|
| 1 | Taking up or down 15mm bore steel water tubing and connections including removal complete all as specified and as directed by Engr-in-charge. |
| 2 | Taking up or down 20mm bore steel water tubing and connections including removal complete all as specified and as directed by Engr-in-charge. |
| 3 | Taking up or down 25mm bore steel water tubing and connections including removal complete all as specified and as directed by Engr-in-charge. |
| 4 | S&F 15mm dia UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe with all fittings complete all as specified and as directed by Engr-in-charge. |
| 5 | S&F 20mm dia UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe with all fittings complete all as specified and as directed by Engr-in-charge. |
| 6 | S&F 25mm dia UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe with all fittings complete all as specified and as directed by Engr-in-charge. |
| 7 | S&F 15mm Tubes, \"medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors. |
| 8 | S&F 20mm Tubes, \"medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors. |
| 9 | S&F 25mm Tubes, \"medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors. |
| 10 | Dismantling PVC water tank of capacity exc 250 Ltrs and n.exc 500 ltrs and removing complete all as specified and as directed by Engr-in-charge. |
| 11 | Dismantling PVC water tank of capacity exc 500 and n.exc 1000 ltrs and removing complete all as specified and as directed by Engr-in-charge. |
| 12 | Dismantling PVC water tank of capacity exc 1000 and n.exc 2000 ltrs and removing complete all as specified and as directed by Engr-in-charge. |
| 13 | S & F 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Part I |
| 14 | S & F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Part I.Make: Prayag or equivalent model. |
| 15 | S & F 2000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Part I.Make: Prayag or equivalent model. |
| 16 | S & F for 25mm dia ball cock with epoxy coated Al rod and HD ballcomplete all as specified and as directed by Engr-in-charge.Make: Prayag or equivalent model. |
| 17 | S & F in repairs for 20mm dia ball cock with epoxy coated Al rod and HD ballcomplete all as specified and as directed by Engr-in-charge.Make: Prayag or equivalent model. |
| 18 | S & F in repairs for 25mm dia ball cock with epoxy coated Al rod and HD ballcomplete all as specified and as directed by Engr-in-charge.Make: Prayag or equivalent model. |
| 19 | S & F in repairs flexible PVC waste pipe suitable for wash hand basin and Kitchen Sink all as specified and as directed.Make: Prayag or equivalent model. |
| 20 | S & F in repairs PVC connection 15mm size PTMT nuts length 450mm complete all as specified and as directed by Engr-in-charge.Make: Prayag or equivalent model. |
| 21 | S & F in repairs stainless steel sink with drainage board made out of 1mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets connecting union overall size 914x460x203mm with bowl size 405x354x203mm fixed complete all as per Cat No 1239D of Prayag or equivalent as specified and as directed by Engr-in-charge.Make: Prayag /Blue star. |
| 22 | S & F in repairs Bib tap 15 mm bore, brass, chromium plated, with crutch or butterflyhandle conforming to IS as per Cat No.CON-037KN of Jaquar or ESSCO or G1404A1 of Parryware or equivalent of KOHLER screwed down, screwedfor iron pipes or for brass ferrule complete all as specified and as directed. |
| 23 | S & F in repairs Angular stop cock 15mm bore, brass, chromium plated,conforming to IS as per Cat No.CON-053KN of Jaquar or ESSCO or G3053A1 of Parryware orequivalent of KOHLER , screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed. |
| 24 | S & F in repairs Pillar tap 15 mm bore, brass with capstan heads, chromium plated, long Neck with aerator conforming to IS as per Cat No.CON-021KN of Jaquar or ESSCO or G2402A1 of Parryware or equivalent of KOHLER, screwed down high pressure with long screwed shanks and fly nuts, screwedfor iron pipes or for brass ferrule etc., complete all as specified and as directed. |
| 25 | S & F Over head shower rose with arms, ABS body chromium plated with revolving joint and 125 mm dia round shaped single flow with rubit cleaning system all as per Cat No.OHS-1989 of Jaquar or equivalent of CERA / ESSCO/Parryware / Kohlerall as specified anddirected. |
| 26 | S & F in repairs stainless steel grating doom 100mm dia complete all as specified and as directed by Engr-in-charge. Make:Prayag/Parryware/Johnson/ Kohler/Marc |
| 27 | S & F in repairs looking mirror 600x450mm bevelled edgeselected quality glass, mounted on 6mm thick commercial ply, aluminium frame around and fixed to wooden plug with CP brass screws and cup washers complete all as specified and as directed. |
| 28 | S & F in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps waste chain and plug and porcelain stopper but including brackets waste fitting brass chromium plated 32mm dia with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed etc complete all as specified and as directed by Engr-in-charge.Make: Parryware /Essco/Jaquar/CERA. |
| 29 | S & F in repair water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap 100mm dia front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) (rate also include for taking off unhygienic of WC).Make: Parryware /Essco/Jaquar/CERA. |
| 30 | S & F in repairs vitreous china wash down water closet pedestal pattern white including trap connections to drain and to flush pipe anti-syphonic pipe etc., complete all as specified and as directed by Engr-in-charge. |
| 31 | S & F in repairs PVC valveless, syphonic action, flushing cistern low level 10 ltrs capacity, white with inlet ball valve float and handle including brackets and flush pipe of polyethylene of low or high quailty PVC 32mm dia complete all as specified and as directed by Engr-in-charge.Make: Parryware /Essco/Jaquar/CERA. |
| 32 | Supply and fix for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc., of 110mm dia complete all as specified and as directed. |
| 33 | All as per item No.32 here-in-before but 75mm bore. |
| 34 | Supply and fix for PVC (SWR) bends/ shoes with Access door any radius of 110mm dia complete all as specified and as directed. |
| 35 | All as per item No.34 above but 75mm bore. |
| 36 | Supply and fix for PVC (SWR) (Single T) any radius provided with access door of 110mm dia complete all as specified and as directed. |
| 37 | All as per item No. 36 above but 75mm bore. |
| 38 | Supply and fix for PVC (SWR) branch pieces, single Y (equal or un equal), ordinary or inverted (spigot or socket type) or with parralled branches of 110mm dia with access door complete all as specified and as directed. |
| 39 | All as per item No.38 above but 75mm bore. |
| 40 | Supply and fix for PVC (SWR) branch pieces, double Y (equal or un equal), ordinary or inverted (spigot or socket type) or with parralled branches of 110mm dia with access door complete all as specified and as directed. |
| 41 | All as per item No. 40 above but 75mm bore. |
| 42 | Supply and fix for 110mm PVC (SWR) vent cowl complete all as specified and as directed. |
| 43 | All as per item No. 42 above but 75mm bore. |
| 44 | S&F in repairs 15mm bore Bib tap of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms) complete all as specified and as directed by Engr-in-charge.Make: Prayag or equivalent model. |
| 45 | S&F in repairs15mm borePillar taps ofPTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-110gms) complete all as specified and as directed by Engr-in-charge.Make: Prayag or equivalent model. |
| 46 | S & F in repairs stainless steel grating doom 100mm dia complete all as specified and as directed by Engr-in-charge. Make:Prayag/Parryware/Johnson/ Kohler/Marc |
| 47 | S&F In repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified complete all as specified and directed. |
| 48 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbishremoved outside the Defence landcomplete all as specified. |
| 49 | M & L for plain cement concrete type B2 1:2:4 (using 20 mm graded aggregate) Cement concrete in foundations, filling and mass concrete, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars, posts etc...complete all as specified and directed. |
| 50 | M & L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed by Engr-in-charge. |
| 51 | M & L forGlazed Cereamic tiles on vertical surfaces 300 x 450 mm size over 10mm thick screed with neat cement slurry of CM 1:3. |
| 52 | Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms of 25 mm thickand like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 53 | Material and labour for light shade vitrified ceramic coloured tiles10mm thick (square/ rectangular) polished area of each tile n.exc 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and as directed by Engr-in-charge. |
| 54 | All as per item No.53 here-in-before but on vertical surfaces over 10mm thick screed plaster in CM 1:4. |
| 55 | Taking down chowkats or frames of any description with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm but n exc 4 sqm each all as specified and as directed and making good the disturbed plastered surfaces with 10 mm plaster in CM 1:6 and final finish as per existing. |
| 56 | Taking down chowkats or frames of any description with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each all as specified and as directed and making good the disturbed plastered surfaces with 10 mm plaster in CM 1:6 and final finish as per existing. |
| 57 | Supply and fix powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc. complete all as specified and as directed. |
| 58 | Supply and fix powder coated anodised sliding/hung type aluminium door, window and ventilator shutters (minimum thickness of powder coating 50 micron), without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2Nos) suitable handle (1 No), aluminium tower bolt 100 mm (1No)etc. complete all as specified and as directed |
| 59 | S & F powder coated anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15 and minimum thickness of powder coating 50 micron) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised luminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. |
| 60 | S & F 4mm thick sheet glass, ordinary quality and glazing with rubber beading around the glass, in squares n exc 0.50 sqm in each pane complete all as specified and as directed. |
| 61 | Supply and fix Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed |
| 62 | M & L for complete removal of existing treatment from old decorated plastered surfaces by Vacuum based sanding machine, removal of nails, moulds, moss and efflorescent etc & filling cracks/hole with putty as required and applying wall care putty upto 1mm thick (Multipurpose mixer shall be used for uniform and propper mixing of putty) and two coats of Oil Bound Distember white or tinted over one coat primer with roller application complete all as specified and as directed by Engr - in - Charge. |
| 63 | Taking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of wall, floors, etc. all as specified and as directed. |
| 64 | Material and labour point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copperconductor wire drawn intoexistingconcealedconduit including provision of 1.5Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following point wiring :- Make of cable : Plaza/Polycab/Finolex/ Havells |
| 65 | One light/ fan/ exhaust fan/ 3 pin socket independent board/ buzzer point controlled by one switch. |
| 66 | One 3 pin socket outlet 5 Amps,same boardwith cables 1.5 Sqmm size. |
| 67 | One light point controlled by two 2- way switches, with cable 1.5 Sqmm size. |
| 68 | All as per item ser no-64 above here in before but one 3 pin socket outlet 5/15 Amps, indipendentboard/AC/ Geyser with cables 4.0 Sqmm size.Make :- Polycab/Finolex/Plaza/Havells |
| 69 | Material and labour point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copperconductor drawn into including PVC casing & caping/fixed on wall/roof/ceiling etc of size not less than 20 mm diaincluding provision of 1.5Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following :- Make for PVC casing & caping: SUDHAKAR / AVON PLAST /PLAZA , Make for Copper cable: Finolex/Polycab / Plaza. |
| 70 | One light point controlled by one switch. |
| 71 | One 3 pin socket outlet 5 Amps, indipendentboardwith cables 1.5 Sqmm size. |
| 72 | All as per item ser no-66 above here in before but one 3 pin socket outlet 5/15 Amps, indipendentboard/AC/Geyser with cables 4.0 Sqmm size. Make :- Polycab/Finolex/Plaza |
| 73 | M&L for sub main wiring for phase and neutral with PVC FRLS insulated unsheathed multi stranded along with earth wire FRLS PVC insulted copper conductor, single core cable in and including surface/concealed /PVC conduit of appropriate size as specified for the following sizes. Note:- : 1. Cutting chases for concealed wiring shall be measured and paid seperately. 2. Rates are including taking down old unserviceable. Make for Copper cables: Finolex/Polycab / Plaza/ Havells. Make of PVC Conduit: SUDHAKAR/FINOLEX/AVON PLAST. |
| 74 | 2x 4.0 sqmm and 1x 4.0 sqmm as earth wire |
| 75 | 2x 6.0 sqmm and 1x 6.0 sqmm as earth wire |
| 76 | 2x 10.0 sqmm and 1x 10.0 sqmm as earth wire |
| 77 | 4x 10.0 sqmm and 2x 10.0 sqmm as earth wire |
| 78 | 4x 16.0 sqmm and 2x 16.0 sqmm as earth wire |
| 79 | 4x 25.0 sqmm and 2x 25.0 sqmm as earth wire |
| 80 | S&F in repair for switch piano, flush type single pole , one way 6 amp including repairing/replcement of switch board if broken complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader |
| 81 | S&F in repair for switch socket combination 2 in 1, 5 pin, 6 Amp flush typeincluding repairing/replcement of switch board if broken complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader |
| 82 | S&F in repair for socket outlet 5 pin,6 amp complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader |
| 83 | S&F in repair for socket outlet 6 pin,16 amp complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader |
| 84 | S&F in repair for bell push flush type, 6 Ampcomplete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader |
| 85 | S&F in repair for switch piano, flush type single pole , two way 6 ampincluding repairing/replcement of switch board if broken complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader |
| 86 | S&Fin repair for switch socket combination 2 in 1, 6 pin, 6 and 16 Amp flush type universalincluding repairing/replcement of switch board if broken complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader |
| 87 | S & Fin repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc and including taking down old all as specified and as directed by Engr-in-Charge . Make: Anchor/Cona/Leader/Lisha. |
| 88 | Taking down existing rusted switch board sunken box from site including removing fixtures and fittings such as switch, socket fan regulator complete, removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces necessary plaster, white wash matches with existing colour of wall, floors, etc. all as specified and as directed. |
| 89 | Supply and fixing in repair of GImetal flush box suitable for mounting moduler plate of following modules:- |
| 90 | 1 or 2 Module |
| 91 | 3 Module |
| 92 | 4 Module |
| 93 | 6 Module |
| 94 | 8 Module |
| 95 | 12 Module |
| 96 | Supply and fixingin repair of combined both frame and cover plates fixing on mounting boxes for following modules:- |
| 97 | Cover plate with frame 1 Module |
| 98 | Cover plate with frame,2 Module |
| 99 | Cover plate with frame,3 Module |
| 100 | Cover plate with frame,4 Module |
| 101 | Cover plate with frame,6 Module |
| 102 | Cover plate with frame,8 Module |
| 103 | Cover plate with frame,12 Module |
| 104 | Supply and fixing in repair ofmodular switch one way 6A white Active one module all as specified and as directed by the Engineer-in-Charge |
| 105 | Supply and fixing in repair ofmodular switch socket combination 16 A, 6 pin 3 module flush type Active white two module complete all as specified and as directed by the Engineer-in-Charge .Make: Havells(Crabtree)/Legrand/Plaza. |
| 106 | Supply and fixing in repair ofmodular switch socket combination 6 Amp, 5 pin flush type Active white two module complete all as specified and as directed by the Engineer-in-Charge.Make: Havells(Crabtree)/Legrand/Plaza. |
| 107 | Supply and fixing in repair ofmodular fan step regulator,120 W-2 module all as specified and as directed by the Engineer-in-Charge.Make: Havells(Crabtree)/Legrand/Plaza. |
| 108 | Supply and fixing in repair ofmodular socket 6A, 3 pin combined two module all as specified and as directed by the Engineer-in-Charge |
| 109 | Supply and fixing in repair ofmodular socket 16A, 3 pin combined two module all as specified and as directed by the Engineer-in-Charge |
| 110 | Supply and fixing in repair modular bell push 6Aone module complete all as specified and as directed. |
| 111 | Supply and fix Eco compact wall mounted LED batten for T8LED tube CAT CROMPTON DIJB12LT8-20 with ULTRONhigh efficency LED polycarbonate tube with in built driver and metal heat sink 18 watt icluding taking down old unserviceable fittings all as specified and as directed by Engr-in-Charge.Make : Crompton LT8-20-865(2) /philips/wipro/Havells. |
| 112 | Supply and fix high efficiency wall mountedLED batten type polycarbonate tube of 9W 2 ft LED and including taking down old unserviceable fittings all as specified and as directed by Engr-in-Charge .Make : Havells LHEXACP7IN1W010or equivalent model of Philips/Crompton/wipro/ Surya. |
| 113 | Supply and fix Energy savingnot less than 25 Watts LED light fitting ,IP65 powder coated pressure die cast aluminium high power street light with heatresisant toughened glass with lens by providingGI pipe medium grade 25 mm dia 1.5 Mtrin length with suitable size MS Clamp two nos made out of 25x3 mm FI incl two coat of synthetic enamel paint over a coat of red oxide primer, prewired and including connecting up with 3 core flexible copper conductor cable of 1.5 Sqmm from ceiling rose to fitting and including taking down old u/s damagedall as specified. Make Surya/Havells/Philips/CROMPTON. |
| 114 | S&F sheet metal enclosurevertical TPN DB 8 way double door with spreader terminals,insulating phase barrier and hardware with neccesary arrangements all as specified and directed Note :-(i) Including taking down old u/s DB, MCCB and MCB\"s (ii) MCCBs and MCBs shall be measured and paid separetly under the respective item of shedule. Make : Legrand/ Siemens/Scheneider/ABB. |
| 115 | S&F MCB,DB SPN 12 waydouble door DB with 200 amps rated copper bus barin SS enclosure double door type. Note : MCB SPN/SP shall be measured and paid under the respective item of the schedule.Make: Legrand/ Siemens/Scheneider/ABB. |
| 116 | S&F MCB,DB SPN 08 waydouble door DB with 200 amps rated copper bus barin SS enclosure double door type. Note : MCB SPN/SP shall be measured and paid under the respective item of the schedule. Make: Legrand/ Siemens/Scheneider/ABB. |
| 117 | S&F MCB,DB SPN 04 waydouble door DB with 200 amps rated copper bus barin SS enclosure double door type. Note : MCB SPN/SP shall be measured and paid under the respective item of the schedule.Make: Legrand/ Siemens/Scheneider/ABB. |
| 118 | S&F MCB,DB SPN 02 way in SS enclosure type. Note : MCB SPN/SP shall be measured and paid under the respective item of the schedule.Make: Legrand/ Siemens/Scheneider/ABB. |
| 119 | Supply and fix for MCB TP 415 V,40-63 Amps with breaking capacity 10KA B curve complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB Note : Including taking down old unserviceable. |
| 120 | Supply and fix in repair for MCB TPN 415 V,63-100 Amps with breaking capacity 10KA C curve complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABBNote : Including taking down old unserviceable. |
| 121 | Supply and fix for MCB SPN 230 V, 40-63 Amps with breaking capacity 10KA B curve complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABBNote : Including taking down old unserviceable. |
| 122 | Supply and fix for MCB SP 230 V, 6-32 Amps with breaking capacity 10KA B curve complete all as specified and as directed by Engr-in-chargeMake: Legrand/ Siemens/Scheneider/ABBNote : Including taking down old unserviceable. |
| 123 | S& F forsheet metal enclosure double pole and neutral with a three pin and earth plug and socket complete withoneSP MCB 25-32 Amps. Make: Legrand/ Siemens/Scheneider/ABB |
| 124 | S& F forsheet metal enclosure triple pole and earth encolsure with a two pin and earth plug and socket complete withoneTP MCB 63-100 Amps. Make: Legrand/ Siemens/Scheneider/ABB |
| 125 | Material and labour for Earthing complete with GI earth plate electrode of size 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below ground level , with top edge of the earth plate at a depth of not less than 1.5 mtr below ground level connected with and incl GI earth wire 4mm dia including alternate 5 layersof charcoal, salt crystal and including 15 mm dia GI pipe light grade by means of nuts, bolts, washers and necessary earth work upto 7.5 mtr and connecting to test point, LT Switchgear etc as per site requirement including necessary excavation, earth work in any type of soil, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC Cover with 6 mm dia MS bars 10 cm C/C on both ways as reinforcement complete all as shown in elecrical plate No 3 of SSR Pt- I including testing on completion complete all as specified and as directed. Note:(i) Quoted rate deemend to include necessary earth work PCC chamber, RCC cover, reinforcement, removal of surplus soil , site clearance etc. |
| 126 | M&L for GI Pipe15 mm light grade galvanised, with all fitting laid in trenches all as specified and directed |
| 127 | M&L for cutting chases on brick walls concrete surfaces not exc10cm girth and making good in cement mortar (1:3) the existing surfaceafter carryiing out the concealed wiring including necessary finishesall as directedby Engr in charge. |
| 128 | Supply and fixing LED luminaire 600 mm x 600 mm, 24-30 watt, 220 V AC cool white, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 129 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC warm white colour, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 130 | S&F for Rigid PVC junction box three way 25 mm surface mounted four hole type for 5 Amp independent boardcomplete with screw not and bolt all as specified and as directed by Engr-in-Charge |
| 131 | S&F for Rigid PVC junction box three way 32mm surface mounted four hole type for 15 Amp independent boardcomplete with screw not and bolt all as specified and as directed by Engr-in-Charge |
| 132 | Supply and fix for Round recessed mounted LED panel luminire not less than 12 watts with panel and suitable for false ceilling complete all as directed by Engr-in-Charge Note:- Including taking down the existing unserviceable FTL fittings. Make: Philips/ Crompton Cat pt LCDEP-18-CDL / LSDEP-18-CDL . |
| 133 | Supply and fix for Square recessed mounted LED panel luminire not less than 12 watts with panel and suitable for false ceilling complete all as directed by Engr-in-Charge Note:- Including taking down the existing unserviceable FTL fittings. Make: Philips/ Crompton Cat pt LSDEP-15-CDL / LCDEP-15-CDL . |
| 134 | Supply and fix for round/ square recessed mounted LED panel luminire not less than 9 watts with panel and suitable for false ceilling complete all as directed by Engr-in-Charge Note:- Including taking down the existing unserviceable FTL fittings. Make: Philips/ Crompton Cat pt LCDEP-09-CDL / LSDEP-09-CDL . |
| 135 | Supply and fix BEE Rated LED Lamps 10W - B22 / E27 Crompton/Bajaj/Usha |
| 136 | Supply and fix BEE Rated LED Lamps 20W - B22 / E27 Crompton/Bajaj/Usha |
| 137 | S& F forDBOXX SRCD Protected Socket 20 A (With Steel Enclosure). |
| 138 | Supply and fix for Bell, high ouyput speaker for noticable sound, white colour,AC, 240 volts, 50 Hz, single pole. Make: Anchor, GM |
