Tender For Interior Furnishing Works At Sbi Hlst, Under Rbo3 Trivandrum (Proposed New Premises At Kazhakoottam ). LOW HEIGHT PARTITION::Providing and fixing of Low height partitions for Single window system of 1350 mm height/1500mm from finished floor level, as per the drawing. Aluminium sections of size 50 x 50 x 1 mm thick of INDAL/ JINDAL make as internal frame structure vertically at about 60 cm centres and 3 nos horizontally of the same size of frame at floor level, 750 mm and at 1350 mm level fixed in position. 8 mm plywood both sides of frame work finished with 1 mm laminate of approved color and shade with grooves on both sides upto 800 mm height. top of the partition finished with laminate of 1 mm thick. Clear float glass of 12 mm thickn ofapproved band with etching shall be fixed with SS D Brackets for a height of 500 mm above the solid partition. Partition on rear similar to side partition, but solid partition. One door shutter for each cabin for 680 mm width and 1350 mm height, similar to door shutter item, fitted with Godrej night latch at 500 mm from floor level, openable inside the cubicle shall be provided. PRICE BID FOR INTERIOR FURNISHING WORKS AT HLST (NEW PREMISES), RBO III TVM at KAZHAKOOTTAM. 1 19 Sq.M 4 BM Table, Officers table, Side tables etc - SHIFTING AND REUSING FROM RASMEC KAZHAKOOTTAM BRANCH - The rate includes cost of transportation, loading and unloading and fixing in position in the proposed branch in firs tfloor. Necessary repair works, if any, to be done while fixing the partitions in position, to be included in the rate. (shifting to HLST proposed premises in the opposite building, first floor). The rate includes repair/fixing laminate in the damaged areas of the table. 10 Nos 5 Low Level Storage : - SHIFTING AND REUSING FROM RASMEC KAZHAKOOTTAM(shifting to opposite building, first floor) - The rate includes cost of transportation, loading and unloading and fixing in position in the proposed branch. Necessary repair works, if any, to be done while fixing the partitions in position, to be included in the rate area. 5 Sq.M 6 Column Panelling:- Providing and fixing columns/ wall panelling to detail as shown in the drawing with 18 mm thick plywood finished with 1 mm thick laminate. 22 Sq.M 7 Providing and Fixing 100 mm wide Roller Blinds of Vista Levton or approved equivalent make and colour. 21 Sq.M 8 Painting the walls/ ceiling with two coats of plastic emulsion paint of approved make and shade including cleaning the surface. 56 Sq.M 9 Painting the walls/ ceiling with two coats of plastic emulsion paint of approved make and shade over a coat of putty including cleaning the surface. 98 Sq.M 10 Full height partly solid and partly Glazed partition :- Providing and fixing in position partly panelled and partly glazed partition as per specification in item no.(8) above but with 8 mm thick float glass with etching between 900 mm and 2100 mm level between the solid partition as per size required at site fixed with necessary SS D brackets. The edges of partition is to be finished with 1 mm thick laminate. Measurement for the partition area shall be consider from the floor level to false ceiling level only. 8.00 Sq.M 11 Partly solid and partly glazed door:- Providing and fixing door shutter using 35 mm thick solid block board finished with 1 mm thick laminate on both sides with grooves fixed with 8 mm glass 600 x900 mm fixed with beech wood beadings above 900 mm . Each door shutter to be provided with 4 nos. 150 mm SS hinges, a pair of 300 mm long SS handles, tower bolts, hydraulic door closer mortice lock etc of Dorma or equivalent make. 6.00 Sq.M 12 Fully glazed Door- Providing and fixing frameless fully glazed 12mm thk toughened glass door fixed with necessary patch fittings (Dorma or equivalent make) including cutting, making holes, cutouts in the glass of required shape and size to accommodate fittings and fixing the fittings in floors, soffits, jambs including necessary fixtures, screws, sealant wherever required and SS cover over patch fittings. Rate shall include necessary etching film / LOGO, approved patch fitting locking systems, 1 pair of 600mm long S. S. (H Shape) Handles of approved make, floor springs, and any necessary hardware items.( DORMA MAKE Top Pivot - PT 24, Top Patch Fittings - PT 20, Bottom Patch fittings - PT 10, Floor Spring - BTS 75 V, Corner lock with strike plate and Euro Profile Cylinder - US 10, Handle - TG DIH600 - 600mm length) Measurement will be taken only upto solid partition level above. 2.00 Sq.M 13 Providing and fixing of fixed glass partitions with 12mm thick toughened glass using PT Standard fittings like PT 90/PT 92 of Dorma or equivalent make at the top and bottom including cutting, making holes in glass and fixing the fittings in floors, ceilings etc and making the same good with necessary screws including etching as per approved patterns.
