|
| 1 | A. Athletic Stadium Spectator Gallery:-Providing and Fixing of floor Mountblow moulded bucket type Spectator Seat.Providing double-wall hollow blow mold bucket type seat having minimum dimensions as 500 mm Depth x 440 mm front width x 420 mm rear height in one piece of HDPE having minimum shell thickness of 2 mm on each wall. Minimum seat density of 0.95 gram/cm3, weight of plastic chair should not be less than 2.4 kg. Chairshouldwithstandinhigh temperature not less than 50°C with ultraviolet stabilizer and color fastness, having ergonomic design, with two-digit aluminum number plate for seat to be fixed on Aluminum floor mount frame by the process of grouting with bolt. The chair should be fixed with Metal Inserts molded inside seat to connect seat with Galvanized pipes 32mm OD tube and 2 mm thickness running under the chairs. The pipes are resting above Aluminum bracket at c/c distance from 1.0 to 1.5 mtr and all open ends of all pipes are to be closed by PVC cap. Water should not accumulate on chair. Chair should have a warranty of 2 years against significant color fading and 5year against breakage due to manufacturing.Chair Plastic Part tested with xenon –Arc exposure Test as per ISO 4892-2:2013. Cycle-1. |
| 2 | Providing and Fixing of Beam Mount blow moulded VIP Seat With Arm Rest. Providing and fixing double-wall hollow blow mold two component seat with Arm and cup holder having minimum dimensions as 450 mm side length x 510 mm rear height in two pieces ofHDPEhavingminimum shell thickness of 2.3 mm on each wall of top part and 2-5mm on each wall of bottom part. and minimum density of 0.95 gram/cm3, weight of plastic chair Top part should not be less than 1.7 kg, And Bottom part should not be less 2.0 kg the seat to withstand in high temperature not less than 50°C with ultraviolet stabilizer and color fastness, having ergonomic design, the stand to be fabricated from 60 x 40 x 3mm & vertical 40mm Square tube with square flange of size 100X100X6mm thk bottom and back parts connected with 3 mm thick brackets. The total frame to be powder coated and the total chair assembly to fold with gravity type system. The stand should be fixed to ground with help of Hilti / Wruth anchor fasteners. Chair should have a warranty of 2 years against significant colour fading and 5 years against breakage due to manufacturing defects.Chair Plastic Part should have been tested with xenon –Arc exposure Test as per ISO 4892-2:2013, Cycle-1. The Grey Sale Rating should be (GSR): > 4, Delta Δ E: < 3 The seat should pass BS EN 12727: 2016 TEST. |
| 3 | Removing of Existing Chairs and staking at location instructed by Engineer In Charge |
| 4 | B. 10 Meter Shooting Range Spectator Gallery:-Providing and Fixing of floor Mountblow moulded bucket type Spectator Seat.Providing double-wall hollow blow mold bucket type seat having minimum dimensions as 500 mm Depth x 440 mm front width x 420 mm rear height in one piece of HDPE having minimum shell thickness of 2 mm on each wall. Minimum seat density of 0.95 gram/cm3, weight of plastic chair should not be less than 2.4 kg. Chairshouldwithstandinhigh temperature not less than 50°C with ultraviolet stabilizer and color fastness, having ergonomic design, with two-digit aluminum number plate for seat to be fixed on Aluminum floor mount frame by the process of grouting with bolt. The chair should be fixed with Metal Inserts molded inside seat to connect seat with Galvanized pipes 32mm OD tube and 2 mm thickness running under the chairs. The pipes are resting above Aluminum bracket at c/c distance from 1.0 to 1.5 mtr and all open ends of all pipes are to be closed by PVC cap. Water should not accumulate on chair. Chair should have a warranty of 2 years against significant color fading and 5year against breakage due to manufacturing.Chair Plastic Part tested with xenon –Arc exposure Test as per ISO 4892-2:2013. Cycle-1. |
| 5 | Removing of Existing Chairs and staking at location instructed by Engineer In Charge |
| 6 | C. 25 Meter Shooting Range Spectator Gallery:-Providing and Fixing of floor Mountblow moulded bucket type Spectator Seat.Providing double-wall hollow blow mold bucket type seat having minimum dimensions as 500 mm Depth x 440 mm front width x 420 mm rear height in one piece of HDPE having minimum shell thickness of 2 mm on each wall. Minimum seat density of 0.95 gram/cm3, weight of plastic chair should not be less than 2.4 kg. Chairshouldwithstandinhigh temperature not less than 50°C with ultraviolet stabilizer and color fastness, having ergonomic design, with two-digit aluminum number plate for seat to be fixed on Aluminum floor mount frame by the process of grouting with bolt. The chair should be fixed with Metal Inserts molded inside seat to connect seat with Galvanized pipes 32mm OD tube and 2 mm thickness running under the chairs. The pipes are resting above Aluminum bracket at c/c distance from 1.0 to 1.5 mtr and all open ends of all pipes are to be closed by PVC cap. Water should not accumulate on chair. Chair should have a warranty of 2 years against significant color fading and 5year against breakage due to manufacturing.Chair Plastic Part tested with xenon –Arc exposure Test as per ISO 4892-2:2013. Cycle-1. |
| 7 | Removing of Existing Chairs and staking at location instructed by Engineer In Charge |
| 8 | D. 50 Meter Shooting Range Spectator Gallery:-Providing and Fixing of floor Mountblow moulded bucket type Spectator Seat.Providing double-wall hollow blow mold bucket type seat having minimum dimensions as 500 mm Depth x 440 mm front width x 420 mm rear height in one piece of HDPE having minimum shell thickness of 2 mm on each wall. Minimum seat density of 0.95 gram/cm3, weight of plastic chair should not be less than 2.4 kg. Chairshouldwithstandinhigh temperature not less than 50°C with ultraviolet stabilizer and color fastness, having ergonomic design, with two-digit aluminum number plate for seat to be fixed on Aluminum floor mount frame by the process of grouting with bolt. The chair should be fixed with Metal Inserts molded inside seat to connect seat with Galvanized pipes 32mm OD tube and 2 mm thickness running under the chairs. The pipes are resting above Aluminum bracket at c/c distance from 1.0 to 1.5 mtr and all open ends of all pipes are to be closed by PVC cap. Water should not accumulate on chair. Chair should have a warranty of 2 years against significant color fading and 5year against breakage due to manufacturing.Chair Plastic Part tested with xenon –Arc exposure Test as per ISO 4892-2:2013. Cycle-1. |
| 9 | Removing of Existing Chairs and staking at location instructed by Engineer In Charge |
| 10 | E. Final Shooting Range Spectator Gallery:-Providing and Fixing of floor Mountblow moulded bucket type Spectator Seat.Providing double-wall hollow blow mold bucket type seat having minimum dimensions as 500 mm Depth x 440 mm front width x 420 mm rear height in one piece of HDPE having minimum shell thickness of 2 mm on each wall. Minimum seat density of 0.95 gram/cm3, weight of plastic chair should not be less than 2.4 kg. Chairshouldwithstandinhigh temperature not less than 50°C with ultraviolet stabilizer and color fastness, having ergonomic design, with two-digit aluminum number plate for seat to be fixed on Aluminum floor mount frame by the process of grouting with bolt. The chair should be fixed with Metal Inserts molded inside seat to connect seat with Galvanized pipes 32mm OD tube and 2 mm thickness running under the chairs. The pipes are resting above Aluminum bracket at c/c distance from 1.0 to 1.5 mtr and all open ends of all pipes are to be closed by PVC cap. Water should not accumulate on chair. Chair should have a warranty of 2 years against significant color fading and 5year against breakage due to manufacturing.Chair Plastic Part tested with xenon –Arc exposure Test as per ISO 4892-2:2013. Cycle-1. |
| 11 | Removing of Existing Chairs and staking at location instructed by Engineer In Charge |
| 12 | F. Trap & Skeet Spectator Gallery:-Providing and Fixing of floor Mountblow moulded bucket type Spectator Seat.Providing double-wall hollow blow mold bucket type seat having minimum dimensions as 500 mm Depth x 440 mm front width x 420 mm rear height in one piece of HDPE having minimum shell thickness of 2 mm on each wall. Minimum seat density of 0.95 gram/cm3, weight of plastic chair should not be less than 2.4 kg. Chairshouldwithstandinhigh temperature not less than 50°C with ultraviolet stabilizer and color fastness, having ergonomic design, with two-digit aluminum number plate for seat to be fixed on Aluminum floor mount frame by the process of grouting with bolt. The chair should be fixed with Metal Inserts molded inside seat to connect seat with Galvanized pipes 32mm OD tube and 2 mm thickness running under the chairs. The pipes are resting above Aluminum bracket at c/c distance from 1.0 to 1.5 mtr and all open ends of all pipes are to be closed by PVC cap. Water should not accumulate on chair. Chair should have a warranty of 2 years against significant color fading and 5year against breakage due to manufacturing.Chair Plastic Part tested with xenon –Arc exposure Test as per ISO 4892-2:2013. Cycle-1. |
