Tender For Miscellaneous Electrical Work In C2 Qtr At Cpmg Office Compound Ambala Hr.; 1 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 2 x 4.0 mm² + 1 x 4.0 mm² earth wire 20 m 373 m 7460.00 1.14.3b) 4 x 4.0 mm² + 2 x 4.0 mm² earth wire 15 m 587 m 8805.00 1.14.82 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. a) 15/ 16 amps switch 1 nos 176 each 176.00 1.24.3b) 3 pin 15/ 16 amps socket outlet 4 nos 219 each 876.00 1.24.53 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required a) 1 or 2 Module (75mm x 75mm) 8 nos 354 each 2832.00 1.27.14 Supplying and fixing PVC batten/ angle holder including connections etc. as required. 2 nos 110 each 220.00 1.585 S/F following rating MCB suitable for inductive load of following pole in the existing MCB DB complete with connections, testing and commissioning etc. as reqd. a) 5-32 A, 10 kA 240 volts, C curve DP MCB Modular type 4 nos 1099 each 4396.00 MRSupplying, Installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mmFRLS/HFFR/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminiumhousing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) a) 40 watt 2 nos 721 each 1442.00 8.9.47 Supplying, Installation, Testing and Commissioning of 200/250 mm sweep PVC body exhaust fan with automatic front shutter, rust proof body and blades, noiseless and light in weight suitable for operation on 220 V, 50 Hz AC supply and connection with 1.5 mm² FRLS/HFFR PVC insulated, copper conductor, single core cable and earthing etc. complete as required. (M/s: Havells Model Thrill Aiv DX or similar superior make and model of Atomberg/Khaitan/ Usha) 2 nos 2252 each 4504.00 MR 8 Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180- 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient temperature). Inverter Type - Cooling only a) 1.5 TR with 5 Star BEE Rating 1 nos 43539 each 43539 32.2.3b) 2.0 TR with 5 Star BEE Rating 3 nos 57396 each 172188 32.2.49 Supplying, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : a) 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm 20 m 256 m 5120 31.14.1b) 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm 10 m 487 m 4870 31.14.3c) 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm 10 m 615 m 6150 31.14.410 Supplying and drawing of 3 x 4. sqmm PVC insulated and pvc sheathed copper conductor power cable in the existing conduit including connection, testing and commissioning etc. complete as required. 20 m 357 m 7140 MR11 S/ fixing of powder coated wall/ floor mounted MS stand for keeping outdoor units on floor/ walls including nuts, bolts washer etc complete as reqd. 4 No. 1428 Each 5712.00 MR12 Supplying and fixing of 25 mm dia B class, SDR 11, CPVC drain pipe for AC with all accessorie like elbows, tees, sockets etc including cutting, jionting with solvent, cutting the wall and making good the same in case of recess etc complete as reqd. 25 m 219 m 5475 MR13 Supplying, installation, Testing & Commissioning of copper wounded with TDR automatic voltage digital display wall mounted Stabilizer (160V-270V) for 1.5 ton inverter Ac having input voltage 160-285 volt and suitable output voltage, 50Hz, 1 phase ac supply, connection etc complete as reqd. (M/s VGuard or similar superior make) 1 nos 7347 each 7347 MR14 Supplying, installation, Testing & Commissioning of copper wounded with TDR automatic voltage digital display wall mounted Stabilizer (160V-270V) for 2 ton inverter Ac having input voltage 160-285 volt and suitable output voltage, 50Hz, 1 phase ac supply, connection etc complete as reqd. (M/s VGuard or similar superior make) 1 nos 8302 each 8302 MR15 S/F of 3/5 watt, wall mounted bedside LED light with swing arm to adjust light focus as requirement suitable for operation on 230 V, 50 Hz AC supply including connections with 1.5 mm² FRLS copper conductor cable, testing and commissioning etc complete as reqd. (M/s Philips/ Havells / ss make) 4 nos 2778 each 11112 MR16 SITC of wall mounted 90 cm filterless electric chimney having Stainless Steel body, 1400-1600 m³/ hr suction capacity suitable for kitchen and 4-5 burner stove with all accessories i/c exhaust pipe of suitable lenght and size including making opening of suitable size complete as reqd. (M/s Elica/Fabre or ss make) 1 nos 29950 each 29950.00 MR17 Dismantling of old existing indoor and outdoor unit of split AC including disconnection of copper pipes and power cable etc and placing at the desire location in the building, make it ready for installation of new AC etc. complete as required. 2 job 1521 each 3042 MR
