Drinking Water Supply and Sanitation Government Departments Closing in 0 days TDR #52092673

Tender For Annual Rate Contract Of Regular Maintenance Of Centrifugal /Monoblock Pump Set At Various Wss Under Sub Dn Sayla Division Jalore

Issued by Government Departments · sayla, Rajasthan
Tender Value
6 Lakhs
Estimated cost
Bid Submission
07 Nov 2025
0 days left
EMD
12000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
sayla → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Annual Rate Contract Of Regular Maintenance Of Centrifugal /Monoblock Pump Set At Various Wss Under Sub Dn Sayla Division Jalore

BOQ

Name of Work:Annual Rate Contract of Regular Maintenance of Centrifugal/ Monoblock Pump Motor at various WSS under sub Division Sayla Division Jalore
Sl. No. Item Description
1ACE PHED II Jodhpur BSR 2020
2Rewinding of three phase squirrel cage induction motor ofMonoblock pump sets including all necessary material and of the same characteristics as original with required size of super enameled copper wire (including cost of copper wire),\"E\" class insulation material and testing of motor on no load but to be guaranteed against testing on load at site, including transportation of motor pump to and from Div/AEn/JEn store complete as per direction of engineer in charge.
33 H.P.
45 H.P.
57.5 HP
610.00 HP
712.5 HP
815.00 HP
917.50 HP
1020.00 HP
11SUPPLY & FIXING OF SPARE PARTS FOR MONOBLOCK PUMPSET (MOTOR + PUMP)
12Connection Plates
13up to 10 HP
1410 HP to 20 HP
15Cooling Fan
16up to 10 HP
1710 HP to 20 HP
18GM/SS bush
19Upto 10 HP
2010 HP to 20 HP
21Mechanical reconditioning of Bearing sheet
22Upto 10 HP
2310 HP to 20 HP
24Mechanical reconditioning ofImpeller sheet and Key way slot
25Upto 10 HP
2610 HP to 20 HP
27Oil seal
28Upto 10 HP
2910 HP to 20 HP
30Labour charge for opening and fitting of pump sets
31Upto 10 HP
3210 HP to 20 HP
33Rewinding of three phase squirrel cage induction motor of HSC pump sets including all necessary material and of the same characteristics as original with required size of super enamelled copper wire (including cost of copper wire) \"E\" class insulation material and testing of motor on no load but to be guaranteed against testing on load at site, including making electric connection at site of installation of motor with starter, alignment with pump setsand transportation to and fro from installation site complete as per direction of engineer in charge at site.
34Above 15.00 HP but upto 17.50 HP
35Above 17.50 HP but upto 20.00 HP
36Above 20.00 HP but upto 25.00 HP
37Above 25.00 HP but upto 30.00 HP
38Above 30.00 HP but upto 35.00 HP
39Above 35.00HP but upto 40.00 HP
40Above 40.00 HP but upto 45.00 HP
41Above 45.00 HP but upto 50.00 HP
42Above 50.00 HP but upto 60.00 HP
43Above 60.00 HP but upto 75.00 HP
44Above 75.00 HP but upto 100.00 HP
45SUPPLY & FIXING OF SPARE PARTS HSC PUMP SETS (MOTOR + PUMP)
46Connection Plates
475 HP to 20 HP
4820 HP to 30 HP
4930 HP to 50 HP
50Above 50 HP to 100 HP
51Cooling Fan
525 HP to 20 HP
5320 HP to 30 HP
5430 HP to 50 HP
55Above 50 HP to 100 HP
56Fan Cover
575 HP to 20 HP
5820 HP to 30 HP
5930 HP to 50 HP
60Above 50 HP to 100 HP
61G.M./SS Gland Guide Bush
625 HP to 20 HP
6320 HP to 30 HP
6430 HP to 50 HP
65Above 50 HP to 100 HP
66Shaft with Sleeve Chuck Nut
675 HP to 20 HP
6820 HP to 30 HP
6930 HP to 50 HP
70Above 50 HP to 275 HP
71Shaft Chuck Nut
725 HP to 20 HP
7320 HP to 30 HP
7430 HP to 50 HP
75Above 50 HP to 275 HP
76G.M. Neck Ring
775 HP to 20 HP
7820 HP to 30 HP
7930 HP to 50 HP
80Above 50 HP to 100 HP
81Bush Shaft Sleeve of G.M.
825 HP to 20 HP
8320 HP to 30 HP
8430 HP to 50 HP
85Above 50 HP to 100 HP
86G.M. Gland Cover
875 HP to 20 HP
8820 HP to 30 HP
8930 HP to 50 HP
90Above 50 HP to 100 HP
91S.S. Shaft (Non Magnetic)
925 HP to 20 HP
9320 HP to 30 HP
9430 HP to 50 HP
95Above 50 HP to 100 HP
96G.M. Shaft Sleeve Check Nut
975 HP to 20 HP
9820 HP to 30 HP
9930 HP to 50 HP
100Above 50 HP to 100 HP
101M.S. Shaft Check Nut
1025 HP to 20 HP
10320 HP to 30 HP
10430 HP to 50 HP
105Above 50 HP to 100 HP
106Cooling pipe set with nozzle & Nut
1075 HP to 20 HP
10820 HP to 30 HP
10930 HP to 50 HP
110Above 50 HP to 100 HP
111AIR Cock
1125 HP to 20 HP
11320 HP to 30 HP
11430 HP to 50 HP
115Above 50 HP to 100 HP
116JOB WORK FOR REPAIR OF PUMP MOTOR
117Bearing Housing (rebuilding, turning & finishing)
1185 HP to 20 HP
11920 HP to 30 HP
12030 HP to 50 HP
121Above 50 HP to 100 HP
122Bearing Cap (rebuilding, turning & finishing)
1235 HP to 20 HP
12420 HP to 30 HP
12530 HP to 50 HP
126Above 50 HP to 100 HP
127Impeller Reconditioning for all type of Pump
1285 HP to 20 HP
12920 HP to 30 HP
13030 HP to 50 HP
131Above 50 HP to 100 HP
132Labour Charges for Dismantling & Assembling of Pump
1335 HP to 20 HP
13420 HP to 30 HP
13530 HP to 50 HP
136Above 50 HP to 100 HP
137Coupling with stud and rubber bush
1385 HP to 20 HP
13920 HP to 30 HP
14030 HP to 50 HP
141Above 50 HP to 100 HP
142Supply & Fixing of tyre coupling sets according torelevant IS code in Centrifugal couple pump sets of approved make Unit. This job also included re-alignment of centrifugal couple pump set after fixing of tyre coupling set as per directed by Engineer-in charge.
143Type 14 Nos. set
144Type 15 Nos. set
145Type 16 Nos. set
146Type 17 Nos. set
147Supply and fixing Ball bearing of Various size for centrifugal/monoblock pump set of ISI Mark as per specification and approved make by EIC.
1486304 or equivalent size
1496305 or equivalent size
1506306 or equivalent size
1516307 or equivalent size
1526308 or equivalent size
1536309 or equivalent size
1546310 or equivalent size
1556311 or equivalent size
1566312 or equivalent size
1576316 or equivalent size
1586317 or equivalent size
1596318 or equivalent size
1606319 or equivalent size
161NU319C or equivalent size
162Suuplying of super enamal copper wire suitable for rewindind of induction motor (only procured for motor rewinding)
163Routine maintenance of centrifugal coupled pump and motorincluding opening, cleaning, greasing and refitting / changing of ball bearing if required, gland refilling and replacing all rusted studs, replacing rubber bushes & coupling nut & bolts for coupling pulley, tightening all nut & bolts of foundation, baseplate, pump & motor etc. Checking & correcting alignment of pump & motor including necessary materials i.e. grease, nut & bolts, studs, washers, gland packing and rubber bushes etc. work done at site complete job
1645 HPto 20 HP
16520 HPto 30 HP
166Above 30 HP and up to 50 HP
167Above 50 HP and up to 100 HP
168Cleaning of pump house by air blower/ vacuum cleaner or other means including removing of JALA from ceiling and walls etc. complete Job.
169Cleaning of Electric PanelPMCC by air blower/vacuum cleaner or other means including tightening of loose connections etc. complete job.
170Replacing of damaged/broken gland packing plate with new gland packing plate suitable for centrifugal pump shafts and nut&bolts etc. complete job.
1715 HP to 20 HP
172Above 20 HP and up to 30 HP
173Above 30 HP and up to 50 HP
174Above 50 HP and up to 100 HP

AI Tender Summary

OUR REF NO 52092673
AUTHORITY Government Departments
TENDER VALUE 6 Lakhs
LAST DATE 07-11-2025
Authority
Authority Name Public Health Engineering Department
Work Description Annual Rate Contract Of Regular Maintenance Of Centrifugal /Monoblock Pump Set At Various Wss Under Sub Dn Sayla Division Jalore
Basic Detail
Tender No Nit No 44/2025-26
Bidding Type Tender
Location
City sayla
State Rajasthan
Key Dates
Publish Date 31 Oct 2025
Submission Date 07 Nov 2025
Open Date 08 Nov 2025
Finance
Tender Value 6 Lakhs
Tender Fee 500
EMD 12000
Exemption Available
Document List
eb23ab0e-cdac-44f7-9736-d295bf34b715.html
BOQ_908388.xls
tenderdocument44.pdf
Tendernotice_1.pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 31, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 07, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Nov 08, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

eb23ab0e-cdac-44f7-9736-d295bf34b715.html

xls

BOQ_908388.xls

pdf

tenderdocument44.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders