Tender For Construction Of Unisex Accessible Toilets For Divyangjan Under Swacch Bharat Mission At 4-H Food Court Gate No-I At Nit Hamirpur.; 1 Earth work (All kinds of soil) in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. including entire carriage of materials upto all leads, lifts and cost of other incidentals. 2 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including entire carriage of materials upto all leads, lifts and cost of other incidentals. 3 Centering and shuttering including strutting, propping etc. and removal of form for all heights including entire carriage of materials upto all leads, lifts and cost of other incidentals. 4 Foundations, footings, bases of columns, etc. for mass concrete. 5 Suspended floors, roofs, landings, balconies and access platform. 6 Lintels, beams, plinth beams, girders, bressumers and cantilevers. 7 Columns, Pillars, Piers, Abutments, Posts and Struts. 8 Edges of slabs and breaks in floors and walls Under 20 cm wide. 9 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth leve.l (cement Brand:-Ultratech/ACC/ Ambuja/ Banger cement. including entire carriage of materials upto all leads, lifts and cost of other incidentals. 10 1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40 mm nominal size) 11 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. (cement Brand:-Ultratech/ACC/ Ambuja/ Banger cement. including entire carriage of materials upto all leads, lifts and cost of other incidentals. 12 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 13 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement. (cement Brand:-Ultratech/ACC/ Ambuja/ Banger cement.including entire carriage of materials upto all leads, lifts and cost of other incidentals. 14 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 15 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (cement Brand:-Ultratech/ACC/ Ambuja/ Banger cement.including entire carriage of materials upto all leads, lifts and cost of other incidentals.. 16 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level,Thermo-Mechanically Treated bars of grade Fe-500D or more . Make:-Tata /Jindal /Sail.including entire carriage of materials upto all leads, lifts and cost of other incidentals. 17 Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand)including entire carriage of materials upto all leads, lifts and cost of other incidentals. 18 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4coarse sand)including entire carriage of materials upto all leads, lifts and cost of other incidentals. 19 Cement mortar 1:4 (1 cement : 4coarse sand) 20 Providing and fixing aluminium Sliding door bolt ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. completeincluding entire carriage of materials upto all leads, lifts and cost of other incidentals. 21 300x16mm 22 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. completeincluding entire carriage of materials upto all leads, lifts and cost of other incidentals. 23 125mm 24 75mm 25 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. completeincluding entire carriage of materials upto all leads, lifts and cost of other incidentals. 26 250x10 mm 27 100x10 mm 28 Providing and fixing bright finished brass hard drawn hooks and eyes :150mmincluding entire carriage of materials upto all leads, lifts and cost of other incidentals. 29 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge,with stainless steel cover plate minimum 1.25 mm thicknessincluding entire carriage of materials upto all leads, lifts and cost of other incidentals. 30 Providing and fixing 4mm thick bakalight tile/sheet in aluminium shutter with aluminium beading and rubber/gasket complete as per direction of Engineer - In - Charge including entire carriage of materials upto all leads, lifts and cost of other incidentals. 31 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc.,Make:-Somani/Kajaria/AGL completeincluding entire carriage of materials upto all leads, lifts and cost of other incidentals. 32 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Make:-Somani/Kajaria/AGLincluding entire carriage of materials upto all leads, lifts and cost of other incidentals. 33 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand)including entire carriage of materials upto all leads, lifts and cost of other incidentals. 34 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer. Make :- Asian/Nerolac/Dulux /Berger. including entire carriage of materials upto all leads, lifts and cost of other incidentals. 35 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) Make :- Asian/Nerolac/Dulux /Bergerincluding entire carriage of materials upto all leads, lifts and cost of other incidentals. 36 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)including entire carriage of materials upto all leads, lifts and cost of other incidentals. 37 For fixed portion:Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868,Minimum anodic coating of grade AC 15) 38 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) :Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868,Minimum anodic coating of grade AC 15) 39 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)including entire carriage of materials upto all leads, lifts and cost of other incidentals. 40 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smoothincluding entire carriage of materials upto all leads, lifts and cost of other incidentals. 41 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid. Make:- Parryware/Cera/ Hindware.including entire carriage of materials upto all leads, lifts and cost of other incidentals. 42 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap . Make :- Parryware/Cera/ Hindware. including entire carriage of materials upto all leads, lifts and cost of other incidentals. 43 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers completeincluding entire carriage of materials upto all leads, lifts and cost of other incidentals. 44 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete, Semi rigid pipe and 32 mm diaincluding entire carriage of materials upto all leads, lifts and cost of other incidentals. 45 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms including entire carriage of materials upto all leads, lifts and cost of other incidentals.. 46 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colourincluding entire carriage of materials upto all leads, lifts and cost of other incidentals. 47 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gmsincluding entire carriage of materials upto all leads, lifts and cost of other incidentals. 48 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :Make:- Parryware/Cera/ Hindware. including entire carriage of materials upto all leads, lifts and cost of other incidentals. 49 15 mm nominal bore 50 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats completeincluding entire carriage of materials upto all leads, lifts and cost of other incidentals. 51 20 mm nominal bore 52 Providing and fixing CP brass angle stop cock 15 mm nominal bore, weighing not less than 85 gms Make:- Parryware/Cera/ Hindware.including entire carriage of materials upto all leads, lifts and cost of other incidentals. 53 Providing and fixing uplasticised PVC connection pipe with brassunions including entire carriage of materials upto all leads, lifts and cost of other incidentals. 54 15 mm nominal bore with 45 cm length 55 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube uptoincluding entire carriage of materials upto all leads, lifts and cost of other incidentals. 1 metre long with S.S. triangular plate to Eureopean type W 56 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe withclamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wallMake:- Vectus/ Unik/ Finolex/ .including entire carriage of materials upto all leads, lifts and cost of other incidentals. 57 20 mm nominal dia Pipes 58 P/F CPVC FTA/MTA 20mm including entire carriage of materials upto all leads, lifts and cost of other incidentals. 59 P/F CPVC Brass Tea 20mm including entire carriage of materials upto all leads, lifts and cost of other incidentals. 60 P/F CPVC Brass Elbow20mm including including entire carriage of materials upto all leads, lifts and cost of other incidentals. 61 P/F UPVC Floor trap including entire carriage of materials upto all leads, lifts and cost of other incidentals. 62 75 mm diameter 63 Providing and fixing PTMT grating of approved quality and colour including entire carriage of materials upto all leads, lifts and cost of other incidentals. 64 125 mm nominal dia 65 Providing and fixing on wall face unplasticised Rigid PVCpipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion(i) Single socketed pipes.Make:- Vectus/Deplast/ . including entire carriage of materials upto all leads, lifts and cost of other incidentals. 66 75 mm diameter 67 110 mm diameter 68 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5°Make:- Vectus/Deplast/ . including entire carriage of materials upto all leads, lifts and cost of other incidentals. 69 75 mm diameter 70 110 mm diameter 71 P/F Hand Grip 600mm Grab Bars including entire carriage of materials upto all leads, lifts and cost of other incidentals. 72 P/F Hand Grip 450mm Grab Bars including entire carriage of materials upto all leads, lifts and cost of other incidentals. 73 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including entire carriage of materials upto all leads, lifts and cost of other incidentals. 74 Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.including entire carriage of materials upto all leads, lifts and cost of other incidentals. 75 With granite stone of area less than 0.50 sqm. 76 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank .Make:- Sintex/Vectus/Deplast/ . including entire carriage of materials upto all leads, lifts and cost of other incidentals.
