Tender For Repair To The Admin Building Corridors Rooms And Repair To The Toilets In Admin Building At Ofd; 1 Civil Works Items 2 M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface with Broken Bricks 3 Cement concrete in foundations, filling and mass concrete Type B2 1:2:4 (40 mm graded Aggregate) 4 M&L for providing RCC in Slabs supported on walls, beams and columns etc., roofs, landings, balconies, lintel, canopies, deck slabs and in shelves and the like with Type B0 1:2:4 (12.5mm graded aggregate) 5 Brickwork with sub class ‘B’ bricks, straight or curved on plan exc. 6m mean radius built in 1:6 cement mortar 6 Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick walls 7 S&F of Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 20 mm thick 8 M&L for Formwork to sides and soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) 9 Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each without taking off the shutters from frame 10 Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, including 5.0 mm thick frosted glass all complete as per approved drawing &direction of Engineer-in-Charge. 11 Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality including 5 mm thick frosted glass complete all as specifiedand directed by Engineer-in- Charge. 12 S&F of Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed with aluminium die cast body 13 M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips 14 Providing and fixing false ceiling at all heights with GRG( glass fibre reinforced gypsum) false ceiling ties of size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO 0.50 t m0.75 as per IS 8225:1987, non combustible as per BS 476(part 4)- 1970 and light reflectance of 85%(minimum) to be laid in true horizontal level suspended on interlocking metal T grid of hot dip galvanised iron section of 0.33 mm thick (galvanised @ 120 grams per sqm including both sides) comprising of main T runners of size 15x32 mm of length of length 3000 mm, cross T of size 15x32 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm, suspended from ceiling using galvanised mild steel items (galvanising @80 gms per sqm) i.e. 50 mm long, 8mm outer diameter M-8 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L shape level adjuster of size 85x25x2 mm, galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center distance and 40 mm long dry wall wood screws. The work shall be carried out as per sppecifications, drawing and as per directives oof the Engineer -in-charge with semi perforated 12 mm thick micro regular edged GRG false ceiling tiles complete in all respect 15 M&L for Cement concrete type B-2, 1:2:4 (40mm graded Aggregate) 100 mm thick and finishing surface even and fair 16 M&L for coloured Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match Jhonson, Kajaria, somany 17 M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match Jhonson, Kajaria, somany 18 S&F of Vitrified Ceramic parking tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exc. 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match make of tile Jhonson, Kajaria, somany 19 Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with 1:6 cement mortar 20 M&L for Tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors of bore 15 mm 21 M&L for Tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors of bore 20 mm 22 Taking up or down steel tubing and connections, including cleaning for refixing or removal to store bore of pipe 15 mm 23 S&F of Stop valves, cast copper alloy chrome plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed bore dia 15 mm make- Jhonson, jaquar, kohler 24 S&F of Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) make jhonson, jaquar, kohler 25 S&F of PVC connections 15mm size with PTMT nuts of length 600mm 26 S&F of traps P or S type for 100 mm dia pipe 27 S&F of PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore 110 mm including steel clamps at suitable interval for holding the pipe make – supreme, finolex, astral 28 S&F of PVC (SWR) bends any Radius of bore 110 mm make – supreme, finolex, astral 29 Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 100 mm bore pipe 30 S&F of 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers 31 S&F Soap dish, vitreous China white, approximate size 160x 160x90mm 32 S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long 33 Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles 34 Demolition of cement concreteof any description andin anypositionnot otherwise specifically provided for 35 S&F of Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with proper sized channels and C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-In-charge. 36 Material & Labour for providing and fixing stainless steel (Grade 304) in railings or framework made of hollow tubes, channels, plates etc., including welding, grinding, buffing, mirror polishing and making curvature (as required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement for glass toppings etc complete in all respect. Test report of the stainless steel has to be submitted before starting the work. 37 Rendering 15mm thickin CM1:6on fair faces of brick work or concrete surfaces with smooth finish without using extra cement. 38 Preparing surfaces plastered or unplastered old surfaces on wallsand distempering walls with distemper oil emulsion two coats 39 Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces make Apex ultima, Berger weather coat, dulux weather shield 40 S&F of Toughened frosted glass as in hinged doors, partitions, , porchs, automatic doors and similar work including cutting to shape, drilling holes as required, sealing the joints to make them waterproof with the thickness of glass 12 mm 41 S&F of Chromeplated Bib taps, cast copper alloy fancy type and chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and Fixed 15 mm bore make jhonson, jaquar, kohler 42 S&F of Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. Make- hindwware, jhonson, jaquar, kohler 43 S&F of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Make- hindwware, jhonson, jaquar, kohler 44 Removing building materials etc. to a distance up to 500 meters or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination. 45 S&F of half stall Urinal withAuto electric urinal flusher with built in Self flush infra-red sensor, Working water pressure- 0.05 MPa- 0.70 Mpa, Sensing range- 35 cm to 65 cm, Power- AC 220 Volt, 50 Hz, Dia of inlet/outlet pipe- 15 mm (1⁄2”), DPF at Pressure- 1 bar- 0.22 L, 2 bar -0.33 l, 3 bar- 0.40 L, Finish: Chrome plated, Suitable for wall or recessed mounting, Flexible supply hose of proper pressure rating if required, power input box, Powered by DC or AC, power adapter, necessary cutting and finishing of wall surface, as required for fixing of urinal flusher and any requirement of spool pipe, thread cutting, socket if required including al other accessories complete in all respect. Make Hindware, EURONICS, JAQUAR, KOHLER 46 Providing, fitting & fixing 12mm thick Toughened glass full height Telescopic sliding door automatic sensor motor with motion sensor, presence sensor, locking system and batterypack for approximately opening of 2.5 mtr widthand 2.7 mtr height . Full system and arrows pointing inward towards the preferred entry, and combination of stainless steel patch fittings, soft nose seal 12mm, along with 12mm thick Toughened glass full height Fixed Partitioning system combination of stainless steel fitting like Wall to glass clamping patch , Top, Bottom & Side patch fittings. The Automatic Sensor door should also have the provision of manual operation. The work also includes, cost of Supply of MS C Channel, Hollow Pipe, Plate, Fastener with accessories and fixing. The rate shall include labour, loading, transportation, other incidental charges, toughened glass etc., complete as per direction of Engineer in Charge. Material and fittings brand shall be of Avians, Ozone, Hafele, Dorma 47 S&F of Wall paneling on interior vertical and horizontal surfaces with 5 mm thick hollow double skin PVC panels light wooden texture / grey texture made from High-grade Polyvinyl Chloride (PVC). double-skin design, heavy duty, Smooth, non-porous surface finish, moisture resistant, impact resistant,complete in all respect including all cutting and wastage with provision of making openings/cut outs for switches, sockets etc. making arrangements for sealing the corners and ends with proper PVC angles or channels as required, and all other necessary works as directed by EIC. 48 Providing and fixing of Hand Dryers as per manufactures specification with all necessary fitting and fasteners etc. complete for operational condition to hold in position &orientation complete all, note: The Body Material Should be of Stainless Steel 304. Power 1150W to 1800W, RPM 20000, to 25000, blowing volume > 270 cum per hour, air speed 100 m/sec with inbuilt auto cutoff of 60 seconds complete in all respect including making electrical connections from existing points. Make; EURONICS, JAQUAR, KOHLER. 49 Providing and fixing of automatic soap dispensers screwed to wall with raw plugs and screws etc., complete in all respect for operational condition with Automatic Infra-Red Sensor, container Material of soap dispenser should be of 304 Stainless Steel withminimum capacity of 0.8 to 1.1 litre. including making electrical connections from existing points. Make- EURONICS, JAQUAR, KOHLER 50 Supply and fixing of Chromium Plated (CP) Automatic Sensor pillar Tap for wash basins with Infra-Red sensor system with 9 to 20 cm sensing range , electrically 230 volt ac or DC operated compete set for 15 mm nominal bore (having foam flow technology) with all associated material and work for complete fitting on slab for counter top wash basin make EURONICS, JAQUAR, KOHLER 51 Providing and fixing in position Chinaware European type one-piece white water closet with P trap or S trap as required with Rimless bowl design, flushing with Siphonic effect, Dual flushing system for 2.6/4.6 LPF, Anti germ glaze, seat cover, fixing in floor complete in all respect with all required accessories including PVC connection and chrome plated health Faucet with 1 Mtr Flexible Tube with Wall Hook complete in all respects. Make: Jaquar, Kohler, Hindware 52 Supply and fixing of aluminium composite panel consisting of two layers of aluminium skins sandwiched and laminated thermoplastic core on exterior walls, sunshades etc. over aluminium pipe grid. The panels should be supplied with thickness 3 mm. Surface coating of polyester and colour as directed by engineer in charge fixed in flat or curved shape as directed over the 25x25 mm aluminium hollow pipe grid with required spacing and sufficient strength with screws in such a way that the minimum size gap is produced in the joints and the screws are concealed and not visible. Frame will be fixed on sunshades with the use of fastener bolts or screws with rawl plugs as required. The joints and screw holes if any on the exposed surface should be sealed properly with silicon based filler, transparent or of approved colour so as to give smooth, flush and joint free look. Necessary openings shall be provided wherever required including making groove in wall to insert the ACP sheet with making good with cement mortar 1:3. The panels shall be provided in single length and the joints shall be provided only wherever found necessary as directed by engineer in charge. All the cutting and wastage shall be born by the contractor. Make of the aluminum composite panel- Alex panels, Alstone, Alutech, Reynobond. 53 S&F of Vitreous China counter top basin white with over flow cap and anti germ glazing of size 600X400x185 mm,oval shape including fixing in stone slab and making connections of the inlet and outlet with complete accessories as required for making it functional. make- hindwware, jhonson, jaquar, kohler
