Tender For Various development Works At Swami Ramdev Maharaj Sports Complex.-ITEM NO: 1 Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete (SSR Item No: 46.19) (PMC Bhavan) Unique No (16026) Rate List Year (2024-2025) ITEM NO: 2 Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. (SSR Item No: 46.12) (PMC Bhavan) Unique No (16019) Rate List Year (2024-2025) ITEM NO: 3 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means (SSR Item No. 21.02) (PMC Bhavan) Unique No (15202) Rate List Year (2024-2025) ITEM NO:4 Transportation of material obtained from excavation including soil, Cu.M rubble, bricks, RCC concrete, kerb stones, steel railing, iron pipes, channels etc. Obtained from excavation, dismantling, loading in a Truck of minimum 5 Cu M capacity or designed capacity and transporting within the municipal limits or any designated place, unloading, stacking or spreading of material etc. complete. As directed by Engineer In charge (SSR Item No: 78.36) (PMC Bhavan) Unique No (17223) Rate List Year (2024-2025) ITEM NO: 5 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. (SSR Item No: 21.38) (PMC Bhavan) Unique No (15233) Rate List Year (2024-2025) ITEM NO: 6 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. (SSR Item No: 21.37) (PMC Bhavan) Unique No (15232) Rate List Year (2024-2025) ITEM NO: 7 Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR Item No: 24.10) (PMC Bhavan) Unique No (15312) Rate List Year (2024-2025) ITEM NO: 8 Supply of Titanium FIFA Certified Soccer Turf EB-50 MM Series Grass:- Material /Dtex: PE12000 Structure Monofilament Yarn Pile Height (mm): 50 10cm): 15 Stitch rate (Per 10 cm):15 Guage (inch): 5/8 Stitches/m2:9450 Roll (Mtr) Width x Length: 4 or 2 x 30,5 Breaking: Triple Layers High wear resistance & perfect ball roll properties Economical System & UV Resistance Creative Technology & Quick Construction Natural & Beautiful appearance Good performance Reinforced Playability 3 years Turf Warranty 1 year Glue Warranty SBR Black Rubber Granuels in size of 8mm to 2.4mm 10kg/m2 Silica Sand 18kg/m2 Silica Sand 18kg/m2 Tape & European PU glue with hardner (Ration 2:1) According to Layout Colour-Green Plan Installation Installation of Turf with inhouse trained installation team Infill of Silica Sand & Granules Brushing & Line Marking. Including Transportation (SSR Item No: 72.4) (PMC Bhavan) Unique No (17099) Rate List Year (2024-2025) ITEM NO: 9 Cricket Pitch Turf Providing & Fixing Full Pitch Synthetic Turf 15 mm thk. of size 30 M X 2.75 M. over Tremix surface (Excluding Tremix) with suitable arrangement/adhesive as per manufacturers specification rolling with hand roller for removing air gaps as directed by Engineer In charge etc. complete. (SSR Item No: 72.1) (PMC Bhavan) Unique No (17096) Rate List Year (2024-2025) ITEM NO: 10 Providing & Fixing nylon net 35mmx35mmx1.75mm including top and side. (SSR Item No. 72.2) (PMC Bhavan) Unique No (17097) Rate List Year (2024-2025) ITEM NO: 11 Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. (SSR Item No: 42.52) (PMC Bhavan) Unique No (15904) Rate List Year (2024-2025) ITEM NO: 12 Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted/welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. (SSR Item No: 23.01) (PMC Bhavan) Unique No (15297) Rate List Year (2024-2025) ITEM NO: 13 Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete. (SSR Item No: 23.12) (PMC Bhavan) Unique No (15307) Rate List Year (2024-2025) ITEM NO: 14 Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters (SSR Item No: 42.53) (PMC Bhavan) Unique No (15905) Rate List Year (2024-2025) ITEM NO 15 Providing and fixing colour coated Zincalume (R) AZ150 (min 150 gms/sq.mt total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), Hi-strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon)coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coal on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fiuting in the five pan at nominal 180-250 mm center to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/Square Metre) with COLORBOND (R) steel quality super durable polyester paint (SSR Item No: 38.34) (PMC Bhavan) Unique No (15655) Rate List Year (2024-2025) ITEM NO: 16 Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints. raking out joints, watering and scaffolding etc. Complete (SSR Item No. 27.13) (PMC Bhavan) Unique No (15381) Rate List Year (2024-2025) ITEM NO: 17 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. (SSR Item No: 32.11) (PMC Bhavan) Unique No (15444) Rate List Year (2024-2025) ITEM NO: 18 Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt. (SSR Item No: 44.10) (PMC Bhavan) Unique No (15994) Rate List Year (2024-2025)
