|
| 1 | Schedule A - Modular Kitchen1. Supplying and fixing semi modular kitchenarrangements such as Bottom Cabinets, wall box cabinees, Cupboard shutters, loft shutter, Magiccorner etc.,made of Prelam Hydrogaurd Plus- High Density Fiber with accessories at Ramanujam Quarters 3 including all materials, labour, tools , accessories, fuel etc., complete as per drawing and as described in Part II -C of sec4.Note: 1. The term \"UNIT\" shall be taken as one individual residentailhouse2.Payment will be made for each unit on completion of all works as Specified |
| 2 | 2.Supplying and fixing semi modular kitchenarrangements such as Bottom Cabinets, wall box cabinees, Cupboard shutters, loft shutter, Magiccorner etc.,made of Prelam Hydrogaurd Plus- High Density Fiber with accessories at Ramanujam Quarters 1 including all materials, labour, tools , accessories, fuel etc., complete as per drawing and as described in Part II -C of sec4.Note: 1. The term \"Unit\"shallbetakenasoneindividualresidentialhouse.2. Payment will be made for each unit on completion of all works as specified |
| 3 | Schedule B- Civil maintenance3. Providing double scaffolding arrangements for attending repair /improvement works by using steel pipes of required diameter or by Casuarina poles, including providing necessary Horizontal and vertical members, tie members, bracings etc., all round and platforms at various level adquate strength including removing the scaffolding with platform after completion of repair/improvement works all as per relevant specification and all as directed at site including all labour, materials, tools, equipments, coir, transport, fuel, etc., complete. Note:1) Scaffolding will be measured only one time for entire repair /improvements (length x height.) 2)75% of the payment may be released after erecting of scaffolding in all respects.3)25% of the balance payment will be released only after completion of repair/improvement works and removal ofscaffolding.4) If casuarina poles used for scaffolding, the bottom and top dia ofcasuarina poles are of 100mm and 50mm respectively |
| 4 | 4. Cutting and removing the Fallen/Dead/unwanted trees of the girthBeyond 30cm girth upto and including 60cm girth, tree branches on the compound wall/building or wherever required and as directed at site by using cutting machine/ manual into different cut pieces for easy handling, removing the all cut pieces and leaves etc., without damaging the near by strtucture and including collecting, transporting and dumping the same wherever required all as directed at site of work including all labour, tools, tackles, equipments, fuel, transport, scaffolding, etc. Complete.Note : For payment purpose the actual number of trees will be taken intoaccount irrespective of its branches. |
| 5 | 5. Dismantling and removing the existing damaged GI/PVC rainwater /sewer pipe above Ground Level without damaging the nearby structures, wherever required and transporting and handing over the serviceable materials to the departmental stores/RSO yard and stacking the debris if any within a lead of 50m for disposal all as per relevant specification and as directed at site including all labour, scaffolding, tools, equipments, transport, fuel etc.,complete |
| 6 | 6.)Dismantling and removing the existing damaged cement /tiled /mosaicflooring/ plasteringincluding Cement Mortar from the floor to the required thick wherever necessary without damaging the nearby structures, including collecting and bringing the debris to the ground level and depositing within a lead of 50m for transportation and disposal, all as per relevant specification and as directedat sitte, including all labour, scaffolding, tools,equipment, transport, fuel, etc., complete |
| 7 | 7. Dismantling and removing the IWC/ EWC with flushing tankwith all its accessories and conveying and handing over the serviceable materials if any, to the department stores and bringing down the debris to the ground level and depositing with in a lead of 50mts for disposal, all as directed at site of work including all labour, tools, equipments, transport, fuel, etc., complete. |
| 8 | 8. Dismantling and removing the existing damaged urinals with flushing tank & allaccessories, without damaging the nearby structures, conveying and handingover the serviceable materials if any, to the department stores and bringing the debris to the ground level and depositing with in a lead of 50mts for disposal,all as directed at site including all labour, tools, equipments, transport, fuel,etc., complete |
| 9 | 9. Dsmantling and removing the existing damaged wash hand basin withallaccessories without damaging the nearby structure, conveying and handingover the serviceable materials, if any, to the department stores and bringingthe debris to the ground level and depositing with in a lead of 50mts fordisposal, all as directed at site including all labour, tools, equipments,scaffolding, transport, fuel, etc., complete. |
| 10 | 10.Dismantling and removing the existing damaged tile dadoing/plastering in cement mortar from the wall to the required thick and wherever required without damaging the nearby structure , including collecting and bringing the debris to the ground level and depositing within a lead of 50m for disposal, all as per relevant specification and as directed site , including all labour, tools,equipments, transport, fuel, etc., complete |
| 11 | 11. Dismantling and removing the existing damaged brickwork in Cement Mortar to therequired height wherever required without damaging thenearby structures includingcollecting and bringing debris to ground level and depositing the debris within a lead of50m for disposal all as per relevantspecification and all as directed at site including all labour, tools, tackles, scaffolding, equipments, plants, transport, fuel etc.,complete. |
| 12 | 12. Dismantling/cutting the existing RCC members including stacking the steel without disturbing near by structure and conveying and handing over the serviceable materials, if any, to the department stores and wherever required including collecting and depositing the Debris in Ground level with in a lead of 50m for disposal all as specified and as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete |
| 13 | 13. Dismantling and Removing the existing damaged MS grills/ MS grill gateincluding cutting the masonry / concrete wherever required without damaging the structures nearby, transporting and handing over to the departmental stores / RSO yard within a lead of 3km all as directedincluding all labour, tools, equipments, transport, fuel, etc., complete. |
| 14 | 14.Dismantling and Removing the existing damaged Aluminum windows with all accessoriesincluding cutting the masonry / concrete wherever required without damaging the structures nearby, transporting and handing over to the departmental stores / RSO yard within a lead of 3km all as directedincluding all labour, tools, equipments, transport, fuel, etc., complete. |
| 15 | 15. Earth work excavation up to 1.50 m depth by Manually /Mechanically inordinary soil, sand, clay mixed with roots, boulders, debris, rubbish etc. asexisting at site of work for leveling course for laying of waste water lines, toiletfloor repair works wherever required including dressing of sides, ramming ofbottom etc., and depositing the excavated earth within a lead of 50 metres fordisposal, all as directed at site of work, including all labour, tools, equipment,etc. complete |
| 16 | 16. Providing Brick work with common burnt clay (non modular) bricks of classdesignation 7.5 in superstructure above plinth level up to floor V level in CM1:5 (1 cement : 5 crushed stone sand) including making horizontal and verticalgrooves 10mm wide 12mm deep complete and wherever required all asdirected at site, including cement, all abour, materials, scafolding, tools,curing, equipments, etc., complete |
| 17 | 17. Providing Half Brick work with common burnt clay (non modular) bricks ofclass designation 7.5 in CM 1:4 (1 cement : 4 crushed stone sand)upto fifth floor level and wherever required all as directed at site, including cement, all labour, materials, scafolding, tools, curing, equipments,fuel etc., complete |
| 18 | 18.Providing brick onedge using bricks of class designation 50 in CM 1: 3 (1 cement : 3 Crushed stone sand)usingforkitchen platform below supporting wall at all blocks up to fifth floor level and wherever required all as per the details specified in the relevant schedule and as directed at site of work including curing, cement, all materials, labour, tools, equipments, transport, fuel, etc., complete |
| 19 | 19.Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink asper IS:13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making goodthe walls wherever required : Kitchen sink with drain board 510x1040mm bowl depth 250 m ( NERALI OR MOTI MAKE) in kitchen in soundworking condition including testing etc., all as directed including alllabour,materials,tools,etc,complete |
| 20 | 20.Providing and laying vitrified floor tiles in sizes of 600mm x 600mm with good quality (Double charge or equivalent) (thickness to be specified by the manufacturer) or of nearest approved size and colour match with existing with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 crushed stone sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments including all materials, labour, brushes, tools,equipment, plants, transport, fuel, etc., complete. |
| 21 | 21.Supplying, fabricating and placing in positionHYSD (Fe 415/500 grade) TMT steel bars as reinforcement for all RCC works wherever required, including handling, cutting, bending and tying with 1.25mm dia black annealed steel binding wire including placing, all as per relevant specification, drawings and as directed,including all materials, labour, tools, equipment, transport, fuel, etc., complete.Note:1.The rate shall be inclusive of cost of reinforcement steel, binding wire and fabrication charges etc., complete. Binding wire will not be measured for payment purpose.2.The contractor will be allowed to use Fe500 Grade TMT steel bar without claiming any extra cost. |
| 22 | 22.Providing, Casting, transporting and fixing in position of R.C.C. precastslabs of thickness 40mm thick or morefor kitchenand wherever requiredin mix 1:1.5:3 (1 cement : 1.5 crushed stone.sand : 3 hard granite stone graded aggregate 20mm nominal size) in volumetric proportion including shuttering, mixing, transporting, placing, consolidating, curing ,etc.,including finishing the exposed surfaces with a floating coat of neat cementpunning and all as directed at site including lifting, handling, tranportingplacing and fixing in correct position including cement, and all other materials,labour, tools, plants, fuel, equipments etc., complete.Note: Supplying and fabrication of steel reinforcement will be measuredand paid separately under the relevant item. |
| 23 | 23. Providing and fixing one side Pre-polished Granite slab. all colourblack, Cherry/Ruby red of 18mm nominal thick, over kitchenplatform with CM 1;3 (1cement : 3 crushed stone sand) 20mm thickfixed with cement slurry and joints neatly pointed with cement slurryincluding nosing to the exposed edges of the granite slab to therequired finsih, curing including all materials, labour, plants, tools,equipment, machinery, fuel etc., complete. |
| 24 | 24. Providing edge moulding to 18 mm thick Granite stone counters,Vanities etc., including machine polishing to edge to give high glossfinish nosing to the exposed edges of the granite slab to the requiredfinsih, including all materials, labour, plants, tools, equipment,machinery, fuel etc., complete. |
| 25 | 25. Providing and fixing in position of PVC Nahani trap (floor trap)100mm dia, including all materials, labour, plants, tools, equipment,machinery, fuel etc., complete. |
| 26 | 26. Providing and laying plain cement concrete of mix 1:4:8 (1 Cement: 4crushed stone sand : 8 hard granite graded stone aggregate of 40 mm nominal size) in volumetric proportions for flooring/ patch work to a required thickness and wherever required all as per relevant specification and as directed at site including shuttering, mixing, transporting, vibrating, placing, ramming, consolidating, curing etc., including all materials, cement, labour, tools, plants, equipments, etc., complete |
| 27 | 27. Preparing the surfaces of flooringetc., and plastering in cement mortar 1:3 (1cement : 3 crushed stone sand) 20 mm thickfinished with a floating coat of neat cementall as directed at site of work including alllabour, materials , tools, equipments etc. complete. |
| 28 | 28. Preparing the surfaces of existing walls and plastering in cement mortar 1:5(1cement : 5 crushed stone sand), 12mm thick wherever required to the required finish, curing etc., all as directed at site including cement, all materials, labour, tools, equipments, scaffolding etc., complete |
| 29 | 29. Preparing the surfaces of ceiling etc., and plastering in cementmortar 1:3 (1cement : 3 crushed stone sand) 12 mm thick to therequired finish curing etc., all as directed at site of work including alllabour, materials, cement, tools, equipments, scaffolding,etc. complete. |
| 30 | 30. Providing flooring with good quality Anti skid ceramic tiles of size 300mm x 300mm or nearest size of 1st quality conforming to IS : 15622, of approved make as available in the market of approved colour, set in cement mortar 1:4 (1 cement : 4 crushed stone sand),20mm average thick, with required slope and fixed with neat cement slurry and joints neatly pointed with white cement added with pigment to match the colour of the tiles, curing, all as directed at site of work including cement and other materials, labour, tools, equipments,etc., complete. |
| 31 | 31. Providing wall dadoing with first quality ceramic glazedtiles (Plain) of size 300X450mm or nearest size conforming to IS: 15622 or as available in the market and approved colour and shade set in cement mortar 1:3 (1cement: 3 ccrushed stone sand) 12mm thick and joints neatly pointed with white cement added with pigment to match the colour of the tiles, curing all as directed at site of work including cement and all other materials, labour, tools, equpiments, etc., complete. |
| 32 | 32. Supplying and fixing UPVC (Un- Plasticide polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 70mm or as per available in market and both profiles reinforced with GI/ 1mm 123GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. THe EDPM rubber( black colour) covered with over all the edges of frame and shutters, the shutter willbe provided with Espag multipower point locks and it also operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed /plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, securtiy protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. All as per IS 17953-2023 and as directed and as approved by Engineer in charge including all materials, labours, tools, equipments, scaffolding etc. Complete. |
| 33 | 33. supplying, fabricating and fixing of various Structural steel members tothe required size or as directed by engineer incharge for fabrication ofGate/window grill and other repair works including dismantling the exsiting olddamaged grills and other members wherever required including all labour,materials, tools, brushes, tackles, equipments, scaffolding etc., complete. |
| 34 | 34. Providing and fixing European type water closetwhite /colour (Vormora brand or Equivalent) with \"P\" or \"S\" trap (to suit the site condition) of approved make and quality with white/colour(slim line or equivalent) low level flushing cistern of 10 liters capacity with PVC flush pipe, Anti microbial solid seat cover, fixing with T.W. plugs, etc., all in sound working condition, as directed at site of work including all materials, labour, tools, equipments, etc., complete. |
| 35 | 35. Providing and fixing good quality white Indian type Water Closet (Orissa pattern) (Parryware or Hindware) glazed white vitreous china of size 580mm x 440mm (overall) or nearest size as available in the market with necessary \"P\" or \"S\" trap fixed in 150mm thick brick jelly cement concrete backing of mix CC 1:5:10 (1 cement: 5 crushed stone sand: 10 brick jelly 40mm nominal size) in volumetric proportion, curing and making good thedisturbedportions, including providing 10 litres capacity PVC low level flushing cistern of Slim line or equivalent with all fittings and fixtures, etc., all as directed at site of work including cement and other materials, labour, tools, equipments, etc., complete |
| 36 | 36.. Providing and fixing wash hand basin (white) of size 550mm x 400mm or nearest sizeas available in the market ( Parryware or Hindware or equivalent) with single 15 mm C.P brass pillar tap, 15 mm dia PVC inlet connection,suitable for fixing the wash hand basin including painting the brackets with two coats of synthetic enamel paintover a coat of primer and fixing the brackets with teak woodplugs and making good the disturbed portions, etc., all as directed at site of work including cost of all materials cement, labour, tools, equipments, etc., complete. |
| 37 | 37.. Providing and fixing good quality white vitreous flat back lipped in front urinal basin (Parry ware or Hind ware) 430x260x350mm size or nearest size available in market fixing to wooden plug with brass screws including all fittings of approved brand &pattern and unions, PVC waste fittings of 32mm dia, all as directed at site of work including cement and all labour, materials, tools, equipments etc., complete. |
| 38 | 38.Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes(Finolex /Truebore / Varun or equivalent) having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing for external workin the wall/floor with all required accessories like tees, bends, couplings, elbows, reducers, unions, etc., and T.W plugs, clamps, including punching the masonry/ concrete wherever required and making good the disturbed portions, joining the pipes, all as directed at site of work, including cement and other materials, labour, tools, equipments, scaffolding etc., includingjointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.complete.38 (a). 20mm dia |
| 39 | 38 (b). 25mm dia |
| 40 | 39.. Supplying and fixing CP brass ofapproved brand fittings in bath rooms, toilets, etc,including fixing to water pipe lines, making water tight joint, etc., including C.P. wall flanges, testing the valves and joints etc., all as specified and as directed including all materials, labour, tools, equipments, etc., complete.39 (a ). 600mm long towel rail |
| 41 | 39 (b). Health Faucet |
| 42 | 39 (c). Pillar cock 15mm dia |
| 43 | 39(d). Stop cock 15mm dia (concealed) |
| 44 | 39 (e). Shower arm with flange 12\" length |
| 45 | 39(f). Shower rose |
| 46 | 39( g). Angle valve 15mm dia |
| 47 | 39(h). Long body bib cock 15mm dia |
| 48 | 39(i).C P Waste coupling 32 mm dia |
| 49 | 39(j). Kitchen sink tap with fittings |
| 50 | 40.Providing and fixing on wall face PVC bevelled edge mirror of good quality glass of size 600x450mm with plywood back of approved quality all as directed at site of work all labour, materials, tools, equipments etc., complete |
| 51 | 41. Supplying and fixing sanitary fittings (Paryware or equivalent) to theEWC/IWC as available in sound working condition including testing etc., all as directed at site of work including all materials, labour, tools, equipments, etc., complete.41(a). PVC Flushing tank 10 litres capacity (white colour) |
| 52 | 41(b). PVC Flushing tank 10 litres capacity ( colour) |
| 53 | 41 (c). Providing and fixing good quality Seat cover (white) (PARRYWARE – orHINDWARE) (to suit the site condition) of approved make and quality for European type water closet with white (slim line or equivalent) Anti microbial solid seat cover, fixing with necessary hinges, etc., all in sound working condition, as directed including all materials, labour, tools, equipments, etc., complete |
| 54 | 41(d). EWC seat cover( colour) |
| 55 | 41( e) 40mm dia PVC waste pipe (flexible/rigid) for kitchen sink/wash basin |
| 56 | 42 . Supplying and fixing anodised aluminium fittings with confirming toBureau of Indian Standard specification (Minimum anodise coating of AC 10 grade) in doors/windows etc., with necessary screws, etc.,all as directed atsite of work including all materials, labour, tools, equipments, etc. complete42 (a). Aluminium Butt Hinges - 100mm |
| 57 | 42 (b).Aluminium Butt Hinges - 150 mm |
| 58 | 42 (c ).Aluminium towerbolt - 150mm |
| 59 | 42 (d).D type Handle - 150 mm long |
| 60 | 42 (e ). D type Handle - 75 mm long |
| 61 | 42 (f). Aldrop 250 mm long |
| 62 | 43. Supplying and fixing 5mm nominal thick plain glass(saint gobain (or) Modiguard make) for glazing in window shutters including removing of damaged glasses from the existing window shutters and fixing with necessary accessories like wooden / rubber beading, screw etc., all as directed at site of work including all materials, labour, tools, scaffolding, equipment, transport, fuel etc.,complete.Note:1.The actual area of glass used alone will be measured for payment purpose.2.The rate shall including the cost of rubber beading etc., |
| 63 | 44. Preparing the surfaces of ceiling surface and applying one coats ofpremium Acrylic emulsion paint (Asian or equivalent) of approved brand and colour to give an even shade all as directed at site of work including alllabour, materials, tools, tackles, equipments, brushes, scaffolding, etc.,complete |
| 64 | 45.Scrapping , cleaning thoroughly the existing wall surfaces to the requiredthick wherever necessary without damaging the wall and making suitable for paintingincluding collecting and bringing the debris to theground level and depositing within a lead of 50m for disposal, all as per relevant specification and as directed at site ,including all labour, tools,equipments, transport, fuel, etc., complete. |
| 65 | 46.Providing and applying white cement based putty of average thickness 1 mm, of approved brand (Birla or Equivalent)and manufacturer, over the new /old plastered wall surface to prepare the surface even and smooth all as directed at site of work including all materials, labour, scaffoldings, brushes, tools, equipments, etc.,complete. |
| 66 | 47. Preparing the existing inner wall surfaces and applying one coat coat ofpremium Acrylic emulsion primer paint (Asian or equivalent) of approved colour and shade to give an even shade, finish all as per specification and as directed at site of work including all labour, materials, scaffolding, brushes, etc., complete. |
| 67 | 48.Preparing the existing inner wall surfaces and applying two coats of premium Acrylic emulsion paint (Asian or equivalent) of approved colour and shade to give an even shade, finish all as per specification and as directed at site of work including all labour, materials, scaffolding, brushes, etc., complete. |
| 68 | 49. Preparing the surfaces of outer walls and applying two coats of premiumacrylic emulsion paint (asian or equivalent) and UV resistance, Alkali & fungalresistance, dirt resistance exterior paint over one coat of exterior primer for old/new wall surfaces to give an even shade all as directed at site of work wherever required including all labour, materials, tools, brushes, tackles, equipments, scaffolding etc., complete |
| 69 | 50.Preparing the surfaces of existing wooden members and painting with two coats of synthetic enamel paint (Asian or equivalent) to give an even shade, allas directed at site of work including all materials, labour, scaffoldings,brushes,tools, equipments, etc.,complete. Note: 1. Necessary painting coefficient shall be allowed as per ChPA engineering manual.2. The above quantity is inclusive of painting co-efficient. |
| 70 | 51. Preparing the surfaces of old steel members and painting with two coats ofsynthetic enamel paint (asian or equivalent) of approved quality to give aneven shade, all as directed at site of work including all materials, labour,scaffoldings, brushes, tools, equipments, etc., complete.Note:1. Necessary painting co-efficient shall be allowed as per ChPA engineering manual.2. The above quantity is inclusive of painting co-efficient. |
| 71 | 52. Preparing the surfaces of new steel members and painting with twocoats of synthetic enamel paint colour (asian or equivalent) over one coat of primer of approved quality to give an even shade, all as directed at site of work including all materials, labour, scaffoldings, brushes, tools, equipments, etc., complete. Note: 1. Necessary painting co-efficient shall be allowed as per ChPAengineering manual.2. The above quantity is inclusive of painting co-efficient |
| 72 | 53.. Preparing the surfaces of wooden members and applying with two coats of Varnishing of approved quality over a coat of flatting varnish to give an even shade, all as directed including all materials, labour, scaffoldings, brushes, tools, equipments, etc., complete. Note:1.Necessary painting co-efficient shall be allowed as per Ch.P.A. engineering manual.2. The above quantity is inclusive of painting co-efficient |
| 73 | 54.Polishing the existing mosaic tiled flooring/skirting by thoroughlyscrubbing and stripping using TASKI stripper R-20 solution or similarchemical with scrubbing pad, until old wax, grease and muddy layers on the floors are stripped off completely and the floor is rinsed thoroughly with water by TASKI ergo disc machine and soft pad, including sucking the soiled solutionwith TASKI vacumat, allowing the floor to dry completely and applying twocoats of TASKI Plaza Plus or similar chemical evenly with an applicator toolonto the floor and applying two coats of undiluted TASKI Complete or similarchemical evenly with an applicator tool and finishing the joints neat, all asdirected at site of work including all labour, materials, tools, equipments,chemicals, transport, fuel, etc., complete.54 (a)Providing mosaic floor polishing with wax finishing |
| 74 | 54 (b ) Providing mosaic Skirting polishing with wax finishing |
| 75 | 55. Providing, fixing and laying of PVC pipes of 75mm &110mm outside diameters 6 Kgf/sq.cm pressure of approved quality (Finolex (or) Trubore (or) Varun (or) Supreme) for sewage water lines including necessary bends, clamps and specials, etc., wherever required, including joining the pipes using necessary adhesives, and making connections to floor traps, gully traps manholes etc., including cutting the floor concrete masonry and making good the disturbed portions all as directed at site of work including all materials, labour, tools, equipments, scaffolding, cement etc., complete.premium Acrylic emulsion paint (Asian or equivalent) of approved colour and shade to give an even shade, finish all as per specification and as directed at site of work including all labour, materials, scaffolding, brushes, etc., complete.55 (a).. 75mm dia |
| 76 | 55 (b).. 110mm dia |
| 77 | 56. Providing, fixing and laying of PVC pipes of 110mm outside diameters 6 Kgf/sq.cm pressure of approved quality (Finolex (or) Trubore (or) Varun (or) Supreme) for rain water/ waste watewr lines including necessary bends, clamps and specials, etc., wherever required, including joining the pipes using necessary adhesives, and making connections to floor traps, gully traps manholes etc., including cutting the floor concrete masonry and making good the disturbed portions all as directed at site of work including all materials, labour, tools, equipments, scaffolding, cement etc., complete. |
| 78 | 57. Collecting, loading, transporting and levelling the Surplus earth/ Debrisand any other unwanted materials from the road sides and yards in different location in Harbour area, dumping the same in the low lying areas ofthe port premises with in lead of 3Kms and levelling the unloaded materials, etc., all as directed at site of work includingall labour, tools, plants, equipments, fuel, etc. complete.57 (a).Surplus earthNote: 1. The tenderer shall maintain trip sheets in triplicate in Port’s approved format at his own cost. for the quantity of earth transported.2. Payment will be based on the lorry cubical contents after deduction of 20% for voids. However, the final quantity will be restricted to actual earth work quantity |
| 79 | 57 (b). Debris1. The tenderer shall maintain trip sheets in triplicate in Port\"s approved format at his own cost.2. Payment will be based on the lorry cubical content. No deduction ofvoids for debris will be made |
