Tender For Interior Furnishing Works For Pnb Sanghera Branch Branch Manager 66 X 30 X 26: 1.00 Nos. Providing in position manager table as per the drawings made out of 19mm thick IS 303 MR grade plywood of approved make for top sides & Front Apron. Table Top & sides exposed surfaces to be finished with 1 mm laminate of approved make & shade and internal surfaces finished with 3 coats of enamel paint. table to be provided with a metal Keyboard tray. The edges to be finished with PVC Edge Banding tape. Table to be provided with three unit Drawer made out of 12mm thick IS 303 MR grade plywood of approved make with necessary lock, drawer channel & other hardware of approved make, drawer to be externally finished with 1.0mm thk. laminate of approved make & shade and internal surfaces finished with 3 coats of enamel paint of approved shade and complete as per drawing and as directed by Bank or its Architect. The rates shall be inclusive of footrest of size 24x18 and height 4, made of 19 mm thick board of approved make. The foot-board shall have a slope of 2 with height varying from 2 to 4. Lipping (1 x 6 mm) shall be provided on all the visible edges of the board. The footrest shall be duly enameled painted complete in respects. The rates shall be inclusive of C.P.U. Shelf 12 x 18 & 4 heigh as per design. The rates shall be inclusive of designs/ levels in front porton of tables. 2 Officer Table 50 X 26 X 26: 4.00 Nos. Providing in position officer table as per the drawings made out of 19mm thick IS 303 MR grade plywood of approved make for top sides & Front Apron. Table Top & sides exposed surfaces to be finished with 1 mm laminate of approved make & shade and internal surfaces finished with 3 coats of enamel paint. table to be provided with a metal Keyboard tray. The edges to be finished with PVC Edge Banding tape. Table to be provided with three unit Drawer made out of 12mm thick IS 303 MR grade plywood of approved make with necessary lock, drawer channel & other hardware of approved make, drawer to be externally finished with 1.0mm thk. laminate of approved make & shade and internal surfaces finished with 3 coats of enamel paint of approved shade and complete as per drawing and as directed by Bank or its Architect. The rates shall be inclusive of footrest of size 24x18 and height 4, made of 19 mm thick board of approved make. The foot-board shall have a slope of 2 with height varying from 2 to 4. Lipping (1 x 6 mm) shall be provided on all the visible edges of the board. The footrest shall be duly enameled painted complete in respects. The rates shall be inclusive of C.P.U. Shelf 12 x 18 & 4 heigh as per design. The rates shall be inclusive of designs/ levels in front porton Table 49 X 26 X 26: 1.00 Nos. Providing in position table as per the drawings made out of 19mm thick IS 303 MR grade plywood of approved make for top sides & Front Apron. Table Top & sides exposed surfaces to be finished with 1 mm laminate of approved make & shade and internal surfaces finished with 3 coats of enamel paint. table to be provided with a metal Keyboard tray. The edges to be finished with PVC Edge Banding tape. Table to be provided with three unit Drawer made out of 12mm thick IS 303 MR grade plywood of approved make with necessary lock, drawer channel & other hardware of approved make, drawer to be externally finished with 1.0mm thk. laminate of approved make & shade and internal surfaces finished with 3 coats of enamel paint of approved shade and complete as per drawing and as directed by Bank or its Architect. The rates shall be inclusive of footrest of size 24x18 and height 4, made of 19 mm thick board of approved make. The foot-board shall have a slope of 2 with height varying from 2 to 4. Lipping (1 x 6 mm) shall be provided on all the visible edges of the board. The footrest shall be duly enameled painted complete in respects. The rates shall be inclusive of C.P.U. Shelf 12 x 18 & 4 heigh as per design. The rates shall be inclusive of designs/ levels in front porton of tables. 4 Side table cum storage 33 X 16 X 26:- Providing in position side table cum storage as per the drawings with Top, Bottom and sides made out of 19mm IS 303 MR grade plywood of approved make. Mid level shelf & shutters made out of 12mm IS 303 MR Plywood of approved make and Back of table cum storage made of 8mm IS 303 MR grade plywood of approved make including all necessary hardware, glue etc as per approved make. External surfaces to be finished with 1mm laminate of approved make & shade and internal surfaces to be finished with 3 coats of enamel paint of approved shade . Edges of the table Cum storage to be finished with Edge banding tape. Work to be completed as per drawing and as directed by Bank or its Architect. 5 Storage 50.0 Sqft. Providing in position Low height & Full Height storage with top & sides made out of 19mm IS 303 MR grade plywood, Shelves & shutters made out of 16mm IS 303 MR grade plywood, and rear/back made of 6mm IS 303 MR Plywood all plywood to be used of approved make. Storages to be finished in 1.0mm thick laminate externally of approved make & shade and internal surfaces to be finished with approved shade of 3 coats of enamel paint , Edges to be finished with Edge banding tape complete with all hardware including handles, hinges, locks, etc. of approved make complete as per drawing and as directed by Bank or its Architect. 6 Counter for Cashiers with partitions: 1 nos. including partitions Providing in position cashier counter as per drawing with solid partition on three sides 2440 mm high. Partition made with GI frame with C Channel stud with top, bottom & end channel being 50mm thick and intermediate channels48mm thick with intermediate spacing of 600 mm centre to centre horizontally as well as vertically. Frame to be covered with 6mm IS 303 MR Grade Plywood of approved make and finished with 1.00 mm laminate of approved make & shade. Front side of the counter have solid partition upto 1370mm high and solid 8mm thick toughened glass above it till total height of 2440 mm with a cut out made for cash exchange. A customer counter top of 200 mm wide at height of 1370mm made out of 12mm thick IS 303 MR grade plywood of approved make finished with 1.0mm thick laminate of approved make & shade on outside, Cashier counter inside to be made of 19mm thick IS 303 MR grade plywood of approved make for top, sides, apron etc. The table to be finished with 1.00mm laminate of approved make & shade on outer surfaces and with approved shade of enamel paint on inner surfaces. Edges to be finished with Edge banding tape. Table to be provided with keyboard tray, CPU trolley, wire manager. Counter to be covered with aluminium jali on top. Counter to be completed with necessary hardware, glue etc. of approved make complete as per drawing and as directed by Bank or its Architect. . Door and Cash deposit drawer to be paid extra .The rates shall be inclusive of footrest of size 24x18 and height 4, made of 19 mm thick board of approved make. The footboard shall have a slope of 2 with height varying from 2 to 4. Lipping (1 x 6 mm) shall be provided on all the visible edges of the board. The footrest shall be duly enameled painted complete in respects. The rates shall be inclusive of C.P.U. Shelf 12 x 18 & 4 heigh as per design. The rates shall be inclusive of designs/ levels in front porton of tables. If the GI frame is not available wooden frame of merandi/salwood to be used. 7 Low Ht. Partition 43 Ht.: 235.00 Sqft. Providing and fixing in position low ht. partition made out of GI frame with C Channel stud with top, bottom & end channel being 50mm thick and intermediate channels 48mm thick with intermediate spacing of 600 mm centre to centre horizontally as well as vertically. Frame to be covered with 6mm IS 303 MR Grade Plywood of approved make and finished with 1.00 mm laminate of approved make & shade . The partition shall have 50 x25mm T.W. moulding on top, sides, etc. The T.W. moulding shall be melamine polished and complete with hardware, glue etc. of approved make complete as per drawing and as directed by Bank or its Architect Channel stud with top, bottom & end channel being 50mm thick and intermediate channels 48mm thick with intermediate spacing of 600 mm centre to centre horizontally as well as vertically. Partition to be providded with 5 mm Glass/ solid as per the drawings. Frame to be covered with 6mm IS 303 MR Grade Plywood of approved make and finished with 1.00 mm laminate on both sides of approved make & shade and complete with hardware, glue etc. of approved make complete as per drawing and as directed by Bank or its Architect. Framing of the partition to be erected upto Beam/slab bottom , however plywood & laminate to be pasted upto false ceiling height. Rates are inclusive of all hardware, paint, ply, laminate & other material, labour and taxes. and, measurement will be upto false ceiling height only. If the GI frame is not available wooden frame to be used. 9 Main Entrance Partition with door (12mm Toughned GLASS) 285.00 Sqft. Providing and fixing in position full ht. partition made out of GI frame with C Channel stud with top, bottom & end channel being 50mm thick and intermediate channels 48mm thick with intermediate spacing of 600 mm centre to centre horizontally. Partition have solid portion upto 3 ft and toughned glass from 3 ft upto 86 and top 6 again solid. Partition to be providded with 12 mm toughned Glass/ solid as per the drawings. Frame to be covered with 6mm IS 303 MR Grade Plywood of approved make and finished with 1.00 mm laminate on both sides of approved make & shade and complete with hardware, glue etc. of approved सामान्य प्रशासन अनुभाग, मण्डल कार्ाालर्: बठ िं डा , दूरभाष : 0164-2250414, cobtdgad@pnb.co.in PNB SANGHERA 38 | P a g e make complete as per drawing and as directed by Bank or its Architect. Framing of the partition to be erected upto Beam/slab bottom , however plywood & laminate to be pasted upto false ceiling height. Rates are inclusive of all hardware, paint, ply, laminate & other material, labour and taxes. and, measurement will be upto false ceiling height only. If the GI frame is not available wooden frame to be used. Rate shall include necessary locking systems, 1 pair of 12” long S. S. (C Shape) Handles of approved make, floor springs, and any necessary hardware items. 10 Panelling on Walls: 525.00 Sqft. Providing and fixing in position panelling made out of GI frame with C Channel stud with top, bottom & end channel being 50mm thick and intermediate channels 48mm thick with intermediate spacing of 600 mm centre to centre horizontally as well as vertically. Frame to be covered with with 6mm thick IS 303 MR grade plywood of approved make , The plywood shall be finished with 1.0mm thick laminate of approved make & shade in pattern and design in two colour as per instructions. The item shall be inclusive of necessary hardware, fevicol etc. Work to be completed as per drawing and as directed by the Bank or its Architect. 11 Soft Board: 24.00 Sqft. Providing fixing in position soft board panelling made out of 12 mm thick soft board with backing of 6 mm thick IS- 303 MR grade plywood of approved make . The soft board shall be covered with approved fabric fixed in line and level सामान्य प्रशासन अनुभाग, मण्डल कार्ाालर्: बठ िं डा , दूरभाष : 0164-2250414, cobtdgad@pnb.co.in PNB SANGHERA 39 | P a g e complete as directed by the Bank or its Architect. 12 Writing desk: 1.00 Nos. Providing fixing in position writing desk, made out of 19 mm thk. IS 303 MR grade plywood of approved make finished with 1.0 mm thk. laminate of approved make & shade, tw lipping on edge french polish etc. as per shape and 6 mm thk.vertical glass support with machine polished edges etc. complete as directed by the Bank or its Architect. 13 Acrylic Emulsion Paint: 0.00 Sqft. Providing and applying with brush, roller Acrylic Emulsion paint to walls, ceiling, etc.in two or more coats of approved paint over necessary putty work, sand papering, primer, scaffolding etc. complete. Old paint shall be removed, scraped, cleaned and coat of water resistant chemical applied where dampness / Seepage is observed as found necessary and as directed by the Bank or its Architect 14 Aluminium Partitions:- 0.00 Sqft. Providing and fixing powder coated aluminium partition including door with frame made of extruded section having thickness 16 SWG of size 4 x 1-3/4 bottom & rest 3x1-3/4. All the members of aluminium sections should be powder coated with approved colour and are to be fabricated as per approved pattern for doors / partitions fixed in position (with floor / wall / roof) with rawl plugs wooden pegs screws aluminium angles / cleats butt hinges etc. There will be four horizontal members for partitions up to ceiling level ( at 0, 2-6 7-0 and ceiling level) as per site conditions. The spacing Channel stud with top, bottom & end channel being 50mm thick and intermediate channels 48mm thick with intermediate spacing of 600 mm centre to centre horizontally as well as vertically. Partition to be providded with 5 mm Glass/ solid as per the drawings. Frame to be covered with 6mm IS 303 MR Grade Plywood of approved make and finished with 1.00 mm laminate on both sides of approved make & shade and complete with hardware, glue etc. of approved make complete as per drawing and as directed by Bank or its Architect. Framing of the partition to be erected upto Beam/slab bottom , however plywood & laminate to be pasted upto false ceiling height. Rates are inclusive of all hardware, paint, ply, laminate & other material, labour and taxes. and, measurement will be upto false ceiling height only. If the GI frame is not available wooden frame to be used. 9 Main Entrance Partition with door (12mm Toughned GLASS) 285.00 Sqft. Providing and fixing in position full ht. partition made out of GI frame with C Channel stud with top, bottom & end channel being 50mm thick and intermediate channels 48mm thick with intermediate spacing of 600 mm centre to centre horizontally. Partition have solid portion upto 3 ft and toughned glass from 3 ft upto 86 and top 6 again solid. Partition to be providded with 12 mm toughned Glass/ solid as per the drawings. Frame to be covered with 6mm IS 303 MR Grade Plywood of approved make and finished with 1.00 mm laminate on both sides of approved make & shade and complete with hardware, glue etc. of approved सामान्य प्रशासन अनुभाग, मण्डल कार्ाालर्: बठ िं डा , दूरभाष : 0164-2250414, cobtdgad@pnb.co.in PNB SANGHERA 38 | P a g e make complete as per drawing and as directed by Bank or its Architect. Framing of the partition to be erected upto Beam/slab bottom , however plywood & laminate to be pasted upto false ceiling height. Rates are inclusive of all hardware, paint, ply, laminate & other material, labour and taxes. and, measurement will be upto false ceiling height only. If the GI frame is not available wooden frame to be used. Rate shall include necessary locking systems, 1 pair of 12” long S. S. (C Shape) Handles of approved make, floor springs, and any necessary hardware items. 10 Panelling on Walls: 525.00 Sqft. Providing and fixing in position panelling made out of GI frame with C Channel stud with top, bottom & end channel being 50mm thick and intermediate channels 48mm thick with intermediate spacing of 600 mm centre to centre horizontally as well as vertically. Frame to be covered with with 6mm thick IS 303 MR grade plywood of approved make , The plywood shall be finished with 1.0mm thick laminate of approved make & shade in pattern and design in two colour as per instructions. The item shall be inclusive of necessary hardware, fevicol etc. Work to be completed as per drawing and as directed by the Bank or its Architect. 11 Soft Board: 24.00 Sqft. Providing fixing in position soft board panelling made out of 12 mm thick soft board with backing of 6 mm thick IS- 303 MR grade plywood of approved make . The soft board shall be covered with approved fabric fixed in line and level सामान्य प्रशासन अनुभाग, मण्डल कार्ाालर्: बठ िं डा , दूरभाष : 0164-2250414, cobtdgad@pnb.co.in PNB SANGHERA 39 | P a g e complete as directed by the Bank or its Architect. 12 Writing desk: 1.00 Nos. Providing fixing in position writing desk, made out of 19 mm thk. IS 303 MR grade plywood of approved make finished with 1.0 mm thk. laminate of approved make & shade, tw lipping on edge french polish etc. as per shape and 6 mm thk.vertical glass support with machine polished edges etc. complete as directed by the Bank or its Architect. 13 Acrylic Emulsion Paint: 0.00 Sqft. Providing and applying with brush, roller Acrylic Emulsion paint to walls, ceiling, etc.in two or more coats of approved paint over necessary putty work, sand papering, primer, scaffolding etc. complete. Old paint shall be removed, scraped, cleaned and coat of water resistant chemical applied where dampness / Seepage is observed as found necessary and as directed by the Bank or its Architect 14 Aluminium Partitions:- 0.00 Sqft. Providing and fixing powder coated aluminium partition including door with frame made of extruded section having thickness 16 SWG of size 4 x 1-3/4 bottom & rest 3x1-3/4. All the members of aluminium sections should be powder coated with approved colour and are to be fabricated as per approved pattern for doors / partitions fixed in position (with floor / wall / roof) with rawl plugs wooden pegs screws aluminium angles / cleats butt hinges etc. There will be four horizontal members for partitions up to ceiling level ( at 0, 2-6 7-0 and ceiling level) as per site conditions. The spacing
