|
| 1 | Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials n exe 50mtr and depositing where directed at a level not exe 1.5mtr above starting point complete all as specified and directed. |
| 2 | M&L for 100mm thick,cement concrete type B-1 (1:2:4) using 20mm graded granite stone aggregate as in paths finished with even and smooth without using extra cement complete all as specified and directed. |
| 3 | M&L for Forming construction joints 30mm deep x 10mm wide filled with sealing compound grade `A\",complete all as specified and directed. |
| 4 | Dismantling of stone slab and tiles of any description orthickness in floor aprons etc laid bedded and pointed in any mortarcomplete all as specified and directed. |
| 5 | M&L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as insub base, surface finished fair and evencomplete all as specified and as directed. |
| 6 | M&L for sand filling under floor including spreading, levelling,watering, consolidation and well ramming in layers not exc 50mm thickness as in sand complete all as specified and directed.Note: 10% (Ten percent) deduction shall be made from the quantity computed based on initial and final levels). |
| 7 | M&L for 80mm thick factory made machine pressed cement concrete interlocking paver block of M40 grade confirming to IS 15658-2006, made by block making machine with strong vibratory compaction, of approved shape, size, colour and pattern, laid over and jointed, pointed in grey cement and pigment, complete all as specified and directed.. Make: NATIONAL / NITCO/NIMCO / METRO / VITCO / ULTRA / ANJALI / TERRA FIRMA / Mehtab Tiles |
| 8 | M&L screed bed or bedding layer of cement mortar (1:6), 20mm thick for laying floor finishes etc complete all as specified and as directed by Engineer-in-Charge. |
| 9 | M&L in repairs for prepolished chequered cement concrete tiles with grey cement & pigment of size 30cmx30cmx22 to 25mm thick,shape and colour approved by the GE, highly abrasive and skid resistant, impact resistant, chemically treated, ISI marked (IS 13801) compressive strength of 300 Kg/Sqcm laid in floor,set,jointed & pointedwith neat cement slurry with white cement mixed with colour pigment to match with the tiles complete all as specified anddirected.Make: NATIONAL / NITCO/NIMCO / METRO / VITCO / ULTRA / ANJALI / TERRA FIRMA / Mehtab Tiles |
| 10 | M&L in repair for providing cast-in-situ cement concrete type B-1, 1:2:4, (using 20 mm graded granite stone aggregate) as in kerb stone and the like, including necessary formwork, rounded or chamfered on edges,complete all as specified and directed. |
| 11 | M&L for Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n.exc 400 sqm and n.exc 50mm deep and disposal of the same to a distance n.exc 250m complete all as specified and directed. |
| 12 | Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming and Applying evenly a prime coat of Cationic Bitumen Emulsion SS1 confirming to IS: 8887 at rate of application of 0. 7-1 kg/sqm on surface of WMM/WBM as specified in Table 500-3 of MoRTH specification for road and bridge works 2013, using mechanical sprayer complete all as specified and directed. |
| 13 | M&L for applying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) conforming to IS: 8887 at a rate of application of 0.2-0.3 kg/sqm on bituminous surface as specified in Table 500-5 of MaRTH specification for road and bridge works 2013, using mechanica sprayer after cleaning of existing surfacecomplete all as specified and directed. |
| 14 | M&L for Bituminous premix semi dense asphaltic concrete 30 mm consolidated thickness with 5.5% binder content with paving bitumen VG-30 by weight of total mix, rolled and compacted to required camber and gradient using hot mix plant and mechanical paver complete all as specified. Note: If actual design mix covers less than 5.5% binder content, then rate of recovery of bitumen shall be as per rate in purchase voucher per KG for the purpose of adjustment. No adjustment shall be made if the design mix binder content is more than 5.5% complete all as specified and directed. |
| 15 | M&L premix bituminous macadam using binder content (paving bitumen VG-30) of 4.5% (minimum) by weight of the total mix laid / rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) using hot mix plant, laid to a required profile / level using mechanical paver and rolled to a uniform smooth surface with a power roller of 8 to 12 tonne complete all as specified and directed. |
| 16 | M&L for Surface dressing not exceeding 15cm deep and getting out in any type soil as in berms including uprooting of grass/spalings etc and removing rubbish to a distance not exceeding 50m complete all as specified |
| 17 | M&L for 100mm thick Moorum/red bajri filling brought from outside MD land spreading, levelling in layers not exc 25cm thick, well ramming and watering as required, as in road side berms complete all as specified and directed. Note: 10% (Ten percent) deduction shall be made from the quantity computedcomplete all as specified and directed. |
| 18 | M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 19 | M&L in repairs Delineator 600 mm long all directional retro reflected round delineator short made out of 18 gauge MS pipe of outer Dia 47mm, Delineator powder coated to have 200 mm wide high intensity reflective band of colour white and red. Reflective bands protected with welded wire mesh cage and including fixing in cement concrete 1:2:4 type B1 by using 20mm graded stone aggregate with size of block 150mmx150mmx300mm deep including earth work excavation and removal of soil to a distance n.exe 50m complete all as specified and directed.Note : - The rate of PCC & earth work is included in this item and nothing shall be extra paid. Make : Greenlite Cat Part No. GPL 11-20or equivqlent make of 3M/Dark eye/ Ace/ Trafitronics/ Lion/ Automat or Equivalent MES approved. |
| 20 | M&L Bi-Directional reflective road studs / Cat Eye of ABS Plastic body of dimensions 100 x 115 mm, having 30 degree micro cube corner spark glow reflector white / red / yellow fixing with nail and including taking down complete all as specified and directed. Note :- Cat eye shall conform to ASTm D-4280 and mort 7th from CRRI New Delhi and model ALEXIX-1402 or equivalent. |
| 21 | S&F in repairs Solar Road Studs having3 LED of colours red/yellow to a side (total-06 Nos) housed in a tough pressure dia casted aluminium alloy of any size 120 x 130mm of height 20mm built in stem-nail 30 mm x 50 mm long for fixing with epoxy. LEDs, Solar - cells, battery & light sensor roof, system workable 2-3days after full charge in 8-10 hours,complete all as specified and directed. Make : Greenlite CAT No- GPL-03-01 or equivqlent make of 3M/Dark eye/ Ace/ Trafitronics/ Lion/Automat or Equivalent MES approved make. |
| 22 | S&F in repairs Reflector round type, Dia: 144.5mm, Colour in Red, Amber or White complete all as specified and directed.Make : Greenlite/ 3M/Dark eye/ Ace/ Trafitronics/ Lion/Automat or Equivalent MES approved make. |
