Tender For Installation And Implementation Of It Enabled Day And Night Illuminated Led Acrylic Led Acrylic Graphical Stuffs, Special Effects And Artifacts Including Design, Technological Beautification And Other Peripheral Development Of Swarga Dwara, Binka On Engineering, Procurement & Construction (Epc) Mode Contract. , Part 10: Installation And Implementation Of It Enabled Day And Night Illuminated Led Acrylic Led Acrylic Graphical Stuffs, Special Effects And Artifacts Including Design, Technological Beautification And Other Peripheral Development Of Swarga Dwara, Binka On Engineering, Procurement & Construction (Epc) Mode Contract. , Technical Specifications Electrical Graphical Display For Entry Of Swarga Dwara, Binka • Overall Size Of Digital Graphics - 20 Feet X 2Feet. • The Digital Graphics Will Be Fitted To The Wall Of The Entry Wall Of Swarga Dwara, Binka, By Proper Means Of Suspension And Support. • Ms Panel Structure Work To Be Fabricated To Hold The Complete Structure And Frame Of The Digital Graphics. • The Entire Digital Graphics Will Be Made By Acp Cladding On Front Sides Over The Structural Frame Of Cream/ Ivory Colour. 3Mm Acp Of City Bond Or Any Reputed Brands Is To Be Used. • The Digital Graphics Will Be Consisting Of: ? Binka Nac Logo On The Top Of Size: 3Ft Dia., ? Front Side: Led Acrylic Letters Stating Of Size: 12Inches. Back Side: Led Acrylic Letters Of Size: 12Inches ? The Letters Will Be Of Cherry Red Colour, Made Up Of Acrylics, With Module Led Inside For Illumination. ? 2Nos. Of Namaskar Logo On Both The Ends Of The Graphical Display, Of Height 1.5Ft. (Both Sides Of Graphical Display) • Led Acrylic Letters: • The Letters Should Be Of 3D With A Minimum Thickness 2.5 Inches. • The Side Raising With 2 To 3 Of Aluminum. • The Letters Will Be Made Up Of Led Acrylics As Front Design With Design Layers. 3-4Mm Thick Acrylics Of Make: Migra Cipta/ Sinkolite Brand. • There Would Be A 1 Border With Led Strip Light Of Warm White Colour All Around The Borders Of The Graphical Display, By Making An Extended Canopy, To Create A Backlighting Effect. • It Enabled Digital Graphics Module Led (Make: Hisign) Supported By Smps To Be Used For The Individual Letters And For All Logos. • Power-- External Power Supply: 220 - 240V Ac, 50Hz, 33-Amp 12V Dc Water Resistant Power Supply If 1 To 2 Kw Required. , Led Acrylic Letters Stating • The Letters Will Be Made Up Of Led Acrylics Of Cherry Red Colour Stating • 3-4Mm Thick Acrylics Of Make: Migra Cipta/ Sinkolite Brand Will Be Used. • Letter Size: 3Ft Height. • It Enabled Digital Graphics Module Led (Make: Hisign) Supported By Smps To Be Used For The Individual Letters. Light Source: 1.5W Led Lights. • The Side And Back Raising Will Be Of Aluminium With Ss Finish. • The Led Acrylic Letters Would Be Fitted With 1.5 Ss Pipes And Grouted With Cement Concrete Infront Of The Platform Of The Shiva Statue. • Power-- External Power Supply: 220 - 240V Ac, 50Hz, 33-Amp 12V Dc Water Resistant Power Supply If 1 To 2 Kw Required. , Ss304 Pole Special Designed Laser Carved Fancy Street Lights With Full Body And Head Lightings As Required Of Total Height Minimum 12 Ft. Qty:10Nos. ? The Pole Will Be Of Ss304 Of 2.5 Dia. And 10Ft Height. Out Of Which 8 Will Be The Body With Day And Night Illuminated. ? The Body Of The Pole Out Of Which 8 Feet Will Be Made Up Of 3Mm Acrylic Sheet (Of Required Colour And Design) With It Enabled Acp Router/ Laser Carved (Of Required Colour And Design) Would Be Based Over 1X 1 Square Pipe Of Ss304 For Border Frames Of Size- 8X8 And Of 8Ft Height. 8 Nos. Of Led Rod Of 3.5 Height Of 22 Watts Each To Be Installed Inside It For Illumination (Of Required Colour). ? At The Top, A Head Light With Aluminum Casting Of Minimum Of 30 Height Will Be Placed. A Driver Based Led Of 50 Watt Of Warm White Color Will Be Used For The Top Illumination. ? The Bottom End Part Of The Pole Of Fancy Light Post Will Be Covered With Designed Multi-Layer Frp Base (With Pot-Like Design) Of Dimension - 10 Base Dia. And 4 Top Dia., Having Golden Colour. Additionally, 2Nos. Of Multi-Layer Frp Designed Rings Of 3 Height & 4 Dia., Will Be Provided Over The Base Pole, For Better Look. ? The Entire Pole Will Be Supported With Required Civil And Mechanical Foundation As Required. Underground Foundation Supported With A 2 Depth X 1 Length X 1 Breadth Reinforced Cement Concrete Civil Foundation And Plinth As Required Inside The Ground. Underground Base Will Be Made By Digging 2Ft Underneath, And Filling It With Concrete And Securing The Concrete With A Baseplate. The Cast Iron Base Design Will Be Joined With The Base Plate With Nut Bolts. ? Base Plate At Bottom Would Be Of 10 Mm Thickness X 10 X 10 Size Ms Plate. ? Nuts Would Be Of Minimum 8/10 Mm * 4 Numbers And The Required Height Would Be Of 2 Feet As Required. Ring Size Would Be Of 8/10 Mm Rods, With Base Plate Of 8/10 Mm. ? The Foundation Of The Street Pole Is Depending Upon The Available Conditions. ? The Dimensions Mentioned In This Specification Are Tentative Only May Differ A Bit. , Ss Pole Special Designed Fancy Garden Bollards With Body And Head Lightings As Required Of Total Heights Of Minimum 2.8 Feet Height. , The Complete Industrial Underground Electrical Connection By Using The Hard Pvc Pipes And 2.5Mm Core Wires To Be Connected To The Points For Required Electrical Supply Would Be Supported By Mcbs, Connectors, Timers, Switches And All. , Focusing Lights To Be Made Focus To The Artifacts And Peripheral Trees, As Required. The Statues Will Be Made Lighting With The Help Of Special Light Effects Of Rgb Of 200W Each (Qty: 1Nos.) Along With Other Lightings. The Platform Will Be Illuminated With The Help Of Best Quality Led Strip Lights. The Peripheral Trees In The Background Will Be Decorated With Special Light Effects, Led Rope Light Of Different Colours Around The Branches, To Give A Heavenly Appearance During The Night. Decorative Lanterns, Balls, Designed Objects Will Be Hanged To The Trees Of Different Colors. , Artifacts Shiva Statue Of 10Feet Height. •It Will Be Made Up Of Multi-Layer Frp With Fire Hydrant And Weather Resistant Properties. •The Statue Will Be Of Height At Least 10Ft. The Statue Will Be Based On A Reinforced Cement Concrete Platform Of 10 Feet Length X 8 Feet Width X 3Feet Height Above Ground Level And 3Feet Will Remain Underground. •A Water Fountain Will Be Emerging From Head Of Shiva Statue. Proper Arrangements For Water Fountain Will Be Made With Required Nozzles And 0.5Hp Motor Attached Inside It. Provision Will Be Made For Storing The Water Under The Statue , Statue Of Vrishabha Of 2Ft Height Will Be Placed Infront Of Shiva Statue. It Will Be Made Up Of Multi-Layer Frp With Water Resistant And Partial Heat Proof Properties. , Human Life Cycle Statues From Birth To Death (11Stages Viz. Baby, Grown Up Baby, School Going Child, College Going Boy, Working Professional Man, Married Couple, Pregnant Woman, Family Of Four, Aged Man Of 60S, Old Woman In Wheel Chair, Skeleton Of A Man With Graveyard). All These Will Be Made Up Of Multi-Layer Frp With Water Resistant And Partial Heat Proof Properties. The Statues Will Be Grouted With Deep Plain Cement Concrete Work, To Strongly Hold The Artifacts To The Ground/ Platform , Frp Dustbins Of Different Cartoon Or Animal Designs Of 3-4Ft Height, Made Up Of Multi-Layer Frp With Fire Hydrant And Weather Resistant Properties. Qty: 5Nos. , Frp Benches Made Up Of Multi-Layer Frp With Fire Hydrant And Weather Resistant Properties. The Stand Of The Benches Will Be Of Ms/ Gi. Qty:5Nos. , Civil: - Garbage Cleaning Of The Whole Site Of 1000 Sq. Ft. , Soil Filling/ Garbage Filling Of The Whole Site Of 3000 Cu Ft. Approx. , Platform For Human Life Cycle Statues -- 40 Feet X 3 Ft Width And Height 2 Feet Above The Ground And 2 Feet Under The Ground. The Platform Will Be Made Of Reinforced Cement Concrete And External Brick Work, With Proper Finishing Along With Plastering And Painting As Required. 3 Dpc On Top Of The Platform For Smooth Finish. 10Mm Ms Vertical Rods And 8Mm Ms Horizontal Rods To Be Provided, In The Foundation To Act As Ribbing To Give Extra Support In The Foundation. The Platform Will Be Supported By Pillars As Required. The Statues Will Be Grouted With Reinforced Cement Concrete For A Rigid Stay Within The Platform. , A Platform Of 10 Feet Length X 8 Feet Width X Height Of 5 Feet Above The Ground And 2 Feet Underground Foundation To Be Made To Place Mahakal Statue Above It. The Platform Will Be Made Of Reinforced Cement Concrete And External Brick Work, With Proper Finishing Along With Plastering And Painting As Required. 3 Dpc On Top Of The Platform For Smooth Finish. 10Mm Ms Vertical Rods And 8Mm Ms Horizontal Rods To Be Provided, In The Foundation To Act As Ribbing To Give Extra Support In The Foundation. The Platform Will Be Supported By Pillars As Required. The Statues Will Be Grouted With Reinforced Cement Concrete For A Rigid Stay Within The Platform , A Platform Of 6 Feet Length X 6 Feet Width X Height Of 2 Feet Above The Ground And 2 Feet Underground Foundation To Be Made To Place Vrushabha Statue Above It. The Platform Will Be Made Of Reinforced Cement Concrete And External Brick Work, With Proper Finishing Along With Plastering And Painting As Required. 3 Dpc On Top Of The Platform For Smooth Finish. 10Mm Ms Vertical Rods And 8Mm Ms Horizontal Rods To Be Provided, In The Foundation To Act As Ribbing To Give Extra Support In The Foundation. The Platform Will Be Supported By Pillars As Required. The Statues Will Be Grouted With Reinforced Cement Concrete For A Rigid Stay Within The Platform. , Cut-Off Wall Will Be Made Of Reinforced Cement Concrete With External Brick Work To Install The Ss Railing To Safeguard The Artefacts Of 150 R. Feet Length X 1Ft Height Above The Ground And 1.5Ft Underground X 10Mm Width. 12Mm Thick Plastering (1:6 Ratio) On 3 Sides Of The Cut Off Wall. 3 Dpc On Top Of The Wall To Place The Ss Railing As Required. The Cut-Off Wall Will Be Supported By 10Mm Ms Vertical Rods And 8Mm Ms Horizontal Rods In The Foundation To Act As Ribbing To Provide Extra Support In The Foundation. The Cut Off Wall Will Be Supported By Pillars As Required. The Ss Railing Will Be Grouted For A Rigid Stay On The Cut Off Wall. , 2D Painting Of All The Walls And Roofs Of Swarga Dwara, Binka.1000 Sq Feet , The Entire Location Will Be Surrounded With Ss Railing Raised Over 1Ft Of Cut-Off Wall. Ss Railing Of 2 Dia. Vertical Pipes (Columns) Of 3Ft Height Supported By ¾ Ss Pipes Of 3 Or 4 Rows To Be Placed Horizontally In Between The Vertical Columns. The Main Top Horizontal Pipe Will Be Of 2 Dia. Ss Railing Will Be Installed Over A Running Feet Of 150 Ft. The Master Pillars Of 3 Dia Would Be Placed At 9 Feet Apart And Would Have Designed Ball On Top. The Idlers Vertical Stand Would Be Provided In Order To Provide Support To The Horizontal Pipes. The Horizontal Pipes Would Have The Balls Fitted On It To Provide Extra Lucrative Look. , Horticulture: - Plantation Of Mexican Grass In The Whole Site Of Around 2000 Sq. Ft. Prior To That Soil Levelling, Compaction, And Anti Demit Treatment And Plantation Of Grass And Trees. , Plantation Of Other Design Trees And Other Flower Plants As Required In The Whole Site , Consultation And Engineering Supervision. , Complete Transportation, Handling, Storage And Hence Then Installation As Required. , Contingency And Risk Consideration. , Miscellaneous And Overheads As Required. , Annual Maintenance Contract For 1 Year, Which Does Not Include The Garden Watering And Maintenance Of The Horticulture. Please Enable Macros To View Boq Information
