Tender for E-Tender For Works Contract To Carry Out Extension Works In Central Division-- 1 EXCAVATION OF POLE PITS: 2 For pole upto 8.00m length by using JCB/Manual 3 For pole above 8.00m length by using JCB/Manual 4 In Hard Soil (common to all size of poles) 5 In rocky area (common to all size of poles) by blasting / Manual 6 Excavation of Stay pit of 4.5 to 5 depth using JCB / Manual 7 Excavation & back filling of stay pit per location - Hard rock requires blasting 8 Excavation & back filling of stay pit per location - Hard rock without blasting 9 Excavation & back filling of stay pit per location - Medium rock and dense medium rock requires blasting 10 ERECTION OF POLES AND ACCESSORIES 11 Erection of RCC, REC, PSC poles upto 8.00m length by using Crane / Manual 12 Erection of RCC, REC, PSC poles above 8.00m length by using Crane / Manual 13 Erection of metal supports above 9m / RSJ / Rail Pole/Tubular Poles 14 Erection of stay set complete with fixing up stay wire Eye, Bow, Guy Shackle, Binding etc. 15 Erection of additional Stay in the same stay rod, excluding excavation of stay pit and burial of stay rod. 16 Erection of stay set complete in the rock area by blasting 17 Replacement of stay rod only. (Including stay pit excavation & refilling & erection) 18 Replacement of guy shackle only in existing stay 19 Fixing of line materials 20 Fixing of V cross arm 3.5feet 21 Fixing of V cross arm4.5 feet 22 Fixing of V cross arm5.0 feet 23 Fixing of LT S phase cross arm 24 Fixing of LT 3 phase cross arm 25 Fixing of HT / LT Ti fitting 26 Fixing of Two Tapping cross arm per cut point upto 33 KV line including fixing of Discs,insulators and Jumpering etc.. 27 Fixing of HT PIN insulator with Pin 11 kv 28 Fixing of HT PIN insulator with Pin 22 kv 29 Fixing of HT PIN insulator with Pin 33 kv 30 Fixing of LT PIN insulator 31 Fixing of HT strain disc 11 KV 32 Fixing of HT strain disc 22 KV 33 Fixing of HT strain disc 33 KV 34 Fixing of shackle 35 Fixing of Aluminium knob 36 Fixing of HT LAS (3 Nos.) 37 Fixing of LT LAS (3 Nos.) 38 Double channel-X-Arm 39 Guarding Cross Arm 40 Tapping Channel Cross Arm 41 Fixing of open type fuse unit 42 Providing of line spacers in LT lines 1 phase 43 Providing of line spacers in LT lines 3 phase 44 Fixing of LT capacitor 45 Set right of all sizes of leaning poles 46 Resagging of lines for all sizes at cutpoint location per wire / span 47 Intergrater DT Metering Arrangements/ Whole Current Meter 48 Erection /dismantling metering set 11 KV/22 KV 49 Erection of 11/22 KV AB Switch (Horizontal) 50 Erection of 11/22 KV AB Switch (Vertical) 51 Erection of HG Fuse 52 Dismantling of line materials 53 Dismantling of Double Channel X-Arm 54 Dismantling of Guarding Cross Arm 55 Dismantling of Tapping channel x arm 56 Dismantling of 11kv PIN with insulator 57 Dismantling of 11kv Composite Disc with Mp 58 Dismantling of 22kv PIN with insulator 59 Dismantling of 22kv Composite Disc with Mp 60 Dismantling of 33 KV Pin Insulator 61 Dismantling of 33 KV Disc 62 Dismantling of 5 V-X Arm 63 Dismantling of 1372 mm (46) V-X-Arm 64 Dismantling of 1068 mm (36) V-X-Arm 65 Dismantling of H.T/L.T. T.I. Fitting 66 Dismantling of 3ph X -Arm 67 Dismantling of 1ph X -Arm 68 Dismantling of Aluminium knob 69 Dismantling of LT Shackle with Mp 70 Dismantling of LT Pin with Insulator 71 Dismantling of LT open type 72 Dismantling of Top channel 73 Dismantling of Belting channel 74 Dismantling of Bed channel 75 Dismantling of DT below 200 KVA 76 Dismantling of DT 200 KVA & above but below 500 KVA 77 Dismantling of DT 500 KVA 78 Dismantling of HT LAS (3 nos) 79 Dismantling of LT LAS (3 nos) 80 STRINGING OF CONDUCTORS: 81 Paving and stringing of conductors of sizes upto 7/2.59 mm ACSR or other equivalent conductor 82 Paving and stringing of conductors ofabove7/2.59 mm ACSR or other equivalent conductor upto 7/3.35mm ACSR or other equivalent conductor 83 Paving and stringing of conductors of one run of PVC cable line of all sizes with GI wire and reel insulator. 84 Paving and stringing of conductors of7/4.09mm ACSR or other equivalent conductor 85 Paving and stringing of conductors of7/4.72 mm Dog Conductor or other equivalent conductor 86 Releasing and reerection (resagging) of one run of all sizes of conductor 87 ERECTION OF DISTRIBUTION TRANSFORMERS: 88 Erection of Distribution Transformer structure complete as per TNEB standard including painting, feeders arrangrment, colour washing of RCC poles etc.. Fixing of poles type to be unit HT / LT LAS and jumpering 3 Nos Earth pits with earth trough except erection of Distribution Transformer. 89 Erection of Distribution Transformer including loading of Distribution Transformer at stores and erection at structure or vice versa. 90 (i) Upto 25 KVA Distribution transformer / Metering set. 91 (ii) Above 25 KVA to 100 KVA 92 (iii) Above 100 KVA to 250 KVA 93 (iv) 500 KVA and above 94 (V) Failed DT replacement below 100 KVA 95 (vi) Failed DT replacement 100 KVA and above 96 Erection of 11 KV single pole Structure including erection of DT complete without centre support 97 Erection of 11 KV Single Pole structure including erection of DT complete with centre support 98 ERECTION OF DP STRUCTURE: 99 Erection of DP structure with stay as per TNEB standard including fixing of top channel, cross bracing, concreting, painting, colour washing etc., 100 (i) With 11 KV AB switch using all types of poles of size 9.14 m and above length 101 (i) With 22 / 33 KV AB switch using all types of poles of size 9.14 m and above length 102 Erection of single pole DP with completeand with single earth 103 Dismantling Charges 104 Dismantling of RCC, REC, PSC & metal pole of all sizes including the closing of the pit 105 For breaking the mass concrete of all supports 106 Dismantling of stay set complete 107 (i) including stay rod 108 (ii) Without stay rod 109 Dismantling of conductor of upto 7/2.59 including transporting the conductors to the nearest road side and stocking in coils 110 Dismantling of conductor of above 7/3.35 including transporting the conductors to the nearest road side and stocking in coils 111 Dismantling of Transformer structure materials complete set and transporting the same from the location to the road side 112 Dismantling of Cross arm clamps TI fitting hardwares, insulators etc., 113 CONCRETING WORKS: 114 Concreting with 1:4:8 mix using 40 mm Jelloy including curing (material+labour) 115 (i) Mass concreting of poles 116 (ii) Sleeve concreting 117 (iii) Stay concreting 118 EARTHING: 119 (i) Earthing of poles with GI wires 4 or 6 SWG by coil earthing 120 (ii) Provision of spike including earthing arrangement 121 (iii) Pipie earthing including excavation of earth pit and fixing earth pipe 3 m length 122 (iv) Replacing the corroded earth pipes of transformer structure and replacing the earth wire completely with aluminium lugs for termination 123 (v) Replacement of corroded earth pipe 124 LOADING AND UNLOADING CHARGES: 125 Loading or unloading of Distribution Transformer 126 (i) Upto 100 KVA 127 (ii) Above 100 KVA and upto 500 KVA 128 (iii) Metering set of all ratios 129 Loading or unloading of various sizes of poles 130 (i) REC, RCC, PSC pole upto 8.00 m length 131 (ii) All REC, RCC pole above 8.00 m length 132 Loading / Unloading of LT Pin insulator shackle, guy shackle, LT Pin, Metal parts, HT pin etc., 133 TRANSPORTATION CHARGES: 134 Transportation of all types and sizes of poles and other associated materials from Road side to pole pit and vice versa upto 0.50 KM 135 Transportation of all type of poles by bullock cart or other vehicle (for all sizes of poles including loading and unloading) 136 (i) For a lead upto 5 KM 137 (ii) Above 5 KM of lead of every KM 138 Transporting of conductors of all sizes from road side to pit locations upto one KM of Conductor 139 (i) Transporting of Distribution Transformer / Line materials from stores to office / site upto 8 KM distance by engaging 1 Ton capacity Minidor (Lorry) 140 (ii) Above 10 KM 141 MISCELLANEOUS WORKS: 142 Provision of guarding with two numbers earth pits excluding stay set erection 143 (i) Flat guarding with earth pit 144 (ii) Split neutral 145 (iii) DT yard cleaning 146 Provision of street light,switching arrangement including fixing of meter, wiring& service board etc 147 Fixing of Street light 148 Releasing and erection 1 ph SC wire [during conductor or support change] 149 Releasing and erection 3 ph SC wire [during conductor or support change] 150 Re examination of DT earthing ( Digging , inspection and making connection in between extg. 3nos Earth pipe ) 151 Re-Earthing of structure completely 152 Destruction of pole concreting at site 153 Retrieving grill from Deteriorated RCC pole 154 Fixing of Modem including accessories 155 Cleaning of RMU 156 Cleaning of Ring Fencing 157 WORKSHOP CHARGES: 158 Manufacturing / Altering of Clamps 159 Drilling of holes in the structure materials clamps etc., 160 AB switch or open type side arm stud, cutting and drilling holes 161 Manufacturing of earth pipe clamps for structure including of drilling holes and welding and clamp with earth pipe 162 GENERAL: 163 Numbering of Poles including cost of paint 164 Painting of iron poles up to 36 ft length with double coats including cost of paint 165 Painting of iron poles up to 40 ft 200/100 length with double coats including cost of paint 166 Engaging Machines for Works 167 Engaging Crane per Hour (for handling of poles, Metering set,DT etc) 168 Engaging JCB per Hour (for extension works & maintenance works etc) 169 HT UG Cable 170 Clearing Scrub jungle 171 Dismantling and clearing away the Brick/ Stone masonry walls of any thickness and built in cement mortar 172 Dismantling and clearing away the Plain cement concrete 173 Dismantlingand clearing away the RCC 174 Earth work excavation in all kind of soilswithin an initial of 10m and lift of 2m in trenches 175 Earth work excavation in soft disintegrated rock (notrequring blasting) and depositing on bank within an intial of 10m and lift of 2m in trenches (Narrow pits) less than 1m width 176 Removing hard rock by wedging, chiselling and trimming to proper shape where blasting is prohibited. 177 Cutting open the Blacktopped road surface including the cost for providing signal boards, lights,watch and ward to regulate the traffic, taking all precautions to protect the men, materials and the public fromo any possible accidents etc.,using JCB/Air compressor (or) drilling machines etc., wherever necessary (at anytime throughout the day) including taking all precautions to prevent any damages to the Telecom and Water lines. 178 Dewatering the cable trench / duct using 5 HP Diesel pumpset wherever necessary including hire charge for Tools & Plants, labour, lead and lifts etc complete. 179 Refilling with excavated earth consolidating in layers and the top brought for line with the existing surface including cost of labour, lead,lift etc., complete. 180 Removal cut stone slabs/RCC cover slabs 181 Laying of PCC (1:3:6) using 20mm HBG metal over the casing PVC pipes provided atthe road crossings streets in cable ducts etc., including cost of all materials, lead, lift, labour charges,watch and ward, danger light, signal board etc., complete. 182 Supplying of RCC V troughs 11 KV and laying over the UG Cable to proper grade and alignment inside the cable trench, printing letters of not less than 75 mm an either side of the troughs as directed by the Engineer incharge of works including the cost for all materials, transporting of troughs from the source to the destination upto 30 kms, Stenciling, Painting, Brushed all leads and lifts etc., complete. 183 Laying of 11 KV RCC V troughs and laying over the UG cable to proper grade and alignment inside thecable trench painting letters ofnot less than 75mm an either side of ;the troughs as directed by the Engineer incharge of works including the cost of all materials ,upto 30kms stenciling painting brushed all leads and lifts etc complete 184 Supplying of RCC V troughs 33 KV and laying over the UG Cable to proper grade and alignment inside the cable trench, printing letters of not less than 75 mm an either side of the troughs as directed by the Engineer incharge of works including the cost for all materials, transporting of troughs from the source to the destination upto 30 kms, Stenciling, Painting, Brushed all leads and lifts etc., complete. 185 Laying of 33 KV RCC V troughs and laying over the UG cable to proper grade and alignment inside thecable trench painting letters ofnot less than 75mm an either side of ;the troughs as directed by the Engineer incharge of works including the cost of all materials ,upto 30kms stenciling painting brushed all leads and lifts etc complete 186 Supplying, laying, jointing and fixing in position cement pipes of 225 mm dia in size in the excavated cable trench as directed by the Engineer incharge at site, including the cost of rope, sealing the ends with cement mortar, labour, lead, lifts etc complete. 187 Uncoiling and laying of 11 KV HT cable in the excavated trench including drawing the cable trough RCC/GL/PVC pipes wherever necessary at road crossing etc without any damage including transporting of cables, tools and plants labour lead, lift etc complete 188 Uncoiling and laying of 33 KV HT cable 3x 400 Sq.mm in the excavated trench including drawing the cable trough RCC/GL/PVC pipes wherever necessary at road crossing etc without any damage including transporting of cables, tools and plants labour lead, lift etc complete 189 Uncoiling and laying of 33 KV HT cable1 x 630 Sq.mm in the excavated trench including drawing the cable trough RCC/GL/PVC pipes wherever necessary at road crossing etc without any damage including transporting of cables, tools and plants labour lead, lift etc complete 190 Cutting the cable of required length and sealing the ends with suitable end caps for 11 KV XLPE cables, including cost of all materials, Tools and Plants,leads and lifts etc., complete. 191 Transporting of the remains of the empty cable drums (iron materials) to the stores for devolution including loading and unloading, leads and lifts, etc., complete. 192 Supply and erection of cable marker in RCC (1:2:4) using 20mm HBS metal of size 0.3m x 0.60m and of 100mm thick, engarving letters TNEB UG CABLE Painting the engraved letters, fixing the Cable Marker in a bed of PCC (1:3:6) using 20mm HBS Metal of size 0.45m x 0.30m x 0.45m including cost of all materials, labour, Transporting to the destination, all leads and lifts etc., complete. 193 Providing watch and ward required at site as directed by the Engineer incharge 194 Uprooting of treecutting charges including labour charges, power machine with hire charges 195 Providing crusher dust instead of sand with good quality to a depth upto 150mm (6) including cost of materials, labour, leads and lifts etc., complete. 196 Construction of RCC trench with removable RCC slab including cost of all materials, labour, lead, lift transporting, centering charges, curing with all lead, lifts etc complete (in 1.35mts depth) 197 Construction of RCC trench with removable RCC slab including cost of all materials, labour, lead, lift transporting, centering charges, curing with all lead, lifts etc complete (in 1.20mts depth) 198 Labour charges for erection of 11KV 3x120 Sqmm abd 3x300 Sqmm Out door/In door termination Kit (LMR) 199 Labour charges for erection of 11 KV 3x120 Sqmmand 3x300 Sqmm straight joint Kit (LMR) 200 Labour charges for erection of 33 KV 3x400 SqmmIndoor/Outdoor terimination Kit (LMR) 201 Labour charges for erection of 33 KV 3x400 Sqmm Straight joint Kit (LMR) 202 Labour charges for erection of 33 KV 1x630SqmmIndoor/Outdoor terimination Kit (LMR) 203 Labour charges for erection of 33 KV 1x630 Sqmm straight joint kit (LMR) 204 LT UG cable 205 Clearing Scrub jungle 206 Dismantling and clearing away the Brick/ Stone masonry walls of any thickness and built in cement mortar 207 Dismantling and clearing away the Plain cement concrete 208 Dismantlingand clearing away the RCC 209 Earth work excavation in all kind of soils within an initial of 10m and lift of 2m in trenches (Narrow pits) less than 1m width 210 Earth work excavation in soft disintegrated rock (not requiring blasting)and depositing on bank within an initial of 10m and lift of 2m in trenches (Narrow pits) less than 1m width 211 Removing hard rock by wedging, chiselling and trimming to proper shape where blasting is prohibited. 212 Cutting open the Blacktopped road surface including the cost for providing signal boards, lights,watch and ward to regulate the traffic, taking all precautions to protect the men, materials and the public fromo any possible accidents etc.,using JCB/Air compressor (or) drilling machines etc., wherever necessary (at anytime throughout the day) including taking all precautions to prevent any damages to the Telecom and Water lines. 213 Dewatering the cable trench / duct using 5 HP Diesel pumpset wherever necessary including hire charge for Tools & Plants, labour, lead and lifts etc complete. 214 Refilling with excavated earth consolidating in layers and the top brought for line with the existing surface including cost of labour, lead,lift etc., complete. 215 Removal cut stone slabs/RCC cover slabs 216 Laying of PCC (1:3:6) using 20mm HBG metal over the casing PVC pipes provided atthe road crossings streets in cable ducts etc., including cost of all materials, lead, lift, labour charges,watch and ward, danger light, signal board etc., complete. 217 Supplying of RCC V troughs 11 KV and laying over the UG Cable to proper grade and alignment inside the cable trench, printing letters of not less than 75 mm an either side of the troughs as directed by the Engineer incharge of works including the cost for all materials, transporting of troughs from the source to the destination upto 30 kms, Stenciling, Painting, Brushed all leads and lifts etc., complete. 218 Laying of 11 KV RCC V troughs and laying over the UG cable to proper grade and alignment inside thecable trench painting letters ofnot less than 75mm an either side of ;the troughs as directed by the Engineer incharge of works including the cost of all materials ,upto 30kms stenciling painting brushed all leads and lifts etc complete 219 Supplying, laying, jointing and fixing in position cement pipes of 225 mm dia in size in the excavated cable trench as directed by the Engineer incharge at site, including the cost of rope, sealing the ends with cement mortar, labour, lead, lifts etc complete. 220 Supplying and laying of 160mm.dia PVC pipe of 6 KSC of approved quality and of reputed make for road and drainage crossing for the HT cable laying at road drainage crossing including cost of all materials, labour, lead, lifts etc., complete. 221 Uncoiling and laying of LTcable of size 4 x 120 and4 x 240 Sq.mm in the excavatedin the excavated trench including drawing the cable trough RCC/GL/PVC pipes wherever necessary at road crossing etc., without any damage including Transporting of cables, Tools and plants, labour, lead, lift etc., complete. 222 Uncoiling and laying of LT cable of size 4x25 Sq.mm and 2x16 Sq.mm for service connection including excavation of trench laying of cable refilling of trench and termination of cables and transportation. 223 Cutting the cable of required length and sealing the ends with suitable end caps for 11 KV XLPE cables, including cost of all materials, Tools and Plants,leads and lifts etc., complete. 224 Transporting of the remains of the empty cable drums (iron materials) to the stores for devolution including loading and unloading, leads and lifts, etc., complete. 225 Supply and erection of cable marker in RCC (1:2:4) using 20mm HBS metal of size 0.3m x 0.60m and of 100mm thick, engarving letters TNEB UG CABLE Painting the engraved letters, fixing the Cable Marker in a bed of PCC (1:3:6) using 20mm HBS Metal of size 0.45m x 0.30m x 0.45m including cost of all materials, labour, Transporting to the destination, all leads and lifts etc., complete. 226 Providing watch and ward required at site as directed by the Engineer incharge 227 Uprooting of treecutting charges including labour charges, power machine with hire charges 228 Providing crusher dust instead of sand with good quality to a depth upto 150mm (6) including cost of materials, labour, leads and lifts etc., complete. 229 Construction of RCC pedestal of size 0.75 x 0.25 x 1.05m (2 Nos) for fixing 6 way pillar box with 15.76 kgs of steel reinforcement in 0.394m 3 of ROC (1:2:4) mix concrete using 20mm HBS metal , plastering (1:5) 12 mm thick around the pedestal colour washing two coats over one coat of primer using white cement including cost of all materials, labour, transportation of all materials of size, fixing the pillar box in proper alignment over the pedestal, tools and plants, lead, lift, etc., complete. 6 way pillar box. 230 Construction of RCC pedestal of size 0.60 x 0.25 x 1.05m (2 Nos) for fixing4 way pillar box with 13.88 kgs of steel reinforcement in 0.315 m3 of ROC (1:2:4) mix concrete using 20mm HBS metal, plastering (1:5) 12 mm thick around the pedestal colour washing two coats over one coat of primer using white cement including cost of all materials, labour,transportation of all materials of size, fixing the pillar box in proper alignment over the pedestal, tools and plants, lead, lift etc., complete. Mini pillar box. 231 Construction of RCC pedestal of size 0.60 x 0.25 x 1.05m (2 Nos) for fixingMinipillar box with 13.88 kgs of steel reinforcement in 0.315 m3 of ROC (1:2:4) mix concrete using 20mm HBS metal, plastering (1:5) 12 mm thick around the pedestal colour washing two coats over one coat of primer using white cement including cost of all materials, labour,transportation of all materials of size, fixing the pillar box in proper alignment over the pedestal, tools and plants, lead, lift etc., complete. Mini pillar box. 232 Paintingtwo coats of enamal emulsion paint over one coat of metal white primer for 6 way pillar boxes by usingspray paint including cost of materials, lead, lift, labour etc., complete. 233 Paintingtwo coats of enamal emulsion paint over one coat of metal white primer for mini pillar boxes by usingspray paint including cost of materials, lead, lift, labour etc., complete. 234 Supplying and pasting of stencil cut stickers with good adhesives with lettres showing TNEB, 440 V and Danger with Skull and Bone symbols etc including cost all materials, lead, lift, labour etc., complete. (LMR) 235 Construction of RCC trench with removable RCC slab including cost of all materials, labour, lead, lift transporting, centering charges, curing with all lead, lifts etc complete (in 0.75mts depth) 236 Dismantling of 6 / 4 way pillar box including associated accessoris, loading on the vehicle, transporting, unloading at stores and stacking. 237 Dismantling of Mini pillar box including associated accessoris, loading on the vehicle, transporting, unloading at stores and stacking.
