}

Carrying Out Plumbing And Furniture Work At A Building Owned By Pune Municipal Corporation., pune-Maharashtra

Tender Notice

52166249
Carrying Out Plumbing And Furniture Work At A Building Owned By Pune Municipal Corporation.
Tender
Indian
Maharashtra
Pune
13-11-2025

Tender Details

Carrying out plumbing and furniture work at a building owned by Pune Municipal Corporation.-ITEM NO: 1 Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) (SSR Item No: 27.15) (PMC Bhavan) Unique No (15383) Rate List Year (2024-2025) ITEM NO: 2 Puff Sheet (80 mm): Providing and puff panel using 0.8 mm thick precoated Zinkaluminium sheet withfixing in position sandwich profile with 48 kg/m^3 density expanded foam 9 puff item to include necessary fixure and fittings scaffolding for erection etc.complete (SSR Item No: 62.3) (PMC Bhavan) Unique No (16534) Rate List Year (2024-2025) ITEM NO : 3 Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing Inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. Number: As directed by Engineer-in-charge. SSR Item No: 23.07) (PMC Bhavan) Unique No (15303) Rate List Year (2024-2025) TEM NO: 4 Providing internal cement plaster 20mm. thick in Single coats in Cement mortar 1:3 without neeru finish, to concrete, brick surface, n all positions including scaffolding and curing etc. complete. SSR Item No: 32.08) (PMC Bhavan) Jnique No (15443) Rate List Year (2024-2025) ITEM NO: 5 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. (SSR Item No: 32.11) (PMC Bhavan) Unique No (15444) Rate List Year (2024-2025) ITEM NO: 6 Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. (SSR Item No: 32.15) (PMC Bhavan) Unique No (15447) Rate List Year (2024-2025) ITEM NO: 7 Providing and fixing in position (as per 1868/1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/Running metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/Running metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram / Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram / Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating with box (SSR Item No: 39.43) (PMC Bhavan) Unique No (15717) Rate List Year (2024-2025) ITEM NO: 8 Providing and laying Vitrified MATT finish having decorative type of size 600 millimeter x 600 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical and confirming to IS 15622-2006 (Group Bla) of approved make shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints curing and cleaning etc .complete. (SSR Item No: 33.59) (PMC Bhavan) Unique No (15527) Rate List Year (2024-2025) ITEM NO: 9 Providing and laying telephone black / Amba White /Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. (SSR Item No: 33.68) (PMC Bhavan) Unique No (15533) Rate List Year (2024-2025) ITEM NO: 10 Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. (SSR Item No: 40.2) (PMC Bhavan) Unique No (15773) Rate List Year (2024-2025) ITEM NO: 11 Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking, arrangement and one coat of red lead primer and oll painting etc. complete. (I.S. 105211983). (SSR Item No: 39.26) (PMC Bhavan) Unique No (15700) Rate List Year (2024-2025) नगरप ITEM NO: 12 Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR Item No: 25.52) (PMC Bhavan) Unique No (15328) Rate List Year (2024-2025) ITEM NO: 13 Providing and fixing 19 mm thick waterproof plywood (durlan ucotech greenply, mars (marsgold 100% garjan), euro, orchid, century with phenol bonded etc (ISI)) (SSR Item No: 62.12) (PMC Bhavan) Unique No (16543) Rate List Year (2024-2025) ITEM NO: 14 Providing and fizing 12 mm thick waterproof plywood (durian ucotech greenply, mars (marsgold 100% garjan), euro, orched, century with phenol bonded etc (ISI)) (SSR Item No: 62.11) (PMC Bhavan) Unique No (16542) Rate List Year (2024-2025) ITEM NO: 15 Laminates sheets 1 mm thick: Providing and fixing laminates sheets as per company specification and fix it with fevicol -Recommended companies formica, Royal touch, Marino, Green lam, Euro. (1 mm thick laminates sheets) (SSR Item No: 62.23) (PIMC Bhavan) Unique No (16566) Rate List Year (2024-2025) ITEM NO: 16 High Quality Veneer (Timez, Durian, Century/Green co, etc) completed (SSR Item No: 62.26) (PIMC Bhavan) Unique No (16569) Rate List Year (2024-2025) ITEM NO: 17 Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish scaffolding if required etc, complete. Note: The work to be executed on prior approval of Superintending Engineer will be necessary. (SSR Item No: 34.09) (PMC Bhavan) Unique No (15549) Rate List Year (2024-2025) ITEM NO: 18 Providing, supplying, fabricating and fixing panel of aluminium composite panel cladding in approved shape made out of 4 mm thick ACP sheet material consisting of 3mm thick FR grade mineral core following NBC part IV Fire and life safety (having 2 hours fire resistance in accordance to ASTM E119-12 and B3476 part 6 and 7 class O) sandwitched between two aluminium sheets (each 0.5 mm thick of AA 6005/AA3105 grade) The aluminium composite panel cladding sheet shall be coll coated with kynar 500 based PVDF/Lumifion based fluropolymer resin (having 70:30 ratio of PVDF and acrylic) coating of approved colour and sgehade on top face and polymer (service) coating of botton face using stainless steel screws,nuts, bolts, washers, cleats, weather silicon sealent, backer rods eto overall weight of the ACP shall not be less than 7.5 specified Kilogram/Square Metro) (SSR Item No: 51,100) (PMC Bhavan) Unique No (16244) Rate List Year (2024-2025) ITEM NO: 19 Providing & fixing 1/2,1/4to 1 tk Teakwood leaping patti Including polishing etc completed. (SSR Item No: 62.27) (PMC Bhavan) Unique No (16570) Rate List Year (2024-2025) ITEM NO: 20 Providing & fixing plain glass of 4 mm thickness for window and wherever necessary as per dopt, Instructions, It Includes providing & using glezing clips, Putty of Kumbh Company etc. complete. (SSR Item No: 69.01) (PMC Bhavan) Unique No (17018) Rate List Year (2024-2025) ITEM NO: 21 Providing & fixing plain glass of 10 mm thickness for window and wherever necessary as per dopt. Instructions, It Includes providing & using glozing clips, Putty of Kumbh Company oto. complete. (SSR Item No: 69.05.) (PMC Bhavan) Unique No (17022) Rate List Year (2024-2025) ITEM NO: 22 Providing and fixing solld core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as por dotalled drawings approved face veneers 3 mm thick on both faces or as directed, all necessary boads, mouldings and lipping, wrought iron hold fasts, chromlum plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. (SSR Item No: 39.9) (PMC Bhavan) Unique No (15683) Rate List Year (2024-2025) ITEM NO: 23 Fiber Cushion Chairs Providing (ORNET MAKE) flbor cushion chairs of Supremo, Neelkamal brand. Note: Cushlon should be on both Seat & Backrest. (SSR Item No: 62.32) (PMC Bhavan) Unique No (16580) Rate List Year (2024-2025) ITEM NO: 24 C3 MB Supplying and placing ergonomically designed, comfortable & aesthetically appealing Medium back chair. The seat shall be made of 15mm thick hot pressed plywood with HR polyurethane foam 50mm thick having density 40kg/m³ upholstered with leatherite tapestry in light green colour with 0.8mm thick and 535 GSM and the back shall be made of double layered moulded hot pressed malaysian plywood (12+6)mm thick with HR polyurethane foam 40mm thick having density 32kg/m³ upholstered with leatherite in light green colour with 0.8mm thick and 535 GSM. Seat and back shall be joined with HR steel sheet. The armrest shall be used PP arm completely joint with seat and back. The chair shall have swivel tilt revolving mechanism with single position locking and tilt tension adjustment. The pneumatic seat height adjustable 100mm with BIFMA standard class-3 gaslift. The Pedestal shall be made up of injection moulded black nylon having pitch circle Dia 700 mm fitted with 5 nos. 50mm twin wheel castors which shall be made of injection moulded black nylon 30% glass filled having self lubricating property for friction free movemen with BIFMA standards. The Seat size shall be 485±10 mm(W)X485±10 mm(D) and back size shall be 555±10 mm(H) from seat & overall height = 975±10 mm. The material shall be supplied from ISO 9001:2015, ISO 14001:2015, ISO 45001: 2018, BIFMA, AIOTA, GREENGUARD and approved by Consultant and Engineer in charge. Make of furniture: Godrej/Featherlite/Nilkamal & other similar type of manufacturing company. (SSR Item No: 62.115) (PMC Bhavan) Unique No (16657) Rate List Year (2024-2025) ITEM NO: 25 Providing and Fixing Rollar Blinds AMI Make or approved make & shade of 38mm round Aluminium channel with Blackout fabric & telting with chain (Ball) system with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work) (SSR Item No: 51.19) (PMC Bhavan) Unique No (16170) Rate List Year (2024-2025) ITEM NO: 26 PVC Carpet Providing 1.5 mm thick pvc carpet of approved design n color & fixing at site as per site in charge instructions etc. completed.Note: - Dimensions would be considered as per actual carpet size fixed at site. (SSR Item No: 62.33) (PMC Bhavan) Unique No (16581) Rate List Year (2024-2025) ITEM NO: 27 Providing and fixing 15 mm thick eco-friendly densified edge calcium silicate false ceiling of approved texture spintone/cosmos/hexa or equivalent of size 595mm x 595mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanising at @12 gm/sq.m including both sides) consisting of main T runner suitably spaced at joints to get required length and size 24X38mm. made from 0.33mm thick(minimum) sheet, spaced 1200mm center to center and cross T of size 24X28mm made of 0.33mm thick(minimum) sheet to be interlocked at the middle of the 1200x600 mm panel to form the grid of size 600x600mm resting on periphery walls/partitions on a perimeter wall angle precoated steel of size 24x24x3000 made of 0.4 mm thick (minimum) sheet with the help of all plugs at 450mm and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture (spintone/cosmos/hexa) in the grid, including light fittings, fixtures smoke detectors etc., wherever required. Main T runners suspended from ceiling with using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling using 12.5mm dia. And 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel levels clips of size 85x30x0.8mm, spaced at 1200mm center to center along main T bottom exposed with 24mm of all T-sections shall be prepainted with polyester baked paint, for all heights, as per specifications, drawings etc. complete. (currently this item should be used only for VIP cabins) (SSR Item No: 38.39) (PMC Bhavan) Unique No (15660) Rate List Year (2024-2025) ITEM NO: 28 Sofa Set 3+1+1 Providing & fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length: 182.5 (cms) Breadth (cms): 100 (cms) Height (cms): 100 (cms) Weight (Kilograms): 66 (Kilogram) Seating Capacity: Five Seat (SSR Item No: 51.53) (PMC Bhavan) Unique No (16203) Rate List Year (2024-2025) ITEM NO: 29 Providing & fixing all Furniture hardware as per site in charge instructions Including all brass hardware fittings. (3 to 5sizes). Locks (For cupboards & wardrobes) (SSR Item No: 62.29-C) (PMC Bhavan) Unique No (16574) Rate List Year (2024-2025) ITEM NO: 30 Providing & fixing all Furniture hardware as per site in charge instructions Including all brass hardware fittings. (3 to 5 sizes) Hinges (SSR Item No: 62.29-A) (PMC Bhavan) Unique No (16572) Rate List Year (2024-2025) ITEM NO: 31 Providing & fixing all Furniture hardware as per site in charg instructions Including all brass hardware fittings. (3 to 5 sizes) Handles (SSR Item No: 62.29-B) (PMC Bhavan) Unique No (16573) Rate List Year (2024-2025) ITEM NO: 32 Building (Bd-Q: Wood work) Tower Bolt brass oxidised 10 mm dia. Length 150 mm (SSR Item No: 49.Q-17) (PMC Bhavan) Unique No (17509) Rate List Year (2024-2025) ITEM NO: 33 Door Closure: (For 2 Hr fire Rated EN-3 Door Closure) Supplying fitting & fixing Surface mounted overhead Door Closer for 2 hour fire rated doors of different size (eg size -EN-3 for leaf width upto 900mm) CE certified, marked & conforming to EN 1154 of approved quality (Internationally reputed brand like Dorma, Geze. Hafele, Assabloy & Magnum etc.) fitted and fixed Complete as per direction & satisfaction of Engineer -in Charge including all taxes & incidental charges (SSR Item No: 51.J-176) (PMC Bhavan) Unique No (16273) Rate List Year (2024-2025) ITEM NO: 34 Building (Bd-T: Doors and windows) Mortice lock superior (SSR Item No: 49.T-34) (PMC Bhavan) Unique No (17604) Rate List Year (2024-2025) ITEM NO: 35 Providing and applying priming coat on concrete/ masonary/Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. (SSR Item No: 35.21) (PMC Bhavan) Unique No (15571) Rate List Year (2024-2025) ITEM NO: 36 Water bound distemper: Providing and applying water bound distemper along with primer coats including scaffolding if necessary, cleaning and preparing the surface etc. complete Recommended companies: Asian, neroleck, Dulex (SSR Item No: 63.1) (PMC Bhavan) Unique No (16691) Rate List Year (2024-2025) ITEM NO: 37 Providing and applying interior wall finish luster of approved make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applyingwall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat or wall finish Lustre with mineral turpentine 7 to 9% with brush and Oll with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity. (With prior approval of S.E.) (SSR Item No: 36.20) (PMC Bhavan) Unique No (15594) Rate List Year (2024-2025) ITEM NO: 38 Providing and applying two coato of oxterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface ,applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item Number 15 to 18 prior approval of Superintending Engineer will be necessary (SSR Item No: 35.26) (PMC Bhavan Unique No (15576) Rate List Year (2024-2025) ITEM NO: 39 Providing and applying two coats of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc, complete. (SSR Item No: 35.12) (PMC Bhayan) Unique No (15563) Rate List Year (2024-2025) ITEM NO: 40 Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar Including joint filling with white/colour cement slurry cleaning curing etc. complete. (SSR Item No: 33.27) (PMC Bhavan) Unique No (15495) Rate List Year (2024-2025) ITEM NO: 41 Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc, complete. (SSR Item No: 33.24) (PMC Bhavan) Unique No (15492) Rate List Year (2024-2025) ITEM NO: 42 Providing Water proofing treatment to old terraces by removi existing treatment, sealing of cracks by non shrink crack compound applying first coat of polymer modified seml-visco paste prepared by mixing polymer of approved make and Ceme in 1 2 proportion (1 litre polymer 2 Kg Cement Jor Rohnex wat proofing. system in two coats (1kg powder, 700 ml water ar polymer jelly for first coat & 1 kg powder 500 ml water & polym jelly for second coat) to a neatly cleaned and dust free concre surface and upto 300 mm over parapet wall prepared b removing loose and deposited material with brush and wate followed by two coat of flexible cementious coating of approve make after laying glass fibre mesh of 10 x 10 specification c approved make over tacky surface of first coat of polyme followed by second coat in transverse direction, sprinkling coars sand over it, followed by protective mechanical cover of 40 mm t 75 mm. thick cement concrete of 1.2.3 proportion using coars aggregate of 10 MSA and water proofing compound of approved make along with 14 guage 40 mm x 40 mm size welded mesh and and polypropylene fibres @ 125 gm per bag of cement within It conforming to IS in pannels of 3m/4m or as per site condition & filling the joints with polt sulphide sealant(0.12 kg per sq mt.) afte curing, including providing holler with drip moulds at the junction and finishing the concrete surface with neat cement slürry including curing as directed and ponding the surface as directec etc. complete covering 10 years guarantee against leakproofness on Court Fee Stamp Paper of Rs. 100 (SSR Item No: 52.26) (PMC Bhavan) Unique No (16299) Rate List Year (2024-2025) ITEM NO: 43 Providing and fixing European type white glazed earthenware coupled closet symphonic trap with symphonic low level white glazed 10 litres cistern with black backlite seat with all necessary pipe connection etc. complete. (SSR Item No: 42.34) (PMC Bhavan) Unique No (15886) Rate List Year (2024-2025) ITEM NO: 44 Providing and fixing white european type wall-hung pan, of size 350mm x 355mm x 570 mm concealed flush tank with floor-mounting frame installing kit and drain pipe connection set for wall hung WC, with approved make square control plates including soil pipe, vent pipe upto the outside face of wall, 100mm dia C.I. plug bend inlet pipe all fittings, cutting & making good walls, floors etc. complete. (SSR Item No: 48.41) (PMC Bhavan) Unique No (16110) Rate List Year (2024-2025) ITEM NO: 45 Providing and fixing orissa type colour glazed earthenware 625 x 450 mm. w.c. pan including trap, C.I. soil and vent pipe upto the out side face of wall including 100 mm. dia. C.I. plug, bend, 15mm. thick 10 litre PVC flushing cistern with all necessary pipe connection etc. complete. (SSR Item No: 42.35) (PMC Bhavan) Unique No (15887) Rate List Year (2024-2025) ITEM NO: 46 Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall (SSR Item No: 41.57) (PMC Bhavan) Unique No (15832) Rate List Year (2024-2025) ITEM NO: 47 Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (SSR Item No: 42.55) (PMC Bhavan) Unique No (15907) Rate List Year (2024-2025) ITEM NO: 48 Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (SSR Item No: 42.57) (PMC Bhavan) Unique No (15909) Rate List Year (2024-2025) ITEM NO: 49 Providing, laying and fixing P.V.C. pipe of 75mm dia, with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (SSR Item No: 42.27) (PMC Bhavan) Unique No (15879) Rate List Year (2024-2025) ITEM NO: 50 Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (SSR Item No: 42.28) (PMC Bhavan) Unique No (15880) Rate List Year (2024-2025) ITEM NO: 51 Building (Bd-V: Water supply and sanitory fittings)P.V.C. flexib Waste Pipe 32 mm dia (SSR Item No: 49.V-74) (PMC Bhavan). Unique No (17745) Rate List Year (2024-2025) ITEM NO: 52 Building (Bd-V: Water supply and sanitory fittings)12mm flexibl inlet pipe connection (SSR Item No: 49.V-143) (PMC Bhavan) Unique No (17814) Rate List Year (2024-2025) ITEM NO: 53 Building (Bd-V: Water supply and sanitory fittings)C.P.Bib coc with wall flange aqua make queens collection (quarter turn fitting (SSR Item No: 49.V-236) (PMC Bhavan) Unique No (17907) Rate List Year (2024-2025) ITEM NO: 54 Providing and fixing C.P. 2 Way BIB cock with wall flange o approved make including necessary sockets/ union nut etc complete as directed by Engineer in charge. (SSR Item No: 48.27) (PMC Bhavan) Unique No (16097) Rate List Year (2024-2025) ITEM NO: 55 Providing and fixing 25mm diameter concussion push button type brass/gun metal self- closing tap including necessary socket complete (SSR Item No: 41.53) (PMC Bhavan) Unique No (15828) Rate List Year (2024-2025) ITEM NO: 56 Lowering down the debris obtained from breaking and removing the cement plaster / burnt brick masonry of the first floor by any means without causing dust-nuisance and damage to structure, stacking the same as and where directed including cleaning the site complete. SSR Item No: 46.59) (PMC Bhavan) Unique No (16064) Rate List Year (2024-2025) TEM NO: 57 Transportation of material obtained from excavation including soil, Cu.M rubble, bricks, RCC concrete, kerb stones, steel railing, iron ipes, channels etc. Obtained from excavation, dismantling, Dading in a Truck of minimum 5 Cu M capacity or designed apacity and transporting within the municipal limits or any esignated place, unloading, stacking or spreading of material tc. complete. As directed by Engineer In charge SSR Item No: 78.36) (PMC Bhavan) nique No (17223) Rate List Year (2024-2025) ITEM NO: 58 Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (SSR Item No: 26.33) (PMC Bhavan) Unique No (15352) Rate List Year (2024-2025)

Key Value

Document Fees
INR 6079 /-
Tender Value
INR 67.62 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail