|
| 1 | Earthworkinexcavationinfoundation,trenchesetc.includingdressingofsidesand rammingofbottoms,includinggettingouttheexcavatedmaterial,refillingafterlaying pipe/foundation and disposal of surplus excavated material ata lead upto 50m suitable siteasperdirectionofEngineerforfollowingdepths,belownaturalground/Roadtop level.Inalltypessoils/saturatedsoilsuchasmoorum,sand,sandysilt, clay, black cotton soil, kankar, etc. Depth upto 1.5 m |
| 2 | Dismantling of existing structures like culverts, bridges, retaining walls, CC road and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by Engineer. Cement Concrete Grade M-15 and above and PCC blocks |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centeringand shuttering-All work upto plinth level : 1:4:8 (1 Cement : 4 Fine / coarse sand : 8 graded stone aggregate 40mm nominal size) |
| 4 | Providing and laying in position specified gradeof reinforced cementconcreteexcluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level : 1:2:4 (1 Cement : 2coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 5 | Random rubble masonry with hard stone in foundation and plinth : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 6 | Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto two stories in all shapes and sizes in : In cement mortar 1:4 (1 cement : 4 coarse sand) |
| 7 | Half brick masonry with bricks of class designation 75 in superstructure above plinth level uptotwo stories. Cement mortar 1:4 (1 cement :4 coarse sand) |
| 8 | CementplasteringincludingT&P,scaffolding,materialandcompletelabour,including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix :1:4 (1 cement : 4 fine/ coarse sand) |
| 9 | Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead andifrequiredanglethresholdofmildsteelangleofsection50x25mm,orbasetiesof1.25mm pressedmild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortarguards,lockstrike-plateandshockabsorbers asspecifiedandapplying acoatof approvedsteelprimerafterpre-treatmentofthesurfaceasdirectedbyEngineer-in- charge:Profile E |
| 10 | Centering and shuttering at all levels including at all levels including strutting, propping etc. andremovalofformfor:Susupendedfloors,roofs,landings,balconiesandaccess platform : |
| 11 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircasesuptotwostoriesexcludingthecostofcentring,shuttering,finishingand reinforcement:1:1½:3(1cement:1½coarsesand:3gradedstoneaggregate20mmnominal size) |
| 13 | Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placingin position and binding all complete. Thermo-Mechanically Treated bars. |
| 14 | 24mmthickfactorymadePVCdoor shutters madeofstyles andrailsof auPVChollow section of size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by means of M.S. galvanised/ plasticbracketsofsize75x220mmhavingwallthickness1.0mmandstainlesssteel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm ± 0.1 mm wall thickness. The lock rail made up of \"H\" section, a uPVC hollow section of size 100x24 mm and 2 mm ± 0.2 mm wall thickness fixed to the shutter styles by meansof plastic/ galvanisedM.S.\"U\"cleats.Theshutter frame filledwitha uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mmand1mm±0.1mmwallthickness.Thepanelsfilledverticallyandtiebarattwo placesbyinsertinghorizontally6mmgalvanisedM.S.rodandfastenedwithnutsand washers, complete as per manufacturer\"s specification and direction of Engineer-in-charge.(For W.C. and bathroom door shutter). |
| 15 | 30mmthickfactorymadepanelPVCdoorshutterconsistingofframemadeoutof M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottomrails.M.S.frameshallhaveacoatofsteelprimersofapprovedmakeand manufacture. M.S. frame covered with 5mm thick heat moulded PVC\"C\"channelofsize30mmthickness,70mmwidthoutofwhich50mmshallbeflatand 20mmshall betaperedin 45degreeangleon either sideforming styles;and 5mmthick,95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of5mmthickbothsidePVCsheettobefittedintheM.S.framewelded/sealedtothe styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mmwidthistobestuckontheinteriorsideofthe\"C\"ChannelusingPVCsolvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer’specification& drawing (for W.C. and bathroom door shutter). |
| 16 | ProvidingandfixingGranitestoneslabmirrorpolishedandmachineedgecutinwalls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar1:3(1cement:3coarsesand)jointingwithwhitecementmortar1:2(1whitecement:2marbledust)withpigmenttomatchtheshadeofthemarbleslabincluding grinding, rubbing and polishing complete. Upto to 1500 Cm2 Tiles |
| 17 | P & F 1st quality Vitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufacture) with water absorption less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grouting the joints with white cement and matching pigment etc complete Size 600 mm X 600 mm. |
| 18 | Providingandfixingdrycladdingupto10metreheightswith30mmthickgangsawcut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steelframeworkand/orwiththehelpofcramps,pinsetc.andsealingthejointswith approvedweathersealantasperArchitecturaldrawinganddirection of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall bepaid for separately.) White sand stone |
| 19 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). |
| 20 | Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand) including making the necessary chases in stone and holes inwalls wherever required. |
| 21 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 22 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlockedtogetherthroughtheirentirelengthand jointed togetherattheendbyend locks mounted on specially designed pipe shaft with brackets, side guides and arrangementsforinsideandoutsidelockingwithpushandpulloperationcomplete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top cover of required thickness for rolling shutters. 80x1.25mm M.S. laths with1.25 mm thick top cover. |
| 23 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. |
| 24 | Distempering with dry distemper of approved brand and manufacture (two or more coats)and of required shade on new work, over and including priming coat of whiting to give an even shade. (Internal Paint) |
| 25 | Finishingwalls with water proofing cementpaintof required shade:Newwork(Twoormore coats applied @ 3.84 kg / 10 sqm.) (External Paint) |
| 26 | Sainitary ItemsProviding and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard makeandmosquitoproofcouplingofapprovedmunicipaldesigncompleteincluding painting of fittings and brackets, cutting and making good the walls and floors whereverrequired : W.C. pan with ISI marked white solid plastic seat and lid. |
| 27 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete,includingpaintingoffittingsandbrackets,cuttingandmakinggoodthewalls andfloorswhereverrequired:Rangeoffoururinalbasinswith10litrewhiteP.V.C.automatic flushing cistern. |
| 28 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cuttingandmakinggoodthewallsandfloorswhereverrequired:2556,C.I.trapwith outletgratingandothercouplingsinC.P.brassincludingpaintingoffittingsandcutting andmakinggoodthewallsandfloorswhereverrequired:2556,C.I.trapwithoutlet gratingandothercouplingsinC.P.brassincludingpaintingoffittingsandcuttingandmaking good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern |
| 29 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device(handlelever)conformingtoIS:7231,withallfittingsandfixturescomplete including cutting and making good the walls and floors wherever required : White Vitreous chinaOrissapatternW.C.panofsize580x440 mm with integral type foot rests. |
| 30 | Providing and fixing wash basin with C.I. brackets, IS mm C.P. brass pillar taps, 32 mm C.P.brasswasteofstandardpattern,includingpaintingoffittingsandbrackets,cuttingand making good with wherever require : White Vitreous China Flat back wash basin size 630 x450 mm with single 15mm C.P. brass pillar taps |
| 31 | Providingandfixing600x450mmbevellededgemirrorofsuperiorglass(ofapproved quality)completewith6mmthickhardboardgroundfixedtowoodencleatswithC.P.brass screws and washers complete. |
| 32 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting andmaking good the walls etc. Internal work - exposed on wall 15 mm diameter nominal bore. |
| 33 | ProvidingandfixingC.P.brasslongnosebibcockofapprovedqualityconfirmingtoISstandard and weighing not less than 690 gms. 15 mm nominal bore. |
| 34 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI :12701marked withcover andsuitablelocking arrangementand making necessaryholes for inlet, outlet and over flow pipes but without fittings and the base support for tank. |
| 35 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approvedmake confirming to IS : 8931. 15 mm nominal bore. |
| 36 | Providing and fixing PTMT ball cock of approved quality, colour and make complete withEpoxy coated aluminium rod with L.P. / H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. |
| 37 | Providing and fixing on wall face Un plasticized Rigid PVC rain water types confirming to IS :13592 Type A including jointing with seal ring confirming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socket pipes 75 mm diameter. |
| 38 | Providing and fixing Un plasticized PVC connection pipe with PTMP nuts collar and bush ofapproved quality and colour. 15 mm nominal bore with 30 cm length. |
| 39 | Providing & Fixing of Heavy duty capacitor start, copper wound Double ball bearing 900/1400 RPM single phase Exhaust fan conforming to IS:2312 ISI marked in existing opening includingmaking connections testing etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR300 mm sweep(900/1400 RPM) |
| 40 | P&F1.6mmthickM.S.Recessedfanbox,hexagonal/roundofsize100mmdiameter,depth 75 mm, 12 mm diameter road fan hook with 100 mm length extended on each side. |
| 41 | Providingandfixingflexible20mmdiameterPVCconduit2mmthickincludingallnecessary supports, clamps, jointingpieces etc for drop of wire / cable from slab / wall. |
| 42 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR VC insulated unsheathed flexible copper earth conductor 1.1 kVgrade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it\"s ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch, Modular face plate with gridplate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet\"s & Electrical/ Wiring accessories refer Chapter-53, 54 & 56 for additional technical parameters of product / work refer Annexure \"A\" attached with this BSR Short point (up to 3 mtr.) |
| 43 | Medium point (up to 6 mtr.) |
| 44 | Long point (up to 10 mtr..) |
| 45 | Wiringof3pin5amp.lightplugpointwith1.5sq.mm.FRPVCinsulatedunsheathed flexiblecopperconductor1.1KVgradeand1.5sq.mmFRPVCinsulatedunsheathed flexiblecopperearthconductor1.1KVgrade(IS:694)ofapprovedmakeinsurface/ recessed ISI marked mediumduty PVC conduit & it’s accessories, 18 SWG M.S. box with earthterminal,screwlesscageconnectorsforneutralloopinginswitchboard&false ceiling point, 6 A switch, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated /brass screws, cup washers, making connections, testing etc. as required.On Board Gr. - I. |
| 46 | P&Fdoubleballbearingcapacitorstartceilingfanofapprovedmakecompletewith regulatorandotheraccessoriesasrequired. 1400 mm sweep |
| 47 | P & F of IP65 IK10 rated LED bulk head type light fixture made from CRCA sheet steel housing suitable for mounting LED tube system (integral driver), Power consumption of 10-15W , 500-600 lumens system lumen efficiency 70 lm/ watt output suitable for1x100 W GLS/9W CFL bulk head fixtures, life time of 50000 burning hours with 70% initial lumen maintained. CCT 3000° K,4000° K and 6000° K. Fixture shall be incompliance with CE & KEMA standards. LED Bulk head luminaire 6/7W |
| 48 | SITC of quick make and quick break 3 POLE current limiting MCCB having following current rating,shortcircuitbreakingcapacityat440/415V,50Hz;O/L&S/Csettingsand conformingtoIS13947-2/IEC60947-2withfrontfaceandcentralizedadjustable,line loadinterchangeability,havingpositiveisolationcapacity,provisionforUVR, shunttrip, earth fault trip, push (test) to trip, including making connections with lugs / spreaders etc asrequiredwithThermalMagneticreleaseupto100Amp,10kA,fixedO/LandS/Csetting. |
| 49 | Providing & Fixing of Heavy duty capacitor start, copper woundDouble ball bearing 900/1400 RPM single phase Exhaust fanconforming to IS:2312 ISI marked in existing opening includingmaking connections testing etc. as required. All as per pre approvedby Engineer in-charge. For additional technical parameters ofproducts/ work , refer Annexure \"A\" attached with this BSR .300 mm sweep(900/1400 RPM) |
| 50 | P & F Fluorescent tube rod in existing fixtures as required 36/40 Watts. |
| 51 | P&Ffollowingmodularaccessoriesmadeoutofunbreakableandfireretardantpolycarbonate with silver contacts including making connections testing etc. as required. 5 step fan regulator |
| 52 | Makingsoakpit2.5mdiameter3.0metredeep with45x45cmdrybrickhoneycomb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m longcomplete as per standard design.With bricks |
