Tender For Beautification Work Of Cremation Ground In Ward No. 01 (Holi Chowk) Dhakiya Jat Of Nagar Panchayat Dhakiya - Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in charge. All kinds of soil DSR Item No-2.6.1 Rs (177.50*0.749) 2 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources.DRS Item no -(4.1.10) Rate(6518.60*0.749) 3 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth: Cement mortar 1:4 (1 cement : 4 coarse sand) DSR ITEM No-6.1.1( Rate =7370.65*0.749) 4 Brick work with common burnt clay modular bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand).Dsr 6.27.2 Above plinth level upto floor V level (Rs=8312.90x0.749) 5 Centering and shuttering including strutting,propping etc. and removalof form for, Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc.DSR Item No-5.9.2 (Rs=842.50x0.749) 6 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing an reinforcement - Allwork up to plinth level :cement concrete 1:1.5:3(1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources.DRS Item No -5.1.2 (Rate=9045.75*0.749) 7 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.(Thermo-Mechanically Treated bars of grade Fe-500D or more) .DSR Item No-5.22.6 (Rate=107.10*0.749) 8 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.DSR Item No-2.25(a)( Rate=700.50*0.749) 9 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) DSR Item No-13.4.1(Rate=357.35*0.749) 10 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.DSR Item No -13.80 (Rate =156.05*0.749) 11 Finishing walls with Acrylic Smooth exterior paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) DSR Item No-13.46.1 (Rate=160.60*0.749) 12 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources.DRS Item no -(4.1.10) Rate(6518.60*0.749) 13 Providing & Laying 2.5CM THICK C.C flooring S.I No-601(a) 14 S/F rolling shutters of aproved make made of 80x125 mm (3x18 gauge) cold rolled MS lath Interlocked through their entire length together designed pipe shafts with brackets, sideguids etc. including cost of Shutter,27.5Cm long wire spring,top cover & ball bearing etc. complete. SI. No. 520, 521, 522, 523 15 S/F rolling shutters of aproved make made of 80x125 mm (3x18 gauge) cold rolled MS lath Interlocked through their entire length together designed pipe shafts with brackets, sideguids etc. including cost of Shutter,27.5Cm long wire spring,top cover & ball bearing etc. complete. SI. No. 520, 521, 522, 523 16 S/F rolling shutters of aproved make made of 80x125 mm (3x18 gauge) cold rolled MS lath Interlocked through their entire length together designed pipe shafts with brackets, sideguids etc. including cost of Shutter,27.5Cm long wire spring,top cover & ball bearing etc. complete. SI. No. 520, 521, 522, 523 17 S/F rolling shutters of aproved make made of 80x125 mm (3x18 gauge) cold rolled MS lath Interlocked through their entire length together designed pipe shafts with brackets, sideguids etc. including cost of Shutter,27.5Cm long wire spring,top cover & ball bearing etc. complete. SI. No. 520, 521, 522, 523 18 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners,all necessary fittings complete, including applying a priming coat of approved steel primer.Dsr Item No- 10.5.1 Using M.S. angels 40x40x6 mm for diagonal braces.Rate(5804.35*0.749) 19 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.Dsr Item No-13.48.3 rate (170.70*0.749) 20 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.DSR -10.16.1 (Rate-194.40*0.749)=145.61 kg 21 roviding corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cuttingto size and shape wherever required. (1.00 mm thick with zinc coating not less than 275 gm/m²) DSR -12.1.1 (Rate-1457.15*0.749)=1091.41 kg
