Tender For Construction Of Security Fencing Around Chichdoh Barrage Premises
Tender Value
48.43 Lakhs
Estimated cost
Bid Submission
12 Nov 2025
0 days left
EMD
49000
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chamorshi → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Security Fencing Around Chichdoh Barrage Premises
BOQ
| Sl. No. | Item Description |
| 1 | Item no 1: Clearing grass and removal of rubbish upto a distance of 50 metres outside the periphery of the area . |
| 2 | Item no 2: FRP Beam Crash Barrier -- Type -A, W : FRP Beam Crash Barrier (Providing and erecting a W \"FRP beam crash barrier comprising of 3 mm thick corrugated sheet FRP beam rail, 70 cm above road / ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:14856 (2000) and IS:18319 (2015), FRP beam rail to be fixed on the vertical post with a spacer of channel section150 x 75 x 5 mm, 330 mm long complete as per clause 810)\" As directed by Engineer incharge. |
| 3 | Item no 3: Providing and fixing in position Guard Railing as per Drg.No.15 Type C dt.20-4-79, with 3 rows of 40 mm dia.G.I.pipe 30 cm apart and fixed in M.S.channels of section 100 x 50 x 6 mm spaced 2.5 C/c 1:2:4 c.c. bedding of size 45 x 30 x 30 cm. as per detailed drawing, with 3 coats of approved of yellow and black paint including necessary excavation in any strata. |
| 4 | Item no 4: Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick on vertical M.S. Angles of 40 x 40 x 6 mm size,excluding excavating pits for foundation and excludingembedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16 mm dia as hold fast including weldinglink with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S.Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S.flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete. |
| 5 | Item no 5: Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means |
| 6 | Item no 6: Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. |
| 7 | Item no 7: Providing and laying Cast in situ cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 8 | Item no 8: Providing and laying in situ /ready mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc |
| 9 | Item no 9: Providing and laying Cast in situ cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 10 | Item no 10: Providing and laying Cast in situ cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc |
| 11 | Item no 11: Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 12 | Item no 12: Providing fly ash brick masonry with conventional/ I.S.type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints,racking out joints watering and scaffolding etc. complete. |
| 13 | Item no 13: Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. |
| 14 | Item no 14: Providing and applying colour-wash of approved colour and shade in one coat to new surface including scaffolding, brushing and brooming down (excluding base coats of white wash) etc. complete |
AI Tender Summary
Tender Timeline
Nov 04, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 14, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender