|
| 1 | Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site requirement along with foundation bolts nuts, washers, anchor plates etc complete in all respect as per direction of E/I. etc (S.I No. 652/2018) |
| 2 | Supply & fixing of 20 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 410 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 8 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site requirement along with foundation bolts nuts, washers, anchor plates etc complete in all respect as per direction of E/I. etc (S.I No. 653/2018) |
| 3 | Supply and laying of aluminium insulated armoured served sheathed cables 1100 Volts conductor PVC grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size.The armouring of the cable shall be properly connected with the earth conductor by clamps etc complete in all respect as per direction of E/I etc (S.I No 501 (H)/2018 10 sq. Mm 4 core) |
| 4 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect as per direction of E/I etc. (Which are registered and approved at least by PWD) S.I No 1455/2018 CAT-AAA |
| 5 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 140 to 150 Watt. Confirming to IP 66 protection complete in all respect as per direction of E/I etc. (Which are registered and approved at least by PWD) (S.I No 1454/2018 CAT-AAA) |
| 6 | Supplyand fixing of Safe Earthing Electrode T-39 (Hot-Dip Galvanized), Length 2000mm, outer pipe 76mm inner Dia 38mm termina Dia 12 mm,outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra)Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. S.I no 725(D)/2018 |
| 7 | Supply and fixing capacity of automatic street light cubicle controal panel painted woth anticorrosive alkali ad acid proof paint consistiing of time swithc TSO 100 series with contactors, HRC fuses, isolating switch metering insrument & instrument box with CTs etc. in case of TPN, complete in all respect. 40A TPN(S.I No 807(c)(ii)2018 ) |
| 8 | Supply and fixing of single unit LED aviation Obstruction light complete with transformer and LED spiral etc complete in all respect. (S.I No-409/2018) |
| 9 | Supply and fixing of factory wired integral LED street light luminaires with die cast aluminium housing built with dirver set suitable for 75 to 90 Watt. Confirming to IP 66 protection complete in all respect. as per direction of E/I (Bajaj/crompton/havells/philips make)S.I No 1423 CAT-AAA |
| 10 | S/F of aluminim insulated PVC cable 10 sq mm 2 core is directed by the engineer incharge, complete in all respect. (Approved Rate) E-File No-MZDA/ENGG0ES/18/2025-ENGG-MZDA |
| 11 | Supply and fixing of plain or pin type copper tin plated cable socket (lig) to the cable leads, insulating with tape and making connection etc. Complete in all respect as per direction of the Engineer-in-Charge (S.I No. 504 C/2018) |
