Tender For Periodical Maintenance Of L28 To Osihan Road For The Year 2025-26
Tender Value
10.15 Lakhs
Estimated cost
Bid Submission
15 Nov 2025
0 days left
EMD
10150
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nimapara → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Periodical Maintenance Of L28 To Osihan Road For The Year 2025-26
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 meters including removal and disposal of top organic soil not exceeding 150 mm in thickness as per direction of Engineer-in-Charge |
| 2 | Providing and scraping cleaning the road surface applying tack coat using 3.0kg of Bitumen for 10 sqm and laying 37.5mm thik built up spray grouting in one layer using 0.45cum thick of 25mm to 40mm hard granite metal and 12.00kg penetration grade of bitumen for 10sqm with 0.12cum of 12mm size hard granite chips as key stone for 10sqm spreading over and laying including heating pouring and spreading over and spreading bitumen metal and chips and rolling with PRR including hire aunning charges of PRR and all other machinaries including cost and conveyance of bitumen, metal and chips etc complete as per specification and direction of Engineer-in-Charge. |
| 3 | Providing and applying tack coat with bitumen emulsion (RS-1) at the rate of 0.20kg per sqm using emulsion pressure distributor on the prepared Bituminous surface treated with primer using mechanical means including cost, conveyance, royalty & taxes of all materials & cost of all labour & T&P required for the work etc. complete as per specification & direction of Engineer in charge. |
| 4 | Providing and laying 20mm thick Premix Carpet using 0.27 cum of 13.2mm to 5.6mm size crushed stone chipping and 14.60 kgs penetration grade of bitumen for 10Sqm including hand packing to proper camber and consolidation with PRR including running and hire charges of P.R.R but excluding cost and conveyance of chips and bitumen with cost of all taxes of labour etc complete as per specification and direction of the Engineer-in-charge. |
| 5 | Providing and laying 6mm thick Precoated Seal Coat using 0.06 cum of 6.7mm size chips as per sieve analisis and 6.8Kg of bitumen per 10 Sqm including hire and running charges of PRR with cost, conveyance , royalty & taxes of all materials & cost of all labour & T&P required for the work etc. complete as per specification & direction of Engineer in charge. |
| 6 | Construction of embankment with approved material obtained from borrow pits with all lifts & leads, transporting to site by mechanical means, (within a lead of 5Km) spreading, grading to required slope and compacting to meet requirement of Tables 300.2 & clause 305 of MoRT&H specification for Road & Bridge works as per direction of the Engineer-in-Charge |
| 7 | Earth work in oridinary soil within 50m, initial lead and 1.5m, initial lift including rought dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-charge |
| 8 | Supplying and filling in foundation trenches and plinth with sand, well watered and rammed in layers not exceeding 15cm in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge. |
| 9 | Plain Cement Concrete in open foundation with clean black hard granite stone aggregates of 40mm & down graded size of approved quality from approved quarry as per drawings & Technical Specification Clause 1109, 1302.5, 802, 804, 805, 806, 807, 1202 and 1204 of MORD specification for Rural roads and as per direction of Engineer-in-Charge. PCM-15 |
| 10 | Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength,80 MM thickness & size/shape, made by table vibratory method, to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over compacted bed of coarse sand, compacting and proper embeding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath parks, lawns, drive ways or light traffic parking etc. all complete as per manufacturers specification & direction of Engineer-in-charge |
| 11 | Providing and fixing of typical informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 of MORD specification for Rural roads and as per direction of Engineer-in-charge. |
| 12 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 of MORD specification for Rural roadsas per direction of the Engineer-in-Charge.i) 600mm equilateral triangle |
| 13 | ii) 600mm dia circular |
| 14 | Supplying and installing of reinforced cement concrete M 15 grade Kilometer stone/ local stone of standard design as per IRC : 8 fixing in position including painting, and printing etc. as per drawing and technical specification clause 1703 of MORD specification for Rural roads and as per direction of Engineer-in-charge. |
| 15 | Ordinary kilometer stone |
| 16 | 200 M Stone |
| 17 | Providing & fixing of M-15 grade Guard stone / boundary stone of standard design as per IRC-25 fixed position including finishing and lettering as per drawing and Technical Specifications of MORD specification for Rural roads clause 1704 as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedNov 15, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 17, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender