|
| 1 | Tighting of ACSR conducter complete in all respect. |
| 2 | Tighting of GI Wire complete in all respect. |
| 3 | Supply and erection of stay set at 3.5 Metres away from the pole complete with galvanised 19 mm dia × 1.80 Metre long stay rod, 30 cm × 30 × 6.3 mm anchor plat, thimble stay clamps, stay insulator, 19 mm 600 mm double screw tightener, 7/3.5 mm G.I. stay wire etc. in 1:3:6 cement concrete in all respects. |
| 4 | Painting of the electric pole with 2 coats of aluminum paint over red oxide primer complete in all respects. |
| 5 | Supply and burying of 40safe earthing electrodT-19 (Hot dip galvenised),Length up to 2000 mm,outer pipe 50 mm ,inner pipe 25 mm , terminal dia 12 mm outer GI pipeof 16 swg and inner GI pipe of 12 swg with hot dip galvanization up to 100 micron filled with crystline conductive mixture (CCM) having anti corrosive and conductive properties with 50 Kg s activated soil (BFC) caple of reducing the soil resistivity with good mixture of retaining capacityalong with 30 cm square CI frame with hinged cover and massonaries housing (from electrode terminal to switch board , cost of 25x3 mm GI stripe will be extra) |
| 6 | Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site |
| 7 | Supply & erection of hexagonal / cradle type gaused of G.I.wire no. 8 to 4 SWG including binding etc/.Supply and Fixing 5 Lines L. T. L.ne polypropylene composite phase spacer (Moulded or Bolted Type). complete in all respect. |
| 8 | Supply and laying of aluminium conductor PVC insulated armoured served, sheathed cable 1100 volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick stand alround and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Inchange, complete in all respect. The armoring of the cable shall be properly connected with the earthy conductor by clamps etc. 16 sq. mm. 2 core cable. |
| 9 | Supply and laying of aluminium conductor PVC insulated armoured served, sheathed cable 1100 volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick stand alround and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Inchange, complete in all respect. The armoring of the cable shall be properly connected with the earthy conductor by clamps etc.95 sq. mm. 3.5 core cable. |
| 10 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser/Reflector with driver set suitable for 110 to 130 watt confirming to IP66 Protection Having company LOGO Engraved complete in all respect.including laber.12100-13000 system limens highpower LED with.lenses,>110lm/W,PF>0.95,THD<10% at full load CRI>70,Potted driver set (not circultory),Phase to phase protection at 440V&>300V auto cut and restart feature,with five year Warrantee.Cat AAA. |
| 11 | S&F of 200 Amp. four pole change over switch on 50mm x 50mm x 6mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge. |
| 12 | GI pipe 100 mm diaDSR (E/M) 2022 |
| 13 | S&F of 100 Amp.415v metal clad TPN HRC typeswitch fuse unit complete with HRC fuseonangle iron framecomplete in all respects |
| 14 | Supply and fixing of 16M high mast pole of approved makewith rising system hot dip galvanised inside & out sidehaving pole sheet thickness 4mm top dia minimum 150 mm, bottom dia minimum 380mm, base plate 32mm thick, suitable for wind velocity as per IS 875part 3 and having no cercumferential weld with aaccessories for high mast such as head frame suitable for 6 luminaries and its controll gear boxes, 1.5HP Power tool motor, 3 point suspension with steel wire rope 6mm dia double drum winch including making suitable foundation as per manufacture drawing and site requirment along with foundation bolts, nuts, washers, anchor plates etc complete in all respect as per direction and satisfaction to the engineer incharge. |
| 15 | Supply & fixing of factory wired integral LED fiood light luminaires with die cast Aluminium housing built with driver set suitable for 170 to 200 watt. Confiming to IP 66 Protection complete in all respects. lavaur 18700-22000 system lumens high powar LED with lenses >110m/w,PF>0.95THD<10% at Full load CRI>70,Pottde driver set (Not circuitory) Phase to Phase Protection at 440v&>300v auto cut and restart Feature with 5 years warrantee. CAT-AAA |
| 16 | Supply and laying of 25 mm x 3 mm G.I. strip from earth electrode directly in the ground as required complete in all respects. |
| 17 | Supply and fixing of 25 Amp. TPN of automatic street light cubicle control panel paintedwith anty corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case TPN, complete in all respect. |
| 18 | GI pipe 80 mm dia( Mideum Class) DSR (E/M) 2022 |
| 19 | Supply and fixing of single unit LED aviation obstruction light complete with transfarmer and LED spiral etc,complete in all respect. |
| 20 | Supply and laying of aluminium conductor PVC insulated armoured served, sheathed cable 1100 volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick stand alround and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Inchange, complete in all respect. The armoring of the cable shall be properly connected with the earthy conductor by clamps etc. 16 sq. mm. 4 core cable.501i |
| 21 | Supply andfixing of brass nickel plated compression gland for PVC insulated and armoredserved sheathed under ground cable i/c rubber ring etc. Complete in all respects. The armoring of the cable shall be properly connected with the earth as per direction of E/ I. 16 Sq mm 4 Core |
| 22 | Supply and fixing of palm or pin type copper tin plated cable socket (lug) to the cable leads insulated with tap and making connection etc. complete in all respect as per directionof E / I.16 Sq mm |
| 23 | SITC of 15 HP Pumping plant including starter, control Panal, Cable, complete in all respect with all required material T&P labour etc |
