Tender Documents For Furnishing And Electrical Works For New Premises At Anantnag; 1. FURNISHING WORKS 1(i) Providing & Fixing (false ceiling at 9-6 ht. (as per drg.)) of India Gypsum Ltd. using 12.5mm thick Gypsum board panels with metal frame work including all material & cost of tape, jointing compound, G.I. section etc. complete as per drg. & direction of the Architect/Engineer. 650 Sq.ft. 1(ii) Making Cove in Gyp false ceiling (1-6 width x Rft). PPGI METAL SHEET FALSE CEILING: Providing & fixing opposition false ceiling of Armstrong 600 x 600 mm PPGI metal microloop lay-in standard perforated plain tiles silhouette 15 mm made of 120 gsm pre-painted galvanized iron Grade 350 as per IS277 (2018) with coating durability as per IS 4246 color as approved by Bank/Architect with 15mm exposed grid system (Grid frames shall have black groove at bottom) by Armstrong Co. with suspenders. Making all necessary framework for A.C. ducting, if any, and necessary cutouts for diffusers and light fittings taping and finishing to proper line and level, including making grooves and trap doors for A.C unit. 2(i) TOUGHENED GLASS DOOR & PARTITION (for bank entry and Manager Cabin): Providing & fixing 12 MM thick toughened glass for door and fixed glazing, with complete patch fittings such as handles, lock and L-brackets etc. The job shall also include etching design. 250 Sq.ft. 2(ii) Floor spring for toughened glass doors. 3 Nos. 3(i) Providing and fixing wooden partition made of internal frame of alum sections of size 1.75x1.75 placed at 2-0 C/C vertically and at 1-0 horizontally. Finished with 9mm thick commercial ply on both sides with 1.00 mm thick laminate on all surfaces, with horizontal grooves. The partition shall have 5.00 mm x 12mm thick glass as mentioned in the drawings. The partitions are above 7-6 ht to 8-0 ht with beading 5x1/2. The rate of partition shall include 9mm thick commercial grade BWP ply, 1mm laminate on both sides and putty glass, but with complete hardware such as latch, latches, stoppers. The low ht. partition shall have MDF wood gobi of size 3 x 0.5 to 0.75 which shall be painted with enamel grade wood. 170 Sq.ft. 3(ii) Low height partitions with 12mm thick glass. 70 Sq.ft. 3(iii) Low height partitions with 12mm thick glass. 75 Sq.ft. 3(iv) Cash cabins pts (7-3 high). 90 Sq.ft. 3(v) P.T. door with cash cabins as well as single windows front ptn. with 12mm thick glass. 60 Sq.ft. 3(vi) Woodwork items for partition string room. 40 Sq.ft. 3(vii) Multi purpose Locks for storages, drawers, etc.. 5 Nos. 3(viii) Door Closers (with handles). 5 Nos. 3(ix) Floor Springs. 5 Nos. 3(x) Knight Latches. 1 No. 4(i) P/F wall paneling on alum section frame 1 x 2 placed @ 2-0 vertical & 1-0 C/C both ways. And to be in a width panel or distributed visually. Panels to be fixed on the frame with 9mm thick commercial ply, 1mm thick laminate, with water solvent based sealant (Black color), ACP thickness of 3mm minimum, Aluminium foil thickness to be min 0.20 mm on both sides Alcopan, APEX, Alubond, Alcosun, prime bond, or equivalent ISO certified brands. 720 Sq.ft. 5(ii) Pin-up board finished with cotton cloth & rubber wood beading. 40 Sq.ft. 6 Banking counters with 1.25 thick post-form factory made tops. 8 Rft. 7 Side rack with 1.25 thick post-form factory made top. 12 Rft. 8 Cash counters with 1.25 thick post-form factory made tops. 4.5 Rft. 9 Storage cabinets with 1.25 thick post-form factory made tops. 250 Sq.ft. 10 Managers table with 1.25 thick post-form factory made tops. 6 Rft. 11 P/f writing notes board of size 2x6x4-0 finished with ivory colour 1mm th. laminate, 3/8x1 th. polished teak wood beading on all sides. 1 No. 12 MDF Jaali (for A.C.): Providing & fixing MDF Jaali in front of A.C. units with 12mm thick MDF. Back side of this Jaali will have milky white acrylic sheet with yellow light inside and tube lights. 20 Sq.ft. 13 Wall paper: Providing and laying wall paper as per sample. 40 Sq.ft. 14 LOGO: Providing & fixing to make shape and size (as per the design provided) and fixing in position UBI logo made of acrylic sheet of bank color (pre approved) with LED lights inside fixed in position, nutts bolts & all other items etc.. 6 Nos. 15 Small logos of acrylic/plastic/tape on each counter. 10 Nos. 16 Providing & fixing soft boards of size 1-6x2-0 (covered with openable glass shutters) with 10mm th. comm. ply on front with both side finished with cotton fabric, 1x1 rubber wood beading. 1 No. 17 Decorative drop box: Providing and fixing a decorative drop box and complaint box of size 18x 27 laminated with 1mm th laminate internally & externally. 2 Nos. 18 Dressing table: Providing & supply dressing table for locker room of size 1x0x5-0 including sink. 1 No. 19 Panelling, partitions & rolling shutter box: Panelling, partitions and rolling shutter box (for A.C. & AC). 280 Sq.ft. Subt otal Furnishing Works 2. ELECTRICAL WORKS 1(i) Providing & Fixing 2x2 recessed or panel model mounted LED Lights 36-40 W of Philips / Havels / Crompton /CDG /Orient or equivalent of similar made. 30 Nos. 1(ii) Providing & Fixing 15 W LED ROUND DOWNLIGHTER. 30 Nos. 1(iii) Providing & fixing LED tube lights 1x20W of Philips / Crompton / Havels / Cadds or equivalent. 12 Nos. 2(i) Providing & Fixing metallic round body wall fans: Khaitan / Crompton Greaves / Orient or equivalent of similar made. 12 Nos. 2(ii) Ceiling fans 1400 rpm. 1 No. 2(iii) Heavy duty Crompton Greaves / Philips / Havels or equivalent. 12 Nos. 3(i) P/F LED strip lights. 70 Rft. 3(ii) P/f spot light. 30 Nos. 4(i) Air conditioning wiring: Supply & laying of Eletrical flexible cable of 2.5 sq mm multi strand for A.C unit. 6 Nos. 4(ii) A/C wiring from AC D/B to indoor unit with 2.5 sq mm. 7 Nos. 4(iii) P/F E/M/S/Clads for A.C.. 7 Nos. 4(iv) 15 Amp wiring with 2.5 sq.mm. multi strand PVC copper wire. 10 Nos. 5(i) 5 Amp plug point wiring with 1.5mm sq. multi stand PVC copper wire inc. Plate switches, sockets, plugs, etc.. 10 No 5(ii) Call-bell point wiring including call-bell. 10 No 5(iii) Electrical lights, wall fan points with 3-pin socket and switch, light & exhaust fan point wiring with 1.5mm sq. from D/B to switches, a fitting multi strand PVC copper wire including plate switches, sockets, etc.. 50 No 5(iv) Signage wiring. 2 No 6(i) Copper plate earthing: Supply, fixing and termination of copper plate of size 600x600x3mm thick with 8 S.W.G. Copper wire, all accessories such as watering pipe & funnel and providing masonry enclosure at top with cover plate. 1 Set 6(ii) G.I. plate earthing: Supply, fixing and termination of G.I. plate of size 600x600x3mm thick with all accessories. 2 Set 7 P/f wiring of PVC conduit in wall floor. 8 Nos. 8(i) P/f wiring laying and commissioning CAT-VI/ Lucent / D-line computer networking cable. 23 Rft. 8(ii) Supply of patch cords for computers. 40 Nos. 9(i) 10-way SP MCBDB. 1 No. 9(ii) 8-way SP MCBDB. 1 No. 9(iii) 4-way TPN MCBDB. 1 No. 9(iv) 6-way TPN MCBDB. 1 No. 9(v) 4-way F/F box with 32 amp DPs. 2 Nos. 9(vi) TPN changeover switch. 1 Job 9(vii) P/f sub distribution board. 12 Sq.ft. 10(i) 3.5x16 sq.mm. Aluminum conductor. 30 per mtr. 10(ii) 3.5x16 sq.mm. Copper conductor. 20 per mtr. 11(i) 6.0 sq.mm. Aluminum conductor. 6 Per mtr. 11(ii) 6.0 sq.mm. Copper conductor. 20 Mtrs 11(iii) P/f & laying 4.0 sq.mm. Copper conductor. 10 each 11(iv ) 3.5x16 sq.mm. Aluminum conductor. 10 each 11(v) 4.0 sq.mm. Copper conductor. 14 each 12 P/f & laying 4.0 sq.mm. PVC insulated wire. 32 Sq.ft. 13 Making double-door wooden laminated electrical almirah. 2 Nos. 14 Connectivity for the VSAT. 2 No 15(i) Networking switches with patch panels & racks. 10 No. 15(ii) P/F lan/computer networking data cable. 300 Rft. 16 Amplifier, USB, Blue-tooth. 1 Set 17 End terminations with brass compression glands. 4 each .... more in document
