Tender For maintenance And Furniture Work Of Public Work (West) Division Building Sangli, Tal.Miraj, Dist.Sangli.-1 Removing doors and windows with frames and stacking the materials as directed with all leads, lifts excetra complete. ---- 2 Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts excetra complete. ---- 3 Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts excetra complete. ---- 4 Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts excetra complete. ---- 5 Providing water proof bedding for flooring of bath and water closet 25 milimetre thick in cement mortar 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs. 500/- including ponding test, excetra complete. (For First Floor) (using ARTIFICIAL SAND). 6 Providing and laying Cast in situ/Ready Mix, cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailling out water, formwork, laying/ pumping, compacting and curing, excetra complete, with fully automatic micro processor based Programmable Logic Controller without Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed, excetra) (using ARTIFICIAL SAND). 7 Providing and laying cast in situ /Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks,laying/pumping, compaction and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller without Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (For First Floor) (using ARTIFICIAL SAND). 8 Providing second class Burnt Brick masonry with conventional / Indian Standard type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 milimetre diameter / 2 hoop iron strips 25 milimetre X 1.6 milimetre placed at every third course, properly bent and bounded at ends, scaffolding, racking out joints and watering, excetra complete. (For First Floor) (using ARTIFICIAL SAND). 9 Providing and laying telephone black / amba white / cadbury brown / RBI red / ocean brown granite stone of 18 milimetre to 20 milimetre thick for door frame / dado / window boxing, excetra on cement mortar 1:6 including filling joints with polymer base filler, nosing the sharp edges wherever necessary, curing, excetra complete. (For First Floor) (using ARTIFICIAL SAND). 10 Providing and fixing machine cut machine polished 18 milimetre to 20 milimetre thick telephone black / amba white / cadbury brown / RBI red / ocean brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on a bed of 1:4 cement mortar including float, filling joints with neat cement slurry, curing, polishing and cleaning, excetra complete. (For Ground Floor) (using ARTIFICIAL SAND). 11 Providing and laying vitrified matt finish tiles of having size 590 milimetre to 605 milimetre X to 605 milimetre of 8 milimetre to 10 milimetre thickness and confirming to Indian Standard 15622-2006 (Group BIa) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning, excetra complete. (For First Floor) (using ARTIFICIAL SAND). 12 Providing and laying vitrified mirror / glossy finish tiles having size 590 milimetre to 605 milimetre X 590 milimetre to 605 milimetre of 8 milimetre to 10 milimetre thickness and confirming to Indian Standard 15622-2006 (Group BIa) of approved make, shade and pattern for dado and skirting in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning, excetra complete. (For First Floor) (using ARTIFICIAL SAND). 13 Providing and fixing in position thermo mechnically treated FE-500 steel bar reinforcement of various dias for reinforced cement concrete pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardis, copings, fins, arches, excetra as per detailed designs, drawings and schedules including cutting, bendding, hooking the bars, binding with wires or tack welding and supporting as requied complete. (For First Floor) 14 Providing waterproof plaster in water closet and bath 20 milimetre thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of one kilogram per bag of cement of approved make and manufacturer and curing and filling joints of nahani trap and any outlet properly, excetra complete. (For First Floor) (using ARTIFICIAL SAND). 15 Providing internal cement plaster 20 milimetre thick in single coat in cement mortar 1:4 without neeru finish to concrete, brick surface, in all positions including scaffolding and curing, excetra complete. (For First Floor) (using ARTIFICIAL SAND). 16 Providing and fixing single leaf panelled door shutter without fanlight shutter and 35 milimetre thick as per drawing consisting of teak wood top rail size 100 milimetre X 35 milimetre and bottom rail and lock rail 200 milimetre X 35 milimetre insert panel 12 milimetre thick commerical playfaced teak wood partical board with panel formaldehyed synthetic resin (Generally confirming to Indian Standard 3097) excluding frame including stainless steel fixtures fastening and teak wood beading at junctions of panels inserts and as instructed by the Engineer in charge including three coats of oil painting, excetra complete. (For 3rd Floor) 17 Providing and fixing in position (as per Indian Standard : 1868/1982) aluminium sliding window of three tracks with rectangular pipe having overall dimentsions 95 milimetre X 38 milimetre X 0.90 milimetre at weight 0.637 kilogram per running metre and window frame bottom track section 92 milimetre X 31.75 milimetre X 1.30 milimetre at weight 1.070 kilogram per running metre. Top and side track section 92 milimetre X 31.75 milimetre X 1.30 milimetre at weight 0.933 kilogram per running metre. The shutter should be of bearing bottom 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre. Interlocking secion 40 milimetre X 18 milimetre X 1.10 milimetre at weight 0.469 kilogram per running metre and handle section 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre and top section 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre as per detailed drawing and as directed by Engineer in-charge with all necessary aluminium sections, fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass and aluminium mosquito net shutter with stainless steel jali with all required screws and nuts excetra complete. - With colour anodising with box. (For First Floor) 18 Providing and fixing 30 milimetre thick solid panel polyvinyl chloride internal door shutter consisting of frame made out of mild steel tubes of 19 gauge thickness and size of 40 milimetre X 20 milimetre for stiles, top, lock and bottom rails. Mild steel frame shall have a coat of steel primers of approved make and manufacture. Mild steel frame shall be covered with 5 milimetre thick heat moulded Rajshri polyvinyl chloride C channel of size 30 milimetre X 100 milimetre forming stiles, and 5 milimetre thick, 125 milimetre wide poly vinyl chloride sheets for top rail, lock rail and bottom rail on either side, and 15 milimetre (5 milimetre X 3) thick, 20 milimetre wide cross poly vinyl chloride sheet as gap insert for top rail and bottom rail. Paneling of 10 milimetre thick prelam poly vinyl chloride sheet to be fitted in the mild steel frame welded / sealed to the stiles and rails with 30 milimetre wide X 5 milimetre thick poly vinyl chloride sheet beading on either side, and joined together with solvent cement adhesive, excetra An additional 5 milimetre thick poly vinyl chloride strip of 20 milimetre width is to be stuck on the interior side of the C Channel using polyvinyl chloride solvent cement adhesive, including stainless steel fixtures and fastening Complete as per direction of Engineer-incharge, manufacturer’s specification and drawing. (For First Floor) 19 Providing and fixing mild steel grill work for windows, ventilators, excetra 15 kilogram per square metre as per drawing including fixtures, necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting, excetra complete. (For First Floor) 20 Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 milimetre X 38 milimetre X 1.22 milimetre box type, 5 milimetre thick sheet glass louvers of approved quality, excetra complete. (For First Floor) 21 Providing and fixing 10 centimetre cast iron nahani trap including cast iron grating, bend and piece of cast iron pipe upto the outside face of the wall complete. (For First Floor) 22 Providing and fixing european type wall hung white water closet of approved make with push valve consealed type with cover plate 32 milimetre size of approved make including soil pipe, vent pipe upto outside face of wall, 100 milimetre diameter galvanised iron plug, bend, inlet pipe all fittings, cutting and making good walls, floors, excetra complete. (For First Floor) 23 Providing and fixing on walls / celling / floor 15 milimetre diameter unplasticized polyvinyl chloride pipe with necessary fittings, remaking good the demolished portion, excetra complete.Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed excetra complete. (For First Floor) 24 Providing and fixing on walls / celling / floor 20 milimetre diameter unplasticized polyvinyl chloride pipe with necessary fittings, remaking good the demolished portion, excetra complete.Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed excetra complete. (For First Floor) 25 Providing and fixing 100 milimetre diameter stabilliser pipe polyvinyl chloride soil vent / waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps, excetra complete. (For First Floor) 26 Providing and fixing oval type under counter wash hand basin of 16 inch X 22 inch size and of special colour shed having telephonic black / colour granite of 18 milimetre thick fixed on black kadapaa frame work, including cromium plated coupling, bottle-trap using approved make oval type wash basin as per detailed drawing or as directed by Engineer Incharge, excetra complete. (For First Floor) 27 Providing and fixing 15 milimetre diameter screw down bib stop tap of brass including necessary socket union nut complete. (For First Floor) 28 Providing, laying and fixing, jointing Eco-drain 110 milimetre SN 8 Nu-Drain unplasticized poly vinyl chloride pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per Indian Standard : 15328 with fittings such a bends, tees, coupler, excetra jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material, excetra complete. (For First Floor) 29 Providing and constructing brick masonry inspection chamber 60 centimetre X 45 centimetre X 90 centimetre including 1:4:8 cement concrete foundation, 1:2:4 cement concrete channels, half round glazed stoneware pipes, brick masonary, plastering from inside and farme fixed in cement concrete Cover medium duty 140 kilogram with frame excetra complete. (using ARTIFICIAL SAND). 30 Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fiber glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 square metre per kilogram with two coats Using approved chemicals for masonry and concrete surface by brush, covering seven years gaurantee on stamp paper, excetra complete. (For 2nd Floor) 31 Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below - Scrapping for surface with emery paper and wipe clean for area. Applying wall primer with brush by adding mineral turpentine oil by 8 to 10 percent or water by 15 to 20 percent allowing to dry for 6 to 8 hours. After applying approved make acrylic wall putty with appropriate proportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean. Applying paints Royale Luxury emulsion first coat with brush water content water 40 to 45 percent or 65 to 70 percent by role. Applying paints Royale luxury emulsion second coat with brush with water content 40 to 45 percent or 65 to 70 percent by roller. (With prior approval of S.E.) (For First Floor) 32 Providing and fixing in position Phenol bonded Bamboo wood flooring with planks of sizes 14 milimetre thick, 1800 milimetre length (minium) and 130 milimetre wide (minimum), in approved colour, texture and finish, having Performance Appraisal certified (PAC) issued by Building Materials and Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of four milimetre thick expanded poly ethylene foam sheets having density 40 kilogram per cubic metre, over prepared surface with necessary quarter round planks of size 1900 milimetre X 18 milimetre and door reducer of size 1900 milimetre X 44 milimetre, whereever required. The bamboo wood planks shall have minimum density of 1000 kilogram per cubic metre and minimum Hardness 1000 kilogramf. with Eco friendly ultra violet coating, all complete as per direction of Engineer in -charge. Ground floor. 33 Providing and fixing 3.5 milimetre to 4 milimetre thick Veneer finish wall panaling made out of 50 milimetre X 25 milimetre (finished size) country cut teak wood frame work or size of 600 milimetre X 600 milimetre center or as per site condition covered by 6 milimetre thick marine plywood generally confiriming to Indian Standard : 710-1980 finished with 3.5 to 4 milimetre thick matching Veneer of approved color and in satin wallnut groov matched veneer pattern and design including melamine polishing and design with antitermite treatment, excetra to plywood and woodwork with ten years guarantee bond, excetra including all lead and lifts complete as per Architects Drawing and instructions of Engineer Incharge. (For First Floor) 34 Providing and fixing teak wood cover moulding 45 milimetre X 20 milimetre over doors and windows in the required shape and size as per drawing, including all mouldings and finishing with french polishing, excetra complete. (For First Floor) 35 Providing and fixing in position, acoustical ceiling made from Rigitone 8/18 perforated panels on approved heavy duty galvanised iron frame ceiling channels at 300 milimetre center to center and intermediate channels not more than 1200 milimetre c/c, along with ply wood forms suspended with hangers from roof, in front of 1000 grams per square metre synthetic wool 50 milimetre thick, with paint, including cost of required cut-outs, decorative mouldings / finishing items and scaffolding, as per architectural and acoustical design and instructions and complete in all aspects including all materials, labour, finishing, excetra complete. 36 Providing and fixing solid core flush door shutter in single leaf 32 milimetre thick decorative type of exterior grade as per detailed drawings, approved face veneers 3 milimetre thick on both faces or as directed, all necessary beeds, moulding and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides and finishing with french polish, excetra complete. (For First Floor) 37 Providing and fixing frame with / without ventilator of size as specified with country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300 milimetre X 40 milimetre X 5 milimetre with oil painting, excetra complete. (For First Floor) 38 providing and fixing in position main cabin table of size 3.0MX1.5M in 18mm thk marine plywood with internally 1mm thk liner laminates and externally with t.w. moulding, 4mm thk veneer of aprroved colour and shade, with 6mm thk corain table top,as per design with all required fittings and fixtures as directed by engineer in charge or architect. 39 providing and fixing in position main cabin side table of size 1.5MX0.45M in 18mm thk marine plywood with internally 1mm thk liner laminates and externally with t.w. moulding, 4mm thk veneer of aprroved colour and shade, with 6mm thk corain table top,as per design with all required fittings and fixtures as directed by engineer in charge or architect. 40 providing and fixing in position main cabin back side table of size 3.00MX0.45M in 18mm thk marine plywood with internally 1mm thk liner laminates and externally with t.w. moulding, 4mm thk veneer of aprroved colour and shade, with 6mm thk corain table top,as per design with all required fittings and fixtures as directed by engineer in charge or architect. 41 providing and fixing in position PA cabin table 2 nos. of size 1.80MX0.75M in 18mm thk marine plywood with internally 1mm thk liner laminates and externally with t.w. moulding, 4mm thk veneer of aprroved colour and shade, with 6mm thk corain table top,as per design with all required fittings and fixtures as directed by engineer in charge or architect. 42 providing and fixing in position PA cabin side table of size 1.2MX0.45M in 18mm thk marine plywood with internally 1mm thk liner laminates and externally with t.w. moulding, 4mm thk veneer of aprroved colour and shade, with 6mm thk corain table top,as per design with all required fittings and fixtures as directed by engineer in charge or architect. 43 providing and fixing large height file storage cupboards in wall with 18mm thk IS 303 Grade Boiling water resistant plywood of approved make for bottom, top, verticals, shelves and shuttes and 12 mm thick Boiling Water Resistant plywood IS303 grade of approved make for back side. 19mmx10mm t.w. lipping for all exposed faces of plywood with melamine polish with french polish. external faces of plywood with 1mm thick corian laminates and internal faces of plywood to be finished with 0.80mm thick liner laminate.all necessary hardwares like sliding channels and sliding door fitting soft close, with rose gold finish concealed handles with required size as per design and directed by engineer in charge or architect. 44 Providing and Fixing Channelled perforated panels of width 192 milimetre, thickness of 15 milimetre and length 2400 milimetre, made of a Moisture resistant fibre board substrate with a laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood and Mystique Walnut, Interior White, Alumina Pearl) and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the reverse surface has a Helmholtz fluted perforation with consecutive three milimetre wide groove followed by 13 milimetre or 21 milimetre of visible pane (G- 13/ G-21). The edges of the panel shall be tongue-andgrooved to fix special clips for installation and seamless visual. The back of the perforated panel shall have sound absorbing non-woven Soundtex acoustical fleece hot pressed to achieve NRC of 0.5. for G-21 and 0.6 for G-13. (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 and Humidity Resistance (RH) of 70 percent with camber limit less than one milimetre / 1000 milimetre and bow less than one milimetre / 300 milimetre. The panels shall be mounted on special aluminium splines (keel) using inside clips provided by Manufacturer and approved by the Architect/ Engineer-in-Charge. Installation: An appropriate vapour barrier (by others) shall be applied / installed on the vertical surface before the installation to properly seal against entry of any moisture. Vapour barrier (by others) shall be installed as per Manufacturer‘s recommendation. Install wooden batten grid (provided by others) of section 50 milimetre X 50 milimetre or as approved by the Architect on the solid wall / partition to provide level and plumb surface for fixing Keel. Install Keel vertically using screws and plugs at spacing of not more than 600 milimetre center-to-centre. The first and last keel should not be more than 150mm from the ends. Trim the tongue of the first bottom panel and install using headless nail with groove side upward. Subsequent panels are installed with tongue side downward by engaging with each other using tongue and groove mechanism and secured by inside clip. Continue this process until required height is achieved. Shorter butt edges need to be joined using industrial/wood glue. The keel shall also be used for transition of the butt end of adjacent panel at every 7.2 metre. Install the Skirting (provided by others) of width 50 milimetre or more as required by the Architect/ Engineer-in- Charge. Finish off the edges using wooden moulding of matching colour (by others). Installation should be carried out as per Manufacturer recommended procedure. Providing and fixing sofa set 3+1+1 brown and cream leather Dimensions - length 182.5 centimetre, breadth 100 centimetre, height 100 centimetre, weight - 66 kg. Seating capacity - five seat. providing and supplying Office sofa 2 Seater made of frame covering partially upholstered, covering material for seat and back rest-leatherite, frame stucture -wood of minimum 25mm thickness ,seat cushion material-40 density foam, length of seat-1220mm, depth of sofa -530mm, height with back cushion-750mm, arm width 120mm, and height-550mm, seat height-475mm sofa leg height-50mm, seat cushion lenght- 710mm, width -510mm, thickness-100mm thickness of foam- 76mm. ( before execution sample should be got approved from engineer in charge.) Tea Table 900mm X 750mm X 450mm for m.s. ante chamber Providing And Fixing Of Tea Table 900mm X 750mm X 450mm With 12mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm ThikVeneer Or 1 Mm Thik Mica Etc Providing and arrangemnt of high back chair, synchronized mechanism with multiple locking, adjustable armrest, gaslift for seat height adjustment, standard 5-prong P/Nylon base with leatherite upholstery. Providing and arrangemnt of high back chair, tilt mechanism with multilocking, high density cushion on seat, composite leather with metalic silver finish base and arms with polyurethene castors, gaslift for height adjustment. providing and fixing wooden chairs with arms with cotton fabric finish etc. complete for visitors 51 Providing and fixing vertical blinds of approved make and shade of 100 milimetre regular fabric with powder coated aluminium channel with telting polyvinyl chloride chain and bottom weight plate with all necessary fixtures and fitting, excetra complete. 52 Providing and fixing rollar blinds of approved make and shade of 38 milimetre round aluminium channel with blackout fabric and telting with chain (ball) system with all necessary fixtures and fitting, excetra complete. 53 Providing and arrangemnt of mid back chair, normal synchronized mechanism, fixed armrest, gaslift for seat height adjustment, standard 5-prong nylon base with leather upholstery. 54 Providing and fixing 3 seater public seating chair made complete metal with Legs in Crome finish and seates in silver powder coating finish. 55 Providing and fixing in position Phenol bonded Bamboowood wall cladding at all height with planks of sizes 10 milimetre thick, 1900 milimetre length (minimum) and 135 milimetre wide approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials and Technology Promotion Council (BMTPC) with necessary profiled edges fixed with BR nails to frame work made of second class teak wood of size 50 milimetre X 50 milimetre in center and ends of each tile. The bamboowood cladding shall be laid over glass wool of 50 milimetre thickness filled in between two teak wood frame and hold in place by 50 milimetre thick teak wood placed center of two teak wood and covered with mesh (rabbit) fixed to teak woodframe work with wire nails as backlayment and covered with 1.00 milimetre thick expanded poly ethylene foam of density 25 kilogram per cubic metre in two layers first layer on wall surface before fixing wooden frame and second layer on frame under cladding. The Bamboowood planks shall have minimum density of 1000 kilogram per cubic metre and minimum Hardness 1000 Kilogramforce with Eco friendly ultra violet coating, all complete as per direction of Engineer in-charge. (For Ground Floor) 56 Providing and fixing Indian Standards Institute marked double swing flush door shutters conforming to Indian Standard : 2202 (Part I) Non-decorative type, core of block board construction with frame of first class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 milimetre thick including Indian Standards Institute marked stainless steel L-hinges with necessary screws, fittings and fixtures per leaf, stainless steel kick plates on both sides of the door of 300 milimetre height, heavy duty satin finish butt stainless steel Hinges (100 milimetre X 75 milimetre X 3 milimetre in size) 4 Nos., stainless steel finished lever handle with mortise lock 1 No., floor spring 1 No., 100 milimetre X 100 milimetre safety glass at the specified location. (For First Floor) 57 Providing and fixing in position, single shuttered aluminium extruded powder coated openable door of overall size 0.90 metre X 2.40 metre with aluminium door frame of powder coated section 101.60 milimetre X 44.75 milimetre, 3.18 milimetre thick and shutter comprising of powder coated section having bottom and lock rail of size 150 milimetre X 44.5 milimetre X 3.00 milimetre thick top rails 47.62 X 44.45 milimetre X 3.00 milimetre thick, vertical style 47.62 X 44.45 milimetre, 3.00 milimetre thick and for shutter plain glass panes 5 milimetre thick for top panels and 12 milimetre thick both side laminated phenol bonded particle board panels for bottom panels, excetra, Indian Standards Institute mark, with bijagiri having heavy duty concealed lock, necessary beading, glazing clips, polyvinyl chloride gaskets, 250 milimetre length tower bolts, 150 milimetre diameter pad handle, excetra as per detailed design and drawing or as directed by engineer in charge including all materials, labours and equipment, excetra complete. (For First Floor) 58 Providing and fixing conference main table of size 3600 milimetre long X 1400 milimetre depth X 750 milimetre height, made up of 18 + 18 milimetre thick MDF top with polyvinyl chloride membrane finish and waterfall edge profile. Aluminium anodizied finish beeding of 4 milimetre thich is running all over the table top edge. Gable ends is aerofoiled shape with front edges in polyvinyl chloride membrane finish and rest in prelaminated MDF with batton structure. Gable ends should be hollow from inside for the provision of passing electrical and data wiring. Modesty panel to be made of 18 milimetre thick prelaminated particle board with polyvinyl chloride edge band. Access flap for wire manager 2 Nos. 59 Providing and fixing dressing table of size 400 milimetre long X 400 milimetre depth X 1800 milimetre height. The dressing table unit is made up of 18 milimetre thick prelam particle board with both side decorative laminate. All exposed edges are sealed with 2 milimetre thick polyvinyl chloride edge banding. The unit has one drawer and one shelf. The dressing table has a mirror of 4 milimetre thick pasted on 18 milimetre thick prelm particle board attached to the base unit. The mirror size considered is 1155 milimetre X 360 milimetre X 4 milimetre thick. The mirror has been pasted using high quality 3M sticker. 60 Providing and fixing wardrobe with mirror of size 900 milimetre long X 600 milimetre depth X 1965 milimetre height. The wardrobe side panels and doors are made up of 18 milimetre thick prelam particle board with both side decorative laminate. All exposed edges are sealed with 2 milimetre thick polyvinyl chloride edge banding. The shelves are made of 18 milimetre thick prelam particle board with decorative laminate on both sides. The top is made of 36 milimetre prelam particle board with decorative laminate on both sides. (18 milimetre prelam particle board and 18 milimetre batons on all sides to achieve 36 milimetre overall thickness). The exposed edges of the top are sealed with 2 milimetre thick polyvinyl chloride edge banding. The top most part of the wardrobe has an aluminum hanger rod of approved make. One drawer of size 400 milimetre width X 150 milimetre height X 450 depth made of 18 milimetre thick prelam particle board has been considered. The drawer will have a multipurpose lock of approved premium make. The wardrobe handles are Satin stainless steel finish of 160 milimetre pitch. The wardrobe has a multipurpose lock of approved make. All hinges considered are approved make. Necessary good quality hardwares have been considered as required. 61 Providing and fixing stainless steel kitchen trolley of overall 26 inch height and 22 inch depth, supported on aluminium pipes, trolley basket made out of 5 milimetre stainless steel rod fitted on telescopic channel of size 1.5 inch X 20 inch X 22 inch on both sides of trolley of 12 inch or above size, panel having 40 kilogram load bearing capacity of trolley made out of 20 milimetre polyvinyl chloride coated plywood and colour combination as directed by Engineer in-charge. Inner side of panel covered by white mica, 100 milimetre stainless steel decorative handle. (The width and height of individual compartments shall be kept as directed by Engineer in-charge). 62 Labour Charges For Mazdoor unskilled light male at the site of work for help of carpenter and cleaning work etc complete. 63 Providng and fixing in position anodised extruded aluminum partitions, partly glazed and partly laminated having frame made out of extruded tubular section of size 40 milimetre X 60 milimetre with 12 milimetre thick three layered flat pressed teak wood particle board bonded with boiling water proof type exterior grade phenol formaldehyde synthetic resin conforming to Indian Standard : 12823-1990, laminated on both sides, Novateak or equivalent and 5 milimetre thick selected quality plain / float glass panels fixed with aluminum glass clips 12 milimetre X 12 milimetre and rubber cushioning beading to glass partitions as per approved drawing, excetra compete. (For First Floor) 64 Labour Charges For Carpenter Second Class Skilled At site Of work For Dismentalling Wooden doors, Cupboards etc complete 65 Royalty charges for various building construction bonafied materials which are used for government bonafied works and for which Royalty charges are to be paid by the contractor. (This Item is to be paid to the contractor only after he pays the Royalty amount to Revenue department and produces the required voucher.) Laboratory testing charges for various materials required for items of work, on the basis of testing frequency and charges fixed by Vigilence and Quality Control Circle, Pune. 66 Fineness Modulus (Sieve Analysis), Silt and Clay Content Test for Artificial Sand 67 Standard Consistancy, Fineness, Specific Gravity, Setting Time (Initial and Final), Compressive Strength, Soundness Test for Cement 68 Compressive Strength of Cement Mortar 69 Compressive Strength of Cement Concrete Cube 70 Sieve Analysis Test for Metal below 40 milimetre 71 Water Absorption, Specific Gravity, Impact Value, Crushing Value Test for Metal below 40 milimetre 72 Water Absorption, Compressive Strength, Efflorescence Test for Burnt Bricks 73 Water Absorption, Modulus of Rupture Test for Ceramic / Vitrified Tiles 74 Tensile Strength, Percent Elongation, Yield Stress, Weight per Metre, Bend / Rebend Test, Proof Stress (Steel Bar upto 16 milimetre) 75 Tensile Strength, Percent Elongation, Yield Stress, Weight per Metre, Bend / Rebend Test, Proof Stress (Steel Bar above 16 milimetre) 76 Thickness, Mass per Running Metre of Aluminium Section 77 Density, Moisture Content for Wood
