Tender For Repair/ Replacement Flooring, Joinary, Plastering, Sanitary, Plumbing And Other Misc B/R Work In Otm Accn Of 505 Eme Bn And Cicgunder The Aor Of Age B/R-I Of Ge (North) Delhi Cantt-10; 1 Demolition of reinforced cement concrete (Reinforcement cut as required to facilatate demolition)of any description and in any position not otherwise specially provided complete all as specified and directed. 2 Demolition of plain cement concrete (unreinforced) of any thickness of any description and in any position not specifically provided for complete all as specified and directed. 3 M&L for non skid ceramic coloured tiles 7 to 8mm thick joint free area of each tile exceeding 0.11 sqmbut not exceeding 0.18 sqmas in floors over and including 15mm thick screed bedin cement mortar 1:6 set and jointedin neat cement slurry and pointed in coloured cement including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed. 4 All as per the description of srl item No 03 above but in vertical surface as skirting, dado and risers to steps over and including10mm thickrendering/backing coat in cement mortar 1:4 complete all as specified and directed. 5 M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.06 sqmbut not exceeding 0.11 sqmas in floors over 15mm thick screed bedin cement mortar 1:6 set and jointedin neat cement slurry and pointed in coloured cement. including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 6 M&L glazed ceramic coloured tiles in vertical surface area of each tile between 0.14 to 0.18 Sqm each set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in CM (1:4) and finished rough, complete including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 7 M&L 3D exterior designer coloured matt finished wall tiles 300x600mm design as approved over 10mm thick rough finishedrendering in cement mortar 1:4 including taking down and removal from site complete all as specified and directed. 8 M&L for vitrified coloured tiles shade as approved 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 1.0 sqm, in floors, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaceoverand including screed bed or bedding layers of mortars 15mm thick in CM 1:6,including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 9 All as per the description of srl item No 08 abovebut as in vertical surfaces such as skirting/ dado over and including 10mm thick rendering in CM (1:4). 10 M&L 20 to 25mm thick pre-polished machine cut Kota stone slab in repair as in flooring over and including 15mm thick screed bed in cement mortar 1:6, laid over cement slurry @ 3 Kg/Sqm and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge of slabcomplete all as specified and as directed. Note:- The size of Kota stone slab shall not less than 550mm x 550mm cut size in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above. 11 M&L 20 to 25mm thick pre-polished machine cut Kota stone slab as in repair of riser or vertical surface over and including 10mm thick rendering in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge where as specified and as directed. Note:- The size of Kota stone slab shall not less than 550mm x 550mm cut size as in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above. 12 M&L for reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in chajjas complete (reinforcement to be measured separately. 13 M&L reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete (reinforcement to be measured separately). 14 Mild steel TMT bars 6 to 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. 15 Formwork to sides and soffits of slabs n. exc. 200mm thick and similar works rough finished surfaces of concrete complete all as specified and directed. 16 Use and waste of formwork to chullah hoods, chajjas, throughs and similar items including edges complete all as specified and directed. 17 M&L for old size brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 including demolition of brick work complete all as specified and directed. 18 Taking down existing cementplaster or complete removal of existing pointing and finishes including racking out joints, hacking for key, scrubbing down with water etccomplete all asspecified and directed. 19 M&L 15mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on brick work on concrete surface of wall (external surfaces) finished even and smooth complete all as specified and directed. 20 M&L 15mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on brick work on concrete surface of wall (internal surfaces) finished even and smooth complete all as specified and directed. 21 M&L 15mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on brick work on concrete surface of ceilling surfaces finished even and smooth complete all as specified and directed. 22 M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. 23 M&L for preparing old decorated plastered surfaces of ceiling and applyingtwo coats of white wash complete all as specified and directed. 24 M&L for preparing new plastered surfaces of wall and applying two coats of oil bound distemper white or tinted over and including a coat of 2mm thick wall care putty and chalk whitingon plastered surfaces preparatory to distempering complete all as specified and directed. 25 M&L for complete removal of existing treatment and preparing old decorated surfaces of wall and applying two coats ofOil Bound Distemper over a coat of 1mm thick wall care putty complete all as specified and directed. 26 M&L for preparation of new plastered surfaces of wall and applying two coat of cement based paint over a coat of cement primer complete all as specified and directed. 27 M&L for complete removal of existing treatment of wall including cornices etc. by washing, rubbing down and stopping holes, with filling crack, making good uneven surface/broken corner of RCC members etc with water proof wall care putty or white cement and applying two coats of cement base paint over one coat of primer of approved shade complete all as specified and directed. 28 Dismantling wrought iron or mild steel work of any description not other wise provided complete all as specified and directed. 29 S&F steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections complete all as specified and directed. 30 S&F steel water tubes, medium grade, ISI marked, galvanised, 20mm bore with all fittings, fixed to walls and ceiling or laid in floorsincluding taking up or down steel tubing and connections complete all as specified and directed. 31 Refixing only old 15mm dia boresteel water tubing& connection in new or old positionfixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, tees, sockets, union, reducer, etc as requiredincluding taking up or down steel tubing and connections complete all as specified and directed. 32 Refixing only old 20mm dia boresteel water tubing& connection in new or old positionfixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, tees, sockets, union, reducer, etc as requiredincluding taking up or down steel tubing and connections complete all as specified and directed. 33 S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, ISI marked, double alyered hoisted and fixed in position including connecting up pipes including dismantling of PVC water tanks complete all as specified and directed. 34 S&F in repair 20mm gun-metal, globe or gate valves,with iron wheel head, screwed both ends for ironpipe and fixedcomplete all as specified and directed. 35 S&F ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic wall, screwed for iron pipe and fixed for 20mm bore size (Minimum weight 210gms), complete all as specified and directed. 36 S&F in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic wall, screwed for iron pipe and fixed for 20mm bore size (Minimum weight 210gms), complete all as specified and directed. 37 Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubings or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed. 38 S&FPVC (SWR) pipes single socketed in any lengthwith rubber ring joints fixed to walls/floor 75mm bore including demolition/ taking down PVC/CI drain/Rain water pipe complete all as specified and directed. 39 S&FPVC (SWR) pipes single socketed in any lengthwith rubber ring joints fixed to walls/floor 110mm boreincluding demolition/ taking down PVC/CI drain/Rain water pipe complete all as specified and directed. 40 S&F PVC (SWR) bends any radius, 75mm bore, complete all as specified and directed. 41 S&F PVC (SWR) bends with access door any radius, 75mm bore, complete all as specified and directed. 42 S&F PVC (SWR) bends any radius, 110mm bore, complete all as specified and directed. 43 S&F PVC (SWR) bends with access door any radius, 110mm bore, complete all as specified and directed. 44 S&F PVC (SWR) vent cowl, 75mm bore complete all as specified and directed. 45 S&F in repair 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 46 S&Fin repair soap dish disc (oval) type, mild steel chromium plated of approximate size 100mm x 50mm x 10mm,ccomplete all as specified and directed. 47 S&F in repair Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. 48 S&F in repair viitreous china premium/1st quality wash down water closet wall hung EWC white/ivory/off white (closed pattern incl seat cover and all necessary accessories like rag bolts/gel gasket etc, (excluding flushing cistern & flush pipe) complete in complete all as specified and directed. 49 S&F in repair vitreous china valveless, syphonic action type, flushing cistern, with dual flush bottons of capacity 10 ltrs low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed. 50 S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass self 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. 51 S&F in repair 75mmPVC (SWR) floor trap, plain with grating including jointing with solvent cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate mix with WPC complete all as specified and as directed. 52 S&F in repair tubular towel rail of brass chromium plated, 20mm dia, D type, 60 cm long between flanges complete all as specified and directed. 53 S&F in repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed. 54 S&F in repair bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm borecomplete all as specified and directed. 55 S&F in repair brass CP mixer/wall mixer for mixing hot & cold water screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore including connection pipe and fittings complete all as specified and directed. 56 S&F in repairs wall mixer with provn for over head showers with 115mm long bend pipe on upper side connecting legs and wall flanges. 57 S&F in repair 10 litre capacity PVC low level flushing cistern ‘ white’ with inlet, float valve including bracket with 32mm dia PVC waste/flush bend pipe appx 600mm long complete all as specified and directed. 58 S&F in repair PVC connection 600mm long and15mm dia with brass fly nut at both ends complete all as specified and directed. 59 S&F in repair vitreous china squatting pan, ‘orissa’ pattern, of size 580mm x 440mm white with integral foot rest, P or S trap complete including cement concrete bedding, outgoing flushing pipe, anti syphonage pipe etc complete all as specified and directed. 60 S&F in repair vitreous china wash down water closet pan (pedestal pattern) including trap, white including fixing bolts, flushing cistern and flush pipeconnection to trap and to flushing pipe in bend cluding provn of cement concrete beading complete all as specified and directed. 61 S&FEWC seat cover white colour as approved of PVC closed pattern with flat bottom and mild steel lchromium plated or aluminised hinging device complete all as specified and directed. 62 S&F vitreous china wash hand basin white, flat back of size 550mm x 400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32mm dia PVC waste pipe including fixing of tap, waste fitting etc complete all as specified and directed. 63 S&F in repair table top wash basin white, flat bottom size 525mm x 415mm x 140mm of make Jaguar Cat Part No JSD-WHT-25907N or equivalent as approved by GE excluding tap, chain, plug but including brackets, waste fitting 32mm dia brass chromium plated push type coupling with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed. 64 S&F in repairbrass chrome polished comfort height single-control operationallows hot and cold or mix both complete all as specified and directed. 65 S&F in repair chrome polished brass urinal spreader 15mm inlet with fixing stud make Cera cat part no F8070201as approved by GE with necessary fixing arrangement complete all as specified and directed. 66 S&F in repair CPstainless seel connection pipe 600mm long pemimum qualilty for Gyser, urianal, WHB etc complete all as specified and directed. 67 S&F in repair CP bottal trap, plug type with wall flange complete all as specified and directed. 68 S&F in repair vitreous china urinals bowl, half stall flat back large of size white with grating and union for discharge pipe complete including waste coupling provide and fixing plugs bedding urinal against wall in CM 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement including urinal spreader complete all as specified. 69 S&F 32mm dia bore low density polyethylene pipes (LDPE) of pressure rating 6kgf/cm2 fixed complete to walls,ceilings or in floors etc for WHB and sink complete all as specified and directed. 70 S&F in repair chromium plated brass angle valve concealed type for15mm bore pipe, fixed in repairs complete all as specified and directed. 71 Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed. 72 Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) all as specified and directed. 73 Taking down door shutters of any description exc 1 Sqm & n.exc 2 Sqm each complete all as specified and directed 74 S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ceosetory windows & other frames/ chowkhat of size 45mm x 70mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 75 S&F providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. Note:- Stainless steel butt hinges and necessary S.S screws shall be paid separately). 76 S&F 30mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebeated sash bars, anynumbers,beads for securing glass/ gauge complete all as specified in SSR Part-I (2009) section 8 clause 8.24 (a) and as directed. 77 S&F Aluminium window as per TD drg No. CEDZ/TD-316with following specifications :- (i)Outer frame of size40mm x 114mm with 1.3mm thickness, corner 45 degree cut & aluminium welded.(ii) Center mullion of size 40mm x 65mm.(iii) Welded shutter (02 Nos) of size 40mm x 60mm x 1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp with 5mm clear glass both side EPDMrubber gasket metal body hand lever type single point lock, aluminium kobra hinges 2 Nos per shutter.(iv) 12mm SS 202 grade round bar safety grill at 100mm cc distance modified to 150mm cc distance in front of handle, welded at both ends with 6mm SS 202 grade round bar.(v) Welded wiremesh shutter (2 Nos) of size 40mm x 18mm x 1.3mm thickness 45 degree cut with 0.45mm nominal dia of SS wire mesh, SS 75mm long hinges & PVC magnet. (vi)Entire window shall be powder coated with pure polyster coat of any shade as approved by GE.(vii)Window shall be installed with silicone complete all as specified and directed by Engr-in-charge. 78 S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm, fixed with stainless steel wire staples, wooden beads, tinned tacksto steel windows and wooden doors shutterscomplete all as specified and directed. 79 S&F flush shutters 35mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides with leaping and beading complete all as specified and directed. 80 S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified 81 S&Froller blinds premium korean fabric/zebra roller blinds or as approvedto windows/openingincluding top and bottom frame/rail complete all as specified and directed 82 S&F powder coated of any colour aluminium door shutters, aluminium section weighing 0.55 kg/m incuding necessary joining cleats, glazing clips, ruber neoprene packing handles 2 Nos, tower bolt in each door shutter, hinges powder coated aluminum snap beading screws etc, complete all as specified and directed. 83 S&F powder coated of any colour aluminium window and ventilator shuttrs, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing anodised aluminium snap beading screws etc complete all as specified and directed. 84 Mild steel conforming to Fe 410-0 or Fe 310-0 in framed work such as grills, gratings, door frameetc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete all as specified and directed. 85 S&F mild steel, plain, black sheetof 1.60mm thick in wall cladding steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up mitred angles etc as required complete all as specified and directed. 86 Taking down/dismantling old particle board or any board kitchen cabinet with wardrobe including fillets and making good distucomplete all as specified and directed complete all as specified. 87 S&F factory made 18mm thick 100% solid WPC ( Wood polymer Composite) laminated board of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), calcium carbonate and natural fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives, made from Extrusion process WPC foam sheet. single extruded (Inner) with having minimum density not less than 650 kg/cbmhaving good screw holding capacity (screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), minimum compressive strength of 50 N/mm2 , Modulus of elasticity 850N/mm2and resistance of spread of flame of class A category with property of being termite/ borer free. water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws. All as per direction of Engineer -In-Charge, material test certificate and authentication should be compulsory provided by the manufacturing company: For WC/Bathroom/Toilet/Kitchen and Cabinets. 88 “S&F factory made 18mm thick 100% Solid WPC ( Wood polymer Composite ) plain board of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), calcium carbonate and natural fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives, made froms extrusion process WPC foam sheet single extruded (Inner) with density not less than 650 kg/cbm certified company, having good screw holding capacity (Screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850N/mm2and resistance of spread of flame of class A category with property of being termite/ borer free. water/ moisture proof, fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company: For WC/Bathroom/Toilet/Kitchen & Cabinets.” 89 S&F magnetic catches with steel body ‘H’ type, fixed to shutter complete all as specified and directed. 90 S&F continuous (piano) hinges of width 30mm when open flap) , mild steel, bright finish or electrogalvanised complete all as specified and directed. 91 S&F floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140mm complete all as specified and directed. 92 S&F 100mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. 93 S&F 4 levers brass cupboard locks grade-I, size 65mm complete all as specified and directed. 94 S&F150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. 95 S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. 96 S&F butt hinges, 100mm size medium weight, cold rolled mild steel complete all as specified and directed. 97 S&F aluminium handles 150mm size cast type, anodised complete all as specified and directed. 98 S&F 300mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed. 99 S&F stainless steel chromium plated tubing of 25mm dia curtain rod fancy type including fancy type CP brabs brackets (wall to wall or flush to wall) with finials or end caps decorative type as approved by GE for securing to curtain rod to wall in position, fixed in repair complete all as specified and directed. 100 M&L applying two coats of synthetic enamel paint on newwooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed. 101 M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed. 102 M&L for two coats of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise described over 10cm width or grithcomplete all as specified and directed. 103 M&L for two coats of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise described over 10cm width or grithcomplete all as specified and directed. 104 M&L for 40mm thick Plain Cementconcrete type B-1, 1:2:4 (20mm graded aggregate) as in floors and finishing cementconcrete surface even and smooth with using extra cement. 105 M&L for plain cement concrete M-10, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 75mmthick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified & directed. Note:- The unit rate include for use of form work (straight or curved). 106 Removing of existing water proofing membrane, damage plaster, vegitation/plants, PCC, mud fuska, brick tile,Tar-felt,loose particles and all forgin materials over the roof and removal of debris from site to out-side area complete all as specified and directed. 107 M&L clearing all the dust, existing roof treatment and loose material by brush/blowe/ grinder including removing of vegetation/ plantation from the surface. M&L for preparation of roof top surface, providing and applying single component elastic cold applied polyurethane modified acrylic roofing system, co elastic technology (CET) based on modified polyurethane and fully fibre reinforced, having sun reflectivity index (SR) of 109 on top of concrete roof surfaces. All cracks up to 3mm at corner joints, chaneel and parapets should be treated with crack seal. Applying three coats including one coat of primer of shali urethane BTD / sikalastic 560 / smart care damp proof-ultra having coverage @ min 0.75kg/ m2 and dilution up to 10% and laying reinforced fiber net nd applying two coats (without dilution) of shaliurethane BTD/ sikalastic 560 / smart care damp proof ultra @ total consumption 2 kg/ m2 in two coats for shaliurethane BTD/ sikalastic 560 / smart care damp proof ultra @ total consumption 2 kg/ m2 in two coats for maintaining minimum dry film thickness 1.5mm and elongation at break of free film of approx 350% The materils shall be applied with brush or roller, complete in all respect as per the direction of Engineer-in-Charge/ consultant Note:- 6 Hrs interval between two coat will be maintained. All auxiliary and accessories involved during application should be supplied by single manufacture as a part of system. Make STP/Sika/ Asian paint or equivalent as approved by GE, Note:- Application of water proofing treatment will be done by authorised applicator only. (i) The water proofing treatment shall be carried out by the manufacture or their authorized applicaiton duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years. However contractor may deposit the FDR of same amount in favour of GE. If Contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. The contractor quoted rates for this item shall deemed to be inclusive of this aspect. 108 M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in string courses copings or as floors complete all as specified and directed. 109 M&L for preparation of new or old plastered surfaces of wall with filling crack, making good uneven surface/broken corner of RCC members etc with water proof wall care putty or white cement and applying two or more coat of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surface. 110 Providing & fixing false ceiling with semi perforated 12mm thick micro tegular edged at all heights with GRG (glass fibre reinforced Gypsum ) false ceiling tiles of size 595mmx 595mm of approved texture, design and pattern having moisture content less than 2% , humidity resistance of 99% ,NRC0.50to 0.75 as per IS 8225:1987 , Non combustible as per BS 475 (part-4)-1970 and light code Description unit rate No. 429 SUB HEAD : 26.0 NEW TECHNOLOGIES AND MATERIAL reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 gms per sqm including both sides ) comprising of main-T runners of size 15x32mm of length 3000 mm,gross-T of size15mm x 32mm of length 1200 mm and secondary intermediate cross-T of size 15mm x 32mmof length 600mm to form grid module of size 600mm x 600mm, suspended from ceiling using galvanised mild steel items (galvanising @ 80 gms per sqm ) i.e. 50mm long , 8mm outer diameter M-6 dash fastners , 6mm dia fully threaded hanger rod upto 1000mm length and L shaped level adjuster of size 85 x 25 x 2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fxed on perimeter wall/partition with the help of plastic rawl pluhs at 450mm center to center and 40mm long dry wall screws . the work shall be carried out as per specification, drawing and as per direction of the Engr-in-charge. 111 Taking down brick tiles,terracing tiles or single layer APP from roof laid, beddedand pointed in any mortar complete all as specified and directed. 112 Demolition of mud phuska/cement concrete in roof any thickness, including plaster and leaping/whether full thickness removed on only a part there of complete all as specified and directed. 113 M&L roughening surfaces of old concrete surfaces by picking sweeping, cleaning old surface and washing down with water to remove dust etc. 114 M&L cement concrete type B -1, 1:2:4 (20mm graded aggregate as in padding over roof complete all as specified and directed. 115 M&L15mm thick screed in CM (1:3) finished even and smooth mixed with water proofing compound (WPCshall be measured and paid separately) complete all as specified and directed 116 M&L for water proofing treatment on roof slab consisting with following operations:- (i)Existing surface shall be cleaned of all dust, fungus, moss and other foreign material etc by using wire brush & dusting, Apply a layer of bituminous primer conforming to IS 3384 @ 0.4 Lit/Sqm on the surface.Laying 3mm thick APP membrane having non-woven polyester matt at core and under surface coated with plastic polythene film.Laying shall be done using butane torch maintaining 100mm side overlap & 150mm end overlap, sealling all overlaps complete including treatment at all junctions & corners over a coat of hot itumen 85/25 @ 1.2 Kg per Sqm over primer.The membrane shal be tucked into groove on vertical plane and groove sealed with cement mortar.The treatment shall be provided upto 200mmheight above finished floor Note:- The membrane shall have tensile strength of 700N/5cm in longitudinal direction and 450N/5cm in transverse direction at 23 degree celcius, Flow resistance>120 degree celcius, dimensional stability, < 0.5% when tested as per ASTM D 5147.The laying of the membrane shall be done through authorized applicator of the manufacturers(ii) Again applying hot bitumen 85/25 @ 1.2 Kg per Sqm over water proofing membrane.(iii) Dusting dry sand @ 0.75 Kg per Sqm and applying two coat of silver paint over the membrane.(iv)Prepration of surfaces and applying two coat of aluminium solar reflective paint of complete surfaces. 117 M&L for clean the wall, roof, chajja and beam surfaces by removal of groth plant and injecting with chemical glyphosphate solution (4% concentration) @ 20ml or till refuse by cutting or injection in stem of plants and roots at 30mm. The area shall then be sprayed with solution 25ml glyphosphate (4% concentration) diluted with 1ltr of water.The size of block considred as whole bldg. All roots of plants shall be removed completely and making good the disturbed surface and painted with cement base paint or acrylic paint with necessary scaffolding all as specified and directed. 118 Disconnecting existing overhead tanks, setting aside or lowered if required for repairing, cleaning etc and hoisting if reqd reconnecting and refixing in positionbut capacity exceeding 250 litres and not exc 500 litres complete all as specified & directed. 119 Disconnecting existing overhead tanks,setting aside or lowered if required for repairing, cleaning etc and hoisting if reqd reconnecting and refixing in positionbut capacity exceeding 500 litres and not exc 1000 litres complete all as specified & directed. 120 M&L for Cleaning and removing all scale and dirt, etc from PVC tanks of capacity exc 250 & n exc 500 ltrs and from mouths of circulating pipes etc complete all as specified and directed. 121 M&L for cleaning and removing all scale and dirt, etc from PVC tanks of capacity exc 500 & n exc 1000 ltrs and from mouths of circulating pipes etc complete all as specified and directed. 122 S&F in repair 15mm bore bib cockbrass CP alloywith long thread,with long body, wall flangescrewed for ironpipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified and directed. 123 S&F in repairs snow white vitreous china EWC single peice type 700mm x 370mmx 645mm including seat cover and flush fittingscompletefixed in floor with brass screw complete all as specified and directed. 124 Dismantling of Plain or corrugated AC / fibre sheeting of any guage as in roof covering includingridges/gutters etc of any description straight or curved at height upto 15 mtr complete all as specified anddirected. 125 M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws at height upto 15 mtr complete all as specified and directed. 126 Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground , complete all as specified anddirected. 127 Excavation in post hole or similar holes each n. exc 0.50 cum in hard/dense soil and getting out returning filling in ramming earth or broken rubble mixed earth around a layer of n.exc. 25 cm complete all as specified and directed. 128 S&F steel work in tubular trusses Fe 410-W (Gde-E-250) quality A including special shaped washer etc.Complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 129 M&L granite 18-20mm thick colour as approved ( of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platformslike in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed of granite over 15mm thick screed bed in cement mortar 1:6)including moulding, polishing the edges including dismantling complete all as specified and directed. 130 S&F aluminium powder coated three track window (two shutters glazed & one shutters wire gauge) with frame, glazed with 4mm thick tinted glass and wire guage with stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below:-(a)Frame (top & side) section shall of size 92.00 x 31.75 x 1.50mm. (Section No 21447)(b)Frame (bottom) section shall of size 92.00 x 31.75 x 1.50mm. (Section No 21446)(c)Top & side members of shutter section shall be of size 18.00 x 40.00 x 1.50mm. (Section No 21455)(d)Interlock Section of Shutter shall be of size 18.00 x 40.00 x 1.50mm. (Section No 21454)(e)Bottom Members of shutter section shall be of size 18.00 x 40.00 x 1.50mm. (Section No 20844) 131 Providing and fixing 4mm thick aluminium composite panel exterior grade (0.5mm PVDF coated aluminium skin on top & bottom plus 3mm thick polyethylene core) on/all-round RCC/Brick column/wall/fascias/M.S. section/aluminium section structure/dead walls/under side sky light upto all heighs in required colour/pattern & panel size as (area of panel shall not more than 0.60Sqm per drawing fixed on aluminium extruded standard tubular section of size 38 x 25 x 1.6mm of approved make (Jindal/Hindalco/Indalco) conforming to IS;733 and IS; 1285, fixed at 600m center to center with rawl plugs and screws or with fixing clips or with expansion hold fasteners aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle CP brass/stainless steel screws, with 12mm (wide) x 20mm (deep) groove in joints or lpanels including filling the joints with weather silicon sealant of dow coming 789 or equivalent of approved colour inacp ACP, weather sealant structural sealant/adhesive tape, masking primer /Gasket /Foam /Scaffolding /cluding 10mm dia backer rod,The rate shall include cost of ACP Panel, subframe of aluminium section for fixing of ACP, weather sealant structural sealant/adhesive tape, masking tape primer/Gasket/Foam/Scaffolding/ Aluminium cleats with screws complete including making openings as required at site like electical fittings, recess for pipe etc, all anecessary tools and plants, scaffolding and as per manufacture technical specifications, including dismantling complete and as per the direction of the Engr-in-Charge (Surface area of aluminium composite panel shall be measured for payment. 132 S&F 10mm thick toughned frosted glass for frame less door shutters of size area exc 1.50 Sqm but n.exc 3.00 Sqm each including fixing of double action floor door spring hydraulically regulated, and fixed with pivote on top including CP fittings and fixtures, CP handles hinges. CP locking with necessary fittings cutting & holes moulding of each shutters and fixed in position complete all as specified and directed. 133 M&L WPC acoustic wall panelling of approved colour for indoor/outdoor wall 100% nontoxic non feraldelyers, water proof, termite proof anti-UV using necessary SS clip/fixing arrangement including corner patti or molded beading of same materials including dismantling of pannels complete all as specified and directed. 134 S&F in repair double action floor spring hydraulicallyregulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass other parts made of mild steel heavy duty complete all as specified and directed. 135 S&F in repair door closer hydraulically regulated, dluminium (die cast) body designation No 3, universal type suitable for door shutters of 851mm to 1000mm width and of weight between 61 to80 kg complete all as specified and directed. 136 M&L for water proofing treatment walls of bathroomconsisting of thefollowing operation including demolition/taking down old treatment :-(i) Cleaning of surfaces by wire brushing brooming removing dust particles (ii) Filling of all brick joints with cement mortar 1:4 (iii) Applying a coat of acrylic cementitious water proofing chemical as approved.(iv) Applying fiber mesh setting with SBR (styrene butadiene rubber) lates.(v) Final coating with acrylic cementitious water proofing chemical and sprinking of sand. 137 M&L for water proofing treatment sunken floor of bathroomconsisting of thefollowing operation including demolition/taking down old treatment :-(i) Cleaning of surfaces by wire brushing brooming removing dust particles (ii) Filling of all brick joints with cement mortar 1:4 (iii) Applying a coat of Acrylic Cementitious water proofing Chemical as approved.(iv) Applying fiber mesh setting with SBR (Styrene Butadiene Ruer) lates.(v) Final coating with Acrylic Cementitious water proofing Chemical and sprinking of sand. 138 M&L for broken bricks in sunken of gauge n exc 63mm deposited spread and levelled in layers n exc 15cm thick hand rammed to a true surface complete all as specified and directed.
