Tender For Providing Internal Amenities For N R H M And Sabhapati Nivas At Z P Sangli- Full Height Partition Providing & fixing wall partition made in 19+19 Millimetre ply frame work, 9 Millimetre thick Plywood finished with 1.00 Millimetre laminate for all exterior sides with approved shade and 12mm glass fixed on teak wood beading as per detailed drawing & design.SS hinges,SS handles, TW lippingetc. complete. As per detailed drawing and design.Plywood - BWR IS 303 standards empowered with antitermite anti fungus chemical.(Before execution sample should be get approved from Engineer In charge) (NHRM SANGLI) 2 Low height Partition Providing & fixing 75 Millimetre thick Partition using 50 Millimetre thick Plywood for Frame having 12 Millimetre thick Plywood for both sides. Partition Should Finished with 1.00 Millimetre thick laminate, 12 Millimetre thick Clear glass with necessary fixtures to be provided as directed etc. complete. As per detailed drawing and design.SS hinges,SS handles, TW lippingetc. complete. As per detailed drawing and design.Plywood - BWR IS 303 standards empowered with antitermite anti fungus chemical.(Before execution sample should be get approved from Engineer In charge) (NHRM SANGLI) 3 Storage Providing & fixing Storage using 19 Millimetre thickBWR plywood IS 303 standards empowered with antitermite anti fungus chemical Plywood for structure 6 mmPlywood for back. 25 mm thick block board full pine BWP Door should finish with handles 12 stainless steel& mortice locking arrangement. All exterior surfaces should finished with 1.00 Millimetre laminate and internaly finished with 1mm thk. white laminate storage should have handles locking arrangement etc. complete as per detailed drawing and design. (Depth of storage 0.45 meter). with all necesaary fixtures and fastenings etc complete. (Before execution sample should be get approved from Engineer In charge) (NHRM SANGLI) 4 Doors for Cabin Entrance Door - Providing & Fixing sandwiched doors for Cabin using 19+12 mm thick ply for both sides should finished with 1.00 mm thick laminate All exterior faces should coverd with T.W. beading doors should have 6 mm thick clear glass, S.S.Handle, Lock, Stopper and Hydraulic door closer etc. complete.SS hinges,SS handles, TW lippingetc. complete. As per detailed drawing and design.Plywood - BWR IS 303 standards empowered with antitermite anti fungus chemical. (NHRM SANGLI) 5 Executive Table (Size 1.80 X 0.90 X 0.75 mt.) Providing & fixing Executive table of size 1.80 X 0.90 X 0.75 meter using 19 + 19 Millimetre thick Plywood for top & 19+12 Millimetre for sides.Externally finished with 1mm thk laminate & internally with 1mm thk white laminaterespectively. Table should have side table of size 1.50 X 0.40 meter with drawers and doors, locking arrangement, footrest, keyboard tray of size 485 X 180 Millimetre & cable manger etc. complete. As per detailed drawing and design.SS hinges,SS handles, TW lippingetc. complete. As per detailed drawing and design.Plywood - BWR IS 303 standards empowered with antitermite anti fungus chemical.(Before execution sample should be get approved from Engineer In charge) (NHRM SANGLI) 6 Computer Table (size 1.20 x 0.60 x 0.75 mt.) Providing & fixing Computer table of size 1.20 X 0.60 X 0.75 meter using 25 mm ply for top & 19 mm thick ply for sides. Internally and externally finished with 1.00 mm thick laminate & internally with 1mm white laminate respectively. Table should have ebco keyboard of size 485 X 180 mm including necessary hardware, teak wood Lipping etc. complete. As per detailed drawing and design.SS hinges,SS handles, TW lippingetc. complete. As per detailed drawing and design.Plywood - BWR IS 303 standards empowered with antitermite anti fungus chemical.(Before execution sample should be get approved from Engineer In charge) (NHRM SANGLI) 7 Executive Luxuries Chair Providing and arrangemnt of high back chair, tilt mechanism with multilocking, high density cushion on seat, composite leather with metalic silver finish base and arms with polyurethene castors, gaslift for height adjustment. (NHRM SANGLI) 8 Executive Chairs Providing and arrangemnt of mid back chair, normal synchronized mechanism, fixed armrest, gaslift for seat height adjustment, standard 5-prong nylon base with leather upholstery. (NHRM SANGLI) 9 Staff / Clerk Chairs Providing and arrangemnt of mid back chair, ECO CTS mechanism, fixed armrest, gaslift for seat height adjustment, standard 5-prong P/Nylon base with fabric upholstery. (NHRM SANGLI) 10 Visitor Chairs Providing and supplying Visitors Chairs of Fix back and seat made of cushioning and cloth fixed to wooden frame and finished as per design and as directed by Engineer incharge. (NHRM SANGLI) 11 Public Seating Chair 3 Seater Providing and fixing 3 seater public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. (NHRM SANGLI) 12 Wall Paneling Providing & fixing wall paneling in 19 Millimetre and 6 Millimetre thick Plywood finished with 1.00 Millimetre laminate for all exterior sides, with approved shade as per detailed drawing & design.SS hinges,SS handles, TW lippingetc. complete. As per detailed drawing and design.Plywood - BWR IS 303 standards empowered with antitermite anti fungus chemical. (Before execution sample should be get approved from Engineer In charge) (NHRM SANGLI) 13 Providing and laying vitrified mirror / glossy finish having decorative type of size 590 milimetre to 605 milimetre X 590 milimetre to 605 milimetre of 8 milimetre to 10 milimetre thickness on existing flooring with bonding chemical and confirming to Indian Standard 15622-2006 (Group BIa) of approved make, shade and pattern for flooring in required position laid on a bed of bonding chemical, filling joints, curing and cleaning, excetra complete. (For Ground Floor) (NHRM SANGLI) 14 Providing and applying plaster / wall punning with Plaster of Paris (with Plaster of Paris material of approved make) in 10 milimetre to 13 milimetre thickness to previously plastered surface / or on new brick surface (excluding rough cast plaster) in all positions including preparing and finishing the surface, scaffolding, excetra complete. (For Ground Floor) (NHRM SANGLI) 15 Only Shutters (0.90 x 2.17) Providing & fixing Shutters for existing in-built storage made in 19+19 Millimetre ply frame work, 19+6 Millimetre thick Plywood finished with 1.00 Millimetre laminate for all exterior sides with approved shade using necessary hardware teakwood lipping and etc. as per detailed drawing & design.SS hinges,SS handles, TW lippingetc. complete. As per detailed drawing and design.Plywood - BWR IS 303 standards empowered with antitermite anti fungus chemical.(Before execution sample should be get approved from Engineer In charge) (NHRM SANGLI) 16 Shelves for Existing in-built-storage Providing & fixing Shelves for existing in-built storage made in19 Millimetre Plywood finished with 1 mm laminate for all exterior sides with approved shade using necessary hardware teakwood lipping and etc. as per detailed drawing & design.SS hinges,SS handles, TW lippingetc. complete. As per detailed drawing and design.Plywood - BWR IS 303 standards empowered with antitermite anti fungus chemical.(Before execution sample should be get approved from Engineer In charge) (NHRM SANGLI) 17 Providing and fixing in position (as per Indian Standard : 1868/1982) aluminium sliding window of three tracks with rectangular pipe having overall dimentsions 95 milimetre X 38 milimetre X 0.90 milimetre at weight 0.637 kilogram per running metre and window frame bottom track section 92 milimetre X 31.75 milimetre X 1.30 milimetre at weight 1.070 kilogram per running metre. Top and side track section 92 milimetre X 31.75 milimetre X 1.30 milimetre at weight 0.933 kilogram per running metre. The shutter should be of bearing bottom 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre. Interlocking secion 40 milimetre X 18 milimetre X 1.10 milimetre at weight 0.469 kilogram per running metre and handle section 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre and top section 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre as per detailed drawing and as directed by Engineer in-charge with all necessary aluminium sections, fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass and aluminium mosquito net shutter with stainless steel jali with all required screws and nuts excetra complete. - With colour anodising without box. (For Ground Floor) (NHRM SANGLI) 18 Providing and fixing machine cut machine polished 18 milimetre to 20 milimetre thick telephone black / amba white / cadbury brown / RBI red / ocean brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on a bed of 1:4 cement mortar including float, filling joints with neat cement slurry, curing, polishing and cleaning, excetra complete. (For Ground Floor) (using NATURAL SAND). (NHRM SANGLI) 19 Providing and fixing rollar blinds of approved make and shade of 38 milimetre round aluminium channel with blackout fabric and telting with chain (ball) system with all necessary fixtures and fitting, excetra complete. (NHRM SANGLI) 20 Providing and applying priming coat on concrete / masonary / asbestos cement / plastered surfaces including scaffolding if necessary, preparing the surface by throughly cleaning oil, grease, dirt and other foreign matters and sand papering as required, excetra comlpete. (For Ground Floor) (NHRM SANGLI) 21 Providing and applying plastic emulsion paint of approved quality, colour and shade to old surface in three coats including scaffolding, preparing the surface (excluding primer coat), excetra complete. (For Ground Floor) (NHRM SANGLI) 22 Officer Table (size 1.50 x 0.75 x 0.75 mt.) Providing & fixing Officer table of size 1.50 X 0.75 X 0.75 meter using 19 + 19 mm thick for top & 19mm for sides. externallyfinished with 1.00 mm thick laminate and internaly finished with 1mm thk. white laminate liner. Table should have side table of size 1.40 X 0.40 meter with drawers and doors, locking arrangement, footrest, keyboard tray of size 485 X 180mm & SS wire manger, brama t w liping, SS hinges 14 gauge heaby duty, 4 SS handles, heavy sinc telescopic chanels, SS wire manater etc. complete. As per detailed drawing and design. Plywood - MR Grade 100 %BWR IS 303 standards empowered with antitermite anti fungus chemical.(Before execution sample should be get approved from Engineer In charge) (NHRM SANGLI) 23 clerk/staff table Providing & fixing clerk/staff table of size 1.37 X 0.60 X 0.75 meter using 25 mm thick block board full pine BWP for top & 19mm,12mm,6mm for sides. externallyfinished with 1.00 mm thick laminate and internaly finished with 1mm thk. white laminate Table should have side table of size 1.40 X 0.40 meter with drawers and doors, locking arrangement, footrest, keyboard tray of size 485 X 180mm & cable manger etc. complete. As per detailed drawing and design. Plywood - BWR IS 303 standards empowered with antitermite anti fungus chemical.(Before execution sample should be get approved from Engineer In charge) (NHRM SANGLI) 24 Wall Paneling Providing & fixing wall paneling in 19 Millimetre and 6 Millimetre thick Plywood finished with 1.00 Millimetre laminate for all exterior sides, with approved shade as per detailed drawing & design.SS hinges,SS handles, TW lippingetc. complete. As per detailed drawing and design.Plywood - BWR IS 303 standards empowered with antitermite anti fungus chemical. (Before execution sample should be get approved from Engineer In charge) (sabhapati Nivas) 25 Storage Providing & fixing Storage using 19 Millimetre thickBWR plywood IS 303 standards empowered with antitermite anti fungus chemical Plywood for structure 6 mmPlywood for back. 25 mm thick block board full pine BWP Door should finish with handles 12 stainless steel& mortice locking arrangement. All exterior surfaces should finished with 1.00 Millimetre laminate and internaly finished with 1mm thk. white laminate storage should have handles locking arrangement etc. complete as per detailed drawing and design. (Depth of storage 0.45 meter). with all necesaary fixtures and fastenings etc complete. (Before execution sample should be get approved from Engineer In charge) (sabhapati Nivas) 26 Providing and fixing single bed of size 2025 milimetre long X 1000 milimetre wide X 650 milimetre deep with matress and pillow. Understructure - The legs are made of square tube of size 25 milimetre X 25 milimetre made out of mild steel sheet with a thickness of 1.2 milimetre. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2 milimetre thick cold rolled close annealed sheet having a L shaped structure to join the side panels and headboard to the leg. (sabhapati Nivas) 27 Providing and fixing sofa set 3+1+1 brown and cream leather Dimensions - length 182.5 centimetre, breadth 100 centimetre, height 100 centimetre, weight - 66 kg. Seating capacity - five seat. (sabhapati Nivas) 28 Providing and fixing of tea table 900 milimetre X 750 milimetre X 450 milimetre with 12 milimetre thick colour eitched tempered glass with bevelled drawing made out of 18 milimetre thick waterproof ply. The outer laces to be finished with high quality 4 milimetre thick veneer or 1 milimetre thick mica, excetra (sabhapati Nivas) 29 Dinning Table - Providing & supplying teak wood Dining tablewith 6 chairs having top of size 6ft x 3ft. Top should finished with 1mm laminate. Chairs should have round back and cusion for seat.Rate Rate Approved by T.C.P.C.Satara WTB.25. (sabhapati Nivas) 30 Providing and fixing stainless steel kitchen trolley of overall 26 inch height and 22 inch depth, supported on aluminium pipes, trolley basket made out of 5 milimetre stainless steel rod fitted on telescopic channel of size 1.5 inch X 20 inch X 22 inch on both sides of trolley of 12 inch or above size, panel having 40 kilogram load bearing capacity of trolley made out of 20 milimetre polyvinyl chloride coated plywood and colour combination as directed by Engineer in-charge. Inner side of panel covered by white mica, 100 milimetre stainless steel decorative handle. (The width and height of individual compartments shall be kept as directed by Engineer in-charge). (sabhapati Nivas) 31 Public Seating Chair 3 Seater Providing and fixing 3 seater public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. (sabhapati Nivas) 32 Providing and fixing frame work of galvanised iron for suspended false ceilling which includes galvanised iron perimetre channels of size 27 milimetre and 0.5 milimetre thick having one flange of 20 milimetre and another flange of 30 milimetre along with perimetre of the celling, fixing in brick wall / partition with the help of rawal plugs and screws, suspending galvanised iron intermediate channels of size 45 milimetre and 0.9 milimetre thick with two flanges of 15 milimetre each from the soffit at 1200 milimetre centres with steel galvanised iron hanger of width 25 milimetre X 0.5 milimetre fasteners, celling section of 0.5 milimetre thickness having curved wedge of 51.5 milimetre and two flanges of 26 milimetre each with lips of 10.5 milimetre fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel 450 milimetre centres, 12.5 milimetre dry wall screws at 230 milimetre centres, fixing screws mechanically either with screw driver or drilling machine with suitable attachment, excetra complete. (For Ground Floor) (sabhapati Nivas) 33 Providing and fixing false ceilling of 10 milimetre to 12 milimetre thick decorative boards of fibrous plaster of paris including scaffolding, if necessary, all architectural work like mouldings, cornices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards, excetra complete. (excluding frame work, runners and mild steel supenders). (For Ground Floor) (sabhapati Nivas) 34 Only Shutters (0.90 x 2.17) Providing & fixing Shutters for existing in-built storage made in 19+19 Millimetre ply frame work, 19+6 Millimetre thick Plywood finished with 1.00 Millimetre laminate for all exterior sides with approved shade using necessary hardware teakwood lipping and etc. as per detailed drawing & design.SS hinges,SS handles, TW lippingetc. complete. As per detailed drawing and design.Plywood - BWR IS 303 standards empowered with antitermite anti fungus chemical.(Before execution sample should be get approved from Engineer In charge) (sabhapati Nivas) 35 Providing and fixing machine cut machine polished 18 milimetre to 20 milimetre thick telephone black / amba white / cadbury brown / RBI red / ocean brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on a bed of 1:4 cement mortar including float, filling joints with neat cement slurry, curing, polishing and cleaning, excetra complete. (For Ground Floor) (using NATURAL SAND). (sabhapati Nivas) 36 Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below - Scrapping for surface with emery paper and wipe clean for area. Applying wall primer with brush by adding mineral turpentine oil by 8 to 10 percent or water by 15 to 20 percent allowing to dry for 6 to 8 hours. After applying approved make acrylic wall putty with appropriate proportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean. Applying paints Royale Luxury emulsion first coat with brush water content water 40 to 45 percent or 65 to 70 percent by role. Applying paints Royale luxury emulsion second coat with brush with water content 40 to 45 percent or 65 to 70 percent by roller. (With prior approval of S.E.) (For Ground Floor) (sabhapati Nivas) 37 Providing and applying priming coat on concrete / masonary / asbestos cement / plastered surfaces including scaffolding if necessary, preparing the surface by throughly cleaning oil, grease, dirt and other foreign matters and sand papering as required, excetra comlpete. (For Ground Floor) (sabhapati Nivas) 38 Providing and applying plaster / wall punning with Plaster of Paris (with Plaster of Paris material of approved make) in 10 milimetre to 13 milimetre thickness to previously plastered surface / or on new brick surface (excluding rough cast plaster) in all positions including preparing and finishing the surface, scaffolding, excetra complete. (For Ground Floor) (sabhapati Nivas) 39 Providing and fixing rollar blinds of approved make and shade of 38 milimetre round aluminium channel with blackout fabric and telting with chain (ball) system with all necessary fixtures and fitting, excetra complete. (sabhapati Nivas) 40 Doors for Cabin Entrance Door - Providing & Fixing sandwiched doors for Cabin using 19+12 mm thick ply for both sides should finished with 1.00 mm thick laminate All exterior faces should coverd with T.W. beading doors should have 6 mm thick clear glass, S.S.Handle, Lock, Stopper and Hydraulic door closer etc. complete.SS hinges,SS handles, TW lippingetc. complete. As per detailed drawing and design.Plywood - BWR IS 303 standards empowered with antitermite anti fungus chemical. (sabhapati Nivas) 41 Providing and laying jointless Polydee-LM, a highly flexible elastometric coating for reinforced cement concrete / cementitious surface for terrace waterproofing on burnt brick coba / reinforced cement concrete, after application of TP-42 primer on perfectly clean surface (free from loose dust and foreign matter) application of first coat of Polydee-LM at the rate of 700 grams per square metre, applying second coat of Polydee-LM at the rate of 700 grams per square metre and finishing the same with sprinkling the AG-10 granules on the wet coating. (After finishing covering the treatment with 25 milimetre cement plaster for protection with fibrillated 6 milimetre Plyplast fibre at the rate of 125 grams per square metre to be paid in separate item.) covering seven years gaurantee on court fee stamp paper of Rs. 100/- excetra complete. (For Ground Floor) (sabhapati Nivas) 42 vinyal flooring Providing, laying & pesting commercal grade 2.00 mm thick vinyal flooring of plank size 0.23x0.90 total weight 4 kg/sqm,wear layer thickness 200 micruns. Flooring should pest using adsive only Aro bond 44/fevical V.C. 31 etc, Complete.As directed by Engg. incharge. (sabhapati Nivas) 43 Providing and fixing oval type under counter wash hand basin of 16 inch X 22 inch size and of special colour shed having telephonic black / colour granite of 18 milimetre thick fixed on black kadapaa frame work, including cromium plated coupling, bottle-trap using approved make oval type wash basin as per detailed drawing or as directed by Engineer In-charge, excetra complete. (For Ground Floor) (sabhapati Nivas) 44 Providing and fixing european type wall hung white water closet of approved make with push valve consealed type with cover plate 32 milimetre size of approved make including soil pipe, vent pipe upto outside face of wall, 100 milimetre diameter galvanised iron plug, bend, inlet pipe all fittings, cutting and making good walls, floors, excetra complete. (For Ground Floor) (sabhapati Nivas) 45 Providing and fixing wall mixer with overhead shower,shower arm,hand shower with wall bracket having flow rate up to 12 litre per minute of Jaquar/ Cera/ Hindware/ Perryware or equivalentmake including all necessary pipes,fittings etc.complete as directed by Engineer In Charge.( Make shall conform to manufacturers Green product and shall got approved from the Engineer In Charge.) (For Ground Floor) (sabhapati Nivas) 46 Providing and fixing chromium plated bib cock with wall flange of approved make including necessary sockets / union nut, excetra complete. (For Ground Floor) (sabhapati Nivas) 47 Providing and fixing chromium plated pillar cock long neck with aerator of approved make including necessary sockets / union nut, excetra complete. (For Ground Floor) (sabhapati Nivas) 48 Providing and fixing chromium plated angular stop cock with wall flange of approved make including necessary sockets / union nut, excetra complete. (For Ground Floor) (sabhapati Nivas) 49 Providing and fixing 450 milimetre X 550 milimetre size superior type belgium mirror with 16 milimetre diameter nickel plated towel rod, excetra complete. (For Ground Floor) (sabhapati Nivas) 50 Providing and fixing chromium plated towel rod 16 milimetre diameter and 75 centimetre in length including all accessories complete. (For Ground Floor) (sabhapati Nivas) 51 Providing and fixing solid core flush door commerical type in single leaf 16 milimetre thick Bison panel cement bonded partical board including teak wood lipping, beading on all four edges, without ventilator commercial type of exterior grade as per detailed drawings, with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting three coats, excetra complete. (For Ground Floor) (sabhapati Nivas) 52 Providing and laying in trenches 32 milimetre diameter chlorinated poly vinyl chloride pipe including necessary excavation, fittings, refilling trenches, excetra complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed excetra complete. (sabhapati Nivas) 53 Providing and fixing on walls / celling / floor, 20 milimetre diameter chlorinated poly vinyl chloride pipe with necessary fittings, remaking good the demolished portion, excetra complete.Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed excetra complete. (For Ground Floor) (sabhapati Nivas) 54 Providing and laying 100 milimetre diameter salt glazed stoneware pipe including fittings such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete. (sabhapati Nivas) 55 Providing and fixing 10 centimetre poly vinyl chloride nahani trap with grating, excetra complete. (For Ground Floor) (sabhapati Nivas) 56 Low height Partition Providing & fixing 75 Millimetre thick Partition using 50 Millimetre thick Plywood for Frame having 12 Millimetre thick Plywood for both sides. Partition Should Finished with 1.00 Millimetre thick laminate, 12 Millimetre thick Clear glass with necessary fixtures to be provided as directed etc. complete. As per detailed drawing and design.SS hinges,SS handles, TW lippingetc. complete. As per detailed drawing and design.Plywood - BWR IS 303 standards empowered with antitermite anti fungus chemical.(Before execution sample should be get approved from Engineer In charge) (sabhapati Nivas) 57 Providing and fixing single faced mobile unit for compactor 2150 milimetre height X 2745 milimetre width X 457 milimetre depth. (sabhapati Nivas) 58 Providing and fixing single faced fixed unit for compactor 2150 milimetre height X 2745 milimetre width X 457 milimetre depth. Base Frame shall be fabricated in channel type from minimum 2.5 milimetre thick mild steel sheet size of channel 25 milimetre X 100 milimetre X 45 milimetre. The guide rails shall be made out of 28 milimetre bright bar placed on 1.2 milimetre thick mild steel sheet which will be above the floor and are as per the international standard of safety. Super structure of the mobile storage system will consist of knock down type panels. All the components such as shelves, front panel, end panel, vertical rear panel, central partition, excetra will act as an integral member of the unit. Shelves made of 22 standard wire gauge thick prime quality cold rolled close annealed sheet having 10 folds each will be provided each designed to carry a unifirmly distrubuted load of 70 kg. Vertical panel consists of the front, Centre and rear panel shall be made out of 20 standard wire gauge thick cold rolled close annealed prime quality mild steel sheet and designed to take the load of shelves. Drive cover panel made out of 22 standard wire gauge thick cold rolled close annealed prime quality steel sheet to cover the entire drive mechanism. The Centre partition will comprise of a full cold rolled close annealed prime quality mild steel 22 standard wire gauge Sheet. Locking system will be provided with individual rack locking as well as centralised locking arrangement on the last unit when all units are brought together, central lock when operated gets locked with the floor and does not allow access to the units. Driving mechanism will be provided externally supported on special grade anti-friction bearing to have smooth and effortless movement. Entire mechanism or gear and sprockets shall be incorporated within the front panel provided in the front of the unit within an area of 1000 milimetre X 200 milimetre X 60 milimetre. Fully powder coated three pronged drive wheel for better torque and free movement of the rack over the guide rail. For indexing arrangement, acrylic card holders provided on the front panel for easy identification and retrieval. Final finish will be powder coating (8 tanks process with 70 microns). (sabhapati Nivas) 59 Providing and fixing double faced mobile unit for compactor 2150 milimetre height X 1830 milimetre width X 900 milimetre depth. Base Frame shall be fabricated in channel type from minimum 2.5 milimetre thick mild steel sheet size of channel 25 milimetre X 100 milimetre X 45 milimetre. The guide rails shall be made out of 28 milimetre bright bar placed on 1.2 milimetre thick mild steel sheet which will be above the floor and are as per the international standard of safety. Super structure of the mobile storage system will consist of knock down type panels. All the components such as shelves, front panel, end panel, vertical rear panel, central partition, excetra will act as an integral member of the Unit. Shelves made of 22 standard wire gauge thick prime quality cold rolled close annealed sheet having 10 folds each will be provided each designed to carry a unifirmly distrubuted load of 70 kg. Vertical panel consists of the front, Centre and rear panel shall be made out of 20 standard wire gauge thick cold rolled close annealed prime quality mild steel sheet and designed to take the load of shelves. Drive cover panel made out of 22 standard wire gauge thick cold rolled close annealed prime quality steel sheet to cover the entire drive mechanism. The Centre partition will comprise of a full cold rolled close annealed prime quality mild steel 22 standard wire gauge Sheet. Locking system will be provided with individual rack locking as well as centralised locking arrangement on the last unit when all units are brought together, central lock when operated gets locked with the floor and does not allow access to the units. Driving mechanism will be provided externally supported on special grade anti-friction bearing to have smooth and effortless movement. Entire mechanism or gear and sprockets shall be incorporated within the front panel provided in the front of the unit within an area of 1000 milimetre X 200 milimetre X 60 milimetre. Fully powder coated three pronged drive wheel for better torque and free movement of the rack over the guide rail. For indexing arrangement, acrylic card holders provided on the front panel for easy identification and retrieval. Final finish will be powder coating (8 tanks process with 70 microns). (sabhapati Nivas)
