Furniture Work Of Reading Room At Pre. T.P. Scheme No.22 (Sarthana-Valak), F.P.No. 81 (Public Utility) In New East Zone (Sarthana), Smc (2Nd Attempt)-1 Providing & Fixing Librarian table with 18mm thick commercial plywood (Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) )with 1.0mm thick lamination sheet table top supported on 2 x 2 teakwood leg & make 3 nos. drawers 1 3 width on both side with necessary french polish hardware labour etc. as per site incharge instruction and as per drawing ( Size 4 x 2-6 x 2-6, all framing other then legs are teak wood of size 2 x 1) 2 Providing & Fixing Reading table size 8 x 4 and height 2-6 with table top 18mm thick (Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) commercial plywood with 1.0mm thick lamination sheet fitting with teakwood moulding table top supported on 3 x 3 teakwood leg & 3 x 11/2 teakwood framing top and bottom with french polish labour work hardware etc. as per site in charge instruction and as per drawing. 3 Providing & Making Wooden Cubical Reading Unit Using 18mm, 12mm thick Commercial Plywood, 1mm thick lamination, teak wood molding liping, M S Powder Coated footrest & Necessary hardware material etc. liping patti french polish finish complete respected by drawing & engineer-in charges instruction.( Plywood - saras, Kitply, uniply, Anchor, Green, Wood Stock, Everest, Euro or Century), ( Laminate - Green Laminates, Century, New Mica Make) ( Size - H 4-0 x L 8-0 x W 2-9) 4 Providing & Making Wooden Cubical Reading Unit Using 18mm, 12mm thick Commercial Plywood, 1mm thick lamination, teak wood molding liping, M S Powder Coated footrest & Necessary hardware material etc. liping patti french polish finish complete respected by drawing & engineer-in charges instruction.( Plywood - saras, Kitply, uniply, Anchor, Green, Wood Stock, Everest, Euro or Century), ( Laminate - Green Laminates, Century, New Mica Make) ( Size - H 4-0 x L 8-0 x W 5-6) 5 Providing of Other PVC Plastic Chair Length (47 cm), Width (51 cm), Height (89 cm) PVC Standard Brand chair as per directed by Architect/Engineer - in - charge 6 Providing & Fixing simple 12mm thick commercial plywood (Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) Rack of size 6 x4 and depth 1-6 5 Nos. horizontal partition, supported 2 x 1 framing with necessary french polish hardware labour etc. as per site incharge instruction and as per drawing. 7 Providing & Fixing fitting commercial 8mm thick plywood (Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) magazine stand of Size 6 x 4 with 3 x 11/ vertical supporting and adjustable lag support and horizontal simple 2 x 1 teakwood patti for magazine support with necessary french polish hardware labour etc.as per site in charges instruction and as per drawing. 8 Providing and sulppying plastic chair with cusining of High-grade 100 percent virgin polymers which ensure its longevity,Ergonomically designed plastic chair for home with a lacquered finish, heavy-duty armrest, back and seat cushion made up of velvet upholstery and PU material for maximum comfort as per selection and complete the work satisfactorily as per instruction of architect or Engineer-in charge.Basic rate chair is 2200/- per chair BRANDS :Supreme Ornate 9 Providing and fixing 2-seater LINK CHAIR with moulded foam, seat in 304 stainless steel beam: cold rolled steel arm & leg:304 stainless steel of brand as per architects selection,and complete the work satisfactorily as per instruction of architect or Engineerin charge. 10 Providing and fixing of soft board of size 1 x 1.8 Quartet White Frame Cork Board, Bulletin Display Board, Pin Board, Lightweight Board for offices with backing of wood with complete installation and mounting with other hardwares, waste of materials etc and complete the work satisfactorily as per instruction of architect or Engineer- charge. 11 Providing & fixing Powder Coated Aluminium partly glazed and partly panelled partition using medium duty sections of Hindalco,Zindal, Narmada, Banco or Equivalent approved make having section 63.50 mm x 38.10mm ( Frame-.758 kg/rmt Middle section- 0.819 Kg./rmt), Galzing Clip with 5 mm thick clear float glass approved make including all other necessary fittings and fixtures. Entire work will have to be made water proof using necessary rubber sectioned wherever required. Gaps round the frame to be filled with approved water proof sealent. Bottom portion doors both side to be covered with 12mm thick prelaminated particle board of approved make and quality and as per design. (A) Same as above but Colour anodized 12 Providing & fixing partly panel & partly glass Powder Coated Aluminium doors with aluminium section of Hindalco, Jindal , Narmada,Banco or Equivalent approved make having Poder Coated outer frame Leg Partition section of 63.50 mm x 38.10 mm having weight 1.158 kg. / R.M. shutter section having size 83.5 mm x 44.45mm ( top & bottom: 1.384 kg./rmt. and middle 1.139 kg./rmt.) door vertical 47.62mm x 44.45 mm ( vertical:0.881 kg./rmt. & top hing side:0.974 kg./mt.), Glazing Clip (Jindal Section No. 19370 Wt. 0.109 Kg./ Mt.) with 5mm thick sheet glass in acid frogting and 12 mm thick prelaminated sheet of Greenlam, Panama or archid make as approved by Engineer-incharge including fixing brass pivot, handle, lock etc.complete. (A) Same as above but Colour anodized
