Purchase Of Furniture And Fixtures And Construction Work Of The Kund And Interlock Road In The Community Library At Village Ujjwalwas In Panchayat Samiti Nohar- 1. Excavation of earth up to a depth of 1.5 meters in foundations, trenches, and drains, compacting the bottom, watering, dressing the sides, removing excavated earth, backfilling the excavated areas after filling the foundation, and disposing of the remaining earth up to a distance of 50 meters.2. Laying and compacting cement concrete in foundations or floors with 40 mm nominal size stone aggregate (crusher broken)/brick aggregate mixed with cement-sand mortar in a 1 cement: 5 sand: 10 aggregate ratio, including curing.3. First-class brick masonry in foundations and plinth in 1:6 cement mortar, including closing of side joints and curing.4. First-class brick masonry in superstructure in 1:6 cement mortar, including closing of side joints and curing.5. Cement plaster on walls in 1:4 ratio of cement-sand mortar, including raking of joints and regular curing for 14 days.6. Cement plaster on walls in 1:6 ratio of cement-sand mortar, including raking of joints and regular curing for 14 days.7. Laying and supplying reinforced cement concrete of 1:2:4/1:1.5:3 mix, including placing in roof slabs, chajjas, beams, lintels, etc., compacting, curing, and leveling the surface with 1:3 cement mortar, etc., including scaffolding, but excluding the cost of steel and shuttering.8. Cutting, bending, placing, and tying of steel reinforcement for RCC work, including supply. 9. Supplying and fixing 9 white, glossy ceramic tiles on plaster with cement slurry and filling the joints with white cement (cost of plaster not included).10. Constructing RC rings 5 cm thick and 38 cm high with 1:2:4 cement concrete and installing them in the well, including forming the mold with 3 rods of 6 mm diameter in a circular pattern and vertical binding at 7.5 cm center-to-center distance. Later, making holes for water seepage.11. Supplying and fixing a two-leaf door made of 22 gauge plain GI sheet in an outer frame of 40x40x3 mm angle iron and an inner frame of 25x25x3 mm angle iron, including fittings such as sliding bolt, latch, and handle plates, etc.12. Iron work in grills/gates etc., including cutting, bending, and fixing of flat, angle, T, and channel iron.13. Supplying and fixing 14 mesh, 24 gauge iron wire mesh in iron windows and fastening with screws along with 20 x 3 mm beading.14. Applying enamel paint in 3 coats to give an even shade on new/old work and creating a smooth surface.15. Indian white vitreous china water closet (WC) size 530x410 mm.16. 1.5 sq mm wiring for light point/fan point/exhaust fan point/call bell point. Medium-grade PVC conduit wiring on the surface/recessed as required, including modular switches, modular plates, suitable GI boxes, and earthing with 1.5 sq. mm FR PVC insulated copper conductor single core cable.17 WALL PUTTY18 PLASTIC PAINT19 Interlock 60 mm20 FALSE CEILING21 WALL PANELLING22 MAT FLOORING23 TABLE24 PLASTIC CHAIR OF ALUMINIUM PIPE WITH ARM25 PANEL LIGHT 6 x 4 INCH26 INTERNET CONNECTION WITH MODEM27 DOUBLE BATTERY INVERTER28 KUND DHAKKAN IRON29 WATER TANK 500 LITER30 WASH BASIN WITH FITTINGS AND ALL ACCESSORIES31 CISTERN SUPPLY WITH FITTINGS AND ALL ACCESSORIES 10 LITER32 MOTOR PUMP 0.50 HP33 Providing and removing centering and shuttering (planking and propping) for casting RCC roof, slab, chajja, lintel, etc., up to a height of 4.5 meters, etc., as per specifications.34 Pipe elbow t joint sanitary and light fitting other charges etc.
