Tender For Work Of External Electrification Of Newly Created Plots Of Khasra No. 96 And 97 Of Village Noornagar In Nandgram Yojana. - Supply of STP 9m IS:410 SP-33botom galvenised complete in all respect. 2 Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required. Above 8.0 meter and upto 10.0meter.[7077*0.789=6451.65*(111/110)=5634.51] 3 S/Erection of D clamps of 50 mm x 6mm flat iron on steel tubular poles/steel rail poles with bolts, nuts etc. complete in all respect including painting with aluminium paint complete in all respect as per direction of E/I. 4 Supply&Erection of Suspension/J type clamps of on steel tubular poles/steel rail/PCC poles with bolts, nuts etc. complete in all respect including painting with aluminium paint as per direction of engineer in charge. 5 S/Erection of PRC Connector for ABC bunch conductor Cable etc complete in all respectas per direction of E/I. 6 S/Fixing of Dead End Clamps required with nuts and bolts complete in all respect as per direction of E/I. 7 Supply & Erection of (3x120+1x95+1x16) Sqmm Arial Bunched conductor of on steel tubular poles/steel rail/PCC poles with bolts, nuts etc. complete in all respect as per direction of E/L 8 S/Fixing of 8 way Distribution box for service connection complete in all respect. As per UPPCL Rate 9 Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle (20 mm X 60 cm), 7/4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.[5600*0.789=4418.4*(111/110)=4458.56] 10 UNDERGROUND CABLE Supply of 3 core standered aluminium conductor XLPE insulated cable 3 X 185 sq.mm 11KV grade. 11 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. (Above 120 sq. mm and upto 400 sq. mm ) [577*0.789=455.253*(111/110)=459.39] 12 Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 kV grade as required. [22795*0.789=17985.25*(111/110)=18148.75] 13 Supplying and fixing of light class G.I. pipe of 100 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required.[4907*0.789=3871.62*(111/110)=3906.81] 14 Trenchless boring with HDPE Pipe by Machine Technology including Labour, T&P, cost of Pipe and all required meterial suitable for laying of LT 300 Sqmm to 400 sqmm & 11KV HT cable 120 Sqmm to 400 Sqmm and 33KV HT cable upto 120 Sqmım size with proper completion of work as per direction of E/I. 15 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 200 mm Dia. (OD-200mm & ID-175 mm nomial) [668*0.789=527.05*(111/110)=531.84] 16 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 240 sq.mm 3-1/2 core 17 400 sq.mm 3-1/2 core 18 Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge .240 sq.mm 19 400 sq.mm 20 11 KV SUBSTATIONSupply, Installation, Testing & Commissioning of 11/0.433 KV. 50Hz, 3 Phase 400 KVA copper wound outdoor type oil filled air cooled DYN-11 Vector group Transformer complete as per UPPCL Approved make & Specifications with all accessories such as Breather Temp meter Bucholz relay in all respect. as per direction of engineer in charge. 21 Supply and fixing of 2 metres high cage fabricated with3mm thick expanded metal fixed on 50mm x 50mm x6mm angle iron frame having vertical members spaced at1 to 1.25 mts and horizontal members spaced at 1 mt. Thevertical members shall be grouted in floor and horizontalmembers in the wall to a depth of 300mm with endsforked.The cage shall have 2000mm x 1000mm size one leafdoor with locking device having door frame fabricatedwith 35mm x 35mm x 6mm angle iron and 3mm expanded metal duly fixed with the cage member withhinges etc. The cage shall be painted with red oxideprimer and synthetic enamel paint. The job includes allmaterials, labour, T&P etc. for proper completion ofwork. 22 Supply and construction of 1.5 X 1.5 X 1.3 Mt. Over all size Transformer plingth suitable for 250-630 KVA including 1.5 Mt. 100x50 mm 2 Nos. Channel piece, excavation back filling, 1.5 X 1.5 X 0.1 Mt. C.C., brick work including plasster complete in all respect. 23 S/Fixing of Feeder Pillar Box size 1.45x0.9x0.45 Mt. made of 16 SWG CRCA Sheet with fabrication duly painted enamel paint, double door double locking arrangement including four teless unit having capacity 500 Amp incoming and 3 nos. 300 Amp outgoing with required fuses and 80x6 mm Cu Busbar in phase and 60x6 mm busbar in neutral complete in all respect as per direction of E/I. 24 S/Construction of Feeder Piller box plinth for size 0.9 x 0.45 x 145 Mt. including earth work, brick work with plaster complete in all respect as per direction of E/I. 25 Earthing with G.I. earth plate 600mm X 600mm X 6mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. [7472*0.789=5895.408*(111/110)=5949] 26 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.[244*0.789=192.51*(111/110)=194.26 27 HT OVERHEAD LINE Supply of STP 11M IS:410 SP-55botom galvenised complete in all respect. 28 Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required. Above 10.00 meter and upto 12.00 meter[8177*0.789=6451.65*(111/110)=6510.30] 29 Supplying of 50 mm X 8 mm M.S. flat iron pole top bracket/ cross arm for single 11/22/33 KV over head line conductor complete with fixing clamps, bolts, nuts and washers drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required.[615*0.789=485.23*(111/110)=489.64] 30 Supplying of channel iron 75mm X 40mm X 6mm ( 7.14 kg per metre) cross arm for two 11 KV over head line conductors complete with 50mm X 50mm X 6mm angle iron bracket welded to the channel iron and complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required.[2334*0.789=1841.52*(111/110)=1858.26] 31 Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle (20 mm X 600 mm), 7/4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1) cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. [5455*0.789=4303.99*(111/110)=4343.12] 32 Providing & Fixing of Jumpring for 11 KV Transformer & 11 KV Double pole complete in all respect, as per direction by E/I. 33 X/Fixing of 11 KV TPMO complete in all respect, as per direction by E/I. 34 S/Fixing of 11 KV Fuse sets (drop out) with clamps complete in all respect as per direction by E/I. 35 Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc, as required. [2628*0.789=2073.49*(111/110)=2092.34] 36 Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required. [312*0.789=246.16*(111/110)=248.40] 37 Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required. [978*0.789=771.64*(111/110)=778.65] 38 Supply & erection of overhead line with ACSR conductor (Dog conductor) on poles / service bracket including binding etc. complete in all respects. 39 Supply & erection of overhead line with G.I. wire no. 8 to 4 SWG on poles/serivce bracket including binding etc. complete in all respect. 40 Dismantling of over head lines comprising of copper/ aluminium over head conductor, G.I. wire, cross arms, insulators etc. as required.[87*0.789=68.64*(111/110)=69.27] 41 Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.[2662*0.789=2100.318*(111/110)=2119.41] 42 S/F of 2.54 mtr long 20 mm dia MS Earth Rod with 6 SWG GI earth wire, nut, bolt & washer etc. complete in all respect. 43 Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect. 44 Supply & fixing of anticlimbing device fabricated from G.I.(flat) of 25 mm x 6mm size in a shape of ring of the pole size, having G.I. flat pointed fins of length 225 mm in 8 nos. including all the materials, labour, T&P and other material required for proper completion for work and to the satisfaction of Engineer-in-Charge. 45 Supply and fixing danger board fabricated from 10 gauge M.S. Sheet as per I.E. Rules. 46 Supply & erection of hexagonal / cradle type gaused of G.I. wire no. 8 to 4 SWG including binding etc. complete in all respect. 47 Supply and fixing of 2.24m M.S, channel made of 75 X 40 mm with clamps,nuts,bolts,primer and paint overred oxide complete as per direction of engineer in charge. 48 STREET LIGHT WORK Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect. CAT-AAA 49 Supply and fixing of 40 mm diametre 1.20 mtr long GI pipe (class-B) bracket for street light fitting.complete in all respect as per direction of engineer in charge. 50 Supply and fixing 40 A TPN capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 51 S/L of 10 Sqmm x 2 core Unarmoured LT 1100 Volt Aluminium Conductor twin flate cable Complete.
