|
| 1 | Laying and Jointing PVC Pipe. Heading |
| 2 | Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. |
| 3 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required. |
| 4 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 5 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 6 | Supplying and laying of 90 mm dia (OD-90 mm & ID-76 mm nominal) sizeDWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required |
| 7 | Supplying and Laying of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1 kv grade ofsize 3.5 x 120 sqmm,in the existingmetal pipe/ open as required. Conf. to IS:7098 part - I |
| 8 | Supplying & laying of G.I. pipe of 50 mm dia (medium duty ) G.I pipe in floor/wall/road for protection of UG cable including cutting the wall/floor/metalled road and making good the same as required. |
| 9 | Supplying and Laying of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1 kv grade ofsize 3 x 10 sqmm,in the existingmetal pipe/ open as required. Conf. to IS:7098 part - I |
| 10 | Supplying & fixing of loop box with (180 x 180 x 120) having 100 Amps connector strip, mcb & connection to LED street light on existing pole. as required. |
| 11 | S/I/T/C of outdoor type joint box,made out of 16 SWG CRCA sheet duly primed & painted with synthetic enamel paint of size 450 mm(height) x 450 mm (width) x 300 mm deep having 200 amps, 04 nos insulated aluminium bus bars and suitable size insulator,& angle iron frame of base size 450 mm x 300 mm with 600 mm long legs made out of 45 mm x 45 mm x 5 mm thick angle & grouting the same in suitable cement concrete foundation, etc. as requiredAs per direction of Engineer Incharge. |
| 12 | S/ITC of outdoor type feeder piller, double door made out of 16 SWG CRCA sheet duly primed & painted with synthetic enamel gray paint of size 1000 mmx 900 mmx 350 mm deep having200 amps, 04 nos insulated aluminium bus bars and to accommodate following accessories, front & back openable door, R-Y-B LED indicatorsand P & F of internal connection with suitable size of copper wires, following accessories & angle iron frame of size 900 mm x 350 mm with 600 mm long legs made out of 40 mm x 40 mm x 5 mm thick angle & grouting the same in suitable cement concrete foundation, arrangement for incoming & outgoing cables, cable termination, earthing, locking, interconnection etc. as required. (i) 125 Amps, 4 pole, 415 volts, 18KA, 50 Hz MCCB make L&T - 2 Nos (ii) 63 Amp, 4 pole, MCB, 10 KA, C curve, 415 V, 50 Hz make L&T - 02 Nos(iii)125 Amps, 4 pole, 415 volts, 50 Hz Onload open execution changeover make L&T - 1 No(iv)63 Amp, DP, MCB, 10 KA,C curve, 240 V, 50 Hz make L&T/ Havells/ Standard/ HPL/ Indoasian- 06 Nos(v) VAF + PF meter, C1 make L&T cat No. WL411010OOOO make L&T - 01 Nos(vi) Cu wire lead ( Make KEI)(vii)Indicator LED Lamp (R,Y,B)-03 Nos(viii) Danger plate(ix)Thimble of suitable size |
| 13 | Add GST 18 % on DSR 2022 item MF factor @ 0.0633 on DSR items (Sr No. 1 to 5) (Rs. 1,45,964.00) |
| 14 | Labour cess @ 1 % |
