Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 24-11-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-11-2025 |
| Sl. No. | Item Description |
| 1 | INTERNAL RENOVATION WORKS OF FLATS AND COMPLETE RENOVATION AT NARARD STAFF QUARTERS. DAMODAR PARK.GHATKOPAR(W), MUMBAI. Enabling System:-DOUBLE SCAFFOLDING SYSTEM(cup lock type)Providing and fixing double scaffolding system (cup lock type) on the exterior side of G + 13 storeyed building/structure for all heights above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform,net for capturing falling debris, hessian fabric cloth ( having opaqueness > 90 % ) for safety etc. and maintaining it in a serviceable condition duringexecution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval ofconsultant. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once (one time) only for execution of all the items of works requiring scaffolidng (3) No extra/additional payment shall be made for removal and refixing of scaffolding, if done by the contractor for any reason/s. (4) Entire scaffolding material used shall be the property of the contractor and shall be removed and taken away by the contractor after completion of work. (5) Any damages to the wall and other parts of the building caused due to the fixing and removing of scaffolding shall be repaired by the contractor on his own cost. |
| 2 | WINDOW COVERING :a) Providing and fixing 6 mm thick old/ new commercial plywood in servicable condition with jungle wood frame work of 50 x 35 mm size at 60 cm on One ways for closing the window portion/openings for protection from falling debris, dust etc. including cutting, fixing with nails and removing after the same after completion of the work. (In event of any damage to existing windows, shall be the same shall be repaired by the contractor on his own cost) |
| 3 | BREAKING OF EXTERNAL / INTERNAL PLASTER: USING Chisel & HammersDismantling/ Removal of the existing old plaster (both internal and external) of any thickness and at all levels by chisel & hammer / cutter plate or skirting including raking out joints and cleaning the surface for re-plaster. Rates quoted to include removing all debris, spalls, including cleaning the site, lowering down the debris to the ground without causing dust nuisance and damage to the structure and disposing & carting away the debris outside the building compound upto the municipal dump site with necessary municipal permision with all lead and lift. |
| 4 | DEMOLISHING BRICK WORK : Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material outside the building compound to the municipal dump grounds with required municipal permission for all lead and lifts as per direction ofconsultant. |
| 5 | DISMANTLING OF TERRACE WATERPROOFING: Removing the existing waterproofing layers of china mosaic flooring and bedding brick bat coba of any thickness on theexisting terraceincluding cement vatta ( wherever required) and exposing the RCC slab surface and cleaning it. Rates shall be quoted to include removing all debris, spalls, including cleaning the site, lowering down the debris to the ground floor without causingdust nuisance and damage to the structure and disposing & carting away the debris outside the building compound upto the municipal dump with required municipal permision with all lead and lift, etc. complete as directed. |
| 6 | M.S. STEEL PROPS:-Providing and fixing in vertical position telescopic M.S.prop under deflected beam/lintel/slab/chajjas by using wooden battens of size 1000 x 80 x 80 for packing between prop plate and the beam/lintel/slab/chajjas bottom surface to support the structure member beneath provisionally during strucutural repair and jacketting of that member etc. and maintaining them in the position till required time at the required locations as per the directions ofconsultant. Note: The work shall be executed only with the prior approval of theconsultant. |
| 7 | REMOVING THE EXISTING Mild Steel(MS) GRILL: (LIVING ROOM , BEDROOM & KITCHENWINDOWS) ( UPTO SIZE 3 X 1.50M) Dismantling the existing M.S.Grills made up of angles, tees, flats, channels, etc. including all gusset plates, bolts, nuts, cutting rivets, welding, etc. carefully including dismembering complete work as directed for, at all locations in the building and taking away the same and providing buy back for the items mentioned later in the BoQ |
| 8 | REMOVING THE EXISTING MS GRILL: (WC & BATH WINDOWS) (SIZE 0.90 X 0.60 M) Dismantling the existing M.S.Grills made up of angles, tees, flats, channels, etc. including all gusset plates, bolts, nuts, cutting rivets, welding, etc. carefully including dismembering complete work as directed for, at all locations in the building and taking away the same and providing buy back for the items mentioned later in the BoQ. |
| 9 | TEMPORARY PROTECTION TO FLOORING : Providing temporary protection to flooring using PVC sheet & plaster of paris, wherever required as per the directions ofconsultant. This protection is to be retained till completion of works in the areas and handing over of the area to the bank so as to prevent damage to the flooring during execution of works inside the flats and removing the same after completion of work and carting away the debris outside the building compound up to the municipal dump with required municipal permission with all lead and lifts, etc. complete |
| 10 | Removing/Taking out doors, windows and clerestory window shutters (steel or wood) of area 3 Sq. Meters and below including its frames, architraves, holdfast, jambs, etc. at all locations and stacking the dismantled materials within the building compound at designated location including all leads & lifts, etc. complete as instructed and directed |
| 11 | Removing and dismantling steel work having built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc.at all locations including dismembering and stacking the dismantled materials within the building compound at designated location including all leads & lifts, etc. complete as instructed and directed |
| 12 | Dismantling roofing material including ridges, hips, valleys and gutters etc., made of Acrylic/G.I/ Galvalume Sheet at all locations and stacking the dismantled materials within the building compound at designated location including all leads & lifts, etc. complete as instructed and directed (Plan Area will be the basis for payment) |
| 13 | Removing existingweather shedscarefully at all locations and heights on exterior face of the building and stacking the same within the building compound at designated location for re-fixing purpose including all leads & lifts, etc. complete as instructed and directed. STAIRCASE & PASSAGE (SIZE 2.35 m x 0.60 m) |
| 14 | Removing existingweather shedscarefully at all locations and heights on exterior face of the building andstacking the same within the building compound at designated location for re-fixing purpose including all leads & lifts, etc. complete as instructed and directed.(WC & BATH(SIZE 2.35 m x 0.60 m) |
| 15 | Re-fixing the removed weather sheds at all locations and heights on exterior face of the building with new anchor fasteners required for fixing in its original position including all additional material required for repair /servicing of the old chajja for alllead & lifts, etc. complete for installation of the weather sheds.STAIRCASE & PASSAGE (SIZE 2.35 m x 0.60 m) |
| 16 | Re-fixing the removed weather sheds at all locations and heights on exterior face of the building with new anchor fasteners required for fixing in its original position including all additional material required for repair /servicing of the old chajja for alllead & lifts, etc. complete for installation of the weather sheds.(WC & BATH(SIZE 2.35 m x 0.60 m) |
| 17 | Dismantling the old/existing tile work of any thickness in floors, walls and roofs including the bedding cement mortar or tile adhesive and removing all debris, spalls, including cleaning the site, lowering down the debris to the ground floor without causingdust nuisance and damage to the structure and carting away the debris outside the building compound upto the municipal dump with required municipal permision with all lead and lift, etc. complete as directed. |
| 18 | STRUCTURALREPAIR CHIPPING OF R.C.C.:-Chipping and removing theloose/ unsound/ weak concrete with manual chisel and/ or by standrad power driven percussion type of approved make equipment upto reinforcing bars, without removing the reinforcement, including tapering of all edges, making square shoulders of cavities, removing all the loose materials, cleaning the surface by water jet pressure pump to make all the exposed surface free from dust, oil and all impurities, etc. and air drying the surface, etc. complete as directed for all locations. (Note:-Exposed Surface area prepared for repair of structural member shall be considered for payment) |
| 19 | Providing & applying anti corrosive treatment with zinc rich epoxy primer to the exposed reinforcement after removal of the corrosion in steel reinforcement by mechanical means like wire brushing, chipping to remove loose rust and then applying alkaline chemical rust removal solution of approved make with brush and leaving the surface for at least 24 hours, then removing loose materials by scrubbing or with brush and thoroughly washing with water and allowing it to surface dry. After detachment of loose scales reddish rusted surface is still left exposed, this has to be retreated or as per approved manufacturers specifications.(Note:-Exposed Surface area prepared for repair of structural member shall be considered for payment) |
| 20 | Application of Corrosion Inhibitor: Providing & applying One coat of Concrete Penetrating Corrosion Inhibitor (Surface applied) which works on Bipolar Inhibition Mechanism on entire concrete surface to be repaired by using brush or spray at 250 ml per Sq.Mt./Coat or as per manufacturer’s specification and prior to application of first coat of anti corrosive coating to reinforcement. (Note:-Exposed Surface area prepared for repair of structural member shall be considered for payment) |
| 21 | Bond Coat: Providing & applying One coat of structural grade epoxy bond coat of approved make and brand by brush conforming to ASTM-881- 87 to the prepared concrete surface to be repaired / strengthened at the rate of 2.20 sq.m./ kg. This is applied prior to the application of polymer repair mortar / epoxy mortar / Microconcrete to have monolithic action between old concrete surface and new concrete surface at all locations as directed. (Note:-Exposed Surface area prepared for repair of structural member shall be considered for payment) |
| 22 | Polymer Modified Mortar (PMM) REPAIRS: Repairingthe damaged existing RCC structural members (vertical or horizontal) by supplying & applyingready mix Polymer Modified Mortar of approved brand conforming to EN 1504 Part 3 (Properties: 28 days compressive strength ≥ 45 MPa and Bond Strength ≥ 2 MPa), where the thickness of repair is upto 30 mm in two layers, to the prepared concrete surface to be repaired / strengthened and repairing with PMM shall be done when the epoxy bonding coat is tacky. In one application around 15 mm thickness shall be built.Subsequent layer shall be built by supplying & applyingone bond coat of Polymer modified cement slurry . The quoted rate shall include all these operations. (However, it is clarified thatbond coatbetween old & new surface of concrete, shall be applied & paid separately). PMM applied surface to be smoothed with a trowel or finishing by float or sponge to be done as soon as the mortar has begun to stiffen. The polymer modified repair mortar shall be mixed, applied and cured as per the manufacturer\"s technical specifications completeas directed. The final coating of protective layer of prescribed chemical (Like Duck Gaurd of M/s Fosroc) is to be applied within quoted rate. (Note:-Exposed Surface area prepared for repair of structural member shall be considered for payment) |
| 23 | MICRO CONCRETE WORK: Repairing the existing damaged RCC structural members (vertical or horizontal) or strengthening itby supplying & applyingready mix Micro Concrete of approved brand & make conforming to EN1504 Part 3 (Properties: 28 days compressive strength≥ 55 MPa and Bond Shear Strength ≥ 10 MPa at 14 days), where the thickness of repair is more than 30 mm and upto 115 mmwhen the epoxy bond coat is tacky, including supplying & applyingbond coat, cost of fixing and removal of good quality shuttering or forms treated with a chemical release agent and braced to withstand the pouring pressure, pouring the microconcrete in forms at all levels & heights, proping, finishing the surface, curing, etc. complete as directed. The quoted rate shall include cost ofall these necessary operations relating to extensive repairs to beams,columns and other structural members. For repairs beyond 80mm to 115mm in thickness, extend Ready Mix Micro Concrete with up to 25kg of 5-12mm sized washed, saturated surface-dry (SSD), graded low absorption, high density aggregates. The microconcrete shall be mixed, applied and cured as per the manufacturer\"s technical specifications. The final coating of protective layer of prescribed chemical (Like Duck Gaurd of M/s Fosroc) is to be applied within quoted rate. (Note: Payment is to be made by weight premixed of micro concrete product consumed as per site register records) |
| 24 | Concrete of M25 grade with minimum cement content of 340 kg /cumProviding and laying in position ready mixed or site batched design mix cement concrete of M25 grade with minimum cement content of 340 kg/ cum for reinforced cement concrete work at all heights and location; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads & lifts , centering, shuttering etc. but excluding the cost of reinforcement as per direction of theconsultant |
| 25 | Providing and laying M25 concrete for jacketting the existing column of any size as per site condition by removing the concrete cover to reinforcement, by chipping or other suitable means to expose the reinforcement of existing column in order to make available the same for binding the extra reinforcement as shown in the drawing and also supplying & applying approved rust removal & removing loose scales of the reinforcement as well as providing & applyingapproved make of epoxy resin to get proper bond with newly laid M25 grade concrete. This item includes requisite shuttering, centring, scaffolding, proping etc. for repairing the existing surface as specified and also removal of debris, curing etc. complete at all locations as per the specifications and directions of theconsultant.The aforesaid concrete shall be laid by the sides of the existing column with uniform thickness of 115 mm or as specified, for jacketing purposes thereby increasing the sectional dimensions by 150 mm or as specified including surface finish at any height . (NOTE :- Reinforcement will be paid separately under respective item of schedule ). |
| 26 | Providing and fixing in position Thermo Mechanically Treated steel bars reinforcement of Grade Fe500D conforming to IS 1786 of various diameters for R.C.C. pile, pile caps, footings,raft,retaining wall,shear wall, lift wall, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches, etc. at all levels and position as per detailed designs, drawings and bar bending schedules approved by EIC, including straightening, cutting, bending, hooking the bars, binding with wires or tack welding, supporting provision with necesary chairs and spacers as required etc. all complete at all locations as directed. (Note: The chairs, spacers, unauthorised laps, binding wire and wastages shall be to contractor\"s account and will not be measured for payment, only used TMT bars weight will be considered) |
| 27 | Doing drilling to make required diameterhole & cleaning it as well as supplyingandinjectingETA approved fast curing epoxy resin anchor grout in RCC beams, lintels, columns and slabs to introduce reinforcement steel bars of diameters upto 16mm at required locations including fixing in position the steel bars but excluding the cost of reinforcement bars. Application to be designed separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR 023 or relevant tested and accepted rebar guidelines. The chemicalshouldhaveETA approvalforseismicrebarasaminimumqualifyingcriterion. Drillingholewithdoubleflutetypedrillbitsorhollowdrillbitstotherequireddepthby rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener using serratednozzletoeliminatemixingerrorwithstandardHDEA22batterydispenseralong with piston plug. The installation and the setting instructions should be strictly followedas per the manufacturer’s recommendations. The adequate diameter and embedment of rebars to bedecidedasperPROFISRebarSoftware&thereporttobesubmittedtotheproject manager/ design engineer for approval. Scanning before drilling to be done to avoid hitting existing rebars. |
| 28 | SHEAR CONNECTORS: Providing and fixing shear connectors by making 10/12 mm dia holes using heavy duty electrically operated hammer drills in the concrete of RCC members to a depth of about 75 mm at 500 mm c/c or at suitable grid in zig-zag fashion, clean the holes using air jet and fix pre- fabricated 100 x 50 mm L-shape 8 mm dia rebar using Anti Corrosive protective coating so that 75 mm out of 100 mm is inserted inside the concrete and 25 mm remain outside along with 50 mm bend and grouting the holes by supplying & applying the required epoxy grout. The shear connectors are used to tie the additional reinforcement bars at all locations. |
| 29 | Carbon Laminate Strips: Providing and fixing of 100 mm x 1.4 mm carbon fiber reinforced polymer laminate having fiber volume content more than 68% and mean laminate tensile strength of 3100 MPa with epoxy resin based adhesive in the beams, columns, structural elements as per the directions of the Consultant / NABARD, including cleaning and preparation of the substrate concrete surface, all manpower and equipments, etc. complete in all respect |
| 30 | GROUTING NIPPLE: Providing and inserting 12 mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diameter (20 mm to 30 mm) up to depth from 30 mm to 80 mm at required spacing and making the hole & cracks dust free by blowing compressed air, sealing the distance between injection nipple by providing & applying the required adhesive chemical of approved make and allow it to cure complete as per direction of EngineerIn-Charge at all locations. Rates to include the cost of scaffolding, all material and equipment, lead & lifts etc. complete in all respects. |
| 31 | Polymer Cement Grouting: Providing and injecting Polymer Cement Grout (10% of Polymer of approved makes by Weight of Cement) through pre-fixed nozzled into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required high pressure including scaffolding/ working platform, cutting of nipples after curing, cleaning, etc. complete as per directions ofconsultant at all locations (Note: This item shall be paid on actual consumption of grout used in Kg as per site register book) |
| 32 | Carbon fibre wraping system: Strengthening the structural elements by providing & fixing CARBON FIBRE of 430 GSM (Make Sika or BASF or FOSROC or equivalent) including surface preparation by grinding concrete substrate, cleaning it with wire brush removing oil, laitance if present, rounding sharp edges to min 25 mm radius etc. complete, profiling by providing & applying primer of approved makes as per manufacturer\"s specifications on prepared substrate, filling the holes and uneven surface with high strength epoxy putty, also providing & applying first coat of Saturant, cutting the carbon fiber sheet to size, wrapping the fiber sheet to structural element at desired orientation using tamping roller to avoid any air voids, repeat the same procedure for multiple layer with interval of 8 hours, aplpying saturant to rectify air voids if any, paste the river sand on it to make surface rough to take any further finishes. Rates to includes all type of material, application, equipment & scaffolding, etc.complete and shall be applicable for all height & level. (Note: Mode of measurement shall be Per Sq.Mt of Fiber consumed- including wastage and not the surface area of application ) |
| 33 | Providing and laying cement concrete of grade with nominal mix of 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) in any thickness for retaining walls, return walls, walls including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, kitchen counter, window chajjas , sunken floor etc. at all depths and heights/ levels including pumping of concrete to site of laying if required, curing, carriage for all leads, centering, shuttering etc. complete as per specifications and direction of theconsultant. |
| 34 | Epoxy Grouting: Providing and injecting low viscosity epoxy grout of approved makes inproportion recommended by the manufacturer into through pre-fixed nozzles into the cracks/honey-comb area of concrete/masonry by suitable gun/pump at required high pressure including scaffolding/ working platform, cutting of nipples after curing, cleaning, etc. complete as per directions ofconsultant at all locations . (Note: This item shall be paid on actual consumption of grout used in Kg as per site register book) |
| 35 | PLASTERING WORKS:-Plaster of External Facades, plumbing duct areas and Terrace area (Entireexternal area ) Providing and applying external sand faced cement plaster at all positions and levels with cement mortar ( 1 cement :4 fine screened sand ) in two coats for masonry and concrete surfacesincluding surface preparation, raking out joints, hacking concrete surface, base coat of 15mm thick in C.M. 1:4 added with approved water proofing admixture conforming to IS 2645 and 6mm long polypropylene fibers conforming to ASTM C 1116 Type III in proportions recommended by the manufacturer specifications and curing the same for not less than three days and keeping the surface of base coat rough to receive the sand face treatment 6 to 8 mm thick of C. M 1:3 finishing the surface by taking out grains and curing for 7- 10 days, providing bands, drip moulds, grooves, finishing corners, etc complete as per instructions and directions of theconsultant. |
| 36 | Providing and fixing chicken wire mesh of 22 gauge of 30 cm width at the junction of RCC members and brick work of approved quality, prior to plastering, including fixing mesh in necessary position at all positions by necessary drilling/ nailing in concrete/ masonry, etc. complete as specified and directed by theconsultant at all locations. |
| 37 | PLASTER DASH COAT ONEXTENSIVELYDAMAGED WALLSProviding and applying one layer (avg. thickness of 15mm) of Ready mix Cement plaster dash coat on extensively damaged wall surfaces,impregnatingbrickbat pieces in the plasterand bringing the damagesurface in line & level with original wall surface & making the surface rough prior to carrying out external plastering work all complete as per the instruction & satisfaction Consultant / NABARD at all location. |
| 38 | SEPERATION CRACK TREATMENT: Providing and applying crystalline mortar by mixing in the ratio of 4.5:1 (4.5 parts crystalline mortar: 1 part water) for the treatment of cracks on the surface of walls, ceilings, junction of RCC and masonry, etc. by opening the cracks for a size of 50 mm wide and 75 mm deep from either side of the cracks using cutter machine or chiseling with a well sharpened chisel and hammer cutting to form a V groove all along the length of the crack, cleaning the groove with wire brush, surface preparation by washing with water jet, priming the grooved area with integral crystalline slurry at 0.05 Kg/ running meter and e and while the surface is tacky, fill the groove upto existing plaster surface with crystalline mortar @1.50 kg/running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05 kg/running metre per coat and making the surface similar to the adjacent plastered surface using wooden floats/ punch, etc. complete as specified and directed by theconsultant. |
| 39 | Providing and laying Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5in Cement mortar 1:4 (1 cement : 4 coarse sand) in all types of foundation and superstructure for any depths at all locations and heights with RCC band at sill and lintel levels including providing openings, projections, pillars, parapets, ornamentals of any shape, cornice, etc., raking out joints, curing, etc. complete as per the directions of theconsultant (The payment for RCC band and reinforcemnet shall be made seperately under relevant items) |
| 40 | Providing and applying 15 mm cement plaster 1:4 (1 cement: 4 fine screened sand) finished with a floating coat of neat cement at all heights and locations for masonry and concrete surfaces including racking out joints, hacking of concrete surface, watering, finishing, curing, etc. complete as specified and directed by theconsultant |
| 41 | STRUCTURAL STEEL:- Providing, detailing, fabricating and fixing of steel structures such as roof girder/ truss, struts, roof purlins, sag angles/ rods, ladders, etc. using hot rolled sections and MS plates of grade Fe 250 at desired location/s as per specifications and approved fabrication drawings for all heights and levels including surface preparation for painting by removing welding blurr with wire brush and grinding and providing & applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each & two coats of epoxy corrosion resistant enamel paint of 30 microns after fabrication including touching up with spray/brush painting. Painting coats shall be applied one before erection and one coat after erection. Rates to include provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary fixtures, loading, transportation and unloading at erection site, storage and handling at site, site assembly and finally erection of structures at appropriate location, alignment and welding of all structures true to line, level, plumb and dimension. |
| 42 | Waterproofing Work:-Ponding the entire terrace with water for seven days by making watta. |
| 43 | Terrace Waterproofing: Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc by includingfollowing operations:(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved byconsultant over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved byconsultant over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved byconsultant to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved byconsultant.(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved byconsultant including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with broken china mosaic flooring. The quoted rate shall include the cost of the all the above operations and shall be carried out at all locations with lead & lifts etc. including diposal of debris from the building compound to designated municipal dumping grounds complete as directed. |
| 44 | Providing and applying of PU based roof waterproof topcoat system of approved brands and make having VOC < 2.5%, tear resistance > 15 MPa ( how to assess it ? ) and crack bridging ability of minimum 2mm over terrace areas and parapet wall including removal of existing water proofing coats by mechanical methods like grinding to enhance the adhesion and bonding of the china mosaic surface, necessary cleaning with wire brush followed by high-pressure water jet cleaning for surface preparation and including one self -priming coat ( of what ?? ) at 10 sq.m./ l, 2 coats at 2 sq.m/ l/ coat at 90 degrees to each other, etc. all completeas per the manufacturer’s specification as specified and at all locations as directed. |
| 45 | Carrying out waterproofing treatment to the chajja after carefully chiseling/ chipping out existing cracked /damaged IPS/ old plaster by preparing surface through roughening and finishing the top surface by providing & doing around 20 mm thick 1:2 Cement Sand Plaster ( 1 cement :2 screened sand) with waterproofing compound as per manufacturer specifications includingneat cement finish and drip moulding at edge & bottom of chajja and cement vatta above chajja along the junction with the wall, etc. complete as specified and at all locations as directed regarding disposal of debris etc. |
| 46 | Providing and applying two coats ( each 200 micons dryfilm thickness having either ivory or gray in colour shade ) of non toxic, High build,, Solvent free, Taint free potable food grade epoxy coating of approved brand having bond strength of minimum 1.5 Mpa as per ASTM -D 4541 on any type of RCC surface of the reservoir/ water tank internally including scaffolding and preparation of the surface free from oil, grease, laitance or loose particles by any means, primer coating, equipments and materials, etc. all complete as per the manufacturer\"s specifications as specified and directed by Engineer - in - charge. The food grade epoxy coating product must have prior certification for potability test issued from Central Food Technological ResearchInstitute (CFTRI, Mysore, Karnataka). Certificate from the manufacturer about satisfactory completion of the above work as per above mentioned specifications shall be submitted. |
| 47 | PLUMBING WORK :-Providing and erecting Temporary Plumbing lines withPVC Pipes and fittings (1’6’’ /2’0’’ away from the external walls or as directed by the Consultants) to facilitate the Repair works in Toilet ducts and dismantling the same after the completion of 2nd coat of External plaster etc complete as instructed and directed. |
| 48 | Providing and erecting Temporary water pipes of 50mm diaUPVC Pipes and fittings as directed by the Consultants to facilitate the GI looping works and dismantling the same after the completion as instructed and directed. |
| 49 | PROVIDING AND FIXING CPVC PIPES:- a) 50MM MAIN SUPPLY LINE CPVC: Providing and fixing in position Chlorinated Polyvinyl Chloride (CPVC) pipes of 50 mm nominal bore of approved make at all heights/ levels, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, jointing of pipes & fittings with one step CPVC solvent cement, fixing the pipes with clamps at 1 m spacing as well as at bends/branches & testing of joints complete as per direction of Consultant / NABARD.( For payment the finished length of pipes will be measured at the site) |
| 50 | b) 32MM MAIN SUPPLY LINE CPVC: Providing and fixing in position Chlorinated Polyvinyl Chloride (CPVC) pipes of 32 mm nominal bore of approved make at all heights/ levels, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, jointing of pipes & fittings with one step CPVC solvent cement, fixing the pipes with clamps at 1 m spacing as well as at bends/branches & testing of joints complete as per direction of Consultant / NABARD. ( For payment the finished length of pipes will be measured at the site) |
| 51 | c) 25MM DOWN TAKE LINE CPVC: Providing and fixing in position Chlorinated Polyvinyl Chloride (CPVC) pipes of 25 mm nominal bore of approved make at all heights/ levels, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, jointing of pipes & fittings with one step CPVC solvent cement, fixing the pipes with clamps at 1 m spacing as well as at bends/branches & testing of joints complete as per direction of Consultant / NABARD. ( For payment the finished length of pipes will be measured at the site) |
| 52 | d) 15MM DOWN TAKE LINE CPVC: Providing and fixing in position Chlorinated Polyvinyl Chloride (CPVC) pipes of 15 mm nominal bore of approved make at all heights/ levels, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, jointing of pipes & fittings with one step CPVC solvent cement, fixing the pipes with clamps at 1 m spacing as well as at bends/branches & testing of joints complete as per direction of Consultant / NABARD. ( For payment the finished length of pipes will be measured at the site) |
| 53 | e) 65MM MAIN SUPPLY LINE CPVC: Providing and fixing in position Chlorinated Polyvinyl Chloride (CPVC) pipes of 65 mm nominal bore of approved make at all heights/ levels, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, jointing of pipes & fittings with one step CPVC solvent cement, fixing the pipes with clamps at 1 m spacing & testing of joints complete as per direction of Consultant / NABARD. |
| 54 | PROVIDING AND FIXING PVC PLUMBING LINES : (SOIL, WASTE & RAIN WATER PIPES):- a) 100MM RAIN WATER LINE PVCProviding and fixing in position 100 mm dia. UV resistant selffit uPVC/SWR (Soil/Waste/Rain) pipe of approved make conforming to IS 13592 of type-A suitable for 4 kg/ sq.cm pressure at all heights/ levels, including all fittings and accessories like offset, bends, shoe, etc., rain water receiving recess with PVC plug bend, making joints / connections water tight with solvent cement, fixing on floor or vertically against walls using MS brackets or clamps so as to keep the pipes away from the walls/ floors, water testing after laying of pipes and painting with two coats of paint of wall colour over a coat of primer of approved brand, scaffolding if necessary and making good the damages if any etc. complete as specified and directed.(All fittings and accessories like clamps,etc. should be of same brand. No separate payment shall be made for fittings and accessories. For payment the finished length of pipes will be measured at the site) |
| 55 | b) 100MM WC LINE PVCProviding and fixing in position 100 mm dia. uPVC/SWR (Soil/Waste/Rain) pipe of approved make conforming to IS 13592 of type-B at all heights/ levels, including all fittings and accessories like offset, bends, tees, etc., making joints / connections water tight with solvent cement, fixing on floor or vertically against walls using MS brackets or clamps so as to keep the pipes away from the walls/ floors, water testing after laying of pipes and painting with two coats of paint of wall colour over a coat of primer of approved brand, scaffolding if necessary and making good the damages if any (excluding excavation and refilling the trenches) etc. complete as specified and directed.(All fittings and accessories like clamps,etc. should be of same brand. No separate payment shall be made for fittings and accessories. For payment the finished length of pipes will be measured at the site). |
| 56 | c) 100MM WASTE LINE PVCProviding and fixing in position 100 mm dia. uPVC/SWR (Soil/Waste/Rain) pipe of approved make conforming to IS 13592 of type-A at all heights/ levels, including all fittings and accessories like offset, bends, tees, etc., making joints / connections water tight with solvent cement, fixing on floor or vertically against walls using MS brackets or clamps so as to keep the pipes away from the walls/ floors, water testing after laying of pipes and painting with two coats of paint of wall colour over a coat of primer of approved brand, scaffolding if necessary and making good the damages if any (excluding excavation and refilling the trenches) etc. complete as specified and directed.(All fittings and accessories like clamps,etc. should be of same brand. No separate payment shall be made for fittings and accessories). |
| 57 | 50MM AC PIPESMaking provision in wall to provide 50mm dia pipe for ACpiping in bedroom and hall complete. The item includes braeking the brick wall and fixing the unplasticised P.V.C.pipes of size 50mm of suitable length |
| 58 | WALL PIECE:-15MM REPLACEMENT OF G.I. LINE PASSING THROUGH WALL(CONNECTORS) Making hole in wall for removing Existing G.I. line (Avg. 0.45m long) in W.C, Bathroom and toilets of all diameter, Replacing the same with new UPVC pipes including fittings like ‘T’, Elbow, P.V.C. etc.,making good the hole with Cement mortar all complete to the Satisfaction of Consultant / NABARD. |
| 59 | WALL PIECE:-32MM REPLACEMENT OF G.I. LINE PASSING THROUGH WALL(CONNECTORS) Making hole in wall for removing Existing G.I. line (Avg. 0.45m long) in W.C, Bathroom and toilets of all diameter, Replacing the same with new UPVC pipes including fittings like ‘T’, Elbow, P.V.C. etc.,making good the hole with Cement mortar all complete to the Satisfaction of Consultant / NABARD. |
| 60 | BALL VALVES (FOR TERRACE /LOOP LINES) Removing the old Gate valves and Providing and fixing UPVC ISI approved Ball Valves of ASTRAL or approved equivalent make including carrying out necessary threading, fixing Teflon tapes etc complete at all levels/locations as instructed and directed.:- a) 25 mm nominal bore |
| 61 | b) 32 mm nominal bore |
| 62 | c) 50 mm nominal bore |
| 63 | PAINTINGWORK:-Elastomeric Exterior paint (The said Painting Works shall be executed with 5 years Service Guarantee andproduct warranty from the paint manufacturer) Scrapping the surface to remove all loosely adhered particles followed by washing with plenty of water using wire brush and jet pressure washer so as to ensure thorough cleaning. Scrapping the surface to remove all loosely adhered particles followed by washing with plenty of water using wire brush and jet pressure washer so as to ensure thorough cleaning. Providing and applying one coat of (Asian Paints Ultima Protek BaseCoat or equivalent) fibre reinforced liquid applied membrane having crack bridging ability up to 2.00 mm with topcoats without dilution . Also need to ensure forced coverage of 30-35 Sq.Ft/Ltr/Coat. Providing and applying twocoats of (Asian Paints Ultima Protek TopCoat) Organo-Silicon, UV Cross linking emulsion having (advanced anti algal) high resistance to growth of algae, (DPUR) Superior resistance to dust and dirt accumulation, (colour stay) resistance to fading of colours, protection against bird dropping and longevity ofwater Proofing and paint performance for 5 years so as to obtain an acceptable finish and ensuring coverage of 60 - 65 Sq.Ft/Ltr with 30-35% dilution with water. The work should be done by the manufacturer recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company representative. Note : Same scaffolding erected for civil works to be used for Ext painting works. |
| 64 | EXTERNAL TEXTURE PLASTER:Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface, scaffolding etc. complete. |
| 65 | Supplying and painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade by doing proper surface preparation with necessary tool, tackels , scaffolding etc. at all levels/locations complete as directed : two or more coats on old work |
| 66 | Scrapping the existing paint/ PoP/lime puning/ putty layer upto cement plastered surface from walls and ceiling area either manually with wire brush or blades or using mechanical devices and rubbing with sand paper at all locations and heights including scaffolding, tools, tackles, filling the cracks by supplying & applying premium acrylic crack filler putty of approved brand & make , even up the surface by any approved means, etc. complete as directed by theconsultant |
| 67 | Providing and doing painting with two or more coats of 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved make and colour at all locations and heights, including one coat of approved primer, scaffolding, cleaning, preparing the surface for painting by approved means, applying additional coats wherever required to achieve even shade and colour, etc. complete as directed by theconsultant. |
| 68 | WALL CARE PUTTY (IN FLATS , ST CASE AREA,COMMON PASSAGES )Providing and applying white cement based putty of approved brand and manufacture of average thickness of 2 mm or more in two coats, over the plastered surface or over the scrapped surface at all locations and heights, and preparing the surface even and smooth complete including scaffolding, cleaning and preparing surface for painting, etc. to the satisfaction of theconsultant. |
| 69 | INTERNAL PAINT (ST CASE AREA,COMMON PASSAGES:Providing and doing wall/celingpainting with two or more coats ofacrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved make and colour at all location and heights, including one coat of approved primer, scaffolding, cleaning applying additional coats wherever required, to achieve even shade and colour, etc. complete as directed by theconsultant |
| 70 | ROOFING WORK:- Providing corrugated 1 mm thick G.S. sheet roofing with zinc coating not less than 275 g/ sq. m. for vertical / curved and horizontal surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including overlaps, compatible flashing, trims, ridge panel, curved panel, fittings and fixtures, accessories, sealing tape and applying a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) as per the specifications, sheeting drawaings and directions of theconsultant. excluding the cost of purlins, rafters and trusses. Rates to include hooks, bolts, nuts, washers, fittings and accessories, loading, transportation and unloading at erection site, storage and handling at site, cutting and bending of sheets to required shapes and sizes and erecting them on roof and sides with necessary overlaps. (Note: Only plan area of the roof excluding the overlaps will be considered for payment) |
| 71 | STEEL WORK MS SAFETY GRILL:-Providing and Fixing MS Safety grill of required pattern as per design including fabricating the grill using M.S. square / round bar, flats and angles, fixing to the external face of the building with necessary hold fast or welding to the base plate fixed to the wall with anchor fasteners including painting with one coat of red oxide zinc chromate primer and two coats of synthetic enamel paint of approved colour and brand etc complete as directed by theconsultant. (Total weight of the grill shall include round/ square bars, flats and base plate for fixing into the walls excluding the weight of nuts, bolts and fasteners) |
| 72 | MS DOORS& ALUMINIUM WORKS:-Providing and fixing 1mm thick MS sheet door with frame 40x40x6mm angle iron & 3mm gusset plate at angles, corners with all necessary fittings including painting with one coat of red oxide zinc chromate primer and two coats of synthetic enamel paint of approved colour and brand, using MS angles 40x40x6 for diagonal bracing, etc. complete as directed by theconsultant |
| 73 | Providing & fixing in position aluminum louvered window with anodised aluminum frame of approved make & of size 40mm x 20mm x 2.0mm (wt. 0.605 kg/Rm) including adjustable aluminum frame, 4 to 6mm thk. frosted glass, fixtures & fastenings etc. complete as directed by by Consultant / NABARD. |
| 74 | STAIRCASE (DADO & FLOORINGS) :-Providing and fixing rectified glazed ceramic tiles of size 300 x 300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to I.S. 15622-2006, of approved make, pattern and colour for dado in the dry area including preparing the surface and levelling in the desired line on backing of 20 mm thick cement mortar in porportion 1:3 ( 1 cement : 3 fine sand) , square cut top edge or chamfered top edge in cement mortar 1:4 (1 cement : 4 coarse sand), cement float, machine cutting, leveling, jointing, filling the joints with neat cement slurry or approved colour grout, finishing, curing etc at all locations with necessary lead & lifts complete as directed by Consultant / NABARD. |
| 75 | Providing and laying 15/16 mm thick Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawingsover 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. at locations with necessary leads & lifts complete as specified and as directed by theconsultant.Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent. |
| 76 | INTERNAL RENOVATION WORKS OF 1 BHK FLATS AND COMPLETE RENOVATION AT NARARD STAFF QUARTERS.DAANMODARPARK.GHATKOPAR(W), MUMBAI (Rates to be provided per flat basis).Enabeling Work:- BREAKING OF INTERNAL PLASTER:-Dismantling/ Removal of the existing old plaster (both internal and external) of any thickness and at all levels by chisel & hammer / cutter plate or skirting including raking out joints and cleaning the surface for re-plaster. Rates quoted to include removing all debris, spalls, including cleaning the site, lowering down the debris to the ground without causing dust nuisance and damage to the structure and carting away the debris outside the building compound upto the municipal dump with required municipal permision with all lead and lift. |
| 77 | BREAKING OFKITCHEN , BATH &TOILETWATERPROOFING :-Removing the existing waterproofing layers of china mosaic flooring and bedding brick bat coba of any thickness over the existing terrace floor including cement vatta, if required and exposing the RCC slab top and cleaning the surface. Rates quoted to include removing all debris, spalls, including cleaning the site, lowering down the debris to the ground floor without casuding dust nuisance and damage to the structure and carting away the debris outside the building compound upto the municipal dump with required municipal permision with all lead and lift, etc. complete. |
| 78 | Removing existing door, windows and clerestory windows withframeand shuttersincluding frames, architraves, holdfast, jambs, etc. and stacking the dismantled materials within the building compound at designated location including all leads & lifts, making good to the existing surface, etc. complete as instructed and directed. |
| 79 | Removing mosaic, cement marble, granites non-slippery, tandur, kotah, shahabad stone or Indian Pattern stone, glazed tiles of any thickness in flooring and dado including the bedding cement mortar or tile adhesive and removing all debris, spalls, including cleaning the site, lowering down the debris to the ground floor without casuding dust nuisance and damage to the structure and carting away the debris outside the building compound upto the municipal dump with required municipal permision with all lead and lift, etc. complete. |
| 80 | Removing urinal pans and wash hand basins with frame including disconnecting the sanitary and water supply connections, removing the same carefully, stacking the serviceable materials within the building compound at designated location including all leads & lifts, cleaning the site, lowering down the debris to the ground floor without casuding dust nuisance and damage to the structure and carting away the debris outside the building compound upto the municipal dump with required municipal permision with all lead and lift, etc. complete as directed by theconsultant |
| 81 | Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed concrete around pan removing the same carefully and stacking the serviceable materials within the building compound at designated location including all leads & lifts, cleaning the site, lowering down the debris to the ground floor without casuding dust nuisance and damage to the structure and carting away the debris outside the building compound upto the municipal dump with required municipal permision with all lead and lift, etc. complete as directed by theconsultant |
| 82 | MASONRY & PLASTERING WORKS:-INTERNAL PLASTER:-Providing and applying 12 mm thick (average) internal plaster for walls by using premixed formulated readymade plaster mortar of approved brand and manufacturer, as per the manufacturer\"s recommendation, in single coat to concrete members- brick work etc at all heights and locations in internal areas including surface preparation, raking out joints, hacking concrete surface, finishing in smooth line and level, curing, scaffolding etc. complete. as specified and directed by theconsultant |
| 83 | INTERNAL PLASTER (Ceiling)Providing and applying 6 mm thick (average) internal plaster for ceilings by using premixed formulated readymade plaster mortar of approved brand and manufacturer, as per the manufacturer\"s recommendation, in single coat to concrete members/ brick work etc at all heights and locations in internal areas including surface preparation, raking out joints, hacking concrete surface, finishing in smooth line and level, curing, scaffolding etc. complete. as specified and directed by theconsultant |
| 84 | Scrapping the existing paint/ PoP/ putty layer upto cement plastered surface from walls and ceiling area either manually with wire brush or blades or using mechanical devices and rubbing with sand paper at all locations and heights including scaffolding, tools, tackles, filling the cracks with premium acrylic crack filler putty, even up the surface by any approved means, etc. complete as directed by theconsultant |
| 85 | WALL CARE PUTTY :-Providing and applying white cement based putty of approved brand and manufacture of average thickness of 2 mm or more in two coats, over the plastered surface or over the scrapped surface at all locations and heights, and preparing the surface even and smooth complete including scaffolding, cleaning and preparing surface for painting, etc. to the satisfaction of theconsultant. |
| 86 | MASONRY LEDGE WALL IN TOILET:-Providing and constructing half brick masonry in cement ortar 1:4 with common burnt clay FPS brick of class. |
| 87 | TOILET , BATH & KITCHEN WATERPROOFING WORK :-Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years\" guarantee on requisite stamp paper including curing etc. complete |
| 88 | INTERNAL PLUMBING WORK& SANITARY FITTINGS:-100MM W/C LINE PVC:Providing and fixing in position uPVC/SWR (Soil/Waste/Rain) pipe of type-B 100 mm dia. in any position including all fittings and accessories, making joints / connections water tight with solvent cement, scaffolding if necessary and making good the damages if any (excluding excavation and refilling the trenches) etc. complete as specified and directed.(All fittings and accessories like clamps,etc. should be of same brand. No separate payment shall be made for fittings and accessories). |
| 89 | 20MMCPVCRemoving existing water pipes including brackets & Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Consultant / NABARD.Concealed work including cutting chases and making good the walls etc.i) 20 mm nominal outer dia PipesRemoved/Dismantled piping shall be the property of the contractor and to be removed from site with the approval of PMC/CLIENT. |
| 90 | Supply, Installation, Testing and Commissioning of 15mm diaCP Brass Bib CockJaquar Continental Prime COP -037 PM with wall flange or Equivalentincluding necessary sockets/union nut, extension pieces, etc. complete of approved make as per technical specification and directions ofconsultant. |
| 91 | Supply, Installation, Testing and Commissioning of approved make / model15mm diaC.P. Angular stop cock with wall flangeJaquar Continental Prime COP- 057 PM or Equivalent including necessary sockets/union nut etc. as per technical specifications and directions of PMC/CLIENT. |
| 92 | Supplying and Fixingstop cock Jaquar Continental Prime COP- 083 KPM Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange with Seal (compatible with ALD-083 & ALD-089) or Equivalent |
| 93 | Providing and fixing Chrome Finish SS Health faucet wJaquar ALD - 577 Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer) Flow rate: 11.64 LPM or Equivalentor equivalent all complete, as per specification and direction ofconsultant. |
| 94 | Supplying and Fixing2-way Bib Cock Jaquar Continental Prime COP- 041 PM or Equivalent |
| 95 | Supplying and FixingSink cock Jaquar Continental Prime COP -374 PM with Pipe Swinging Spout (Wall Mounted Model) with Wall Flange or Equivalent |
| 96 | Supply, Installation, Testing and Commissioning of approved make 10/15 cm PVC nahani trap with grating etc.complete. of approved make as per technical specifications and directions ofconsultant. |
| 97 | Supplying and FixingWall MixerJaquar Continental Prime COP- 273 PM with Provision For Overhead Shower withspout , 115mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flanges or Equivalent |
| 98 | Supplying and Fixing Head Shower Assembly Jaquar OHS -497 N Overhead Shower ø190mm Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System or Equivalent |
| 99 | Supplying and FixingWall Mounted Shower Arm Jaquar SHA -477 Shower Arm Casted 190mm Long Light Body Round Shape for Wall Mounted Showers with Flange or Equivalent |
| 100 | Supply, Installation, Testing and Commissioning of automatic 3 litres Instant Geyser of vertical wall mount type with the listed technical specifications of approved make and model including providing and fixing Concealed Stop / Angle Cockwith supply of consumable material such asflexible pipe /C.P. pipe as per the length required, hot dip galvanised Brackets & Nut-bolts, Anchor Fasteners C.P. Elbow of approved make complete with connections, etc. as per the directions ofconsultant.(i) Power Consumption : 3 KW(ii) Energy Efficiency Rating : 4 star(iii) Maximum Operating Pressure : 8 Bars(iv) Adjustable temperature knob : Yes(v) Body Material : ABS Plastic with rust proof and corrosion resistant(vi) Tank Details : SS 304 tank with fusible plug insulation type and safety valve(vii) Protections : Auto Shut Off, Built-in thermostat, Dry heat and over heat protection, high water pressure protection |
| 101 | Providing and fixing of SS single Soap traySupplying and Fixing Jaquar ACN- 1131 N or Equivalentall fittings and all complete, as per specification and direction ofconsultant. |
| 102 | Providing and fixing towel rail Jaquar ACN- 1111 SM Single Towel Rail 600mm Long, Stainless Steel or Equivalent |
| 103 | Supplying and Fixing Wash Basin of modelParryware Oxford Wall Hung basin of product code. WPC04341C (550 x 400 x 200 mm) or Equivalent |
| 104 | Supplying and Fixing Pillar CockJaquar Continental Prime COP- 011 PM or Equivalent |
| 105 | Supplying and Fixing BOTTLE TRAP Jaquar- ALD-767L250 X190or equivalent |
| 106 | Supplying and FixingWASTE COUPLING Jaquar ALD 705 |
| 107 | Supplying and Fixing WCParryware Cardiff Rimless Wall Hung of model No. C022C and Product code. WPC022K1C (520 x 350 x 375 mm) or Equivalent / Parryware Verve Wall Hung of model no. C0295 and Product code. WPC022F1C (560 x 360 x 350 mm) or Equivalent |
| 108 | Supplying and Fixing Flushing Cistern Parryware Slimline Premium Polymer Cistern of model no. WPE83921C or equivalent |
| 109 | Supplying and Fixing Jaquar ACN- 1173 Corner Glass Shelf (with Bracket) or Equivalent |
| 110 | Supplying and FixingJaquar ACN- 1153 S Toilet Roll Holder with Stainless Steel Flap or Equivalent |
| 111 | Supplying and Fixing Storage cabinet with 4 shelves made of durable plastic body with precision cut mirror of size 250 x 350 x 100 mm (L x H x D) for wash basins |
| 112 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 113 | Supplying and Fixing Jaquar ACN- 1121 BN Towel Ring Round with Round Flange or Equivalent |
| 114 | Supplying and Fixing tumbler holderJaquar ACN- 1141 N or Equivalent |
| 115 | Supplying and FixingRobe Hook Jaquar ACN- 1161 N Double Coat Hook or Equivalent |
| 116 | FLOORING , SKIRTING & DADOWORK :-Providing and laying of size 600 x 600 mm glazed vitrified tiles of polished finish (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, for flooring in approved pattern /design as per the architectural drawings including surface preparation, cement mortar bedding of 20 mm thick in 1:4 proportion, cutting, leveling, jointing with grey cement slurry at 3.3 kg/ sqm, filling the joints by approved colour grout, curing, finishing etc complete as directed by Consultant / NABARD. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 117 | Providing and laying rectified glazed ceramic tiles with anti skid/ matt finish of size 300 x 300 mm or more (thickness to be specified by the manufacturer)conforming to IS: 15622, of approved make, in all colours and shades, for flooring in approved pattern /design as per the architectural drawings including surface preparation, cement mortar bedding of 20 mm thick in 1:4 proportion, cutting, leveling, jointing with grey cement slurry at 3.3 kg/ sqm, filling the joints by approved colour grout, curing, finishing etc complete as directed by Consultant / NABARD. |
| 118 | Providing and fixing glazed vitrified tiles (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades for flush/projected skirting / riser for height upto 150mm approved pattern /design as per the architectural drawings including preparing the surface and levelling in the desired line, backing of 20 thk. cement mortar in porportion 1:3, square cut top edge or chamfered top edge in cement mortar 1:3, cement float, machine cutting, leveling, jointing, filling the joints by approved colour grout, finishing, curing etc complete as directed by Consultant / NABARD. |
| 119 | Providing and fixingrectified glazed ceramic tiles of size 300 x 300 mm or more (thickness to be specified by the manufacturer)conforming to IS: 15622, of approved make, in all colours and shades, for dado in the wet areain approved pattern /design as per the architectural drawings including preparing the surface and levelling in the desired line, backing of 20 thk. cement mortar in porportion 1:3 with approved waterproofing compound, square cut top edge or chamfered top edge in cement mortar 1:3, cement float, machine cutting, leveling,jointing with grey cement slurry at 3.3 kg/ sqm, filling the joints by approved colour grout, finishing, curing etc complete as directed by Consultant / NABARD. |
| 120 | Modular kitchen & Wardrobe :-Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc., providing edge moulding and polishing of top and edges to give high gloss finish etc. complete at all levels. - Granite stone slab of colour black, Cherry/Ruby red with Area of slab over 0.50 sqm |
| 121 | Providing and preparing kitchen Platform of size up to 75 cm width and made up from 30 mm thick and 75 cm high vertical support kadappa slabs placed at spacing required as per the drawings for installation of modular kitchen accessories & shutters and 35 mm thick kadappa top slab placed above the supports including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning, cutting opening for sink of required size, providing 25 mm thick both side polished kadappa middle shlef and 20 mm thick one side polished kadappa for bottom slab if required, etc. complete. (The top area including area cut for sink of the kitchen platform will be measured for payment) |
| 122 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required, etc. complete as per the directions of theconsultant - Kitchen sink with drain board of size 510 x 1040 mm and bowl depth 250 mm |
| 123 | Supplying pre-fabricated / factory made modular kitchen units below existing kitchen platform/counter ( approximately 750 mm in height and 700 mm in depth) as per the following specifications and enclosed sketch. The frame work of the cabinets including drawer fascia/ sides/bottom, shelves etc. shall be made out of 16 mm thick Marine plywood ( Century plywood, Kit Gold, Greenply, Western India Plywood, AEON or approved equivalent make). Shutters shall be made out of 16 mm thick Marine plywood (Century plywood, Kit Gold, Greenply, Western India Plywood, AEON or approved equivalent make). Each shutter shall be fixed to the framework using two numbers of best quality EURO type Slip/Auto Hinges (Ebco, Hettich, Hafele or approved equivalent make) and provided with one approved quality and profile brush finished Stainless Steel (SS) handle of grade 304 (minimum 150 mm long) Each drawer fascia shall be made out of 16 mm thick Marine plywood (Century plywood, Kit Gold, Greenply, Western India Plywood, AEON or approved equivalent make) and approved quality and make SS 304 grade baskets / accessories (Hettich, Ebco, Hafele or approved equivalent make) shall be mounted on approved quality, high precision telescopic channels/slides (Ebco, Hettich, Hafele or approved equivalent make) to be designed as per drawer size and to meet the weight requirement with minimum length of 500 mm to ensure smooth movements of drawer with /without content weightsand provided with approved quality 150mm size SS handles of grade 304. The telescopic channel rails may be provided.as per specifications. In each kitchen there should be a minimum of 1No. perforated Cutlery basket(4” size), 1 No. cup & saucer basket(6” size), 1 No. \"Thali\" basket(8” size), 2 Nos of plain multipurpose baskets(8” size), 1 No. three tier oil/masala ‘Pull out’, 1 No. shutters below the sink with bin holder(Dia 250mm, Height 145mm), 1 No foldable shutter at the mid corner portion & 1 No plain shutters at left hand corner. The shutters shall be of 16-18mm Marine plywood fascia/ sides/bottom as required as per the drawings given. All the stainless steel baskets shall be of maximum size which can be accommodated in the respective space available inside each cabinets for smooth functioning of railing. The Stainless Steel rods provided in the baskets shall be of combination of 5.5mm dia and 2.8mm dia rods and the spacing of these various steel rods in the baskets shall not be less than that of the samples\" baskets available with the Bank(Tenderers are advised to view the baskets available with the bank before quoting rate). All shelves shall be supported on approved quality Stainless Steel(SS) pins and shall be adjustable for various height requirements. The unit shall be firmly fixed to the walls/slabs/floor using non-corrossive metal screws of appropriate size and rawl plugs. All exposed surfaces and internal surfaces of the units shall havemachine pressed lamination having thickness 1mm and 0.8mm respectively of approved shade and make (Merino, Greenlamor approved equivalent) and pasted withsynthetic resin based adhesive (Fevicol, Vamicol or approved equivalent) etc. The thickness of four edge PVC lipping for shutters and drawer fascia shall be 2mm thick, thickness of edge lipping of carcass/ plywood partition should be 0.8mmand thickness of four edge lipping around the rebate of glass shutter shall be 0.6mm.The lippings/banding shall match with the external laminate shade. All faces and edges of Kadappahsupport slabs below the kitchen slab, wooden planks for supporting telescopic channel rails and wooden fillers shall be painted with a coat of synthetic enamel primer and two coats of white colour synthetic enamel paint. Payment shall be made on the basis of front elevation area of modular units only. It is clarified that sides, top and bottom surfaces will not be measured for payment. The wooden frame for shutter shall be made of minimum 70 mm wide marine plywood with lamination, wherever required. The telescopic channel shall be supported with 75 mm wide vertical and horizontal marine plywood members with laminate fixed on vertical Kadaph stone. If there is a need of erecting additional vertical marine plywood members with laminate on account of site conditions, the quoted rate shall have provision of carrying out these works. All necessary hardwares, wooden members with required thickness for fixing telescopic channel rails and filling the gaps shall be included in the quoted rate. The quoted rate shall include making of vertical partition below the existing kitchen slab with 16 mm thick marine plywood if necessary to accommodate modular kitchen units as per the requirement.Rate in words- |
| 124 | Supplying of pre-fabricated / factory made Over head kitchen cabinet units of 600 mm &300mm in hight and 300 mm in depth as per the following specifications and enclosed sketch. The frame work or carcass of the cabinets, its sides/bottom, shelves etc. shall be made out of 16 mm thick Marine plywood (Century plywood, Kit Gold, Greenply, Western India Plywood, AEON or approved equivalent make). Glazed shutters ofcabinets as per the drawing shall be made out of 16 mm thick Marine plywood (Century plywood, Kit Gold, Greenply, WIP,AEON or approved equivalent make). Each shutter shall be fixed to the framework /carcass by using two numbers of best quality EURO type Slip/Auto Hinges (Ebco, Hettich, hafele or approved equivalent make) and provided with an approved quality and profile brush finished SS handle (minimum 150 mm long) of 304 grade. The glazed shutters shall have 5mm thick float glass fitted in 16 mm thick marine plywood frame alround with necessary cleats, clips and magnetic catchers. The will be one glass shelf of 10 mm thick edge polished float glass for horizontal partition in each cabinet. The thickness of four edge PVC lipping for shutters shall be 2mm thick, thickness of edge lipping of carcass/ plywoodpartition should be 0.8mmand thickness of four edge lipping around the rebate of glass shutter shall be 0.6mm.The lippings/banding shall match with the external laminate shade. All shelves shall be supported on approved quality SS pins and shall be adjustable for various height requirements. The over head cabinet carcass shall be fitted to the wall with PVC capped 2mm thick concealed MS hanging brackets each having width of 15mm and depth of 50mm @ 2 brackets for each cabinet which is fixed on wall with necessary screws. All exposed surfaces and internal surfaces of the units shall havemachine pressed lamination having thickness 1mm and 0.8mm respectively of approved shade(Merino, Greenlam or approved equivalent) and pasted withsynthetic resin based adhesive (Fevicol, Vamicol or approved equivalent) etc.Measurement will be taken on the basis of front length and height of overhead cabinet units. It is clarified that sides, top and bottom surfaces will not be measured for payment. All necessary hardwares, wooden members for filling the gaps etc shall be included in the quoted rate. Rate in words- |
| 125 | Supplying wooden shutters for the existing vertical storage space at the wall 3 top side in the kitchen with 6 shutters; eachwith two auto hinges and one brush finished SS handle ( minimum size 150 mm ) and as per details below : Shutters as per the sketch shall be made out of 16 mm thick Marine plywood (Century plywood, Kit Gold, Greenply, WIP,AEON or approved equivalent make). Each shutter shall be fixed to the wooden framework by using two numbers of best quality EURO type Slip/Auto Hinges (Ebco, Hettich, hafele or approved equivalent make) and provided with an approved quality and profile brush finished SS handle (minimum 150 mm long) of 304 grade. The thickness of four edge PVC lipping for shutters and drawer fascia shall be 2mm thick with shade matching with the external laminate. All exposed surfaces and internal surfaces of the units shall havemachine pressed lamination having thickness 1mm and 0.8mm respectively of approved shade and make(Merino, Greenlam or approved equivalent) and pasted withsynthetic resin based adhesive (Fevicol, Vamicol or approved equivalent) etc. Measurement will be taken on the basis of front length and height of wooden shutters only. All necessary hardwares, wooden members filling the gaps shall be included in the quoted rate. Rate in words - |
| 126 | Installation, testing, comissioning of all above kitchen modular units at item nos 1, 2 & 3 above, along with all accessories, hardwares and fittings including additional / extra equipment and commissioning inclusive of all taxes, service tax etc. complete. The additional details are as under : Necessary openings/cuttings shall be made on the frame work/granite bozing and Kadappah shelves to insert or accommodate or fix modularunits and other accessories. The quoted rate shall include application charge of painting/polishing of all faces and edges of Kadappah support slabs below the kitchen slab, wooden planks for supporting telescopic channel rails and wooden fillers with one coat of synthetic enamel primer and two coats of synthetic enamel paint. Minor gaps/grooves if any, shall be filled with white cement paste and matching shade of skirting or floor tiles. The quoted rate shall include cost for filling the gaps between modular unit and supporting vertical Kadappah slab with wooden members. Mode of Measurement – The total work in one kitchen of a flat will be treated as one job. Rate in words - |
| 127 | Providing and Fixing the Hanging rack type ( 6\"x 2\") made with 4/5 rows (@ 150mm. c/c) of 15/20mm.dia heavy duty Aluminium/ SS pipe and hang from ceiling with rope and pulley system as available in the market, may be provided in the balcony/ Toilet. |
| 128 | Modular FurniturewardrobeRemoving of existing wardrobe of any size as per the site condition and Providing, making & assembling Wardrobe 1800 x 600 x 2100 mm in heightas per architectural drawing and instructions. The system shallcomprise with following Ply Boxing - Providing, making and fixing 18mmthick commercial ply (IS 303) boxing (for Vertical & horizontal sides). Centrevertical portion shall be made of 2nos. 18mm thick sandwiched commercial ply (IS 303). 12mm commercial ply (IS 303) shall be fixed to the Wardrobe back work as per architectural drawing & instructions. Finished the wardrobe with 1mm thick approved white laminate (IS 2046-1969/1995)from inside and 1mm thick approved laminate (IS 2046-1969/1995) from out side at visible side and hidden surface shall be finished with french polish as per drawing. Wardrobe Shutters- Providing & making 4 nos. equal wardrobe shutters 2100 mm high made out 25mm thick block board (IS 1659:2004) hungto the ply boxing with heavy duty ss hinges of approved make. Shutter shall be finished with 1mm thick approved laminate (IS 2046-1969/1995) from out side and 1mm thick approved white laminate (IS 2046-1969/1995)from inside. 12mm thick teak wood beading for shutter finished with approved melamine polish matching to the laminate (IS 2046-1969/1995) as per drawings.Drawers -Providing & fixing 4 Nos 400 x 165 mm high Drawers to be made in 18 mm thick commercial ply (IS 303)front & side, back & bottom from 12 mm thick commercial ply (IS 303)drawer shall be finished with 1 mm thickapproved laminate (IS 2046-1969/1995) from out side and 1mm thick approved white laminate (IS 2046-1969/1995)from inside. Fixed the drawers to thewardrobe with telescope channels properly as per architectural drawings and as per specification and instructions.Rate also included providing, making & fixing 20mm thick fixed shelves ( 2 nos 850 x 600mm in size in size) made of 18mm commercial ply(IS 303) finished with approved 1mm thick white laminate (IS 2046-1969/1995) at all sides. Rate also included p/f 8mm thick modi or equivalent make approved mirror on shutter as per architectural drawing including necessary hardware of approved make, necessary beads, mouldings, 75 mm high skirting, lipping, providing & fixing 25mm dia. 850 mm long 2no. SS pipe for hanger of approved make, providing & fixing 8 nos ss hooks of approved make completed as specified.Hardware fittings & Fixtures--a) SS finished Heavy duty \"L\" Hinges (75 x 19 x 6mm in size)- 16 nos.b) Concealed Lock- 2 nos.c)150 mm long SS Tower Bolt- 2nose)Heavy duty magnetic catch- 4 Nosf) SS handle 300 mm long - 4 nosg) Drawer lock - 4 nosg) SS Hooks - 8Nos. |
| 129 | DOORS & WINDOWS :-Providing second class teak wooden frames of approved sizes for doors, windows, ventilators, clerestory windows and other frames, including fixing the frame in position by providing 40 x 5 mm flat iron hold fast lugs of 400 mm long and fixing the hold fast to the frames with 10 mm diameter bolts, nuts and wooden plugs and embedding embedding in cement concrete block 300x100x150 mm 1:3:6 mix or with dash fasteners of required dia & length or with suitable anchor fasteners of approved size and length, all moulding, rebating, jointing and finishing with 3 coats of French polish or one coat of primer and synthetic enamel paint in two coats, etc. complete as directed and specified by theconsultant |
| 130 | Providing and fixing 35 mm thick ISI marked flush door shutters of approved make conforming to IS : 2202 (Part I) with core of block board construction with frame of 1st class hard wood and well matched teak with decorative type 3 ply veneering with vertical grains or cross bands and face veneers on one side and non-decorative type 3 ply veneering with vertical grains or cross bands and face veneers on another side including fixing to the frames with required nos of stainless steelbutt hinges conforming with IS 12817 of size 125 x 64 x 2.50 mm with necessary SS screws andlipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters, etc. complete as directed by Consultant / NABARD. |
| 131 | Providing and fixing 30 mm thick ISI marked flush door shutters of approved make conforming to IS : 2202 (Part I) with core of block board construction with frame of 1st class hard wood and well matched teak with non- decorative type 3 ply veneering with vertical grains or cross bands and face veneers on both the faces of the shutter including fixing to the frames with required nos of stainless steelbutt hinges conforming with IS 12817 of size 125 x 64 x 2.50 mm with necessary SS screws andlipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters, etc. complete as directed by Consultant / NABARD. |
| 132 | Providing and applying white cement based putty of approved brand and manufacture of average thickness of 2 mm or more in two coats, over the door shutters and preparing the surface even and smooth complete including cleaning and preparing surface for painting, etc. to the satisfaction of theconsultant. |
| 133 | Painting with two coats of synthetic enamel paint of approved brand and manufacture of required colour to give an even shadeincluding one coat of approved primer, scaffolding, cleaning, preparing the surface for painting by approved means, applying additional coats wherever required to achieve even shade and colour, etc. complete as directed by theconsultant. |
| 134 | Providing and applying two or more coats of french spirit polishing of approved brand and manufacturer including a coat of wood filler inlcuding preparing the surface for painting by approved means, applying additional coats wherever required to achieve even shade and colour, etc. complete as directed by theconsultant. |
| 135 | Providing and fixing 125 mm long chromium plated brass handles for doors and windows and with necessary materials and fixtures like screws etc. and all labour etc. complete |
| 136 | Providing and fixing 300 mm long Stainless Steel aldrops set made of 16mm diameter bars for doors and windows and with necessary materials and fixtures like screws etc. and all labour etc. complete |
| 137 | Providing and fixing Stainless Steel hanging type door stopper set for doors with necessary materials and fixtures like screws etc. and all labour etc. complete |
| 138 | Providing and fixing 300 mm long Stainless Steel aldrops set made of 16mm diameter bars for doors and windows and with necessary materials and fixtures like screws etc. and all labour etc. complete |
| 139 | Providing and fixing 250 x 10 mm bright finished brass tower bolts (barrel type) for doors and windows and with necessary materials and fixtures like screws etc. and all labour etc. complete |
| 140 | Providing and fixing 100 x 10 mm bright finished brass tower bolts (barrel type) for doors and windows and with necessary materials and fixtures like screws etc. and all labour etc. complete |
| 141 | Providing and fixing Stainless Steel with chromium plated peep holes, manufactured as per IS, for doors with necessary materials and fixtures like screws etc. and all labour etc. complete |
| 142 | Providing and fixing type-2 (reversible latch) single side key operated rim locks along with the set of three keys manufactured as per best engineering practice of approved brands condorming to IS 9131 having 1 no. of deadbolt with double turn and 1 latch bolt for strong locking and safety locking/ unlocking from the inside with knob turn mechanism for main doors with necessary mounting accessories, materials and fixtures like screws etc. and all labour etc. complete |
| 143 | Providing and fixing Fiber Glass Reinforced plastic (FRP) DoorFrames of cross-section 90mm x 45mm having rebates of 32mm x15mm size to receive shutter of 30mm thickness. The laminate shallbe moulded with fire resistant grade unsaturated polyester resin andchopped mat. Door frame laminate shall be 2mm thick and shall befilled with suitable wooden block in the frame. The frame shall becovered with fiberglass from all sides. M.S. stay shall be provided atthe bottom to steady the frame etc. complete as directed. |
| 144 | Providing and fixing to frames 30 mm thick Fibre Glass Reinforced Plastic (FRP) panelled / extruded profiled door shutter of approved colour, brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS: 14856 - 2000 etc complete as directed. |
| 145 | Providing and fixing 25 mm dia chromium plated brass curtain rod having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., complete as directed and specified by theconsultant |
| 146 | Providing and fixing Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)works for frames and shutters of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, including fixing with dash fasteners of required dia and size, necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket, providing and fixing hinges/ pivots and fittings wherever required including the cost of required EPDM rubber / neoprene gasket, etc.The Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required inluding cleat angles, aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, etc. all complete as per architectural drawings and the directions ofconsultant. etc. (Glazing will be paid for separately) |
| 147 | Providing and fixing Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions ofconsultant . |
| 148 | Providing and fixing glazing with float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions ofconsultant . |
| 149 | Providing and fixing in position aluminum louvered window with anodised aluminum frame of approved make and of size 40mm x 20mm x 2.0mm (wt. 0.605 kg/Rm) including adjustable aluminum frame, 4 to 6mm thk. frosted glass, fixtures and fastenings etc. complete as directed by by Consultant / NABARD |
| 150 | Providing & fixing 20 mm thick machine cut mirror polish 1st quality Granite window sill (black galaxy or approved shade) including edge polishing, backing coat of 1:4 cement plaster / mortar/cement paste , cleaning etc. complete as per Architects details drawing and design. |
| 151 | PAINTINGWORK :- INTERNAL PAINT:Distempering with two coats of 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved make and colour at all locations and heights, including one coat of approved primer, scaffolding, cleaning, preparing the surface for painting by approved means, applying additional coats wherever required to achieve even shade and colour, etc. complete as directed by theconsultant. |
| 152 | Electrical Work:-Wiringforlightpoint/fanpoint/ exhaust fan point/ call bell point with1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modularplate,suitableGIboxand earthingthepointwith1.5sq.mm FRLS PVC insulated copper conductorsinglecorecableetc.as required. a) Group C |
| 153 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor,singlecorecableinthe existing surface/ recessed steel/ PVC conduit as required a) 3 x 1.5 sq mm |
| 154 | b) 2 x 1.5 sq mm |
| 155 | c) 2 x 1.5 sq mm |
| 156 | d) 2 x 2.5 sq mm |
| 157 | e) 2 x 2.5 sq.mm |
| 158 | f) 2 x 4 sq mm |
| 159 | g) 2 x 4 sq mm |
| 160 | Supplyingandfixingoffollowing sizes of medium class PVC conduit along with accessories in surface/recessincludingcuttingthe wallandmakinggoodthesameincase of recessed conduit as required.:-a) 20mm |
| 161 | SupplyinganddrawingofUTP4 pair CAT 6 LAN Cable in the existingsurface/recessedSteel/ PVC conduit as required. a) 1 run of cable |
| 162 | Supplyingandfixingfollowing modularswitch/socketonthe existing modular plate & switch box including connections but excluding modular plate etc. as required. a) 5/6 A switch |
| 163 | b) 15/16 Amp Switch |
| 164 | c) 3 pin 5/6 A socket outlet |
| 165 | d) 6 Pin 15/16 Amp Socket |
| 166 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.a) 1 or 2 Module |
| 167 | b) 3 Module |
| 168 | c) 4 Module |
| 169 | d) 6 Module (200mmX75mm) |
| 170 | e) 8 Module (125mmX125mm) |
| 171 | f) 12 Module (200mmX150mm) |
| 172 | Supplying,installation,Testing& Commissioning of 30W Suspended/SurfaceMounted1x4ft LED Ceiling Light with White PowdercoatedCRCAHousing, lumenoutput notlessthan100 lm/watt,CCTnotlessthan5700K, CRI>80, PF>0.90 , & operating 230Volt 50Hz Power Supply i/c connectionwith3core1sqmm FRLS cu conductor etc complete asrequired. |
| 173 | Supply, Installation, Testing and Commissioningof1200mmsweep, BEE 5 star rated, ceiling fan with Brush LessDirect Current (BLDC)Motor, class of insulation: B, 3 nos. blades, 30 cmlongdownrod,2nos.canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value(CMM/W)minimum6.85,Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD lessthan10%,remoteorelectronic regulator unit for speed control and all remainingaccessoriesincludingsafety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase ACSupply,earthingetc.completeas required. |
| 174 | Supplying and fixing 63A 415 V \"C\" curve 10KA TPN MCB in Existing DBs complete with connections, testingandcommissioningetc.as required. |
| 175 | Dismantlingofelectricalmateriali.ewiring,switches,sockets, Boards, PVC casing MCB\"s & DB\"s, ceilingfans,fittingsetcincluding disconnection and stacking of material in suitable place as perdirection ofConsultant / NABARD. |
| 176 | INTERNAL RENOVATION WORKS OF2BHK FLATS AND COMPLETE RENOVATION AT NARARD STAFF OUARTERS.DAANMODARPARK.GHATKOPAR(W), MUMBAI. ENABLING WORKS:-BREAKING OF INTERNAL PLASTER:-Dismantling/ Removal of the existing old plaster (both internal and external) of any thickness and at all levels by chisel & hammer / cutter plate or skirting including raking out joints and cleaning the surface for re-plaster. Rates quoted to include removing all debris, spalls, including cleaning the site, lowering down the debris to the ground without causing dust nuisance and damage to the structure and carting away the debris outside the building compound upto the municipal dump with required municipal permision with all lead and lift. |
| 177 | BREAKING OFKITCHEN , BATH &TOILETWATERPROOFING :-Removing the existing waterproofing layers of china mosaic flooring and bedding brick bat coba of any thickness over the existing terrace floor including cement vatta, if required and exposing the RCC slab top and cleaning the surface. Rates quoted to include removing all debris, spalls, including cleaning the site, lowering down the debris to the ground floor without casuding dust nuisance and damage to the structure and carting away the debris outside the building compound upto the municipal dump with required municipal permision with all lead and lift, etc. complete. |
| 178 | Removing existing door, windows and clerestory windows withframeand shuttersincluding frames, architraves, holdfast, jambs, etc. and stacking the dismantled materials within the building compound at designated location including all leads & lifts, making good to the existing surface, etc. complete as instructed and directed. |
| 179 | Removing mosaic, cement marble, granites non-slippery, tandur, kotah, shahabad stone or Indian Pattern stone, glazed tiles of any thickness in flooring and dado including the bedding cement mortar or tile adhesive and removing all debris, spalls, including cleaning the site, lowering down the debris to the ground floor without casuding dust nuisance and damage to the structure and carting away the debris outside the building compound upto the municipal dump with required municipal permision with all lead and lift, etc. complete. |
| 180 | Removing urinal pans and wash hand basins with frame including disconnecting the sanitary and water supply connections, removing the same carefully, stacking the serviceable materials within the building compound at designated location including all leads & lifts, cleaning the site, lowering down the debris to the ground floor without casuding dust nuisance and damage to the structure and carting away the debris outside the building compound upto the municipal dump with required municipal permision with all lead and lift, etc. complete as directed by theconsultant |
| 181 | Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed concrete around pan removing the same carefully and stacking the serviceable materials within the building compound at designated location including all leads & lifts, cleaning the site, lowering down the debris to the ground floor without casuding dust nuisance and damage to the structure and carting away the debris outside the building compound upto the municipal dump with required municipal permision with all lead and lift, etc. complete as directed by theconsultant |
| 182 | MASONRY & PLASTERING WORKS:-INTERNAL PLASTER:-Providing and applying 12 mm thick (average) internal plaster for walls by using premixed formulated readymade plaster mortar of approved brand and manufacturer, as per the manufacturer\"s recommendation, in single coat to concrete members- brick work etc at all heights and locations in internal areas including surface preparation, raking out joints, hacking concrete surface, finishing in smooth line and level, curing, scaffolding etc. complete. as specified and directed by theconsultant |
| 183 | INTERNAL PLASTER (Ceiling)Providing and applying 6 mm thick (average) internal plaster for ceilings by using premixed formulated readymade plaster mortar of approved brand and manufacturer, as per the manufacturer\"s recommendation, in single coat to concrete members/ brick work etc at all heights and locations in internal areas including surface preparation, raking out joints, hacking concrete surface, finishing in smooth line and level, curing, scaffolding etc. complete. as specified and directed by theconsultant |
| 184 | Scrapping the existing paint/ PoP/ putty layer upto cement plastered surface from walls and ceiling area either manually with wire brush or blades or using mechanical devices and rubbing with sand paper at all locations and heights including scaffolding, tools, tackles, filling the cracks with premium acrylic crack filler putty, even up the surface by any approved means, etc. complete as directed by theconsultant |
| 185 | WALL CARE PUTTY :-Providing and applying white cement based putty of approved brand and manufacture of average thickness of 2 mm or more in two coats, over the plastered surface or over the scrapped surface at all locations and heights, and preparing the surface even and smooth complete including scaffolding, cleaning and preparing surface for painting, etc. to the satisfaction of theconsultant. |
| 186 | MASONRY LEDGE WALL IN TOILET:-Providing and constructing half brick masonry in cement ortar 1:4 with common burnt clay FPS brick of class. |
| 187 | TOILET , BATH & KITCHEN WATERPROOFING WORK:-Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years\" guarantee on requisite stamp paper including curing etc. complete |
| 188 | INTERNAL PLUMBING WORK& SANITARY FITTINGS:-100MM W/C LINE PVC:Providing and fixing in position uPVC/SWR (Soil/Waste/Rain) pipe of type-B 100 mm dia. in any position including all fittings and accessories, making joints / connections water tight with solvent cement, scaffolding if necessary and making good the damages if any (excluding excavation and refilling the trenches) etc. complete as specified and directed.(All fittings and accessories like clamps,etc. should be of same brand. No separate payment shall be made for fittings and accessories). |
| 189 | 20MMCPVCRemoving existing water pipes including brackets & Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Consultant / NABARD.Concealed work including cutting chases and making good the walls etc.i) 20 mm nominal outer dia PipesRemoved/Dismantled piping shall be the property of the contractor and to be removed from site with the approval of PMC/CLIENT. |
| 190 | Supply, Installation, Testing and Commissioning of 15mm diaCP Brass Bib CockJaquar Continental Prime COP -037 PM with wall flange or Equivalentincluding necessary sockets/union nut etc. complete of approved make as per technical specification and directions of PMC/CLIENT. |
| 191 | Supply, Installation, Testing and Commissioning of approved make / model15mm diaC.P. Angular stop cock with wall flangeJaquar Continental Prime COP- 057 PM or Equivalent including necessary sockets/union nut etc. as per technical specifications and directions of PMC/CLIENT. |
| 192 | Supplying and Fixingstop cock Jaquar Continental Prime COP- 083 KPM Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange with Seal (compatible with ALD-083 & ALD-089) or Equivalent |
| 193 | Providing and fixing Chrome Finish SS Health faucet wJaquar ALD - 577 Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer) Flow rate: 11.64 LPM or Equivalentor equivalent all complete, as per specification and direction ofconsultant. |
| 194 | Supplying and Fixing2-way Bib Cock Jaquar Continental Prime COP- 041 PM or Equivalent |
| 195 | Supplying and FixingSink cock Jaquar Continental Prime COP -374 PM with Pipe Swinging Spout (Wall Mounted Model) with Wall Flange or Equivalent |
| 196 | Supply, Installation, Testing and Commissioning of approved make 10/15 cm PVC nahani trap with grating etc.complete. of approved make as per technical specifications and directions of PMC/IOCL. |
| 197 | Supplying and FixingWall MixerJaquar Continental Prime COP- 273 PM with Provision For Overhead Shower withspout , 115mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flanges or Equivalent |
| 198 | Supplying and Fixing Head Shower Assembly Jaquar OHS -497 N Overhead Shower ø190mm Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System or Equivalent |
| 199 | Supplying and FixingWall Mounted Shower Arm Jaquar SHA -477 Shower Arm Casted 190mm Long Light Body Round Shape for Wall Mounted Showers with Flange or Equivalent |
| 200 | Supply, Installation, Testing and Commissioning of automatic 3 litres Instant Geyser of vertical wall mount type with the listed technical specifications of approved make and model including providing and fixing Concealed Stop / Angle Cockwith supply of consumable material such asflexible pipe /C.P. pipe as per the length required, hot dip galvanised Brackets & Nut-bolts, Anchor Fasteners C.P. Elbow of approved make complete with connections, etc. as per the directions ofconsultant.(i) Power Consumption : 3 KW(ii) Energy Efficiency Rating : 4 star(iii) Maximum Operating Pressure : 8 Bars(iv) Adjustable temperature knob : Yes(v) Body Material : ABS Plastic with rust proof and corrosion resistant(vi) Tank Details : SS 304 tank with fusible plug insulation type and safety valve(vii) Protections : Auto Shut Off, Built-in thermostat, Dry heat and over heat protection, high water pressure protection |
| 201 | Providing and fixing of SS single Soap traySupplying and Fixing Jaquar ACN- 1131 N or Equivalentall fittings and all complete, as per specification and direction ofconsultant. |
| 202 | Providing and fixing towel rail Jaquar ACN- 1111 SM Single Towel Rail 600mm Long, Stainless Steel or Equivalent |
| 203 | Supplying and Fixing Wash Basin CounterParryware Oxford Wall Hung basin of product code. WPC04341C (550 x 400 x 200 mm) or Equivalent |
| 204 | Supplying and Fixing Pillar CockJaquar Continental Prime COP- 011 PM or Equivalent |
| 205 | Supplying and Fixing BOTTLE TRAP Jaquar- ALD-767L250 X190or equivalent |
| 206 | Supplying and FixingWASTE COUPLING Jaquar ALD 705 |
| 207 | Supplying and Fixing WCParryware Cardiff Rimless Wall Hung of model No. C022C and Product code. WPC022K1C (520 x 350 x 375 mm) or Equivalent / Parryware Verve Wall Hung of model no. C0295 and Product code. WPC022F1C (560 x 360 x 350 mm) or Equivalent |
| 208 | Supplying and Fixing Flushing Cistern Parryware Slimline Premium Polymer Cistern of model no. WPE83921C or equivalent |
| 209 | Supplying and Fixing Jaquar ACN- 1173 Corner Glass Shelf (with Bracket) or Equivalent |
| 210 | Supplying and FixingJaquar ACN- 1153 S Toilet Roll Holder with Stainless Steel Flap or Equivalent |
| 211 | Supplying and Fixing Storage cabinet with 4 shelves made of durable plastic body with precision cut mirror of size 250 x 350 x 100 mm (L x H x D) for wash basins |
| 212 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 213 | Supplying and Fixing Jaquar ACN- 1121 BN Towel Ring Round with Round Flange or Equivalent |
| 214 | Supplying and Fixing tumbler holderJaquar ACN- 1141 N or Equivalent |
| 215 | Supplying and FixingRobe Hook Jaquar ACN- 1161 N Double Coat Hook or Equivalent |
| 216 | FLOORING , SKIRTING & DADOWORK :-Providing and laying of size 600 x 600 mm glazed vitrified tiles of polished finish (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, for flooring in approved pattern /design as per the architectural drawings including surface preparation, cement mortar bedding of 20 mm thick in 1:4 proportion, cutting, leveling, jointing with grey cement slurry at 3.3 kg/ sqm, filling the joints by approved colour grout, curing, finishing etc complete as directed by Consultant / NABARD. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 217 | Providing and laying rectified glazed ceramic tiles with anti skid/ matt finish of size 300 x 300 mm or more (thickness to be specified by the manufacturer)conforming to IS: 15622, of approved make, in all colours and shades, for flooring in approved pattern /design as per the architectural drawings including surface preparation, cement mortar bedding of 20 mm thick in 1:4 proportion, cutting, leveling, jointing with grey cement slurry at 3.3 kg/ sqm, filling the joints by approved colour grout, curing, finishing etc complete as directed by Consultant / NABARD. |
| 218 | Providing and fixing glazed vitrified tiles (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades for flush/projected skirting / riser for height upto 150mm approved pattern /design as per the architectural drawings including preparing the surface and levelling in the desired line, backing of 20 thk. cement mortar in porportion 1:3, square cut top edge or chamfered top edge in cement mortar 1:3, cement float, machine cutting, leveling, jointing, filling the joints by approved colour grout, finishing, curing etc complete as directed by Consultant / NABARD |
| 219 | Providing and fixing rectified glazed ceramic tiles of size 300 x 300 mm or more (thickness to be specified by the manufacturer)conforming to IS: 15622, of approved make, in all colours and shades, for dado in the wet areain approved pattern /design as per the architectural drawings including preparing the surface and levelling in the desired line, backing of 20 thk. cement mortar in porportion 1:3 with approved waterproofing compound, square cut top edge or chamfered top edge in cement mortar 1:3, cement float, machine cutting, leveling,jointing with grey cement slurry at 3.3 kg/ sqm, filling the joints by approved colour grout, finishing, curing etc complete as directed by Consultant / NABARD. |
| 220 | Modular kitchen & Wardrobe:-Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc., providing edge moulding and polishing of top and edges to give high gloss finish etc. complete at all levels. - Granite stone slab of colour black, Cherry/Ruby red with Area of slab over 0.50 sqm |
| 221 | Providing and preparing kitchen Platform of size up to 75 cm width and made up from 30 mm thick and 75 cm high vertical support kadappa slabs placed at spacing required as per the drawings for installation of modular kitchen accessories & shutters and 35 mm thick kadappa top slab placed above the supports including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning, cutting opening for sink of required size, providing 25 mm thick both side polished kadappa middle shlef and 20 mm thick one side polished kadappa for bottom slab if required, etc. complete. (The top area including area cut for sink of the kitchen platform will be measured for payment) |
| 222 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required, etc. complete as per the directions of theconsultant - Kitchen sink with drain board of size 510 x 1040 mm and bowl depth 250 mm |
| 223 | Supplying pre-fabricated / factory made modular kitchen units below existing kitchen platform/counter ( approximately 750 mm in height and 700 mm in depth) as per the following specifications and enclosed sketch. The frame work of the cabinets including drawer fascia/ sides/bottom, shelves etc. shall be made out of 16 mm thick Marine plywood ( Century plywood, Kit Gold, Greenply, Western India Plywood, AEON or approved equivalent make). Shutters shall be made out of 16 mm thick Marine plywood (Century plywood, Kit Gold, Greenply, Western India Plywood, AEON or approved equivalent make). Each shutter shall be fixed to the framework using two numbers of best quality EURO type Slip/Auto Hinges (Ebco, Hettich, Hafele or approved equivalent make) and provided with one approved quality and profile brush finished Stainless Steel (SS) handle of grade 304 (minimum 150 mm long) Each drawer fascia shall be made out of 16 mm thick Marine plywood (Century plywood, Kit Gold, Greenply, Western India Plywood, AEON or approved equivalent make) and approved quality and make SS 304 grade baskets / accessories (Hettich, Ebco, Hafele or approved equivalent make) shall be mounted on approved quality, high precision telescopic channels/slides (Ebco, Hettich, Hafele or approved equivalent make) to be designed as per drawer size and to meet the weight requirement with minimum length of 500 mm to ensure smooth movements of drawer with /without content weightsand provided with approved quality 150mm size SS handles of grade 304. The telescopic channel rails may be provided as per specifications. In each kitchen there should be a minimum of 1No. perforated Cutlery basket(4” size), 1 No. cup & saucer basket(6” size), 1 No. \"Thali\" basket(8” size), 4 Nos of plain multipurpose baskets(8” size), 1 No. three tier oil/masala ‘Pull out’, 1 No. 2 tier detergent ‘Pull out’, 1 No. shutters below the sink with bin holder(Dia 250mm, Height 145mm),1 No foldable shutter at the mid corner portion for gas cylinder & 2Nos plain shutters each at both wall 1 and wall 2. The shutters shall be of 1618mm Marine plywood fascia/ sides/bottom as required as per the drawings given. All the stainless steel baskets shall be of maximum size which can be accommodated in the respective space available inside each cabinets for smooth functioning of railing. The Stainless Steel rods provided in the baskets shall be of combination of 5.5mm dia and 2.8mm dia rods and the spacing of these various steel rods in the baskets shall not be less than that of the samples\" baskets available with the Bank(Tenderers are advised to view the baskets available with the bank before quoting rate). All shelves shall be supported on approved quality Stainless Steel(SS) pins and shall be adjustable for various height requirements. The unit shall be firmly fixed to the walls/slabs/floor using non-corrossive metal screws of appropriate size and rawl plugs. All exposed surfaces and internal surfaces of the units shall havemachine pressed lamination having thickness 1mm and 0.8mm respectively of approved shade and make (Merino, Greenlam or approved equivalent) and pasted withsynthetic resin based adhesive (Fevicol, Vamicol or approved equivalent) etc. The thickness of four edge PVC lipping for shutters and drawer fascia shall be 2mm thick, thickness of edge lipping of carcass/ plywood partition should be 0.8mmand thickness of four edge lipping around the rebate of glass shutter shall be 0.6mm.The lippings/banding shall match with the external laminate shade. All faces and edges of Kadappahsupport slabs below the kitchen slab, wooden planks for supporting telescopic channel rails and wooden fillers shall be painted with a coat of synthetic enamel primer and two coats of white colour synthetic enamel paint. Payment shall be made on the basis of front elevation area of modular units only. It is clarified that sides, top and bottom surfaces will not be measured for payment. The wooden frame for shutter shall be made of minimum 70 mm wide marine plywood with lamination, wherever required. The telescopic channel shall be supported with 75 mm wide vertical and horizontal marine plywood members with laminate fixed on vertical Kadaph stone. If there is a need of erecting additional vertical marine plywood members with laminate on account of site conditions, the quoted rate shall have provision of carrying out these works. All necessary hardwares, wooden members with required thickness for fixing telescopic channel rails and filling the gaps shall be included in the quoted rate. The quoted rate shall include making of vertical partition below the existing kitchen slab with 16 mm thick marine plywood if necessary to accommodate modular kitchen units as per the requirement. |
| 224 | Supplying of pre-fabricated / factory made Over head kitchen cabinet units of 600 mm in high and 300 mm in depth as per the following specifications and enclosed sketch. The frame work or carcass of the cabinets, its sides/bottom, shelves etc. shall be made out of 16 mm thick Marine plywood (Century plywood, Kit Gold, Greenply, Western India Plywood, AEON or approved equivalent make). Glazed shutters ofcabinets as per the drawing shall be made out of 16 mm thick Marine plywood (Century plywood, Kit Gold, Greenply, WIP,AEON or approved equivalent make). Each shutter shall be fixed to the framework /carcass by using two numbers of best quality EURO type Slip/Auto Hinges (Ebco, Hettich, hafele or approved equivalent make) and provided with an approved quality and profile brush finished SS handle (minimum 150 mm long) of 304 grade. The glazed shutters shall have 5mm thick float glass fitted in 16 mm thick marine plywood frame alround with necessary cleats, clips and magnetic catchers. The will be one glass shelf of 10 mm thick edge polished float glass for horizontal partition in each cabinet.The thickness of four edge PVC lipping for shutters shall be 2mm thick, thickness of edge lipping of carcass/ plywoodpartition should be 0.8mmand thickness of four edge lipping around the rebate of glass shutter shall be 0.6mm.The lippings/banding shall match with the external laminate shade. All shelves shall be supported on approved quality SS pins and shall be adjustable for various height requirements. The over head cabinet carcass shall be fitted to the wall with PVC capped 2mm thick concealed MS hanging brackets each having width of 15mm and depth of 50mm @ 2 brackets for each cabinet which is fixed on wall with necessary screws. All exposed surfaces and internal surfaces of the units shall havemachine pressed lamination having thickness 1mm and 0.8mm respectively of approved shade(Merino, Greenlam or approved equivalent) and pasted withsynthetic resin based adhesive (Fevicol, Vamicol or approved equivalent) etc.Measurement will be taken on the basis of front length and height of overhead cabinet units. It is clarified that sides, top and bottom surfaces will not be measured for payment. All necessary hardwares, wooden members for filling the gaps etc shall be included in the quoted rate. Rate in words- 3 Supplying wooden shutters for the existing vertical storage space at the wall 3 top side in the kitchen with 6 shutters; eachwith two auto hinges and one brush finished SS handle ( minimum size 150 mm ) |
| 225 | Supplying wooden shutters for the existing vertical storage space at the wall 3 top side in the kitchen with 6 shutters; eachwith two auto hinges and one brush finished SS handle ( minimum size 150 mm ) and as per details below : Shutters as per the sketch shall be made out of 16 mm thick Marine plywood (Century plywood, Kit Gold, Greenply, WIP,AEON or approved equivalent make). Each shutter shall be fixed to the wooden framework by using two numbers of best quality EURO type Slip/Auto Hinges (Ebco, Hettich, hafele or approved equivalent make) and provided with an approved quality and profile brush finished SS handle (minimum 150 mm long) of 304 grade. The thickness of four edge PVC lipping for shutters and drawer fascia shall be 2mm thick with shade matching with the external laminate. All exposed surfaces and internal surfaces of the units shall havemachine pressed lamination having thickness 1mm and 0.8mm respectively of approved shade and make(Merino, Greenlam or approved equivalent) and pasted withsynthetic resin based adhesive (Fevicol, Vamicol or approved equivalent) etc. Measurement will be taken on the basis of front length and height of wooden shutters only. All necessary hardwares, wooden members filling the gaps shall be included in the quoted rate. |
| 226 | Installation, testing, comissioning of all above kitchen modular units at item nos 1, 2 & 3 above, along with all accessories, hardwares and fittings including additional / extra equipment and commissioning inclusive of all taxes, service tax etc. complete. The additional details are as under : Necessary openings/cuttings shall be made on the frame work/granite bozing and Kadappah shelves to insert or accommodate or fix modularunits and other accessories. The quoted rate shall include application charge of painting/polishing of all faces and edges of Kadappah support slabs below the kitchen slab, wooden planks for supporting telescopic channel rails and wooden fillers with one coat of synthetic enamel primer and two coats of synthetic enamel paint. Minor gaps/grooves if any, shall be filled with white cement paste and matching shade of skirting or floor tiles. The quoted rate shall include cost for filling the gaps between modular unit andsupporting vertical Kadappah slab with wooden members. Mode of Measurement – The total work in one kitchen of a flat will be treated as one job. |
| 227 | Providing and Fixing the Hanging rack type ( 6\"x 2\") made with 4/5 rows (@ 150mm. c/c) of 15/20mm.dia heavy duty Aluminium/ SS pipe and hang from ceiling with rope and pulley system as available in the market, may be provided in the balcony/ Toilet. |
| 228 | Modular FurniturewardrobeProviding, making & assembling Bedroom 1 Wardrobe 2000 x 600 x 2100 mm in heightas per architectural drawing and instructions. The system shallcomprise with following Ply Boxing - Providing, making and fixing 18mmthick commercial ply (IS 303) boxing (for Vertical & horizontal sides). Centrevertical portion shall be made of 2nos. 18mm thick sandwiched commercial ply (IS 303). 12mm commercial ply (IS 303) shall be fixed to the Wardrobe back work as per architectural drawing & instructions. Finished the wardrobe with 1mm thick approved white laminate (IS 2046-1969/1995)from inside and 1mm thick approved laminate (IS 2046-1969/1995) from out side at visible side and hidden surface shall be finished with french polish as per drawing. Wardrobe Shutters- Providing & making 4 nos. equal wardrobe shutters 2100 mm high made out 25mm thick block board (IS 1659:2004) hungto the ply boxing with heavy duty ss hinges of approved make. Shutter shall be finished with 1mm thick approved laminate (IS 2046-1969/1995) from out side and 1mm thick approved white laminate (IS 2046-1969/1995)from inside. 12mm thick teak wood beading for shutter finished with approved melamine polish matching to the laminate (IS 2046-1969/1995) as per drawings.Drawers -Providing & fixing 4 Nos 400 x 165 mm high Drawers to be made in 18 mm thick commercial ply (IS 303)front & side, back & bottom from 12 mm thick commercial ply (IS 303)drawer shall be finished with 1 mm thickapproved laminate (IS 2046-1969/1995) from out side and 1mm thick approved white laminate (IS 2046-1969/1995)from inside. Fixed the drawers to thewardrobe with telescope channels properly as per architectural drawings and as per specification and instruction. Rate also included providing, making & fixing 20mm thick fixed shelves ( 2 nos 850 x 600mm in size in size) made of 18mm commercial ply(IS 303) finished with approved 1mm thick white laminate (IS 2046-1969/1995) at all sides. Rate also included p/f 8mm thick modi or equivalent make approved mirror on shutter as per architectural drawing including necessary hardware of approved make, necessary beads, mouldings, 75 mm high skirting, lipping, providing & fixing 25mm dia. 850 mm long 2no. SS pipe for hanger of approved make, providing & fixing 8 nos ss hooks of approved make completed as specified.Hardware fittings & Fixtures--a) SS finished Heavy duty \"L\" Hinges (75 x 19 x 6mm in size)- 16 nos.b) Concealed Lock- 2 nos.c)150 mm long SS Tower Bolt- 2nose)Heavy duty magnetic catch- 4 Nosf) SS handle 300 mm long - 4 nosg) Drawer lock - 4 nosg) SS Hooks - 8Nos. |
| 229 | Modular FurniturewardrobeProviding, making & assembling Bedroom 2 Wardrobe 1800 x 600 x 2100 mm in heightas per architectural drawing and instructions. The system shallcomprise with following Ply Boxing - Providing, making and fixing 18mmthick commercial ply (IS 303) boxing (for Vertical & horizontal sides). Centrevertical portion shall be made of 2nos. 18mm thick sandwiched commercial ply (IS 303). 12mm commercial ply (IS 303) shall be fixed to the Wardrobe back work as per architectural drawing & instructions. Finished the wardrobe with 1mm thick approved white laminate (IS 2046-1969/1995)from inside and 1mm thick approved laminate (IS 2046-1969/1995) from out side at visible side and hidden surface shall be finished with french polish as per drawing. Wardrobe Shutters- Providing & making 4 nos. equal wardrobe shutters 2100 mm high made out 25mm thick block board (IS 1659:2004) hungto the ply boxing with heavy duty ss hinges of approved make. Shutter shall be finished with 1mm thick approved laminate (IS 2046-1969/1995) from out side and 1mm thick approved white laminate (IS 2046-1969/1995)from inside. 12mm thick teak wood beading for shutter finished with approved melamine polish matching to the laminate (IS 2046-1969/1995) as per drawings.Drawers -Providing & fixing 4 Nos 400 x 165 mm high Drawers to be made in 18 mm thick commercial ply (IS 303)front & side, back & bottom from 12 mm thick commercial ply (IS 303)drawer shall be finished with 1 mm thickapproved laminate (IS 2046-1969/1995) from out side and 1mm thick approved white laminate (IS 2046-1969/1995)from inside. Fixed the drawers to thewardrobe with telescope channels properly as per architectural drawings and as per specification and instruction. Rate also included providing, making & fixing 20mm thick fixed shelves ( 2 nos 850 x 600mm in size in size) made of 18mm commercial ply(IS 303) finished with approved 1mm thick white laminate (IS 2046-1969/1995) at all sides. Rate also included p/f 8mm thick modi or equivalent make approved mirror on shutter as per architectural drawing including necessary hardware of approved make, necessary beads, mouldings, 75 mm high skirting, lipping, providing & fixing 25mm dia. 850 mm long 2no. SS pipe for hanger of approved make, providing & fixing 8 nos ss hooks of approved make completed as specified.Hardware fittings & Fixtures--a) SS finished Heavy duty \"L\" Hinges (75 x 19 x 6mm in size)- 16 nos.b) Concealed Lock- 2 nos.c)150 mm long SS Tower Bolt- 2nose)Heavy duty magnetic catch- 4 Nosf) SS handle 300 mm long - 4 nosg) Drawer lock - 4 nosg) SS Hooks - 8Nos. |
| 230 | DOORS & WINDOWS :-Providing second class teak wooden frames of approved sizes for doors, windows, ventilators, clerestory windows and other frames, including fixing the frame in position by providing 40 x 5 mm flat iron hold fast lugs of 400 mm long and fixing the hold fast to the frames with 10 mm diameter bolts, nuts and wooden plugs and embedding embedding in cement concrete block 300x100x150 mm 1:3:6 mix or with dash fasteners of required dia & length or with suitable anchor fasteners of approved size and length, all moulding, rebating, jointing and finishing with 3 coats of French polish or one coat of primer and synthetic enamel paint in two coats, etc. complete as directed and specified by theconsultant |
| 231 | Providing and fixing 35 mm thick ISI marked flush door shutters of approved make conforming to IS : 2202 (Part I) with core of block board construction with frame of 1st class hard wood and well matched teak with decorative type 3 ply veneering with vertical grains or cross bands and face veneers on one side and non-decorative type 3 ply veneering with vertical grains or cross bands and face veneers on another side including fixing to the frames with required nos of stainless steelbutt hinges conforming with IS 12817 of size 125 x 64 x 2.50 mm with necessary SS screws andlipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters, etc. complete as directed by Consultant / NABARD. |
| 232 | Providing and fixing 30 mm thick ISI marked flush door shutters of approved make conforming to IS : 2202 (Part I) with core of block board construction with frame of 1st class hard wood and well matched teak with non- decorative type 3 ply veneering with vertical grains or cross bands and face veneers on both the faces of the shutter including fixing to the frames with required nos of stainless steelbutt hinges conforming with IS 12817 of size 125 x 64 x 2.50 mm with necessary SS screws andlipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters, etc. complete as directed by Consultant / NABARD. |
| 233 | Providing and applying white cement based putty of approved brand and manufacture of average thickness of 2 mm or more in two coats, over the door shutters and preparing the surface even and smooth complete including cleaning and preparing surface for painting, etc. to the satisfaction of theconsultant. |
| 234 | Painting with two coats of synthetic enamel paint of approved brand and manufacture of required colour to give an even shadeincluding one coat of approved primer, scaffolding, cleaning, preparing the surface for painting by approved means, applying additional coats wherever required to achieve even shade and colour, etc. complete as directed by theconsultant. |
| 235 | Providing and applying two or more coats of french spirit polishing of approved brand and manufacturer including a coat of wood filler inlcuding preparing the surface for painting by approved means, applying additional coats wherever required to achieve even shade and colour, etc. complete as directed by theconsultant. |
| 236 | Providing and fixing 125 mm long chromium plated brass handles for doors and windows and with necessary materials and fixtures like screws etc. and all labour etc. complete |
| 237 | Providing and fixing 300 mm long Stainless Steel aldrops set made of 16mm diameter bars for doors and windows and with necessary materials and fixtures like screws etc. and all labour etc. complete |
| 238 | Providing and fixing Stainless Steel hanging type door stopper set for doors with necessary materials and fixtures like screws etc. and all labour etc. complete |
| 239 | Providing and fixing 300 mm long Stainless Steel aldrops set made of 16mm diameter bars for doors and windows and with necessary materials and fixtures like screws etc. and all labour etc. complete |
| 240 | Providing and fixing 250 x 10 mm bright finished brass tower bolts (barrel type) for doors and windows and with necessary materials and fixtures like screws etc. and all labour etc. complete |
| 241 | Providing and fixing 100 x 10 mm bright finished brass tower bolts (barrel type) for doors and windows and with necessary materials and fixtures like screws etc. and all labour etc. complete |
| 242 | Providing and fixing Stainless Steel with chromium plated peep holes, manufactured as per IS, for doors with necessary materials and fixtures like screws etc. and all labour etc. complete |
| 243 | Providing and fixing type-2 (reversible latch) single side key operated rim locks along with the set of three keys manufactured as per best engineering practice of approved brands condorming to IS 9131 having 1 no. of deadbolt with double turn and 1 latch bolt for strong locking and safety locking/ unlocking from the inside with knob turn mechanism for main doors with necessary mounting accessories, materials and fixtures like screws etc. and all labour etc. complete |
| 244 | Providing and fixing Fiber Glass Reinforced plastic (FRP) DoorFrames of cross-section 90mm x 45mm having rebates of 32mm x15mm size to receive shutter of 30mm thickness. The laminate shallbe moulded with fire resistant grade unsaturated polyester resin andchopped mat. Door frame laminate shall be 2mm thick and shall befilled with suitable wooden block in the frame. The frame shall becovered with fiberglass from all sides. M.S. stay shall be provided atthe bottom to steady the frame etc. complete as directed. |
| 245 | Providing and fixing to frames 30 mm thick Fibre Glass Reinforced Plastic (FRP) panelled / extruded profiled door shutter of approved colour, brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS: 14856 - 2000 etc complete as directed. |
| 246 | Providing and fixing 25 mm dia chromium plated brass curtain rod having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., complete as directed and specified by theconsultant |
| 247 | Providing and fixing Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)works for frames and shutters of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, including fixing with dash fasteners of required dia and size, necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket, providing and fixing hinges/ pivots and fittings wherever required including the cost of required EPDM rubber / neoprene gasket, etc.The Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required inluding cleat angles, aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, etc. all complete as per architectural drawings and the directions ofconsultant. etc. (Glazing will be paid for separately) |
| 248 | Providing and fixing Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions ofconsultant . |
| 249 | Providing and fixing glazing with float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions ofconsultant . |
| 250 | Providing and fixing in position aluminum louvered window with anodised aluminum frame of approved make and of size 40mm x 20mm x 2.0mm (wt. 0.605 kg/Rm) including adjustable aluminum frame, 4 to 6mm thk. frosted glass, fixtures and fastenings etc. complete as directed by by Consultant / NABARD |
| 251 | Providing & fixing 20 mm thick machine cut mirror polish 1st quality Granite window sill (black galaxy or approved shade) including edge polishing, backing coat of 1:4 cement plaster / mortar/cement paste , cleaning etc. complete as per Architects details drawing and design. |
| 252 | PAINTINGWORK:-INTERNAL PAINT:Wall painting with two coats acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved make and colour at all location and heights, including one coat of approved primer, scaffolding, cleaning applying additional coats wherever required, to achieve even shade and colour, etc. complete as directed by theconsultant |
| 253 | ELECTRICAL WORK :-Wiringforlightpoint/fanpoint/ exhaust fan point/ call bell point with1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modularplate,suitableGIboxand earthingthepointwith1.5sq.mm FRLS PVC insulated copper conductorsinglecorecableetc.asrequired. a) Group C |
| 254 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor,singlecorecableinthe existing surface/ recessed steel/ PVC conduit as required:- a) 3 x 1.5 sq mm |
| 255 | b) 2 x 1.5 sq mm |
| 256 | c) 2 x 1.5 sq mm |
| 257 | d) 2 x 2.5 sq mm |
| 258 | e) 2 x 2.5 sq.mm |
| 259 | f) 2 x 4 sq mm |
| 260 | g) 2 x 4 sq mm |
| 261 | Supplyingandfixingoffollowing sizes of medium class PVC conduit along with accessories in surface/recessincludingcuttingthe wallandmakinggoodthesameincase of recessed conduit as required. a) 20mm |
| 262 | SupplyinganddrawingofUTP4 pair CAT 6 LAN Cable in the existingsurface/recessedSteel/ PVC conduit as required.:- a) 1 run of cable |
| 263 | Supplyingandfixingfollowing modularswitch/socketonthe existing modular plate & switch box including connections but excluding modular plate etc. as required. :- a) 5/6 A switch |
| 264 | b) 15/16 Amp Switch |
| 265 | c) 3 pin 5/6 A socket outlet |
| 266 | d) 6 Pin 15/16 Amp Socket |
| 267 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.:- a) 1 or 2 Module |
| 268 | b) 3 Module |
| 269 | c) 4 Module |
| 270 | d) 6 Module (200mmX75mm) |
| 271 | e) 8 Module (125mmX125mm) |
| 272 | f) 12 Module (200mmX150mm) |
| 273 | Supplying,installation,Testing& Commissioning of 30W Suspended/SurfaceMounted1x4ft LED Ceiling Light with White PowdercoatedCRCAHousing, lumenoutput notlessthan100 lm/watt,CCTnotlessthan5700K, CRI>80, PF>0.90 , & operating 230Volt 50Hz Power Supply i/c connectionwith3core1sqmm FRLS cu conductor etc complete asrequired. |
| 274 | Supply, Installation, Testing and Commissioningof1200mmsweep, BEE 5 star rated, ceiling fan with Brush LessDirect Current (BLDC)Motor, class of insulation: B, 3 nos. blades, 30 cmlongdownrod,2nos.canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value(CMM/W)minimum6.85,Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD lessthan10%,remoteorelectronic regulator unit for speed control and all remainingaccessoriesincludingsafety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase ACSupply,earthingetc.completeas required. |
| 275 | Supplying and fixing 63A 415 V \"C\" curve 10KA TPN MCB in Existing DBs complete with connections, testingandcommissioningetc.as required. |
| 276 | Dismantlingofelectricalmateriali.ewiring,switches,sockets, Boards, PVC casing MCB\"s & DB\"s, ceilingfans,fittingsetcincluding disconnection and stacking of material in suitable place as perdirection of Consultant / NABARD. |
| 277 | Buy back discount quoted for single 1 BHK Flats for dismantled existing M.S.Grills made up of angles, tees, flats, channels, doors, windows, granite, GI Pipes, wash basins, taps,fans, wires, guysers, etc. including all gusset plates, bolts, nuts, cutting rivets, welding, etc. These items has to be taken away from the site by the contractor at their own cost. |
| 278 | Buy back discount quoted for single 2 BHK Flats for dismantled existing M.S.Grills made up of angles, tees, flats, channels, doors, windows, granite, GI Pipes, wash basins, taps, fans, wires, guysers etc. including all gusset plates, bolts, nuts, cutting rivets, welding, etc. These items has to be taken away from the site by the contractor at their own cost. |
| 279 | Buy back discount quoted for common areas for dismantled existing M.S.Grills made up of angles, tees, flats, channels, doors, windows, granite, GI Pipes, wash basins, taps, etc. including all gusset plates, bolts, nuts, cutting rivets, welding, etc. These items has to be taken away from the site by the contractor at their own cost. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
