|
| 1 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles complete all as specified and directed. |
| 2 | M & L for brick workwith old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6)complete all as specified and directed. |
| 3 | M & L for brick workwith old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed. |
| 4 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 5 | M&L for 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed. |
| 6 | M&L for 15mm thick rendering on fair faces of brick and concrete surfaces in CM (1:4),finished surfaces even and smooth without using extra cement complete all as specified and directed. |
| 7 | M&L for preparation of newly plastered surfaces of wall and applying two coats distmper oil emulsion over a coat of primer and avg 3 mm thick wall care putty complete all as specified and directed. |
| 8 | M&L for preparation of newly plastered surfaces of wall and applying two coats cement base paint over a coat of alkali resistant primer complete all as specified and directed. |
| 9 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 10 | S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed. |
| 11 | S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and directed. |
| 12 | S&F in repairs mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 13 | S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed. |
| 14 | S&F in repair Floor door stopper of aluminium alloy body and tongue, anodised, over all length of cover plate 140 mm, with hard drawn steel spring, fixed in door complete all as specified and directed. |
| 15 | S&F in repair 600 mm x 450 mm bevelled edge looking mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood & fixed to wooden plugs with chromium plated brass screws & cup washers complete all as specified and directed. |
| 16 | Taking down Chowkhats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frame)complete all as specified and directed. |
| 17 | Taking down Chowkhats or frames exc 1.50 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 18 | Taking down shutters of any description area exc 1 sqm but n.exc 2 sqm eachcomplete all as specified and directed. |
| 19 | S&F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 20 | S&F 105X60 mm size of Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate and frame filled with and including PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate complete all as specified andas directed. |
| 21 | S&F 125X60 mm size of Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate and frame filled with and including PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate complete all as specified andas directed. |
| 22 | S&F plain framed, panelled shutter 35mm thick (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces, 2nd class HW rail and style of size as per IS: 1003 (Part - I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 23 | S&F 35 mm thick, second class hardwood factory made, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc; sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 24 | All as per item No.23 above but 30mm thick window/ventilators etc are provided with stiles and rails as specified in SSR part - I, Section 8, clause 8.24 (b) and fitted to chowkats complete all as specified and directed. |
| 25 | All as per item No. 23 above but 30mm thick window/ventilators etc are provided with stiles and rails as specified in SSR part - I, Section 8, clause 8.24 (b); butdivided into squares, with plain, cham-fered or roun-ded, mitred and rebated sash bars, any numbers and fitted to chowkats complete all as specified and directed. |
| 26 | S&F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 27 | M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth & applying two coats of synthetic enamel paint (ordinary tint) over & including a coat of pink primer complete all as specified and directed. |
| 28 | S&F mild steel flat iron as in bands, straps, supports or stays for rain water, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; will ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and directed. |
| 29 | M & L for PCC 1:2:4 type B-0 using 12.5mm graded aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 30 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibers (wood powder/rice husk/wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement & screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/sqmm, modules of elasticity 900 N/sqmm & resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant & fixed in position with MS hold fast/lugs/SS dash fasteners of required dia & length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). |
| 31 | Providing & Fixing Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibers (wood powder/rice husk/wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum & screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/sqmm, modulus of elasticity 850 N/sqmm & resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter & fixing with stainless steel / Aluminium butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as per direction.(Note: stainless steel/Aluminium butt hinges and necessary S S /Aluminium screws shall be paid separately) |
| 32 | S & FFactory made solidPVC door frame of size 50 mm x 47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS square tube as specified & directed. |
| 33 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail bottom rail on either side & as gap insert for top rail & bottom rail panel ling of plain colour PVC sheet to be fittedin the M.S frame welded/sealed to the stile & rails with suitable PVC sheet beading & joined together with solvent cement specified and shown on drawing complete all as specified and directed. |
| 34 | S&Fx 100mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 35 | S&F 75mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 36 | S&F 75 mm size, butt hinges, extruded aluminum alloy with galvanised mild steel hinge pin, anodized and fixed type C-21 complete all as specified and directed. |
| 37 | S&F aluminium anodised barrel tower bolts 100mm long of extruded section complete all as specified and directed. |
| 38 | S&F aluminium anodised barrel tower bolts 150mm long of extruded section complete all as specified and directed. |
| 39 | S & F 100 mm extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed. |
| 40 | S & F 150 mm extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed. |
| 41 | S & F 300 mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed complete all as specified and directed. |
| 42 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 43 | S&F framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 44 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. |
| 45 | S & F Anodised aluminium powder coated ( minimum 50 micron thickness) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 46 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 47 | S&F 4 mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats complete all necessary items to fix with frame complete all as specified and directed. |
| 48 | S&F 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed. |
| 49 | S&F brass, 4 levers, Mortice lock, vertical type, size 100 mm complete all as specified and directed. |
| 50 | S&F in repair Aluminium (Die cast body) Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width & of weight between 36 to 60 Kg complete all as specified and directed. |
| 51 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 52 | S&F Anodised aluminium snap grid frame work for false ceiling Size of grid 605 x 605mm including Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia 40mm long complete and including materials and labours for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/ Aluminium framework with screws fixed in ceiling flat or sloping complete all as specified and directed. |
| 53 | S&F Anodised aluminium snap grid frame work for false ceiling Size of grid 605 x 605mm including Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia. 40mm long complete and including materials and labours for 2 mm thick of size 600x600mm PVC (Polyvinyl chloride) boards fixed or laid/ inserted to timber/GI/ Aluminium framework with screws fixed in ceiling flat or sloping complete all as specified and directed. |
| 54 | M&L for preparation of old decorated plastered/un-plastered surfaces of wall at any height, pillars, cornices by brooming washing, rubbing down at any height including necessary scaffolding andapplying one coat of oil bound distemper including following :- (i) Use of all scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures.(ii) Removing of nails, making good holes, cracks etc. (iii) Work in patches and narrow widths, bands, cornices, plasteres etc and cutting in edges to line where necessary. (iv) Spreading and removing coverings to doors, windows, floors, fittings etc to protect them from splashes.(v) Removing and replacing furniture, moveable cupboard, chicks, blinds etc.(vi) Cleaning of bush, shrubs, vegetation, grass, weed, saplings etc.(vii) Washing floors, cleaning glass, joinery, electric fittings,wiring etc., of drops and splashes and leaving premise, clean and tidy etc.complete all as specified and as directed. |
| 55 | M&L for preparation of old decorated plastered/un-plastered surfaces of wall at any height, pillars, cornices by brooming washing, rubbing down at any height including necessary scaffolding andapplying one coat of cement base paint including following :- (i) Use of all scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures.(ii) Removing of nails, making good holes, cracks etc. (iii) Work in patches and narrow widths, bands, cornices, plasteres etc and cutting in edges to line where necessary. (iv) Spreading and removing coverings to doors, windows, floors, fittings etc to protect them from splashes.(v) Removing and replacing furniture, moveable cupboard, chicks, blinds etc.(vi) Cleaning of bush, shrubs, vegetation, grass, weed, saplings etc.(vii) Washing floors, cleaning glass, joinery, electric fittings,wiring etc., of drops and splashes and leaving premise, clean and tidy etc.complete all as specified and as directed. |
