Installation & Commissioning Of New It Enabled Day And Night Illuminated Led Acrylic Digital Graphics At Entry & Exit Of Binka, On Epc Mode Contract , Part 1: Installation & Commissioning Of New It Enabled Day And Night Illuminated Led Acrylic Digital Graphics At Entry & Exit Of Binka, On Epc Mode Contract , Part 1: Installation & Commissioning Of New It Enabled Day And Night Illuminated Led Acrylic Digital Graphics At Entry & Exit Of Binka, On Epc Mode Contract. Technical Specification:-- Overall Size Entry-Exit Structures Where The It Enabled Digital Graphics Need To Be Carried Out As Follows, • Rampur Road, Size= 42-50’(Length) X 4’(Height) • Sonepur Road, Size= 42-50’(Length) X 4’(Height) • Mahanadi Bridge Road, Size= 42-50’(Length) X 4’(Height) Civil 1. Cleansing Of The Whole Site. 2. Digging Of A Pit Of 11Ft Depth, 5Ft Length, 5Ft Width, For Both The Pillars. 3. The Underground Foundation Would Be 11’X3’X3’ Civil Foundation And Plinth As Required Inside The Ground. 2’ Of The Foundation Will Remain Above The Ground, Apart From 11’ Underground Depth. 4. 2Nos. Of Rcc Pillars Will Be Constructed On Each Side Of The Road, With A Base Of 10” Sand, 10” Metal, 6’’ Pcc. A Double Metal Mesh By Using 12Mm Iron Rods Will Be Placed To Cover The Base Of 4’ X 4’ As Required. The Pillars Side Walls Would Be Supported By 16Mm Vertical Iron Rods And 10Mm Horizontal Rods To Make A Mesh Of All Across Of 9’X3’X3’. 5. Base Plate Of Thickness 25Mm X 30’’ X 30’’ At Bottom Of The Piller Would Be Placed On Top Of The Ring Which Will Be Made, The Ring Would Have 25Mm Rods (8 Nos.) And Will Be Fitted Through 25 Mm Dia. Nuts Of 8 Numbers Each Side Respective Pillars. The Top Plate Will Be Ms Plate Of Thickness 12Mm Which Would Be Placed On Top Of The Pillars To Be Fixed By 8 Nuts Of 16 Mm, As Required. 6. The Pillars Would Be Supported By 6 Nos. Of Vertical Plates Of 12Mm Thickness Of Size 4” X 10” At The Bottom And 8Nos. Of 12Mm Plates At The Top Of Size 4’’ X 10”. Mechanical 7. Rigid Higher Side Ms/Gi Angular Supports To Be Fabricated For Entry/Exit On Both Sides Of The Road With A Base Plate To Hold The Complete Structure Of The Board As Required. 8. Rigid Ms/Gi Angular Supports (Poles): ? The Graphical Digital Display Would Be Supported By 2 Ms/Gi Poles. ? Two Poles To Be Provided Of Diameter Of At Least 12” And Height Of Minimum 20 Feet. ? The Poles Would Be At Least 43 Feet Apart (Approx.) As Per The Requirement. ? The Structure Frame Made Up Of Gi/Ms To Be Placed On Top Of The Poles. There Would Be 2 Structures Of Equal Length Each Would Be Placed With The Help Of Nuts, Bolts And Welding Joins In Order To Create A Seamless Join Among The Two. ? The Outer Frame Of The Structure Would Be Made Up Of Ms/ Ss Square Pipes Of 3” X 3” Thickness All Around. This Structure Would Be Supported 2” X 2” Pipes To Act As Ribbing To Be Placed 4 Feet Apart Vertically And 4 Feet Apart Horizontally As Well Of The Entire Structure. Approximate Weight Of The Structure Would Be Around 1050 Kgs. The Structure Would Be Of 2 Feet In Depth And Of Length Of Required Size. ? The Entire Structure Would Be Covered With Ms Sheet Both Sides. 9. The Entire Graphical Display Will Be Made By Acp Cladding On All The Sides I.E. Front-Back, Top And Bottom Sides In Order To Make A Box Like Structure. 3Mm Acp Of “City Bond” Or Any Reputed Brands Gates.Is To Be Used. 10. The Poles Will Be Ms Sheet Cladded Into A Square Shape Pillar By Using The Gi/Ms Pipe Structures As Support All Across The Poles. 11. Vinyl Will Be Pasted On Top Of The Ms Sheet Cladding With Any Historical Or Traditional Design. 12. Both The Pillars Would Be Backlighted By Using The Wipro Make Running Leds With A Lucrative Look Around. Electrical & Electronics 13. The Graphical Display Will Be Consisting Of: ? Front Side – Binka Nac Logo On The Extreme Left, “???????”, “????????? ????? ?????, ??????”, And “Welcome Lady Logo” On The Extreme Right. ? Back Side - Binka Nac Logo On The Extreme Left, “???????”, And “Welcome Lady Logo” On The Extreme Right. 14. Dimensions Of The Components Of Graphical Display: ? Binka Nac Logo – Size: 3Ft Height; It Will Be Made Up Of Acrylics With Vinyl Pasting. ? Letters Of ‘???????’ & ‘???????’ – Size: 14Inches. It Will Be Made Up Of Acrylics Of Cherry Red Colour. ? Letters Of ‘????????? ????? ?????, ??????’ – Size: 12Inches. It Will Be Made Up Of Acrylics Of Orange Colour. ? Welcome Lady Logo – Size: 3Ft Height. It Will Be Made Up Of Acrylics With Vinyl Pasting. 15. Led Acrylic Letters: ? The Letters Should Be Of 3D With A Minimum Thickness 2.5 Inches. ? The Side Raising With 2” To 3 Of Aluminum With Ss Finish. ? The Letters Will Be Made Up Of Led Acrylics As Front Design With Design Layers. 3-4Mm Thick Acrylics Of Make: “Migra Cipta/ Sinkolite” Brand. 16. There Would Be A 1” Border With Led Strip Light Of Red Or Any Desired Colour All Around The Borders Of The Graphical Display, By Making An Extended Canopy, To Create A Backlighting Effect. 17. On The Top Of The Structure: - Gate 1: Mahadev Theme A)Mahadev With Trishul Logo: To Be Installed Above The Graphical Display In The Center. ? Size: Of At Least 4’ Height. ? It Will Be Made Up Of Acrylic With Vinyl Pasted On Front Facing Supported By Led Upon Acp With 2”/3” Aluminum With Ss Finish Side Raising. ? It Will Be Fabricated Using Ms-Channel, And Reinforced With Ms-Sheet For Better Strength And Rigidity, By Means Of Welding In Order To Create A Seamless Join. B)Two Nandi Structure: To Be Installed Above The Graphical Display On Both Sides Of The Mahadev Logo. ? Size: Height Of At Least 2’ And Width At Least 3’. ? It Will Be Made Up Of Acrylic With Vinyl Pasted On Front Facing Supported By Led Upon Acp With 2”/3” Aluminum With Ss Finish Side Raising. Gate 2: Narayani Temple Theme A)Narayani Temple Logo: To Be Installed Above The Graphical Display In The Center. ? Size: Of At Least 3’ Dia. ? It Will Be Made Up Of Acrylic With Vinyl Pasted On Front Facing Supported By Led Upon Acp With 2”/3” Aluminum With Ss Finish Side Raising. ? It Will Be Fabricated Using Ms-Channel, And Reinforced With Ms-Sheet For Better Strength And Rigidity, By Means Of Welding In Order To Create A Seamless Join. B)Two Lion Structure: To Be Installed Above The Graphical Display On Both Sides Of The Temple Logo. ? Size: Height Of At Least 3’ And Width At Least 2’. ? It Will Be Made Up Of Acrylic With Vinyl Pasted On Front Facing Supported By Led Upon Acp With 2”/3” Aluminum With Ss Finish Side Raising. Gate 3: Shiva Temple Theme A)Shiva Temple Logo: To Be Installed Above The Graphical Display In The Center. ? Size: Of At Least 3’ Dia. ? It Will Be Made Up Of Acrylic With Vinyl Pasted On Front Facing Supported By Led Upon Acp With 2”/3” Aluminum Side Raising. ? It Will Be Fabricated Using Ms-Channel, And Reinforced With Ms-Sheet For Better Strength And Rigidity, By Means Of Welding In Order To Create A Seamless Join. B)Two Nandi Structure: To Be Installed Above The Graphical Display On Both Sides Of The Temple Logo. ? Size: Height Of At Least 2’ And Width At Least 3’. ? It Will Be Made Up Of Acrylic With Vinyl Pasted On Front Facing Supported By Led Upon Acp With 2”/3” Aluminum With Ss Finish Side Raising. Artifacts 18. Statues Of Soldiers (On Welcome Side) & Classical Odishi Dancers (On Thank You Side). Total: 4 Statues For Each Gate. ? These Are To Be Placed Infront Of The Pole, On The Welcome Side Of The Entry-Exit I.E Front Side. ? Soldiers Statue Size: Minimum 7Ft Height. ? Classical Odishi Dancer Size: Live-Size (5.5Ft Height). The Classical Dancer Statues Will Be In Namaskar Position And Welcoming Position. ? These Statues Will Be Made Up Of Multi-Layer Frp With Weather Resistance And Fire Hydrant Quality. Assumptions 19. Detailed Earthling Engineering Design And Work Would Be Carried Out As Required To Avoid The Thunderbolts And Lighting Related Damages. 20. Power Supply: 3 To 4 Kw, External Power Supply: 220 - 240V Ac, 50Hz, 33-Amp 12V Dc Water Resistant Power Supply. 21. Environment: Operating Temperature: -20°C To 80°C Humidity - 0 To 100% Rh Pressure - +/- 10%. 22. The Physical Damage Caused Through Wind And Other Factors, Cloud Bursting, Lighting Damages, Voltage Fluctuations And The Theft Are Not Considered Under The General Amc. 23. The Night Electricity Connection Will Be Availed By Nac Binka Of Minimum 3-4 Kw Power Supply. Note: The Detailed Design And Structural Analysis Of The Proposed Gate To Be Vetted And The Signed Off Copy To Be Submitted Through The Authorized Hod Of Any Institute Of Great Repute. , Detailed Design And Maintaining The Changes As Required Of The Projects. , Consultation And Engineering Supervision. , Complete Transportation, Handling And Storage As Required. , Contingency And Risk Consideration. , Miscellaneous And Overheads As Required.Complete , Amc For 1 Year. Please Enable Macros To View Boq Information
