|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means overareas (not exceeding 1.5 m in width or 10 sqm on plan) includingincluding disposal ofexcavated lead upto 50 mtr lift upto 1.5 mtrdisposal earth to be levelled and neatly dressed. All kinds of soil |
| 3 | Providing and laying in cement concrete of specified grade excluding the cost of centring and shuttering. All workupto plinth level. 1:5:10 cement concrete (1 cement :5 Coarse sand :10 stone agg. 40 mm size |
| 4 | Painting with synthtic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on Old work. |
| 5 | Brick work with F.P.S. bricks of class desgn 75 in foundation and plinth in: CM 1:4 (1 cement : 4 coarse sand) |
| 6 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) |
| 7 | Providing and applying wall putty of 2 mm thk over plastered surface to prepare the surface even and smooth complete. |
| 8 | Finishing walls with Acrylic smooth exterior paint of required shade: New work (three or more coats)@1.67 ltr/10 sqm over & including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 9 | Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good the walls etc.(external exp on wall work) 15mm dia nominal bore. (\"B\" class pipe) |
| 10 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 18.13.1 25 to 40 mm nominal bore |
| 11 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)18.17.1 25 mm nominal bore |
| 12 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 13 | Providing and Installation of Toilet-bath block(Size of each cubicle- 1220x915x1980- Galvano Powder coated EPS Panels 40mm thick and steel sheet thickness 0.6 mm 275 MPA for full structure), with 02nos. LED tube lights- 18 W, PVC boards, 2 nos. 6 Amp switches, and drain pipe connected to the drainage system, SS 304 wash basin with mirrors- 02 Nos,and soap disc/towel rail, Anti skid tiles finish floor, WC- Indian with SS pan, with biodigester/septic tank system and connections,Dual Flush cistern-15 ltr , traps-wherever required, Bib cocks-02 Nos, Partition wall, PVC exhaust fan 300 mm dia, PVC water tank 500 ltrs, Including all fixtures and fitting as per direction of Engineer-in-charge. |
