Tender For Electrical Works For The Establishment Of Bio Ccus Facility In Ccgm At Csir Neeri Nagpur.; 1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A. 2 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. 3 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. 4 Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 5 Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 4 sq. mm + 1 X 4 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 6 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, C curve including connections, painting etc. as required. 7 Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc., including supplying and fixing ball and socket arrangement, 2 Nos. down rods of 20 mm dia X 1.6 mm thick steel conduit upto 30+20 = 50 cm length, painting and wiring the down rods and connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. 8 Installation of exhaust fan in the existing opening, including making good the damage and by providing proper covering to remaining required portion, connection,testing, commissioning etc. as required upto 450 mm sweep. 9 Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. 10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. 11 Supplying and fixing 25 A rating, four pole, (three phaseand neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 12 Supplying and fixing 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of Triple pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. 13 Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required. 14 Supplying and fixing 4 way (4 + 12), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. 15 Supplying and fixing extra conduit down rod of 40 (20+20) cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored). 16 Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of CRCA Sheet Body (Thickness ≥ 0.50 mm) body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140-270 Volt, frequency 50 Hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends, CCT 6500°K (As per ANSI Bin), Standard Deviation Color Matching <3, Maximum power consumption should not more than the 18- 22 watt rating and Fixture shall be of relevant BIS standard and trade mark certificate. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. Complete in all respect i/c connections with 1.5 sq. mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output. LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). 17 Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum), class of insulation: B, 3 nos. metal ( Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. complete, Color of fan is White/Brown, as req. 18 Dismantling of existing wiring, switchboards, celing fittings, T.L 20 watts, wall fan, Switch board with complete accessories in Process Lab., Hall of CCGM as required. Dismantled material to be handed over to department as per instruction of department. 19 Supplying exhaust fan A. C. 230 V. of 300 mm sweep. Air Delivery 19 CMM, 55 Watts, 900 RPM, Dynamically balanced blades for vibration free rotation, aluminium die-cast body to ensures long life & all accessories etc. (With two years guarantee) 20 Supplying of outdoor louvers / shutters: Providing louvers / shutters of size 300 mm made up of GI sheet of size 0.7 mm thick, and required frame, necessary arrangement for lifting of louvers. 21 Supply, installation testing and commisioning of Wall Fan aircirculator400mm.sweep oscillating type, wall mounting 1320 RPMwithoutspeedregulator, overheat protectionunit,totallyenclosed,flameproofmotorsuitable protectionunit,totallyenclosed,flameproofmotorsuitable metreof3coreleadwireandwithmoistureprooftreatmentto winding and with E class insulation. 22 LED waterproof outdoor wall lights: Supply of LED waterproof outdoor 1-Way wall light fitting of warm white colour, 6/7 W Watt, Dimension appox. - 8 L x 8 W x 7.5 H cm,Colour: as required, Total lumen output 270, Light colour - 2700-6500K, Mains power 220-240 V, IP code- IP65, Class of protection-Class II, Eye Comfort, body material Polycarbonate. As required. Warranty of 1 year.
