Tender For Repair/Maintenance To E/M Installations Under Aor Of Age B/R-Ii Of Ge (N) Patiala; 1 Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified. 2 Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqmincl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified. 3 S&F factory made Flush shutters 30mm solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. 4 S&F factory made 2nd class hard wood factory made plain framed panelled door shutters 35mm thick (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both sides. The size of rail and stiles as per IS:1003 (Part I), Klin seasoned and chemically pressure treated complete all as specified and directed. 5 S&F mild steel angle iron work as in doors frames complete all as specified and directed. 6 S&F factory made solid PVC door, cup board shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded both side prelaminated PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & prelaminated PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail, lock rail & bottom rail panelling of prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specification & diagram/product drawing shown inf SSR complete all as specified and directed. 7 S&F solid PVC door, cup boardframe size 50mmx47mm made out of 5mm Prelaminated PVC sheetreinforced with MS square tube all as per specification and as per drawing shown in SSR complete all as specified and directed. 8 S&F butt hinges medium weight cold rolled mild steel 100mm long complete all as specified and directed. 9 M&L for 150mm long extructed aluminium handle fabricated type complete all as specified and directed. 10 S&F Aluminium anodised barrel tower bolt of extruded section 150 mm sizecomplete all as specified and directed. 11 S&F aluminium alloy anodised sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed. 12 Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed. 13 Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams, roof slab and similar RCC work at any position / height (single storey/ double storey/ tripple storey and over head tank) by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports and form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes, including scaffolding upto tripple storey, complete all as specified and directed.Note : (i) Contractor shall take all necessary safety precautions alongwith insurance cover to his workmen before commencement of work. Unit rates quoted shall deemed to be inclusive of all such factors and nothing extra including compensation to workmen in any manner is payable on this account.(ii) Rate of scaffolding is deemed to be included in quoted rate. 14 M&L for Rendering 15 mm thick in cement mortar 1:4 , mixed with water proofing compound, on brick or concrete surfaces, trowelled to even and fair finish without using extra cement (WPC to be measured separately) complete all as specified. 15 Supply only liquid Water proofing compound complete. 16 M&L for Rendering 15 mm thick in cement mortar 1:6, on brick or concrete surfaces, trowelled to even and fair finish without using extra cement complete all as specified. 17 M&L for Rendering 5 mm thick in cement mortar 1:3 as on concrete surfaces in ceiling finished even and smooth without using extra cement all as specified. 18 M&L for prepartion of new plastered surfaces of wallsand applying two coat of cement based paint on external walls complete all as specified and directed. 19 M&L for preparation of new plastered surfaces of walls and applying two coat of oil bound distemper including applying 0.5 to 1 mm thick white wall care putty (in 1/2 coats as required) complete all as specified and directed. 20 M&L for preparation of new plastered surfaces on walls and applying three coat of white wash complete all as specified and directed. 21 M&L for preparationof new plastered surfaces of ceiling andapplying three coat of white wash complete all as specified 22 M&L for preparation of old treated surface of walls (plastered/unplastered ) including cornices, Pilastersetc by brooming down or steel wire brushing,scrapingdown smoke , soot moulds , moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash, leaving premises clean and tidy complete all as specified and directed by the Engineer-in Charge. 23 All as per item No 22 above but one coat of white wash on ceilings complete all as specified and directed by the Engineer-in Charge. 24 All as per item No 22 above but one coat of oil bound distemper on walls complete all as specified and directed by the Engineer-in Charge. 25 All as per item No 22 above but one coat of cement based paint on walls complete all as specified and directed by the Engineer-in Charge. 26 Allas per item no 22 but two coat of Exterior emulsion paint complete all as specified and directed by the Engineer-in Charge. 27 M&L for preparation of old treatedexposedsurface of Over Head Tankincluding Columns/ Beams/DOM structure and walls of OHT and Applying 2 Coats of Cement Base Painton palstered and RCC surfaces also applying two coats of Synthetic Enamel paint on steel surfaces and pipes . The height of OHT is upto 21 Mtr. The location of OHT is near swimming pool/ Hanuman Mandir /Old Cantt (TW-1,/TW-2/TW-3) .Note: 1. Contractor shall take all necessary safety precautions alongwith insurance cover to his workmen before commencement of work. Unit rates quoted shall deemed to be inclusive of all such factors and nothing extra including compensation to workmen in any manner is payable on this account.2. The quoted Rate shall be deemed including all saftey measures and scaffolding, trestle, ladders, cradles etc for execution of work up to complete height of the over head tank. 28 M&L for preparation of old treatedexposedsurface of Over Head Tankincluding Columns/ Beams/DOM structure and walls of OHT and Applying 2 Coats of Cement Base Painton palstered and RCC surfaces also applying two coats of Synthetic Enamel paint on steel surfaces and pipes . The height of OHT is upto 21 Mtr. The location of OHT is near shopping complex/behind MES IB /Firing Node near subway/ at GSE (TW-6,/TW-12/TW-18/TW-22) .Note: 1. Contractor shall take all necessary safety precautions alongwith insurance cover to his workmen before commencement of work. Unit rates quoted shall deemed to be inclusive of all such factors and nothing extra including compensation to workmen in any manner is payable on this account.2. The quoted Rate shall be deemed including all saftey measures and scaffolding, trestle, ladders, cradles etc for execution of work up to complete height of the over head tank. 29 Preparation of old steel and iron surfaces of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 30 M&L for preparation of old painted wooden surface of any description in any position and location not otherwise described over 10 cms width or girth andapplying one coat of synthetic enamel paint complete all as specified and as directed by the Engr-in-Charge . 31 Dismantling wrought iron or mild steel work of any description not otherwise provided for purlins, runners etc complete all as specified and directed by the Engineer-in Charge. 32 Demolition of brick work built in cement mortar complete all as specified and directed by the Engineer-in Charge. 33 Dismantling Asbestos Cement (corrugated, semi-corrugated,etc.) sheet in roof coverings complete.Note : The rates includes rates of scaffolding to work at a height of 10-15m hangars. Contractor shall take all necessary safety precautions alongwith insurance cover to his workmen before commencement of work. Unit rates quoted shall deemed to be inclusive of all such factors and nothing extra including compensation to workmen in any manner is payable on this account. 34 S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mmthick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws,complete, all as sepcified and directed.Note : The rates includes rates of scaffolding to work at a height of 10-15m hangars. Contractor shall take all necessary safety precautions alongwith insurance cover to his workmen before commencement of work. Unit rates quoted shall deemed to be inclusive of all such factors and nothing extra including compensation to workmen in any manner is payable on this account. 35 Excavating in post holes (or similar holes) as in soft/loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed by the Engineer-in Charge. 36 S&F steel work in square pipe/tubular/angle as in post, rafter, purlins, including special shaped washer etc, complete using ERW or induction butt welded tubes including distances pieces, base plates, nut bolts etc including complete all as specified and directed. 37 M & L for cement concrete 1:3:6 type C2 using (40mm graded stone aggregate) as in foundation filling mass concrete complete all as specified 38 M&L Brick work with sub class B bricks straight or curved on plan exceeding 6m mean radius bulit in C:M 1:6 complete all as specified and directed by the Engineer-in Charge. 39 Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled forfixing of steel sheeting or other covering. Doors, etc. to beprepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing of Fe-290 (Gde E165 complete 40 Hackingoutoldbrokenglass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads 41 M&L for Sheet glas 4mm thick ordinary quality and glazing with oil putty in square n exc 0.5sq. m in each pane 42 Dismantling of Barbed wire fencing of any description and in any position complete. 43 Dismantling posts or struts (wood, steel or RCC)any section incl taking out embedded portion and making good disturbed ground (post embedded in PCC) 44 S&F mild steel posts and struts in fencing including cuttingtops to shape as directed, drillingholes, notching for wire etc; flat iron fillets (for securing wire mesh/welded steel wire fabric etc) including all necessarydrilling, bolting or rivetingetc, andsimilar work conforming to Fe-290 Gde E-165 45 Supply only chainlink fencing any size any type etc complete all as specified and directed. 46 Fixing only chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire. complete all as specified and directed. 47 Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed 48 M&L for providing and Laying Premium (1st) quality straight edge, ceramic tiles WA value between 3% to 6% , flexural strength greater than 22N/mm², scratch resistance on mohs scale greater than 4 and crazing resistance of 2 cycles in area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floor,8 to 10 mm thick in floors etc. in any shade and design/pattern of light & dark tiles etc as approved matching with wall tiles, set & jointed in neat cement slurry & pointed in matching colored polymer cement based grout to match including 15mm thick screed bed of CM 1:4 complete all as specified and directed by Engr-in-Charge. 49 M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.Note : Dado should be flushed with the wall plastering. 50 M&L for anti-skid ceramic joint free premium quality coloured tiles 400 X 400 mm and 6-7 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 15 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified. 51 Demolition of cement concrete of any description and in any position not otherwise specially provided for 52 M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in hard standing finished even and smooth without using extra cement complete all as specified and directed. 53 M&L for 25mm thick cement cocnrete type B- 0 1:2:4 (12.5mm graded agg ) as in levelling coarse on hard standing surface complete all as specified and directed 54 M&L machine cut Kota stone slab 18 to 20 mm thick as in flooring or trades of step incl half round moulding over and including screed bed 15 mm thick in CM (1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and mirror polishing complete all as specified. 55 M&L machine cut Kota stone slab 18 to 20 mm thick as in riser to step including 10 mm thick rendringin CM (1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and mirror polishing complete all as specified. 56 M&L for 75mm thick PCC (1:5:10) type e-2 using 40mm graded stone aggregate as in Sub base finished even and rough complete all as specified and directed. 57 M&L for rubber mouldedcoloured chequered tiles 30cm x 30cm x 22mm thick with grey cement and pigment, set jointed and pointed in neat cement slurry as in floor including 15 mm thick screed bed in 1:4 complete all as specified and directed. 58 Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand all as specified and directed 59 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required all as specified and directed 60 ML for 14- 16 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed 61 S & F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed 62 S & F in repairsMild steel, plain, black sheet 1.60mm thick as in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required all as specified. 63 Demolition of reinforced Concreteof any description andin anypositionnot otherwise specifically provided for all as specified and directed 64 M&L for providing factory made precast reinforced cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in landings, perforated cover slabs(for manholes etc.,) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 all as specified and directed
