Tender For Compound Wall Of Adarsh Vatika Park Repair Work Of Park Gate Railing For Varaddhajan Water Motor Light And Colour Work In Mukta Prasad Sector 14 Mla Lad Bikaner West; 1. Excavation of earth in foundation, trenches, and drains up to a depth of 1.5 meters, compacting the bottom, watering, dressing the sides, removing excavated earth, refilling the empty spaces with earth after filling the foundation, and disposing of the remaining earth up to a distance of 50 meters in ordinary/soft soil. 2. Stone aggregate (crusher broken) - If hand-broken ballast is used instead of 40 mm crusher broken stone aggregate, the same quantity will be payable, but a 30 percent deduction will be made in the rate of the aggregate. 3. Foundation and plinth masonry with first-class bricks in cement-sand 1:6 or 1:8 mortar, including closing of side joints and curing. Cement mortar 1:6 4. Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meters and with all lift. 5. Superstructure masonry work with first-class bricks in cement-sand 1:6 mortar, including closing of side joints and curing. Superstructure masonry work up to a height of 4.5 meters from plinth level. 6. Cutting and erecting and fixing iron girders up to a height of 4.5 meters. Note: - Analysis for 6 meter length and size 300 x 150 mm. (37.7 kg per meter) 7. Cement plaster on wall in 1:6 ratio of cement-sand mix, including raking out joints and regular curing for 14 days. 20 mm 8. Providing and laying in position cement concrete including curing, compaction etc. of specified grade excluding the cost of centering and shuttering - All up to plinth level M15 grade Nominal Mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size). 9. Laying and polishing of Kota stone flooring and skirting over 1:4 cement mortar base of 20mm thickness, including grinding (minimum 3 times) and filling the joints with cement slurry, etc. 901 to 2300 sq cm 10. Providing and applying white cement-based putty over plastered surface to prepare the surface even and smooth complete New Plastered Surface (three or more coats) 11. Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work including preparation of base with primer, putty, and filler, complete in all respects. 12. Cutting, bending, placing, and tying of reinforcement steel for RCC work, including supply. 13. Providing and laying cement concrete 1:2:4/1:1.5:3 mix in reinforced cement concrete, including placing, compacting, curing and leveling the surface with 1:3 cement mortar in roof slabs, cantilevers, beams, lintels, etc., including scaffolding, but excluding the cost of steel and shuttering. Ratio 1:1.5:3 14. Providing and fixing centering/shuttering (planking and formwork) for RCC roof, slab, cantilevers, lintels, etc., up to a height of 4.5 meters and removing the same, etc., as per specifications. Shuttering Steel 15. Laying first-class stone slab roofing, filling the joints from above and below with stone chips and cement mortar in 1:4 ratio. 16. Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formaldehyde resin in glue on both sides with approved steel fittings complete as per annexure A: 35 mm thick. Commercial Veneer both sides. 17. Providing and fixing steel glazed doors, windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitered and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with copper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approved steel primer, excluding the cost of metal beading and other fittings except necessary hinges or pivots, steel handles, peg stay, etc. as required: Windows fixed 18. Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. 19 Providing and fixing Square bars or other flat welded to window, ventilators etc. 20 Providing & laying broken glazed tiles on roof (broken glazed tiles not less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg of VG-40 (30/40) grade and 0.30 Kg/Sqm. of VG-10 (80/100) grade) and joints filled with cement mortar 1:2 (1 cement:2 marble dust mixed with waterproofing compound) all complete as per direction of Engineer-in-charge. 21 Iron work in grills/gates etc. including cutting, fitting and fixing of flat angles, tees and channel sections. 22 Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete.(upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required. Please Enable Macros to View BoQ information
