Procurement Of Required Machinery And Equipment For Processing Of Municipal Solid Waste In Ibrahimpatnam Municipality Under Sbm 2.0.-Weigh Bridge: Electronic Pitless Type High Tensile Structural Steel as per IS:2062:2006 Should be anti-skid type. Thickness of platform plate not less than 10 mm Size 4.8 metre and 2.8 metre (length x width) 10 Tonne 4 Load cell with Nickel plated alloy steel body 30 minute backup Laser Indicate weight Indicate calibration-Auto zero tracking Calibration to be checked automatically every 5 minutes Kg 2 Kg Digital double ended shear beam load cells, pre-calibrated load cells-5000/kg (04 No.) with mounting kits Cables: Home run cable 20 metre & inter connections cable between load cell and junction box & weighing electronics 2 m. 3 Phase (440 V 50Hz) metal Powder coating/ paint 3 Phase (440 V, 50 Hz) Powder/paint Supply , Delivery, Erection and fixing of Trommel (16-40 mm & 4-6 mm) Supply , Delivery, Erection and fixing of Mechanical Sorting Conveyor belt : i).Conveyor Belts 4 (Line below trommel for fraction > 60 mm) Type-Flat roller type belt conveyor Motor-2.25 kW (3 HP), 1440 RPM, TEFC (Totally Enclosed Fan Cooled) copper wire conforming to IS: 13730, 3-phase, 4- pole Inclination-Upto 15° inclined Length of Conveyor-Approx. 4.5 m from End to End of conveyor Size of belt-800 mm wide (working width 600 mm) Belt Specification-Plain rubber belt, 3 ply, 3 mm top, 1.5 mm bottom rubber covering, total plain belt thickness 08 mm, nylon cord conforming to M 24 grade Drive pulley for conveyor-Ø 320 mm OD with crowning surface with 60 mm shaft with rubber coating and hearing bone design Rear pulley for conveyor-Ø 320 mm OD with crowning surface with 60 mm shaft with rubber coating and hearing bone design (OR) ii)coating and neang bone design Conveyor Belts 5 (Feeder line for sorting of 250 mm down materials) Type-Flat roller type belt conveyor Motor-2.25 kW (3 HP), 1440 RPM, TEFC (Totally Enclosed Fan Cooled) copper wire conforming to IS: 13730, 3-phase, Inclination-4- pole Length of Conveyor-Upto 15° inclined Size of belt-Approx. 3.8 m from End to End of conveyor Belt Specification-1000 mm wide (working width 800 mm) Drive pulley for conveyor-Chevron rubber belt, 3 ply, 3 mm top, 1.5 mm bottom rubber covering, total chevron belt thickness 10 mm, nylon cord conforming to M 24 grade-Ø 320 mm OD with crowning surface with 60 mm shaft with rubber coating and hearing bone design Rear pulley for conveyor-Ø 320 mm OD with crowning surface with 60 mm shaft with rubber coating and hearing bone design (OR) iii).Type Conveyor Belts 6 (Outfeed line from trommel for fractions above 250 mm) Motor-Flat roller type belt conveyor, 2.25 kW (3 HP), 1440 RPM, TEFC (Totally Enclosed Fan Cooled) copper wire conforming to IS: 13730, 3-phase, 4- pole Inclination Length of Conveyor, Size of belt,Belt Specification, Drive pulley for conveyor,Rear pulley for conveyor,Type-Motor Inclination 0° Length of Conveyor Size of belt Upto 15 inclined Approx. 4.5 m from End to End of Conveyor 1000 mm wide (working width 800 mm) k Plain rubber belt, 3 ply, 3 mm top, 1.5 mm bottom rubber covering, total plain belt thickness 08 mm, nylon cord conforming to M 24 grade Ø320 mm OD with crowning surface with 60 mm shaft with rubber coating and hearing bone design Ø320 mm OD with crowning surface with 60 mm shaft with rubber coating and hearing bone design. (OR) iv) Flat roller type belt conveyor 2.25 kW (3 HP), 1440 RPM, TEFC (Totally Enclosed Fan Cooled) copper wire conforming to IS: 13730, 3-phase, 4- poleApprox. 4 m from End to End of Conveyor 1000 mm wide (working width 800 mm) ART Governo assigns express repres lin A Conveyor Belt 7 (Feeder lines for sorting of fractions above 250 mm) Belt Specification Drive pulley for conveyor Rear pulley for conveyor Type Motor Inclination 0 Length of Conveyor Size of belt Belt Specification Drive pulley for conveyor Rear pulley for conveyor Type Motor Inclination Length of Conveyor Size of belt Belt Specification Drive pulley for conveyor Rear pulley for conveyor Type Motor Inclination Length of Conveyor Size of belt Belt Specification Drive pulley for conveyor Rear pulley for conveyor Plain rubber belt, 3 ply, 3 mm top, 1.5 mm bottom rubber covering, total plain belt thickness 08 mm, nylon cord conforming to M 24 grade 320 mm OD with crowning surface with 60 mm shaft with rubber coating and hearing bone design 320 mm OD with crowning surface with 60 mm shaft with rubber coating and hearing bone design (OR) v) Conveyor Belts 8 (Sorting line for heavier fraction 250 mm-line 1) Flat roller type belt conveyor 2.25 kW (3HP), 1440 RPM, TEFC (Totally Enclosed Fan Cooled) copper wire conforming to 15: 13730, 3-phase, 4- pole Approx. 3 m from End to End of conveyor 1000 mm wide (working width 800 mm) Plain rubber belt, 3 ply, 3 mm top, 1.5 mm bottom rubber covering, total plain belt thickness 08 mm, nylon cord conforming to M 24 grade 320 mm OD with crowning surface with 60 mm shaft with rubber coating and hearing bone design 320 mm OD with crowning surface with 60 mm shaft with rubber coating and hearing bone design Conveyor Belts 9 (Sorting line for heavier fraction < 250 mm - line 1) Flat roller type belt conveyor 2.25 kW (3HP), 1440 RPM, TEFC (Totally Enclosed Fan Cooled) copper wire conforming to IS: 13730, 3-phase, 4- pole 0 Approx. 3 m from End to End of conveyor 1000 mm wide (working width 800 mm) Plain rubber belt, 3 ply, 3 mm top, 1.5 mm bottom rubber covering, total plain belt thickness 08 mm, nylon cord conforming to M 24 grade 320 mm OD with crowning surface with 60 mm shaft with rubber coating and hearing bone design 320 mm OD with crowning surface with 60 mm shaft with rubber coating and hearing bone design Conveyor Belts 10 (RDF line for fraction < 60 mm) Flat roller type belt conveyor 2.25 kW (3HP), 1440 RPM, TEFC (Totally Enclosed Fan Cooled) copper wire conforming to IS: 13730, 3 phase, 4- pole Upto 15 inclined Approx. 2.5 m from End to End of conveyor 800 mm wide (working width 600 mm) Chevron rubber belt, 3 ply, 3 mm top, 1.5 mm bottom rubber covering, total chevron belt thickness 10 mm, nylon cord conforming to M 24 grade 320 mm OD with crowning surface with 60 mm shaft with rubber coating and hearing bone design 320 mm OD with crowning surface with 60 mm shaft with rubber coating hearing bone desighn. or Conveyor Belts 11 (Sorting line for lighter fraction > 250 mm) Type-Flat roller type belt conveyor Motor-5.63 kW (7.5 HP), 1440 RPM, TEFC (Totally Enclosed Fan Cooled) copper wire conforming to IS: 13730, 3-phase, 4- pole- 0 , Inclination- Length of Conveyor, Approx. 17 m from End to End of conveyor Size of belt 1000 mm wide (working width 800 mm) Belt Specification Plain rubber belt, 3 ply, 3 mm top, 1.5 mm bottom rubber covering, total plain belt thickness 08 mm, nylon cord conforming to M 24 grade Drive pulley for conveyor 320 mm OD with crowning surface with 60 mm shaft Rear pulley for conveyor with rubber coating and hearing bone design 320 mm OD with crowning surface with 60 mm shaft with rubber coating and hearing bone design Conveyor Belts12 (Sorting line for heavier fraction > 250 mm -Line 2) Type Flat roller type belt conveyor Motor 7.5 kW (10 HP), 1440 RPM, TEFC (Totally Enclosed Fan Cooled) copper wire conforming to IS: 13730, 3-phase, 4- pole 0 Inclination Approx. 20.4 m from End to End of conveyor Length of Conveyor 1000 mm wide (working width 800 mm) Size of belt Belt Specification Plain rubber belt, 3 ply, 3 mm top, 1.5 mm bottom rubber covering, total plain belt thickness 08 mm, nylon cord conforming to M 24 grade Drive pulley for conveyor 320 mm OD with crowning surface with 60 mm shaft with rubber coating and hearing bone design Rear pulley for conveyor 320 mm OD with crowning surface with 60 mm shaft with rubber coating and hearing bone design Type Flat roller type belt conveyor Motor Inclination 5.63 kW (7.5 HP), 1440 RPM, TEFC (Totally Enclosed Fan Cooled) copper wire conforming to IS: 13730, 3-phase, 4- pole 0 Length of Conveyor Approx. 17 m from End to End of conveyor Size of belt 1000 mm wide (working width 800 mm) Belt Specification Plain rubber belt, 3 ply, 3 mm top, 1.5 mm bottom rubber covering, total plain belt thickness 08 mm, nylon cord conforming to M 24 grade Drive pulley for conveyor 320 mm OD with crowning surface with 60 mm shaft with rubber coating and hearing bone design Rear pulley for conveyor 320 mm OD with crowning surface with 60 mm shaft with rubber coating and hearing bone design Conveyor Belts 14 (Sorting line for heavier fraction < 250 mm) Type Flat roller type belt conveyor Motor 7.5 kW (10 HP), 1440 RPM, TEFC (Totally Enclosed Fan Cooled) copper wire conforming to IS: 13730, 3- hase, 4- pole 0 Inclination Length of Conveyor Approx. 20.4 m from End to End of conveyor ze of belt Belt Specification Drive pulley for conveyor Rear pulley for conveyor 1000 mm wide (working width 800 mm) Plain rubber belt, 3 ply, 3 mm top, 1.5 mm bottom rubber covering, total plain belt thickness 08 mm, nylon cord conforming to M 24 grade 320 mm OD with crowning surface with 60 mm shaft with rubber coating and hearing bone design Ø320 mm OD with crowning surface with 60 mm shaft with rubber coating and hearing bone design Other details (Common for above conveyor belts from 1 to 8) Side Guard 2 mm thick MS sheet with supporting structure Side guard skirting 2 mm thick rubber belt Conveyor body Manu. From IS 2062, 4 mm thickness plate framing structure Rear pulley cover 2 mm thick MS sheet Bearing for roller 6205 2RS type Shaft Precise Machined from EN-24 grade material Guide rollers 60 mm pipe with bright bar spindle and sealed with single roll anti friction deep grooved ball bearing Carrying & return roller 76.1 mm ID ERW pipe with Cl housing, bright bar spindle and sealed with single roll anti friction deep grooved ball bearing Bearing Idler Spacing confirming to IS 9295-1983 Angular contact type with fitted in split housing Carrying Idler-600 to 800 mm, Return Idler 1200 to Belt join 1500 mm Scrappers Endless type belt Driver side: Flat Scrapper Rear Pulley: V plough type Take up Screw type take up design at front side of Conveyor Gear Box Worm type, 20:1 ratio, Hollow input & output Belt speed 1.2 m/sec Pulley RPM 72 RPM Conveyor direction Uni- directional (One side) VFD specification VFD suitable for speed control of conveyor belt motor ranging from 50% to 100% of rated speed Speed Control 0.6 to 1.2 m/sec (using gear & VFD) Supply , Delivery, Erection and fixing of Baling Machine(Nos: 1): 540 X 680 X 2600 (mm x mm x mm) Mild Steel (Confirming to IS: 2062) Vertical Single Cylinder Double Chamber 25 Tonne (Jack force) 540mm x 450mm x 1200mm 1050 mm 50kg -100kg (depending on material feeding & its density) 10min-12min 1 1100 mm 540 x 450 mm 540mm x 450mm x 450mm Yes 65 mm Hand Lever Operation System 5.22 kW (7 HP) copper winding, AC inducting motor, 3-phase, (440 V 50Hz) 8mm A nos 30 mm Confirming to BIS Standards By side door 120 litre UeYes 2 nos 850 kg Yes, shall be provided Supply , Delivery, Erection and fixing of Garden Shredder (Nos: 01): Type of Shredder- Single Shaft Shredder for Municipal Solid Waste containing various objects such as plastic bottles, plastic waste thrash waste, organic waste etc., Capacity : 10 TPD Electrical Cylindrical – Solid router with blades fitted Three phase (440 V.50 Hz) 7.5 HP, 1 , IE1, Manual Based, 1, 2 & Slider Bed Type or Sorting conveyor , Horizontal Type Screw Conveyor Supply , Delivery, Erection and fixing of air blower (Nos:02): Capacity-1500 CFM,Working temperature-30° C, Pressure-750 mm WC, Drive-Direct foot mounted fan Recommended motor power-11 kW or 15 HP, 3 phase, 4-pole, copper winding, confirming to IS 12615:2011 Blower RPM-2900,MoC of Casing-3 mm MS fabricated -MoC of Impeller, MS fabricated-Balancing As per IS 1940, grade 6.3 Standard accessories Set of both ends companion matching flanges, Duly painted with epoxy primer and synthetic paint / HR paint.Power Supply 200-440 V, 50 Hz Electric Motor Standard IE2 rating ABB or BBL or CG make or equivalent.
