Construction of Remaining Work & Providing modular Furniture For Nagar Parishad Marathi School No.4 At Darwha Nagar Parishad In Tq. Darwha Dist. Yavatmal-1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Bd.A.1 Page Nos 259 SSR It. No. 21.02 Page. No. 153 2 Conveying of materials or Building rubbish obtained from excavated stuff/ dismantling of buildings up to lead of 5 km from the site..as directed by enginner in charge As directed by Engineer in charge Rate of Carting For Building Rubbish For 5 km Lead 3 Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. Lift unto 150 ml Ru Mechanical Meane Bd.A.2 Page Nos 259 SSR It. No. 21.06 Page. No. 153 4 Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. As directed by Engineer in charge. SSR It. No. 21.4 Page. No. 157 5 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Bd.A.11 Page Nos 263 SSR It. No. 21.37 Page. No. 157 6 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. Bd. E. 1 Page Nos 287 SSR It. No. 24.01 Page. No. 175 Providing and laying in situ /Ready Mix cement concrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand Bd.F.3 Page Nos 298 and B.7, Page Nos 38 SSR It. No. 25.11 Page. No. 178 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface roughening if special finish is to be provided and curing etc, complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. or Bd.F.5 Page Nos 300 and B.7, Page. Nos 38 SSR It. No. 25.31 Page. No. 179 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as including steel centering, formwork, cover directed blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine Bd.F.6 Page Nos 300 and B.7, Page Nos 38 SSR It. No. 25.5 Page. No. 181 Π 10 Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With Bd.F.9 Page Nos 303 and B.7, Page Nos 38 SSR It. No. 26.05 Page. No. 184 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. or Bd.F.8 Page Nos 302 and B.7, Page Nos 38 SSR It. No. 25.7 Page. No. 239 Providing and laying damp proof course 50 mm thick in M20 cement concrete layer and bitumen/ using cement with waterproofing compound curing, formwork etc. complete. Bd.J.2 Page Nos 355 SSR It. No. 31.01 Page. No. 205 Providing and fixing in position TMT FE500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and zumnorting as ranuirad comniato SSR It. No. 26.33 Page. No. 188 Providing second class Burnt Brick masonry with conventional/IS. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exnosed faces and watering etc Complete Bd.G. 1 Page Nos 313 SSR It. No. 27.01 Page. No. 197 Providing second class Burnt Brick masonry with conventional/LS. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Bd.G.5 Page Nos 315 SSR It. No. 27.05 Page. No. 197 - Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing ete. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be Bd.E. 3/Page Nos 288/I.S. 456 (2000) SSR It. No. 24.16 Page. No. 177 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Bd. L.2 Page Nos 368 SSR It. No. 32.04 Page. No. 229 Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffoldine and curing etc. complete. Bd.L.1 Page Nos 367 SSR It. No. 32.01 Page. No. 209 9 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days Bd.L.7 Page Nos 369 SSR IL. No. 32.11 Page. No. 209 20 Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, Alling ininte curing and clearing ete complete Bd.M. 12 Page Nos 385 SSR It. No. 33.4 Page. No. 217 21 Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to 15. 15622-2006 (group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing ate complate Bd.M. 12 Page Nos 385 SSR It. No. 33.41 Page. No. 217 22 Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. As directed by Engineer in charge. SSR It. No. 32.34 Page. No. 212 23 Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete Bd.P.6 Page Nos 414 SSR It. No. 36.12 Page. No. 227 Π 24 Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two davs ete, complete. etc
