Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 24-11-2025 | CERTAIN AMENDMENTS TO CRITICAL DATES | Date | 27-11-2025 |
| Sl. No. | Item Description |
| 1 | Schedule \"A\" Section - I |
| 2 | Excavating in trenches, not exceeding 1.50 metre wide and not exceeding 1.50m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exceeding 10 sq.m on plan and not exceeding 1.50m in depth and getting out in hard/dense soil complete, all as specified and as directed. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soil of any description, complete all as specified and as directed.. |
| 4 | Removing excavated soil to a distance not exceeding 50 metre and deposited where directed at a level not exceeding 1.5m above the starting point, complete all as specified. |
| 5 | Taking up or down steel tubing and connectionsincluding cleaning for refixing or removal to store complete all as specified and directed for the following size :- |
| 6 | 100mm bore |
| 7 | 80mm bore |
| 8 | Supply and fixing steel water tubing , medium grade galvanized, ISI marked with all fittings laids in floor/trenches/under road etc , complete all as specifiedand directed for the following size :- |
| 9 | 100mm bore |
| 10 | 80mm bore |
| 11 | Refixingof steel water tubingin new or old position withall new fittings as required, laids in floor , trenches and under road , complete all as specifiedand directedfor the following size :- |
| 12 | 100mm bore |
| 13 | 80mm bore |
| 14 | Material and labour forjointing, connecting steel water tubing medium grade, galvanizedin trenches/under roads/floors etc. incl welding works, fitting with heavy duty flanged joint rubber gasket, nut, bolts and washers of suitable size, etc. complete, all as specified and directedfor the following bore pipe:-. |
| 15 | 100mm bore |
| 16 | 80mm bore |
| 17 | Taking up or down steel tubing and connectionsincluding cleaning for refixing or removal to store complete all as specified and directed for the following size :- |
| 18 | 50mm bore |
| 19 | 40mm bore |
| 20 | 25mm bore |
| 21 | 20mm bore |
| 22 | 15mm bore |
| 23 | Refixingof steel water tubingin new or old position withall new fittings as required, laids in floor , trenches and under road , complete all as specifiedand directedfor the following size :- |
| 24 | 50mm bore |
| 25 | 40mm bore |
| 26 | 25mm bore |
| 27 | 20mm bore |
| 28 | 15mm bore |
| 29 | Supply and fixing steel water tubingmedium grade galvanized , laids in floor ,trenches and under road , complete all as specifiedand directed for following bore pipe. |
| 30 | 50mm bore |
| 31 | 40mm bore |
| 32 | 25mm bore |
| 33 | 20mm bore |
| 34 | 15mm bore |
| 35 | Supply and fixing in repairsof gun metal gate valve with iron wheel head screwed both ends for iron pipes and fixed complete all as specified and directed of following bore dia:- |
| 36 | 50mm bore |
| 37 | 40mm bore |
| 38 | 25mm bore |
| 39 | 20mm bore |
| 40 | 15mm bore |
| 41 | Supply and fixing in repairs of CI sluice valve with flanged ends, PN-1.6, ISI marked,including joints and jointing materials i.e. gasket, nuts, bolts, washers, etc. complete all as specified and directed of following bore dia:- |
| 42 | 100mm dia bore |
| 43 | 80mm dia bore |
| 44 | Supply and fixing in repairs of Non return valve, heavy duty cast iron, both ends flanged including all necessary fittings such as nuts, bolts, washers, & rubber/fibre gasket etc. complete all as specified and directed of following bore dia:- |
| 45 | 150mm dia bore |
| 46 | 100mm dia bore |
| 47 | 80mm dia bore |
| 48 | Supply and fixing in repairs of 100mm boreAir release valve with 2 air outlet, 50mm bore, ISI marked and fixing in GI water supply main in same or in other location including jointing material such as nut, bolts, washers and rubber/fibre gasket complete all as specified and directed. |
| 49 | Supply and fixing in repairs of 80mm boreAir release valve with 2 air outlet, 50mm bore, ISI marked and fixing in GI water supply main in same or in other location including jointing material such as nut, bolts, washers and rubber/fibre gasket complete all as specified and directed. |
| 50 | Material & labour for construction of fly ash brick masonry valve chamber of size 1050X1050X1050mm, cement concrete in 1:4:8 type D2 using 40mm graded stone aggregate foundation and 15mm thick plaster in cement mortar 1:4 on brick wall inside and brick chamber built in cement mortar 1:6 including providing of MS sheet cover 3mm thick with angle iron brackets grouted to brick wall duly painted with two coats of synthetic enamel paint over one coat of red oxide primer with lifting handle and locking arrangement etc. complete all as specified and as directed. |
| 51 | Material and labour for PCC 1:2:4 Type B2 using 40 mm graded aggregate as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases)for rest to water supply main and providing a clamp of made of 50x6mm flat iron to hold the water mains complete all as specified and directed. |
| 52 | Supply and fixing in repair 20mm bore, Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule including fittings such as nipple, union, socket, etc. complete all as specified and directed.. |
| 53 | Supply and fixing in repair 25mm bore, Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule including fittings such as nipple, union, socket, etc. complete all as specified and directed.. |
| 54 | Supply only alum sulphate (crystal) of best quality complete all as specified and directed.. |
| 55 | Supply and fixing in repairs of PVC unsulated with 240 Square milimeter Single core ,HRFR PVC round sheathed , copper conductor (flexible) industrial cable ,1100Volt conforming to IS 694 complete all as specified and directed. |
| 56 | Material and labourfor X&Y section of mild steel angle or channels including bracing, clamps, back plate and all necessary drilling, bolting or riveting, etc., for holding GI water mains in hilly area and similar workconforming to Fe-290-Gde E-165including one coat of primer & finishing coat of synthetic enamel paint complete all as specified and directedNote: Earth work , PCC/Cement concrete work shall be measured and paid separately in respective item of schedule. |
| 57 | Supply and fixing inreplacement of unserviceable415 V , 3poles & 4 pole adjustable thermal & fixed magnetic MCCB in existing LT electric motor starter pannel of following capacity at various location of water supply installation complete all as specified and directed |
| 58 | MCCB Four pole 415V-400A-36 KA |
| 59 | MCCB Four pole 415V-200A-36 KA |
| 60 | MCCB Four pole 415V-100A-36 KA |
| 61 | MCCB Four pole 415V-63A-36 KA |
| 62 | MCCB Three pole 415V-200A-36 KA |
| 63 | MCCB Three pole 415V-63A-36 KA |
| 64 | MCCB Three pole 415V-40A-36 KA |
| 65 | Material and labourfor repair & replacement of unserviceable Spares of star delta Motor Starter Panel of diffrenet capacity as under. three pole power contactor with AC Coil,control relay with AC coil, thermal over load relay, start & stop push button Green & Red, Single phase preventor (SPP),Timer, voltmeter,ammeter, Indicating lamp, RYB selector switches ,motor On & trip indicating lamp etc. complete in all respect motor starter panel of each water supply instalation by ensuring the functionality statecomplete all as specified and directed. |
| 66 | (a) Start Push button Green |
| 67 | (b) Stop Push button Red |
| 68 | (c) Single Phase preventer (SPP) |
| 69 | (d) Motor ON indicating light Green |
| 70 | (e) Motor Trip indicating light Yellow |
| 71 | (f) Voltmeter Ammeter selector switch |
| 72 | (g) Voltmeter 0-500V |
| 73 | (h) Ammeter 0-200A & 0-400A |
| 74 | (j) Power contactor AC3 40Amp, 415 V Suitable for 20 HP, 15kW Motor |
| 75 | (k) Timer rating 0-100 Sec |
| 76 | (l) Overload Relay BOCR-3DE, 100-240A, 0.5-80A ( Wide range type) 11-900A with an external CT Under current setting0.5 - less than OC setting/OFFTime settingStart (D-Time) OFF(--), 1-200 Sec Trip (O-Time)0.5,1-30 sec, 1-30 ClassPower Supply 100-240 VAC , 50/80HzTrip time Over Current O-Time Phase loss within 3 Sec Phase unbalance within 8 Sec Phase Reverse 0.1 Sec |
| 77 | (m) Power contactor AC3 25Amp, 415 V, 3 pole Suitable for 5 HP DOL starter |
| 78 | (n) Power contactor AC3 32Amp, 415 V, 3 pole Suitable for 15 HP Star Delta starter |
| 79 | (o) Power contactor AC3 150Amp, 415 V, 3 pole Suitable for 125 HP DOL starter |
| 80 | (p) Power contactor AC3 265Amp, 415 V, 3 pole Suitable for 180 HP DOL starter |
| 81 | (q) Power contactor AC3 140Amp, 415 V, 3 pole Suitable for 100 HP DOL starter |
| 82 | Supply & laying of synthetic Rubber insulated mats 2mm thick for Voltage upto 3.3 KV for electrical purposeas per IS 15652-2006 superseding IS-5424 suitable for electrical shock safety of size 2.00 meter x1.00 meter complete all as specified and directed |
| 83 | Supply and fixingof pressure gauge of range 0-20 kg/cm^2 (0-300 LB/Inch^2) in delivery line of pump at pump house at water supply installation including dismantling the old unservicable pressure gaugecomplete all as specified and directed |
| 84 | Material and labourfor disconnecting/unservicing coupling for 40HP multi stage horizontal end suction pump & seperating pump from motor,disconnecting suction & delievery pipe and taking out the pump from base frame,transporting to workshop to carry out the necessary repairs & replacements the following unsv spares part as required. After repairs the pump shoulb be installed at the existing location making all connection suction & delievery pipe line including jointing/connecting with motor carefully including commissioning & testing at site to the entire satisfaction of Engr-in-charge.(Note Replacement/repairs of materials are measured serepartly) |
| 85 | (a) Coupling set for 40HP pump motor set |
| 86 | (b) Replacement of gun metal impeller |
| 87 | (c) Replacement of gun metal bush |
| 88 | (d) Replacement of gland sleeve |
| 89 | (e) Replacement of Diffuser packing |
| 90 | (f) Repair of impeller ie brazing,machining, reboring the & finishing of impellar |
| 91 | (g) Repair of impeller ie making outer dia proper ie brazing,machining & finishing |
| 92 | (h) Replacement of new key way of impeller disc |
| 93 | Labour for disconnecting/unservicing coupling for 20HP/15HP centrifugal pump & seperating from motor including disconnecting the suction & delievery pipe line and taking out the pump from base frame, transporting to workshop to carry out the necessary repair & replacement of unserviceable spares part as required at site. After repairing the pump installed at existing location,making all connection suction,delivery, pipe line & joint with motor by coupling carefully including commissioning testing at site to ensure the satisfaction of Engr-in-charge.Scope of repair work as under inclusive in unit rate.(i) Replacement of unsv gunmetal/ CI impeller(ii) Replacement of unsv gland sleeve(iii) Replacement of unsv gunmetal bush(iv) Replacement of gunmetal impeller ie brazing machining & reboring the impeller (v) Filling the new gland packingNote: All unsv spares will be contractors property as schedule of credit amount included in unit rate. |
| 94 | ditto as per Item No. 28.00 here and before but for 7.5 HP & 5 HP |
| 95 | Material and labourfor disconnecting/taking out electric motor of capacity 15 HP/20 HP bearing NO. DE/NDE 6309-ZZ & 6209-ZZ from foundation & sepration from pump including transporting the same to the workshop for refixing the same at existing location after repair & making electric connection including commissioning & testing complete including following repair/rewinding & replacement of unsv spares part ie taking out burnt copper winding wire from stator, cleaning of stator & rewinding the motor with super enamelled copper wire as per existing gauge including super quality of varnishing of stator & \"F\" class insulating material,replacement of unsv bearing no. DE & NDE No, 6319-C3 all as specified. Weight of burnt stator & alter rewinding the stator will be measured in the presence of MES Rep. at repair place/workplace also transportaition charge of MES rep from destination to workshop & back inclusive in unit rate.Note: Old unsv burnt copper wire & bearing as schedule of credit accounted in the unit rate. |
| 96 | ditto as per item no. 30.00 here and before but for 7.5 HP/5 HP bearing NO. DE/NDE 6206/6206 |
| 97 | Material and labour for disconnecting existing electric aluminium cable from main LT Electric panel to motor starter panel & replacement of new LT Copper cable ,multi stranded, twin core 10 Sqmm complete all as specified and directed |
| 98 | Material and labour ofPCC 1:4:8 typeD-2using 40mm graded crushed stone aggregate as in bed block,levelling course,haunching ,coping,fillets , bedding and similar work including rounded or chamfered etc complete allas specified and directed. |
| 99 | Material and labour for plain cement concrete 1:3:6 type C-2 (using 40 mm graded mechanically crushed stone aggregate), as in foundation, filling and mass concrete, complete all as specified and directed. |
| 100 | Supply & fixing or fabricated of Mild steel frame glow sign boards on flex sheet size 1550mm x 910mm duly indicating the name of installation and logo of MES with suitable redium stencil and necessary items for fixing on roof /wall grouting/ PCC work complete all as specified and directed.Note : Background colour sky blue and matter or size of stencil as direction by Enger-in-Charge. |
| 101 | Taking up or down old GI/DI/MS pipeand connectionsincluding cleaning for refixing or removal to store complete all as specified and directed for the following size :- |
| 102 | 200mm bore dia |
| 103 | 150mm bore dia |
| 104 | Supply and fixing MS pipe ISI marked with all fittings laids in floor/trenches/under road etc , Heavy duty flange ,nut bolts washers ,rubber/fibre gasket of thickness 5mmcomplete all as specifiedand directed for the following size Note: Cost of replacement of unsv heavy duty flange nut bolts washer heavy duty rubber/fibre gasket inclusive in the unit rate. Nothing will be paid extra in this account,only earth work will be paid seperately in respective item of schedule. |
| 105 | (a) 200mm bore dia |
| 106 | (b) 150mm bore dia |
| 107 | Material and labour forjointing, connecting steel water tubing medium grade, galvanizedin trenches/under roads/floors etc. incl welding works, fitting with heavy duty flanged joint rubber gasket, nut, bolts and washers of suitable size, etc. complete, all as specified and directedfor the following bore pipe:-Note: Cost of replacement of unsv heavy duty flanged joint rubber gasket, nut, bolts and washers of suitable size, etc are deemed in quoted rate. |
| 108 | (a) 200mm bore dia |
| 109 | (b) 150mm bore dia |
| 110 | Material and labourfor dismantlling of unservicableexisting heavy duty high pressure Sluice valve/Gate valve & replacement of heavy duty High pressure cast steel gate valve with flanged ends class 300 ISI marked including joint & jointing material such as nut bolts,washer, rubber/fiber gasket 5.0 mm thick complete all as specified & directed of following bore dia:- |
| 111 | (d)200 mm dia bore |
| 112 | (c)150mm dia bore |
| 113 | Dismantlling/taking out old unsv cast iron foot valve flanged ends from suction pipe of pump raw water new & old & back wash pump house at gambhar and supply & fixing of cast iron strainer metallic foot valve with side & bottom flanged end ISI marked complete with all respect nut bolts & washer ,rubber/fiber gasket all as specified of size 100mm bore. |
| 114 | Material and labour for disconnecting/unservicing coupling for 240HP multi stage end suction 14 stage pump & seperating pump from motor,disconnecting suction & delievery pipe and taking out the pump from base frame,transporting to workshop to carry out the necessary repairs & replacements the following unsv spares part as required. After repairs the pump shoulb be installed at the existing location making all connection suction & delievery pipe line including jointing/connecting with motor carefully including commissioning & testing at site to thr entire satisfaction of Engr-in-charge. |
| 115 | (a) Coupling set for 240HP pump motor set |
| 116 | (b) Replacement of gun metal impeller |
| 117 | (c) Replacement of gun metal bush |
| 118 | (d) Replacement of gland sleeve |
| 119 | (e) Replacement of body neckring Gun metal |
| 120 | (f) Replacement of Diffuser packing |
| 121 | (g) Repair of impeller ie brazing,machining & reboring the same for finishing the accurate size |
| 122 | (h) Replacement of new key way of impeller disc |
| 123 | (j) Repairs of diffuser ie brazing,machining & finishing of outer dia of diffuser |
| 124 | (k) Repairs of impeller ie brazing,machining & finishing of outer dia of impellar |
| 125 | ditto as per item no. 41.00 here and before but for 180 HP pump motor 13 Stage. |
| 126 | (a) Coupling set for 180 HP pump motor set |
| 127 | (b) Replacement of gun metal impeller |
| 128 | (c) Replacement of gun metal bush |
| 129 | (d) Replacement of gland sleeve |
| 130 | (e) Replacement of body neckring Gun metal |
| 131 | (f) Replacement of Diffuser packing |
| 132 | (g) Repair of impeller ie brazing,machining & reboring the same for finishing the accurate size |
| 133 | Replacement of new key way of impeller disc |
| 134 | (h) Repairs of diffuser ie brazing,machining & finishing of outer dia of diffuser |
| 135 | (j) Repairs of impeller ie brazing,machining & finishing of outer dia of impellar |
| 136 | ditto as per item no. 41.00 here and before but for 100 & 125 HP pump motor, 5 Stage & 9 Stage |
| 137 | (a) Coupling set for pump motor set |
| 138 | (b) Replacement of gun metal impeller |
| 139 | (c) Replacement of gun metal bush |
| 140 | (d) Replacement of gland sleeve |
| 141 | (e) Replacement of body neckring Gun metal |
| 142 | (f) Replacement of Diffuser packing |
| 143 | (g) Repair of impeller ie brazing,machining & reboring the same for finishing the accurate size |
| 144 | Replacement of new key way of impeller disc |
| 145 | (h) Repairs of diffuser ie brazing,machining & finishing of outer dia of diffuser |
| 146 | (j) Repairs of impeller ie brazing,machining & finishing of outer dia of impellar |
| 147 | Material and labour for Disconnecting/taking out electric motor of capacity 240HP/180 KW from foundation & sepration from pump including transporting the same to the workshop for refixing the same at existing location after repair & making electric connection including commissioning & testing complete including following repair/rewinding & replacement of unsv spares part ie taking out burnt copper winding wire from stator, cleaning of stator & rewinding the motor with super enamelled copper wire as per existing gauge including super quality of varnishing of stator & \"F\" class insulating material,replacement of unsv bearing ir DE & NDE No, 6319-C3 all as specified. Weight of burnt stator & alter rewinding the stator will be measured in the presence of MES Rep. at repair place/workplace also transportaition charge of MES rep from destination to workshop & back inclusive in unit rate.Note: Old unsv burnt copper wire & bearing as schedule of credit accounted in the unit rate. |
| 148 | ditto as per item no. 44.00 here and before but for 180 HP/132 KW |
| 149 | ditto as per item no. 44.00 here and before but for 100 HP/75 KW& 125HP/93 KW bearing NO. DE/NDE NU 318/6318 |
| 150 | Material and labour for disconnecting existing electric aluminium cable from main LT Electric panel to motor starter panel No. 1 and 2 of 100 HP & 120 HP & replacement of new LT Copper cable ,multi stranded, Single core 95 Sqmm |
| 151 | ditto as per item no. 47.00 here and before but of 185 Sqmm |
| 152 | Supply and fixingofSteel tubular swaged poles with cast iron base plate,finial,taper plug,bolts,nuts and screws type 410 SP-31, 9 metres long, duly painted with two coats of aluminium paint over a coat of red oxide primer and providing 30 cm wide alternate black and yellow strips up to 1.5 meter from GL including dismantling of old unserviceable complete all as specified.Note- Excavation, earth work and PCC shall be measured and paid separately under relevant items. |
| 153 | Supply and fixing ofoctagonal GI decorative street light pole 7m long complete with brackets for mounting of flood light, in built connectors for connecting cables mounted on suitable for PCC structure 1:2:4 B1 300 X 300 x 900 mm burried in ground to a depth of 600mm including foundation bolt grouted complete all as specified and directed. |
| 154 | Material and labour for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in foundation of electric poles, for base of pole , struts complete all as specified. |
| 155 | Material and labourfor PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in coping of electric poles complete all as specified. |
| 156 | Material and labourfor preparing of old painted surface of steel tubular electric pole 9 mtr long (effective painted length from top of foundation concrete to top of pole) including struts cross arms clamp, etc fitted on pole and applied one coat of aluminum paint after properly cleaned with sandpaper/wire brushes and including making alternate white and black strips 30 cms height (05 Nos strips) numbering of the poles by 2\" height letters complete all the metallic surfaces all as specified and directed . |
| 157 | Supply and fixing Steel water tubing,light grade, galvanised (ISI marked),25 mm bore with all fittings, laid in trenches/ under roads or fixed to poles for passing cables for protection of cables,complete, all as specified and directed. |
| 158 | Supply and fixingSteel water tubing,light grade, galvanised (ISI marked),50 mm bore with all fittings, laid in trenches/ under roads or fixed to poles for passing cables for protection of cables,complete, all as specified and directed. |
| 159 | Taking down old unserviceableLT cable any type and any sizecomplete all as specified and directed. |
| 160 | Supply, laying, jointing and testing ofXLPE insulated, armoured, heavy duty LT cable 1100 Volts gradewith aluminium conductor laid in trenches, on poles, through pipes, fixed to walls etc cross sectional area 16 Sqmm 2 core,complete, all as specified and directed. |
| 161 | Supply, laying, jointing and testing ofXLPE insulated, armoured, heavy duty LT cable 1100 Volts gradewith aluminium conductor laid in trenches, on poles, through pipes, fixed to walls etc cross sectional area 16 Sqmm 4 core,complete, all as specified and directed. |
| 162 | Supply, laying, jointing and testing ofXLPE insulated, armoured, heavy duty LT cable 1100 Volts gradewith aluminium conductor laid in trenches, on poles, through pipes, fixed to walls etc cross sectional area 25 Sqmm 4 core,complete, all as specified and directed. |
| 163 | Supply, laying, jointing and testing ofXLPE insulated, armoured, heavy duty LT cable 1100 Volts grade with aluminium conductor laid in trenches, on poles, through pipes, fixed to walls etc cross sectional area 35 Sqmm 3.5 core,complete, all as specified and directed. |
| 164 | Supplying & fixing in replacementof double walled corrugated HDPE duct pipe of 63 mm outer dia confirming to IS-14930 (Part-II) of approved colour with fittinggs for cable protection complete all as specified and direcetd. |
| 165 | Supply and fixingFRP pole box of size 25 cm x 20 cm x 10 cm depth with locking arrangement, hinged door, suitable to accommodate 2 Nos of FRP insulators for taking branch connection of street light from LT UG cable and fixed in any position with pole using clamps made out of MS flat of size 25 x 3 mm thick cut and bend to necessary shape, including MS nut, bolt and washers etc. and including providing MCB SPN of suitable capacity including dismantling of old terminal box complete all as directed. |
| 166 | Supply and fixing in repairs LED driver 240 volts 70 watt for street light complete all as directed. |
| 167 | Supply and fixing in repairsLED driver 240 volts 60 watt for street light complete all as directed. |
| 168 | Supply and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, 06 Sqmm twin core cable flat including dismantling of old unserviceable cable complete all as specified and directed |
| 169 | Supply, installation, testing and commissioning in replacement factory made bus bar chamber, outdoor type, weather proof having both side openable hinged door shutters with locking arrangement, size of chamber 90cm x 60cm x 50cm made of 3mm thick CRCA sheet, powder coated paint inside and outside, welded with 4 Nos angle iron legs of size 40 x 40 x 6mm, 60cm long duly painted with two coats of black enamelled paint over a coat of red oxide primer and errected in PCC 1:3:6, type C2 foundation at suitable depth and having the following accessories:-Incoming : MCCB 04 pole 100 Amp, 25 KAOutgoing : 04 Nos 300 Amp Aluminium bus bar incl 08 nos hole on each bus bar with nut and bolts |
| 170 | Material and labour for renewal of Earthling of poles/system with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick, buried verticallyin ground not less than2.25 metres below ground level with top edge of the plate not less than1.5 mtr below ground level, connected to GI strip 32x6mm by means ofnuts,bolts and washers and encased in and inclduing 40mm dia GI light grade pipe upto 2.4 mtr height from ground level fixed by MS flat iron clamp 40mmx5mm with nut , bolt and washers. GI strip fixed to base along pole and connected to exisiting system with alternate layers of charcoal dust, salt packed around plate 150mm thick including watering GI pipe, medium grade 20mm dia, 1.5mtr ling fixed to funnel with wire mesh complete with PCC chamber andRCC chamber cover all as Electrical plate No. 3 SSR part I-2009 including excavation and earth work in any type of starta and testing on completion. (Note:- GI strip and GI pipe measured under this item ) |
| 171 | Supply and fixingLED 15 Watt Post top luminaire, New generation, IP 65 LED post-top family, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. Clear Cover offers bright illumination for different applications., fixed in repair on GI Pipe and including connecting up with suitable size of copper conductor cable from junction box including taking down of old lights complete all as directed. |
| 172 | Supply, installation, testing and commissioning of pole mounted canopy headedsingledoor outdoor type totally enclosed street light controlling panel,suitable for 3 phase, 4 wire440 Volt , made out of 3.15 mm thick CRCA sheet, cubical type, duly powder coated RAL 7035 , having fronthinged door with neoprence rubber gasket including danger notice plate, earthing termination points, bottom detachable gland plate with holes for incomming and out going cablesfixing arrangement with 40X5 mm clamp 2 Nos with nuts and boltscomplete with following accessoriesi) MCB 4 Pole 63 Amps 10 KA breaking capacity-01 Noii) Astrotype Time switch 110-240 Volt suitable for 24 hours operation of street light. iii) Contactor threepole 40 Amps 415 volt Coil operating Voltage 230 volt.iv) Auto manual switch 10 Amp v) MCB TPN 32 Amps 10KA C Curve -02 Nos .complete all including internal connection done by using suitable size of copper wire complete all as specified and directed. |
| 173 | Taking out complete Filter media (gravels & sand) from primary and secondary filter bed of rapid gravity sand filter at gambhar pump house complete all as specified & directed by Engr-in-Charge.Note: i) Total volume of media is approx 75 Cum.ii) different size of gravel should be cleaned from detergend & solution of Hypo chloride Acid & stacked after sieveing in proper size of gravel for reuse at site of following sizes- 20mm to 40mm,12mm to 20mm,6mm to 12mm & 3mm to 6mm gravel should be reuse only for filter media & the same will be measured & paid seperately in respective item of schedule,iii) Coarse sand of size 0.35mm to 0.60mm after sieveing from proper size of sieve should be stacked for measurement and reuse at site will be measured & paid seperately in respective item of schedule.) |
| 174 | Material and labour for serviceing of air compressor of capacity 7.5 Cum/minute by greasing,cleaning,replacement of old unsv. V belts of suitable size and & No. including cleaning outlet presssure pipe & including all minor repair ie replacement ball bearing of compresser motor etc. all as specified & directed by Engr-in-Charge. |
| 175 | Material and labour for damaged/ unplastered surface of internal wall ,filter bed and valve pit chamber at filtration plant to be repair & plastering in the ratio of 1:4 including new and old surface of wall & bed of filter to be painted withtwo coat of wall primer over a one coat of primer all as specified & directed by Engr-in-charge.(Note:- Paint should be approved by Engr-in-Charge before painting work) |
| 176 | Material and labour for preparing the old surface of external & internal wall of filtration plant except filter media plant by washing, rubbing down & stopping at distempered & painted surface and distempering wall with two coat of oil emulsion distemper all asspecified & directed by Engr-in-charge. |
| 177 | Material and labour for laying, spreading & compacting the gravel (pabbles) of under mentioned size in filter bed of primary & secondary filter chamber of filteration plant at Gambaer Pump House.Note: All the different size of gravel should be filled in filter bed after sieveing the proper size of gravel slacked measurements will be measured before & after filling the gravel. Actual consumed qty of gravel will be paid only in this item of schedule. |
| 178 | Gravel of size 20mm to 40mm in bottom layer upto 15cm depth |
| 179 | Gravel of size 12mm to 20mm in second bottom layer above (20 to 40)mm layer upto depth 15cm |
| 180 | Gravel of size 6mm to 12mm in third layer above (12 to 20)mm layer upto depth 15cm |
| 181 | Gravel of size 3mm to 6mm in fourth bottom layer above (6 to 12)mm layer upto depth 15cm |
| 182 | Labour only for filling, laying & spreding of Gravel of different size, 20 to 40mm, 12mm to 20mm, 6 to 12mm & 3mm to 6mm in filter bed all as specified & directed by vendor.Note: Old cleaned stacked Gravel retreived from item No 70.00 shall be measured befor filling & after filling in filter bed |
| 183 | For size 20mm to 40mm |
| 184 | For size 12mm to 20mm |
| 185 | For size 6mm to 12mm |
| 186 | For size 3mm to 6mm |
| 187 | Material and labour for filling, laying & spreading of coarse sand of size 0.35mm to 0.6mm for fillter media after above packing of Gravel level upto depth 35cm.Note: (i) Proper size of coarse sand should be stacked after sieveing from proper size of sieve. (ii) Stacked measurement shall be measured befor and after filling the coarse sand and actual qts of consumed coarse sand will be measured and paid only. |
| 188 | Labour only for filling, laying & spreading of coarse sand obtained from item no 70.00 for filter bed after packing the gravel layers upto depth 35cm Note: Stacked measurment befor and after filling the caorse sand shall be measured and only consumed qty of coarse sand shall be paid. |
| 189 | Material and labour for filling, laying & spreadning of cleaned and dry fine sand for filtter media after laying the layer of coares sand i.e top most layer upto 35cm depth all as specified and dierected by Engineer-in-Charge.Note: (i) Stacked measurement shall be measured befor and after filling the fine sand. (ii) Actual consumed qty of fine sand shall be measured and paid in this items of schedule. |
| 190 | Labour only for restoring the water supply through rapid gravity sand filter plant and checking & ensure the filter water flow per hours as per capacity of fillteration plant in the presence of Engineer-in-charge incl all area near by fillteration plant to be neat & clean and also writting a letter or figure (in block letters) as cleaning date of filter media , name of contractor. |
| 191 | Dismantling/taking out all the inlet, outlet, washout and back wash pipe, inspection chamber, butterfly valve etc from high pressure fillteration plant (circular type, vertical type) for cleaning and replacement of fillter media all as specified & directed by Engineer-in-Charge. Note: From high pressure fillteration plant to Gamber pump house. |
| 192 | Taking out of filter media from high pressure filteration plant and cleaning, washing with approved solution of detergent/chemical through applying adequate pressure and stacking the filter media of different size after sieveing the filter media like Gravel, coarse sand & fine sand of proper size of sieve, for reuse at site of work incl cleaning & washing preparing the filling of filter media in the all 05 unit (vessal) of high pressure filter. |
| 193 | Material and labour for filling, laying & spreadig base material of filter media i.e gravel of size 1st layer in bottom 20mm to 40mm upto depth 6cm, 2nd layer 12mm to 20mm upto 6cm depth, 3rd layer 6mm to 12mm upto 6cm depth and finally 3mm to 6mm upto 6cm depth.Note: (i) Proper size of gravel after sieveing through proper size of sieve shall be stacked for measurement purpose. (ii) stacked measurement before felling and after filling shall be measured and actual consume qty shall be measured and paid only. |
| 194 | Labour only filling, laying & spreading base material of filter media i.e old gravel of 20mm to 40mm, 12mm to 20mm, 6mm to 12mm and 3mm to 6mm in alternating layer as above all as specified and directed by Engineer-in-charge.Note: Filter Media retrieved from Sr, item 14 shall be stacked properly,stacked measurement shall be measured & paid in this item of schedule. |
| 195 | Material and labour for filling, laying and spreading of coarse sand of size 0.35mm to 0.6mm for filter media after above packing the gravel layers upto depth 15cm .Note: Proper size of coarse sand shall be stacked after sieving from proper size of sieve. (ii) Stacked measurement shall be measured before and after filling the coarse sand and actual consumed qty of coarse sand shall be paid only. |
| 196 | Labour only for filling, laying & spreading coarse sand of proper size 0.35mm to 0.6mm for filtter media after packing the gravel upto depth 15cm.Note: (i) Filter media retrieved from Sr. item No. 83.00 shall be stacked properly.(ii) Stacked measurement shall be measured before and after filling the coarse sand and actual consumed qty of coarse sand shall be paid only. |
| 197 | Material and labour for jointing, connecting, refixing of all the fitments like inlet, outlet washout and backwash pipe, valve, butterfly valve and inspection chamber etc in original situation/place of work high pressure filter unit all as specified and directed by Engineer-in-Charge. |
| 198 | labour only for restoring the filtered water supply through High Pressure filter unit and checking & ensure the filter water flow per hours as per capacity of fillteration plant in the presence of Engineer-in-charge incl all area near by High Pressure Filtration pump house to be neat and cleaned & also writing a letter or figure in block letters as cleaning date of filter media,name of contractor & capacity of filtration plant with synthetic enamel paint all as specified and directed by Engr-in-charge. |
| 199 | Dismantling/Taking out all the inlet,outlet,wash out & back wash pipe and necessary sluice valve,inspection chamber,from pressure filter (vertical cylindrical type) at swimming pool 14 GTC for cleaning of filter media & replacement of certain quantity of filter media all as specified & directed by Engr-in-Charge. |
| 200 | Material and labour for washing & cleaning of filter media with applying solution of cleaned water & approved detergent/chemical etc and including cleaned filter media such as gravel of different size and coarse to be stacked after sieveing the proper size of sieve as specified 20-40mm, 12-20mm, 6-12mm, 3-6mm & also coarse sand 0.35mm to 0.60mm for reuse at site including cleaning,scrubbing the internal surface of cylindrical pressure filter through wire brush & cleaning of complete filter media from approved solution of detergent/chemical & to make ready for filling the filter media all as specified & directed by Engr-in-Charge.Note: i) Stacked filter media shall only be measured & paid in respective item of schedule. |
| 201 | Material and labour for fitting,laying & spreading of base material of filter media ie gravel of specified size start from bottom Ist layer all as specified & directed by Engr-In-Charge.Note: i) all size of gravel should be sieved from proper size of sieve & stacked for measurement. ii) Stacked measurement shall be measured before & after filling the gravel. iii) Actual consumed qty of gravel shall be measured & paid only.Ist layer in bottom up to 7.5cm of size 20mm to 40mm, 2nd layer upto next 7.5cm depth of size 12mm to 20mm, 3rd layer upto depth 7.5cm of size 6mm to 12mm & finally4th layer upto 7.5cm of size 3mm to 6mm. |
| 202 | Labour only filling, laying & spreading base material of filter media i.e old cleaned gravel of proper size in alternating layers 20mm to 40mm & upto 3mm to 6mm upto depth of each layer 7.5cm all as specified and directed by Engineer-in-charge.Note: i) Stacked measurement shall be measured before & after filling the gravel. ii) Actual measurement qty of gravel shall be measured and paid only. |
| 203 | Labour only for filling, laying & spreading coarse sand of proper size 0.35mm to 0.60mm for filtter media after packing the gravel upto depth 20cm.Note: (i) Proper size of coarse sand shall be stacked after sieveing from proper size of sieve. (ii) Stacked measurement shall be measured befor and after filling the coarse sand and actual consumed qty of coarse sand shall be paid only. |
| 204 | Material and labour for filling, laying & spreadning of cleaned and dry fine sand for filtter media after laying the layer of coares sand i.e top most layer upto 20cm depth all as specified and dierected by Engineer-in-Charge.Note: (i) Stacked measurement shall be measured befor and after filling the fine sand. (ii) Actual consumed qty of fine sand shall be measured and paid in this items of schedule. |
| 205 | Material and labour for jointing, connecting, refixing of all the fitments like inlet, outlet washout and backwash pipe, sluice valve, and inspection chamber etc in original situation/place of work including necessary minor repair work all as specified and directed by Engineer-in-Charge. |
| 206 | Labour only for restore/filling the swimming pool with cleaned water through pressure filter for checking & ensure the flow of filtered water per hour as per capacity of pressure filter in the presence of Engr-in-charge including all area nearby pressure filter plant to be neat and cleaned & also writing in letters or figure in block letters as cleaning date of filter media & capacity of filtration plant with synthetic enamel paint all as specified & directed by Engr-in-Charge. |
| 207 | Material and labour for prepration of old painted surface of stell or iron external surface of pressure filter,all pipe line & valve inside the plant and painting of synthetic enamel ordinary paint over a one coat of red oxide primer all as specified & directed by engr-in-charge. |
| 208 | Material and labour for cleaning of water storage tank by removing sludge from the water reservior or storage tank and depositing the sludge away from the tank 200m distance and cleaning the water reservior all round the wall upto top level and floor through applying acid,bleaching powder and finally washing through fresh water including writing a letter in block letter with synthetic enamel paint on the wall,capacity of storage of water,date of cleaning,date of next cleaning,location of installation etc. complete all as specified and directed by Engr-in-Charge of the following capacity of water storage tank.Note: i) Cleaning work of each storage tank should be completed in only one working day.Contractor shall be informed to Engr-in-charge regarding restoring the evening supply of the water to affected area of station. |
| 209 | (a) 10 lakh gallon semi under ground RCC cylindrical tank (Near duty Coy W/S installation). |
| 210 | (b) 30,000 gallon RCC Rectangular tank (Near Old PAO (OR) KVR. |
| 211 | (c) 72,000gallon pressed steel Rectangular tank (Near Old Section Hospital). |
| 212 | (d) 10,000 litre capacity cylindrical tank 03 nos captain coloney W/S Installation. |
| 213 | (e) 50,000 gallon RCC cylindrical UG Sump (Radiana pump House). |
| 214 | (f) 40,000 gallon RCC cylindrical tank UG Pump (Radiana pump House). |
| 215 | (g) 30,000 gallon RCC Rectangular Sump (Radiana pump House). |
| 216 | (h) Water balancing cylindrical RCC UG Sump of 3.25 meter Dia,4.75 meter depth swimming pool Near officer Mess 14 GTC |
| 217 | (j) Raw Water storage tank of capacity 5000 gallons at Gambhar Pump House. |
| 218 | (k) Raw Water storage tank of capacity 10000 gallons at Gambhar pump House. |
| 219 | (l) Back wash water storage tank of capacity 35000 gallon at Gambhar Pump House. |
| 220 | (m) Clean water Rectangular tank Cap 100000 Gln |
| 221 | Material and labour for prepration of old painted brick stone,concrete cement plaster surfaces plain or moulded not exceeding 10cm width or girth when unconnected with other painting or when painted in a different tint with one coat of synthetic enamel paint over a one coat of priming paints plaster coated as specified and directed by Engr-in-charge.Note: i) Prior approval of color of paint should be obtained from Engr-in-charge before commencement of work. ii) All the static water storage tank should be painted. |
| 222 | Material and labour for prepration of old painted surface of steel or iron surface of any description over 10cm in width or with one coat synthetic enamel paint over a one coat of red oxide primer all specified & directed by engr-in-charge.Note: i) Prior approval of color of paint should be obtained from Engr-in-charge before commencement of work. ii) All the static water tank & rising main,outlet pressed overflow washout MS pipe should be painted. |
| 223 | Material and labour for dismantling, opening of unsv centrifugal pump motor set of capacity 7.5HP/10 KW KSB pump & motor crompton Greaves from,repair,rewinding & servicing of motor and pump from swimming pool at 14 GTC.Repair/maintenance/servicing of pump motor as under:-i) Opening of sunction and delievery line from pump and taken out pump shaft,gland plate, impeller and ball bearing etc. from pump hosing/body for repair purpose. Pump to be repaired/servicing by replacing unserviceable bearing , impeller, grinding/boring of pump shaft, greasing and filling/packing new glands etc.ii) Opening of motor for repair/rewinding of unsv motor incl. taking out rotor from stator, shaft, bearing etc. Taking out burnt winding from stator and rewinding the stator with new super enameled first class winding wireapprox. 5.5kg, varnishing and insulating the first class insulation material and replacement of unsv bearing of suitable size complete all as specified.iii) Repaired pump and motor to be refixed in the same situation/location and connecting all pipe line inlet and outlet incl commissioning and testingthe pump motor to the entire satisfaction to the Engr-in-Charge.iv) Old unsv material will be the contractors property under accounted in this item as credit of schedule. |
| 224 | Amount of credit of Rs. 169953.15 for retrived old material as mentioned in Schedule \"A\" section-II of tender document in pdf form, will be deducted offline while acceptence of tender. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
