitable for ceiling cutout 595x595mm modular grid/POP ceiling finishes complete fitting with driver and high brightness LED 34/35/36 Watt flat panel of size 600x600mm, including electric connection with using suitable flexible copper conductor cable from ceiling rose to light fitting, complete fitting and all accessories with following specifications and all as directed:-(a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt.(b) Input Voltage range : 140 to 270 volts(c) Temp operating range : Minus 10°C to Plus 45°C(d) Power factor : Minimum 0.95 (e) THD : Max10%.(f) IP rating : IP20.(g) CCT : 6500K(h) CRI : Morethan 80 (j) CRCA pre coated housing.(k) LED Driver of the make as of the luminaire.(l) LED driver should be complete with all protections vizopen/short circuit protection, over voltage protection, all as per standard design of manufacturer. (m) Surge protection minimum 3 kV.(n) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily) 441 Supply and fixing wall mounted fency type bed side lamp(as per sample) with provision of LED lamp of 5 watt lamp, including electric connection, complete fitting with all accessories and following specifications, complete all as specified and as directed. :- (a) Lumen system efficacy of luminaire should be minimum 90 Lumen per watt.(b) Input Voltage range : 140 to 270 volts. (c) Temp operating range : Minus 5°C to Plus 45°C(d) Power factor : Minimum 0.95 (e) THD : Current THD Max10% and voltage THD max 5%(f) IP rating : IP-20. (f) (e) CRI: Morethan80 442 Supply and fixing wall mounted study lamp (as per sample) bi-directional type prewired with provision of lamp holder B22 based including LED lamp 9 watt, including electric connection, complete fitting with all accessories and following specifications, complete all as specified and as directed. :- (a) Lumen system efficacy of luminaire should be minimum 90 Lumen per watt.(b) Input Voltage range : 140 to 270 volts. (c) Temp operating range : Minus 5°C to Plus 45°C(d) Power factor : Minimum 0.95 (e) THD : Current THD Max10% and voltage THD max 5%(f) IP rating : IP-20. (f) (e) CRI: Morethan80 443 Supply and fixing LED light fitting 9/10 Watt, 12V, suitable for underwater in swimming pool, recessed or surface mounted as directed, tempered glass with protection class of IP-68, including connection and waterproof jointing etc, complete fitting with all accessories and fixing arrangements complete all as specified and as directed. 444 Supply and fixing SMPS 20 Amp LED Driver complete all as specified and as directed. 445 Supply and fixing energy efficient LED wide angle flood light fittings of 150 W capacity with driver, Epoxy powder coated pressure die cast aluminium alloy housing and front cover clear toughned glass, including electric connection with suitable copper cable and including fixing arrangement with suitable nut bolts or any hanging hook etc, complete fitting and all accessories with following specifications and all as directed by Engr-in-Charge :-(a) Lumen system efficacy of luminaire should be minimum 110 Lumen per watt.(b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95(e) THD : Max10%.(f) IP rating : IP66. (g) IK rating:Minimum IK07 (h) Built in potted LED Driver of the make as of the luminaire.(j) LED driver should be complete with all protections vizopen/short circuit protection, over voltage protection, all as per standard design of manufacturer.(k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K. (m) CRI: More than 70 (n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily) 446 Supply and fixing energy efficient LED security light fitting of 25 W pressure die cast aluminium housing/body, heat resistant clear toughened glass,better optics for uniform distribution street luminaire, with driver, including electric connection with using 3 core flexible copper conductor cable 1.5 Sqmm, fixing the light fitting with new bracket made out of GI tubing light grade 25mm dia, 1.2 metre long bent to shape at 120 degree angle at half metre from bottom, including two Nos clamps made out of MS Flat iron size 25x3 mm with suitable nuts and bolts for fixing of bracket along wall including painting to bracket, MS clamp and nut bolts with two coats of aluminium paint over a coat of red oxide primer, complete fitting with all accessories and following specifications, complete all as specified and directed. :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt.(b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95(e) THD : Max10%.(f) IP rating : IP66. (g) IK rating:Minimum IK07 (h) Built in potted LED Driver of the make as of the luminaire.(j) LED driver should be complete with all protections vizopen/short circuit protection, over voltage protection, all as per standard design of manufacturer.(k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K. (m) CRI: Minimum 70 (n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily) 447 Supply and fixing energy efficient LED security light fitting of 45 W pressure die cast aluminium housing/body, heat resistant clear toughened glass,better optics for uniform distribution street luminaire, with driver, including electric connection with using 3 core flexible copper conductor cable 1.5 Sqmm, fixing the light fitting with new bracket made out of GI tubing light grade 25mm dia, 1.2 metre long bent to shape at 120 degree angle at half metre from bottom, including two Nos clamps made out of MS Flat iron size 25x3 mm with suitable nuts and bolts for fixing of bracket along wall including painting to bracket, MS clamp and nut bolts with two coats of aluminium paint over a coat of red oxide primer, complete fitting with all accessories and following specifications, complete all as specified and directed. :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt.(b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95(e) THD : Max10%.(f) IP rating : IP66. (g) IK rating:Minimum IK07 (h) Built in potted LED Driver of the make as of the luminaire.(j) LED driver should be complete with all protections vizopen/short circuit protection, over voltage protection, all as per standard design of manufacturer.(k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K. (m) CRI: Minimum 70 (n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily) 448 Taking down carefully existing sub main wiring any run any size including rusted/broken concealed conduit, junction boxes etcand making good disturbed surface of walls/floors etc complete all as specified and as directed. 449 Material and labour for concealed sub main wiring (Three run i.e. 1 x phase and 1 x netural and one run for continues as earth wire connected to earth dolly etc., using red, black and green colour wires as colour coding) with 2.5 Sqmm single core, FRLSH PVC insulated multistrand copper conductor drawn through and including PVC conduit 20mm dia (medium quality ISI marked), on independent circuit from panel/DB including all fitting arrangement i.e. PVC clamp, rawl plug, screw, terminal/junction box, tee, bend etc. and including cutting of chases in wall, complete all as specified and as directed.Note :-Three run of copper wire and one run conduit shall be measured as one RM length for payment but extra length of cables required for connection to MCBs/DB shall not be measured and the cost for the same shall deemed to be included in the unit rate. 450 Material and labour for concealed sub main wiring (Three run i.e. 1 x phase and 1 x netural and one run for continues as earth wire connected to earth dolly etc., using red, black and green colour wires as colour coding) with 4 Sqmm single core, FRLSH PVC insulated multistrand copper conductor drawn through and including PVC conduit 20mm dia (medium quality ISI marked), on independent circuit from panel/DB including all fitting arrangement i.e. PVC clamp, rawl plug, screw, terminal/junction box, tee, bend etc. and including cutting of chases in wall, complete all as specified and as directed.Note :-Three run of copper wire and one run conduit shall be measured as one RM length for payment but extra length of cables required for connection to MCBs/DB shall not be measured and the cost for the same shall deemed to be included in the unit rate. 451 Material and labour for concealed sub main wiring (Three run i.e. 1 x phase and 1 x netural and one run for continues as earth wire connected to earth dolly etc., using red, black and green colour wires as colour coding) with 6 Sqmm single core, FRLSH PVC insulated multistrand copper conductor drawn through and including PVC conduit 25mm dia (medium quality ISI marked), on independent circuit from panel/DB including all fitting arrangement i.e. PVC clamp, rawl plug, screw, terminal/junction box, tee, bend etc. and including cutting of chases in wall, complete all as specified and as directed.Note :-Three run of copper wire and one run conduit shall be measured as one RM length for payment but extra length of cables required for connection to MCBs/DB shall not be measured and the cost for the same shall deemed to be included in the unit rate. 452 Material and labour for concealed sub main wiring (Three run i.e. 1 x phase and 1 x netural and one run for continues as earth wire connected to earth dolly etc., using red, black and green colour wires as colour coding) with 10 Sqmm single core, FRLSH PVC insulated multistrand copper conductor drawn through and including PVC conduit 25mm dia (medium quality ISI marked), on independent circuit from panel/DB including all fitting arrangement i.e. PVC clamp, rawl plug, screw, terminal/junction box, tee, bend etc. and including cutting of chases in wall, complete all as specified and as directed.Note :-Three run of copper wire and one run conduit shall be measured as one RM length for payment but extra length of cables required for connection to MCBs/DB shall not be measured and the cost for the same shall deemed to be included in the unit rate. 453 Disconnecting electric connection and taking down carefully serviceable ceiling fans and keep in safe custody. After the building repair work or as directed re-fixing /hanging the ceiling fan including electric connection with and including new flexible copper conductor cable of suitable size from ceiling rose/connector to fan connector, including in replacement new nut bolts, rubber reel, capacitor 2.5mfd, machine screws and split pins etc including oiling and normal servicing and painting the ceiling fan complete body with blades, canopies, down rod etc. with synthetic enamel paint by spray gun after scraping down old paint, colour as directed complete all as specified and as directed.Note :- (i) Serial Number of ceiling fan issued by Engineer-in-Charge and GE Office name shall also be written on fan with red colour permanent marker.(ii) In case of any damage of fan during custody, the contractor will responsible for the same and shall be replaced/repaired by the contractor as per decision of GE without any extra cost to Govt. 454 Disconnecting electric connection and taking down carefully serviceable ceiling fans and keep in safe custody. After the building repair work or as directed re-fixing /hanging the ceiling fan including electric connection with and including new flexible copper conductor cable of suitable size from ceiling rose/connector to fan connector, including in replacement new nut bolts, rubber reel, capacitor 2.5mfd, machine screws and split pins etc including oiling and normal servicing/cleaning all dust from fan motor, blades, canopies, down rod etc.complete all as specified and as directed.Note :- (i) Serial Number of ceiling fan issued by Engineer-in-Charge and GE Office name shall also be re-written if not visible on fan with red colour permanent marker.(ii) In case of any damage of fan during custody, the contractor will responsible for the same and shall be replaced/repaired by the contractor as per decision of GE without any extra cost to Govt. 455 Supply and fixing in replacement capacitor of suitable mfd for ceiling fan / Exhaust fan complete all as specified and as directed. 456 Disconnectingelectric connection and taking down carefully ceiling fan, exhaust fan, Geyser complete with accessories and deposited to E/M store yard complete all as specified and as directed. 457 Supply and hanging /fixing ceiling fan 1200 mm sweep color white AC Supply (Input Voltage Range ; 120 to280V), BLDC type, 5 star rated, BEE and ISI Marked super enamelled, copper winding, single phase, 26-30W, Temperature rise 40 degree maximum with remote and remote holder (remote holder fixed on wall where directed), 03 No blades, down rod including accessories, white colour, total harmonic less than 10%, 5 speed, hanging in position including making connection with flexible cord three core twisted copper conductor of suitable sizefrom ceiling rose to fan complete all as specified and as directed.Note :- (i) Serial Number as issued by Engr-In-Charge of celing fan and GE Office name shall also be written on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account 458 Supply and hanging /fixing ceiling fan 1400 mm sweep color white AC Supply (Input Voltage Range ; 120 to280V), BLDC type, 5 star rated, BEE and ISI Marked super enamelled, copper winding, single phase, 26-30W, Temperature rise 40 degree maximum with remote and remote holder (remote holder fixed on wall where directed), 03 No blades, down rod including accessories, white colour, total harmonic less than 10%, 5 speed, hanging in position including making connection with flexible cord three core twisted copper conductor of suitable sizefrom ceiling rose to fan complete all as specified and as directed.Note :- (i) Serial Number as issued by Engr-In-Charge of celing fan and GE Office name shall also be written on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account 459 Supply and fixing exhaust fan (heavy duty) steel body, AC single Phase 230V, 50Hz, 900RPM, size 300mm sweep with blades and including new mosquito stainless steel wire mesh of guage 0.36mm with suitable wooden frame protection against birds etc mounted in opening in wall and electric connection with and including three core PVC Insulated PVC Sheathed copper conductor flexible cable 24/0.2mm drawn in flexible PVC conduit and hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface complete all as specified and as directed.Note :- (i) Serial Number as issued by Engr-In-Charge of fan and GE Office name shall also be written on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account 460 Supply and fixing exhaust fan (heavy duty) steel body, AC single Phase 230V, 50Hz, 900RPM, size 450mm sweep with blades and including new mosquito stainless steel wire mesh of guage 0.36mm with suitable wooden frame protection against birds etc mounted in opening in wall and electric connection with and including three core PVC Insulated PVC Sheathed copper conductor flexible cable 24/0.2mm drawn in flexible PVC conduit and hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface complete all as specified and as directed.Note :- (i) Serial Number as issued by Engr-In-Charge of fan and GE Office name shall also be written on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account 461 Supply and fixing BLDC ventilating air axial flow Fan of size 250mm sweep, single phase, 18-20W, minimum 1300RPM, copper winding, complete with louvers shutter, including electric connection with and including new suitable flexible copper conductor cable from ceiling rose to fan, complete all as specified and as directed.Note :- Serial Number of exhaust fan issued by Engr-In-Charge and GE Office name shall also be written on fan with red colour permanent marker. 462 Supply, installing, commissioning and testing of electric water heater (Geyser, vertical type) storage type ABS body of capacity 25 litre with 2kw heating element, BEE approved 5 Star rating, 230 V, single Phase, AC supply, inner tank made out of heavy duty stainless steel sheet (Designed with single weld line, factory tested with hydraulic pressure as per latest IS code) with glass lined coating complete with all accessories such as having indicating light, safety valve, thermostat, NRV, connection piece PVC connection 600mm long heavy duty suitable for Hot and cold water, three core PVC insulated PVC Sheathed copper conductor flexible cable and making connections with and including 15 amp top plug, 04 Nos suitable size mild steel L-Hook fastener with washer for hanging the geyser and making good the disturbed surface complete all as specified and directed by Engr-in-Charge. Note (a) Contractor shall submit original purchase voucher and warranty card as recommended by manufacturer.(b) Serial Number of geyserissued by Engr-In-Charge and GE Office name shall also be written on geyser with red colour permanent marker or paint, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. 463 Material and labour for Cutting openings, through brick walls built in cement mortar at ground/first/second floor for exhaust fan 250/300/450mm sweep including making good with cement mortar (1:4) complete all as specified and directed. 464 Material and labour for Earthing complete with galvanised iron earth plate electrode of size 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including GIearthing wire 4 mm dia by means of GI bolts/nuts/washers and protected by 15 mm bore GI medium grade pipe upto test point or upto main switch board, fixing with 02 Nos nuts and bolts. Earth plate shall be surrounded by alternate packed layer 15 cm thick of charcoal or coke and common saltall around bottom and top. 20 mmbore GI medium grade pipe for watering and including funnel, wire mesh, PCC chamber pit made with PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) including necessary form work, excavation and earth work in any type ofsoil, returning filling and disposal of surplus soil to a distance not exceeding 50m,Pit cover 40mm thick made with RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) including TMT reinforcement 8mm dia @ 75mm c/c both way, MS handle 12mm dia, cover rest on MS angle iron frame 40x40x6mm embeded in concrete duly painted with two coats of synthetic enamel paint over a coat ofred oxide primer, complete all as specified & shown in electrical plate No. 3 ofSSR 2009 (Part-I) including taking out/dismantling old unserviceable earthing system complete all as specified and as directed.Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) Protection pipe and GI earthing wire upto test point or upto electric equipment from top of earth plate shall be included in the unit rate of this item. (iii) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge. 465 Supply and laying XLPE LT Cable of size 16 Sqmm, 2 core, 1100 Volt grade heavy duty with XLPE insulated, stranded aluminium conductor served with an inner sheathening of PVC tape armoured with Galvanized steel strip or wire and over all PVC Sheathed stranded conductor conforming to IS- 7098 (Part-I) with latest amendments laid in trenches/fixed to wall/pole/laid in floor including necessary connections and suitable size of thimbling complete all as specified and as directed. Note :- (i) Excavation, earth work, cutting of road/boring under road and protection pipe shall be measured & paid separately under appropriate item of this Schedule/BOQ.) 466 Supply and laying XLPE LT Cable of size 25 Sqmm, 3.5 core, 1100 Volt grade heavy duty with XLPE insulated, stranded aluminium conductor served with an inner sheathening of PVC tape armoured with Galvanized steel strip or wire and over all PVC Sheathed stranded conductor conforming to IS- 7098 (Part-I) with latest amendments laid in trenches/fixed to wall/pole/laid in floor including necessary connections and suitable size of thimbling complete all as specified and as directed. Note :- (i) Excavation, earth work, cutting of road/boring under road and protection pipe shall be measured & paid separately under appropriate item of this Schedule/BOQ.) 467 Supply and laying XLPE LT Cable of size 50 Sqmm, 3.5 core, 1100 Volt grade heavy duty with XLPE insulated, stranded aluminium conductor served with an inner sheathening of PVC tape armoured with Galvanized steel strip or wire and over all PVC Sheathed stranded conductor conforming to IS- 7098 (Part-I) with latest amendments laid in trenches/fixed to wall/pole/laid in floor including necessary connections and suitable size of thimbling complete all as specified and as directed. Note :- (i) Excavation, earth work, cutting of road/boring under road and protection pipe shall be measured & paid separately under appropriate item of this Schedule/BOQ.) 468 Supply and laying XLPE LT Cable of size 70 Sqmm, 3.5 core, 1100 Volt grade heavy duty with XLPE insulated, stranded aluminium conductor served with an inner sheathening of PVC tape armoured with Galvanized steel strip or wire and over all PVC Sheathed stranded conductor conforming to IS- 7098 (Part-I) with latest amendments laid in trenches/fixed to wall/pole/laid in floor including necessary connections and suitable size of thimbling complete all as specified and as directed. Note :- (i) Excavation, earth work, cutting of road/boring under road and protection pipe shall be measured & paid separately under appropriate item of this Schedule/BOQ.) 469 Supply and laying double wall corrugated pipe (DWC) non metalic, Resistance to compression -type 450, resistance to impact -normal, resistance to bending - pliable , resistance to external influence- ingress protection IP67, resistance against corrosion - without protection, resistance to flame propagation-Non flame propagation, Nominal outside diameter 63mm, minimum inside diameter 47mm confirming to IS 16205 (Part-24) -2017 complete all as specified and as directed. 470 Supply and laying double wall corrugated pipe (DWC) non metalic, Resistance to compression -type 450, resistance to impact -normal, resistance to bending - pliable , resistance to external influence- ingress protection IP67, resistance against corrosion - without protection, resistance to flame propagation-Non flame propagation, Nominal outside diameter 50mm, minimum inside diameter 37mm confirming to IS 16205 (Part-24) -2017 complete all as specified and as directed. 471 Material and labour for boring of holes (trenchless horizontel hole) under road pavement, hard standing or any other situation by using trenchless boring machine/mechanically or by manual manpower suitable for for accommodate/inserting pipe upto 100mm bore in the drilled holes, including excavation, returning filling in the end working space including removal of surplus soil and making good the surface complete all as specified and as directed.Note ; (i)Only length of the road/hard standing/Pavement will be measured for payment and cost for excavation, returning filling and making good at both side of bore shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.(ii) Pipe shall be measured and paid separately) 472 Supply and fixing GI tubing light grade of size 40 mm bore, ISI marked, fixed along steel poles/along PCC pole / along walls for cable protection including fittings like elbow, tee, socket, clamp with nut bolts etc) complete all as specified and as directed. 473 Supply and fixing GI tubing light grade of size 50 mm bore, ISI marked, fixed along steel poles/along PCC pole / along walls for cable protection including fittings like elbow, tee, socket, clamp with nut bolts etc) complete all as specified and as directed. 474 Supply and fixing GI tubing light grade of size 80 mm bore, ISI marked, fixed along steel poles/along PCC pole / along walls for cable protection including fittings like elbow, tee, socket, clamp with nut bolts etc) complete all as specified and as directed. 475 Dismantling of choked flat collector solar panel from existing platform after disconnecting all water connection unscrewing nut, bolts and washer, removing the collector glass and absorption plate and descaling/cleaning /removing the blockage of internal copper tubing using recommended chemicals, including drilling of copper tubing, and gas welding to stop affected leakage spot and re-fixing the panel to its original position complete all as specified and as directed. 476 Supply and fixing in replacement Flat plate collector size 1860 mm x 1240mm x 90 mm ISI marked and as per site requirement, assembly suitable for solar water system existing size and capacity with copper tube black coat/radiation reflector film, aluminum toughed glass,complete all as specified and as directed. 477 Taking down old any type ordinary fittings measured against BOQ item No 465 to 475 here-in-after like switch/socket /regulator/cover plate etc complete all as specified and as directed. 478 Supply and fixing modular touch switch (ISI marked) for automation system, Wifi controlled 1 way, 6A, 2 module, 240Volts, AC supply, model fantasy including suitable frame and covers with matching colour complete all as specified and as directed. 479 Supply and fixing modular touch socket (ISI marked) for automation system, Wifi controlled6A-2/3 pin combined with shuttered, 240Volts, AC supply, model fantasy including suitable frame and covers with matching colour complete all as specified and as directed. 480 Supply and fixing modular touch switch (ISI marked) for automation system, Wifi controlled 1 way, 16A, 2 module, 240Volts, AC supply, model fantasy including suitable frame and covers with matching colour complete all as specified and as directed. 481 Supply and fixing modular touch socket (ISI marked) for automation system, Wifi controlled6/16A-2/3 pin combined with shuttered, 240Volts, AC supply, model fantasy including suitable frame and covers with matching colour complete all as specified and as directed. 482 Supply and fixing modular touch Bell switch (ISI marked) for automation system, Wifi controlled 6A, 240Volts, AC supply, complete all as specified and as directed. 483 Supply and fixing modular touch Telephone switch (ISI marked) for automation system, Wifi controlled 6A, 240Volts, AC supply, complete all as specified and as directed. 484 Supply and fixing modular touch electronic fan regulator (ISI marked) for automation system, Wifi controlled 6A, 2 module, 240Volts, AC supply, model fantasy including suitable frame and covers with matching colour complete all as specified and as directed. 485 Supply and fixing modular plate of 2 module for mounting of automation system, Wifi controlled switch/socket/bell switch/telephone switch/regulator etc complete all as specified and as directed. 486 Supply and fixing modular plate of 4 module for mounting of automation system, Wifi controlled switch/socket/bell switch/telephone switch/regulator etc complete all as specified and as directed. 487 Supply and fixing modular plate of 6 module for mounting of automation system, Wifi controlled switch/socket/bell switch/telephone switch/regulator etc complete all as specified and as directed. 488 Supply and fixing modular plate of 8 module for mounting of automation system, Wifi controlled switch/socket/bell switch/telephone switch/regulator etc complete all as specified and as directed. 489 Supply and fixing curtain control automation system, Wifi controlled complete all as specified and as directed.

INR 3000 /-

INR 9.66 Crore /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB