|
| 1 | Earth Work in excavating trenches by mechanical means for all kind of soil including road in the cable laying way, (not exceding 1.5m in width n.exc 1.5m depth), including dressing of sides and ramming of bottoms, for laying of cable, all as directed. |
| 2 | Excavating trenches n.exc 1.5m wide and n.exc 1.5m depth in hard/dense soil including road in the cable laying way and getting out, for laying of cable, all as directed. |
| 3 | Supply and filling of sand in layers inside the trenches and as directed. |
| 4 | Supply and lying of un-reinforced precast concrete cable cover, class HV, type 1, flat, size 300mmx180mmx40mm inside the trenches and directed. |
| 5 | Returning and refilling of soil, including spreading ,levelling, well ramming in layer not exc 25cm. |
| 6 | Supply and laying/fixing of GI pipe 100mm dia, medium grade pipe with ISI mark laid in trenches for passing of cables along the road crossing & others as require and pole structure with the all fittings and accesscries or as directed. |
| 7 | Supply and making PCC Work with type C-2 in cement concret mortar 1:3:6 with 40mm graded aggregate as per specification along the road crossing and other as directed. |
| 8 | Supply, laying, connection,commisioning/testing of HT cable, 11KV(E) grade, 150 Sq. mm three core, aluminium conductor,11000 Volts grade, XLPE insulated, screened, PVC bedded, Galvanised steel strip armoured, electric power cable (heavy duty) as per IS, cable should supply in minimumlength of 500 Mtrs in each drum and as directed. |
| 9 | Supply and making outdoor cable end termination with heat shrinkable jointing kit complete with jointing materials and all accessories including connection arrangemens (Lugs, SS bolts, nuts and washers, extantion Copper strips, earthing connection arrangement etc.) Suitable for 11 KV (E) grade 3 core, 150 sq. mm XLPE armoured aluminium conductor cable. |
| 10 | Supply and making straight through cable jointing wth heat shrinkable jointing kit complete with jointing material and accessaries suitable for 3 core, XLPE armoured aluminium conductor cable of 11 KV(E) grade cable of size 150 sq.mm. |
| 11 | S/F 11KV, 200Amps out door off load triple pole Gange operated device (mechanically operated switch), single break, tilting type, mounted on insulator and steel frame, with operating machanism, worked from ground level, manufactured as per relevant IS, without earth switch, with test certificate. |
| 12 | Supply and fixing of cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts washer nut, welding, bending cold or hot drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finish coat of paint. |
| 13 | Demolition of cement concrete in ground floors & paving (below or above ground level) & remove of demolished material and depositing where directed. |
| 14 | Supply and fixing of prestressed concrete pole 11.00 meter long. 152mmx152mm at top and 152mmx260mm at bottom, class9 |
| 15 | Supply and fixing mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, includingcranking, bending spirrally for hooping for clumns, hooking ends and binding with and including mild steet wire (annealed) not less than 0.9 mm dia or securing with clips. |
| 16 | Supply and making of RCC work with type B-1 in cement concrete mortar nominal mix in 1:2:4 ( with 20mm graded aggregate) as per specification and as directed. |
| 17 | Supply and fixing cable rout marker with 10 cm X 10 cm X 5mm thick G.I plate with inscription arrow marked there on HT cable 11 KV (cable joint 11KV as required), bolted/welded to 35mm X 35mm X 6mm angle iron, 1m long and fixing the same in ground with cement concret as required. |
| 18 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work for flat rough finished surfaces of concrete, vertical or to batter. |
