|
| 1 | M&L for Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n.exc 400 sqm and n.exc 50mm deep and disposal of the same to a distance n.exc 250m complete all as specified and directed. |
| 2 | M&L for Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n.exc 400 sqm and exc 50mm deep but n.exc 100mm deepand disposal of the same to a distance n.exc 250m complete all as specified and directed. |
| 3 | M&L for Preparing unsurfaces WMM/WBM by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a prime coat of Cationic Bitumen Emulsion SS1 confirming to IS: 8887 at rate of application of 0.7-1 kg/sqm on surface of WMM/WBM as specified in Table 500-3 of MoRTH specification for road and bridge works 2013, using mechanical sprayer complete all as specified and directed. |
| 4 | Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming and applying evenly a prime coat of Cationic Bitumen Emulsion SS1 confirming to IS: 8887 at rate of application of 0.7-1 kg/sqm on surface of WMM/WBM as specified in Table 500-3 of MoRTH specification for road and bridge works 2013, using mechanical sprayer complete all as specified and directed. |
| 5 | M&L for applying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) conforming to IS: 8887 at a rate of application of 0.2-0.3 kg/sqm on bituminous surface as specified in Table 500-5 of MaRTH specification for road and bridge works 2013, using mechanica sprayer after cleaning of existing surfacecomplete all as specified and directed. |
| 6 | M&L for Bituminous premix semi dense asphaltic concrete 30 mm consolidated thickness with 5.5% binder content with paving bitumen VG-30 by weight of total mix, rolled and compacted to required camber and gradient using hot mix plant and mechanical paver complete all as specified. Note: If actual design mix covers less than 5.5% binder content, then rate of recovery of bitumen shall be as per rate in purchase voucher per KG for the purpose of adjustment. No adjustment shall be made if the design mix binder content is more than 5.5% complete all as specified and directed. |
| 7 | M&L for laying and compacting 75 mm thick (compacted thickness) Wet Mix Macadam (WMM) grading as pe table 400-13 of MaRTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100 KN static weight and consolidating to required gradien and camber complete all as specified and directed The finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge works 2013 complete all as specified and directed. |
| 8 | M&L premix bituminous macadam using binder content (paving bitumen VG-30) of 4.5% (minimum) by weight of the total mix laid / rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) using hot mix plant, laid to a required profile / level using mechanical paver and rolled to a uniform smooth surface with a power roller of 8 to 12 tonne complete all as specified and directed. |
| 9 | M&L for Surface dressing not exceeding 15cm deep and getting out in any type soil as in berms including uprooting of grass/spalings etc and removing rubbish to a distance not exceeding 50m complete all as specified |
| 10 | M&L for 100mm thick Moorum/red bajri filling brought from outside MD land spreading, levelling in layers not exc 25cm thick, well ramming and watering as required, as in road side berms complete all as specified and directed. Note: 10% (Ten percent) deduction shall be made from the quantity computedcomplete all as specified and directed. |
| 11 | M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 12 | M&L in repairs Delineator 600 mm long all directional retro reflected round delineator short made out of 18 gauge MS pipe of outer Dia 47mm, Delineator powder coated to have 200 mm wide high intensity reflective band of colour white and red. Reflective bands protected with welded wire mesh cage and including fixing in cement concrete 1:2:4 type B1 by using 20mm graded stone aggregate with size of block 150mmx150mmx300mm deep including earth work excavation and removal of soil to a distance n.exe 50m complete all as specified and directed.Note : - The rate of PCC & earth work is included in this item and nothing shall be extra paid. Make : Greenlite Cat Part No. GPL 11-20or equivqlent make of 3M/Dark eye/ Ace/Trafitronics/Lion/Automat or Equivalent MES approved. |
| 13 | M&L Bi-Directional reflective road studs / Cat Eye of ABS Plastic body of dimensions 100 x 115 mm, having 30 degree micro cube corner spark glow reflector white/ red/ yellow fixing with nail and including taking down complete all as specified and directed. Note :- Cat eye shall conform to ASTm D-4280 and mort 7th from CRRI New Delhi and model ALEXIX-1402 or equivalent. |
| 14 | S&F in repairs Reflector round type, Dia: 144.5mm, Colour in Red, Amber or White complete all as specified and directed.Make : Greenlite/ 3M/Dark eye/ Ace/ Trafitronics/ Lion/Automat or Equivalent MES approved make |
