PROVN OF 125 KVA DG SETS FOR MULTIPLE BLDGS IN F ZONE, PROVN OF AIR CONDITIONER (AC) FOR TECH SECTIONS IN I ZONE, PROVN OF 07 X DEEP FREEZER (320 LTRS CAPACITY) OF 50 COY ASC (SUP) TYPE C, PROVN OF 40 X WALL MOUNTED FANS FOR VARIOUS BLDG (SINGLE MEMBER BK) IN ‘H’ ZONE, PROVN OF 08 X GEYSERS IN SINGLE JCOS ACCN OF BLDG NO P-473 IN ‘E’ ZONE, PROVN OF FALSE CEILING PANEL LIGHTS IN BLDG NO T-76, TU-10, T-105, TU-09 & T-100 IN ‘H’ ZONE, PROVN OF MODULAR CHIMNEY FOR OR MESS AT BLDG NO T-129 IN ‘C’ ZONE AND PROVN OF FIVE NUMBERS OF 25 LTRS GEYSERS IN BLDG NO P-714 (JCO MESS) AT RMS; 1 Supply, Installation, testing and commissioning sound proof acoustic enclosurediesel engine driven generating set, fully wired 415 volts, +/- 1.5%, 3 phase 4 wire 50 HZ, +/- 0.5% complete with relay panel and switch gears for automatic starting on main failure, control panel having meter and sound proof canopy as per CPCB -IV+ norms and foundation etc. of capacity upto125 KVA with AMF panel, Diesel engine set as per ISO 8528-1, IS 10000,IS 10001 and alternator as per IS-13364 with inbuilt electronic speed governer with micro processor based control panel with floor mounted fuel tank not less than 12 hours running capacity including necessary anti vibration pads including standard control panel as recommended by the manufacturer . Note:- Rates for AMF panel suitable for 125 KVA DG Set,Plinth/ foundation as per manufacturer manual and rates for commissioning and testingare inclusive in quoted rates. 2 Item 1.00 contd..(a) (i) Fly wheel to suit coupling (ii) Flexible coupling with guard, bolts and nuts,etc.for exhaust system (iii) Dry type air cleaner filters (iv) Radiator with guard and radiator fan (v) Fuel pump complete with fuel injection systems(vi) Electronic speedgovernor (vii) Fuel filter (viii) Lub oil filter(ix) Self starter 24 Volts DC(x) Exhaust silencer industrial type with pipe 3 m long (xi) Turbo charger (xii) Lub oil pump(xiii) Lub oil cooler assembly(xiv) Alternator 24 V for charging of battery (xv) One hand rotary type fuel pump connected with heavy duty pipe upto the tank(xvi) Instrumental panel with the following:- (aa) Self starting key and switch(ab) Lubricating oil pressure guage (ac) Battery charging ammeter(ad) Hour meter and RPM indicator(ae) Lub oil temp guage(af) Water temp guage (xvii) Control panel with MCCBas per OEM- 1 No (xviii) Emergency stop push button outside of the container/ Canopy. 3 item 1.00 contd..(b) Alternator:-It shall be self excited self generated balanced 415 volts, 3 phase, 50 Cycles per second,125 KVAat 0.8 PFor nearest in higher capacity, 1500 RPM, star connected, 4 wire, drip proof enclosure, air cool with radial fan mounted on rotor, screen protected, self ventilated enclosure as per ISO 8528-1, IS 4722/IS 2613 & IEC 34.10 or latest IS code and with drip proof enclosure with damper winding on pole faces, static automatic voltage regulator to provide voltage regulation +/-1% and harmonic factor better than 2% from no load to full load from 0.8 to unity power factor, efficiency 92% at 100% load/0.8PF, voltage drop at full load ≤ 20% and insulation of H class and above as per standard practice of OEM(c) Starting batteries 24 V, 180 AH maintenance free with suitable size of cable including fitting and terminals on angle iron frame(self starter sytem with 24 volt DC) - 01 NoMake Exide/ Amaron/Nicco/ Amco.(d) Fuel tank: Made of 1.6 mm thick CRCA sheet and having continous running of 12 hours at full load with level indicator to indicate the oil level of diesel tank, fuel strainer air vent inlet and out let connections with MS pipe of suitable size complete all as specified and as directed. 4 item 1.00 contd..(e) Sheet steel components pre-treated with zinc phosphate prior to polyster powder coating (f) Zinc plated or stainless steel fasteners (g) EPDM quality gasket(xix) Provison of light inside the canopy. (xx) Radiator filling access facility from out side(h) Engine and alternator shall be mounted through AVM Pads on common channel iron base frame.(j) Noise level, less than 75db (A) at 1 mtr distance controlled by providing specially designed alternator to controlled the sound at air entry and exit of the enclosure.(The make of Acoustic enclosure shall be OEM of DG Set)(Foundation: Cost of PCC foundation as per manufacturers instructions shall be deemed to be included in the Quoted rate) 5 item 1.00 contd..AUTOMATIC MAINS FAILURE (AMF) CONTROL PANEL: factory made cubicle type floor mounted LT panel board, outdoor kiosk type made out of MS angle not less than 50 x 50 x 5mm , and 3.15 thick MS CRCA sheet, fron opening type, protection class IP-65, dust, weatherproof and vermin proof duly powder coated after seven tank process, with elecctrolytic grade copper bus bar of 400 Amps capacity for three phase and neutral, with all standard switch gear such as power contactors, relays etc. and protection , internal wiring of adequate size PVC insulated multistranded copper conductor cable etc and also consisting of following:-(a) MCCB 415 Volts, 250 Amp, rating 4 pole 16 KA rupturing capacity, Microprocessor based release for incoming supply with overload, short circuit and earth fault protection-02 (Incoming from commercial and stand by supply) with suitable size of conntector and standars relays etc.(b) Ammeter 0-100 Amps, 96x96 mm square dial flush type ISI marked with selectyor switch 3 way-01 set(c) Voltmeter 0-500 volts 96x96 mm square dial flush type ISI marked with rotary selector switch 3 way -01 set.(d) Phase indicator lamps (R-Y-B)- 1 set.(e) Frequency meter digital type 45 to 55 Hz-1 No(f) KWH Meter 3 Phase unbalanced load1200 Amps capacity incl CT coil-1 set(g) All standard relays, circuits and protection required for automatic operation of Gen Set. 6 Supply, laying, jointing and testing and commissioning 120 sqmm, 3.5 core XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor andPVC sheathed LT cable 1100 volts grade conforming to IS-7098 laid in trenches/ ducts/ fixed on poles/wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by Engineer-in-Charge. 7 Excavation in trenches, n exc 1.5 m wide and depth exc. 1.50 m but n.exc 3.00 m ; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil etc complete all as specified and as directed. 8 Returning, filling in, of soil including spreading leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed . 9 Removing exvated material to a distance n.exc 50M and deposited/ spreaded where directed at a level n. exc 1.5 M above the starting point completeall as specified and as directed . 10 Materials and labour for sand filling around the cable with approved quality coarse sand for sand cushioning under ground cableincludingspreading and punning down to 23cm thickness complete all as specified and as directed.NOTE: Punned down thickness shall be measured and paid. 11 Materials and labour for brick protection cover to underground cables with sub class ‘B’ well burnt brick of size 23 X 11.5 X 7.5 cm, (locally available best quality), laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and as directed. 12 Supply,installation and testing and commissioning of Split type inverter Air conditionerof capacity 1.5 ton rating 5 star with cordless remote operated on 230 Volt AC supply complete to wall with suitable bracket for indoor outdoor unit and connected with electric suply, testing on full load complete all as specified and as directed.Note:-the rates are inclusive of copper pipe, drain pipe etc 13 Supply and fixing Voltage stablizer for automatic operation single phase indoor type and designed for input variation between 160-260V ISI marked volts with digital disply out put voltage stablizer at 230 Volts with energy of± 2.5 % and of capacity 4 KVA complete all as specified and as directed. 14 M&L for sub main wiring complete with two runs of4.00 Sq mm and one run of 4.00 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- Two runs of 4.00 Sq mm + one run of 4.00 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length 15 M&L for sub main wiring complete with two runs of6.00 Sq mm and one run of 6.00 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- Two runs of 6.00 Sq mm + one run of 6.00 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length 16 S&F metal clad AC socket point single pole and neutralenclosure with a tow pin and earth plug and socket complete with one single pole MCB SP 20 Amps complete all as specified and as directed. 17 S&F MCB Distribution board double door type SPN 4 way with 200 amps rated bus bar, sheet steel, powder painted, withneutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed. 18 Supply and fixing MCB SPN 32 Amp rating 240V, 10KA C curve miniature circuit Breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. 19 S&F MCB Distribution board double door type SPN 8 way, sheet steel, powder coated, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed. Note :MCB SPN/SP will be measured and paid separately.M 20 S&F MCB SP 6 to 32 Amp rating 240V, 10KA C curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. 21 S&Fand testing factory made sheet metal enclosurefor MCB DB TPN 4 way 415 volt with double door, IP - 43 protectionduly withfixed in wall/ concealed in wall complete and making good disturbed surfaces of wall, floor etc including electric wire connectionall as directedby Engineer-in-Charge. 22 S&F MCB triple pole and neutral 415 volts 63 amps, with rupturing capacity 10 KA, B curve type, with over load and short circuit protection complete all as specified and as directed. 23 Supply, installation, commissioning of Glass Top Deep Freezer 320 litre capacity,single phase 240 volt, 50 Hz suitable to working on AC 220 Volts (+/-) 12%, 50 HZ, CFC free Regrigerant, wtih miniumum 3 Star rating with ISEER as per latest Ministery of Power notification ,complete all as specified and as directed. 24 M&L for Point wiring complete with two runs of 4 sqmm single core PVC insulated FR-LSH cable1100 volts grade with multi-stranded copper conductors, drawn throughand including PVC double locked Casing & caping including provision of 4 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connecting to earth dolly, including PVC rectangular box for mounting switches/sockets/regulators etc of suitable size as required at site and 50 mm deep complete all as specified and as directed. 25 M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable1100 volts grade with multi-stranded copper conductors, drawn throughand including PVC double locked Casing & caping/conduit including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc.of suitable size as required at sitecomplete all as specified and as directed. 26 Onelight/Fan point controlled by one, one way switch . 27 One 3 pin socket outlet 5 Amps on the Independent board. 28 M&L for Point wiring complete with two runs of 2.5 sqmm single core PVC insulated FR-LSH cable1100 volts grade with multi-stranded copper conductors, drawn throughand including PVC double locked Casing & caping including provision of 2.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. of suitable size as required at site complete all as specified and as directed. 29 Material and labour for (concealed Type) point wiring including necessary chases cutting of wall for one light/fan/call bell point with 2.5 sqmmPVC insulated (FR-LSH) PVC sheathed multistranded copper conductor cable 1100 volts gradecontrolled by one way switchincluding 2.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC conduit with all accessoriesand sunk GI box for mounting of fittings like switch, socket and fan regulator etc on 3 mm thick hylam sheet and making good the distrubed surfaces as per the existing complete all as specified and as directed by the Engr-in-ChargeMake:- Finolex/Richa/RR KabelMake of caping/casing & PVC boxes :- Prestoplast/Finolex/supreme/Richa 30 S&F Switch piano flush type single pole, one way 5A complete all as specified and as directed. 31 S&F ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and directed. 32 S&F Switch socket combination 2 in 1, 5Aflush type complete all as specified and as directed. 33 S&F Switch socket combination 2 in 1, 5A/16A, 5 in 1 flush type complete all as specified and as directed. 34 Supply and fixing LED luminaire 600 mm x 600 mm, 40/42 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling and connecting up with driver, three core flexible copper conductor of suitable size complete all as specified and as directed. 35 Supply and fixing Wall mounted fan 400 mm sweep PP Blade and thermal overload protection for long lasting motor power consumation 58 Watt fan motor speed 1330 RPM Air dilivery 85 (CMM) with accessories complete all as specified and as directed by Engr-in-Charge. 36 Supply, installation, testing and commissioning commercial type wall mounted electric chimney made out of 16 SWG (304) stainless steel with front turned down, angular frame work fully welded with the following items complete all as specified and as directed. :-(i) Chimney box of size 72 inch (L) x 32 Inch (B) X 22 Inch (H)(ii) Ductin box as site requirement(iii) One No 18 Inches Heavy Duty Exhaust Fan including Fan box of size22 Inch (L) x 22 Inch (H)approved Make in MES.(iv) Misc Civil works such as breaking of existing slabs, plaster and repairing of slabs, matching surfaces with existing one etc(vi) Transportation 37 S&F DBOXx (With Sheet Steel Enclosure) 20 Amp MCB protected socket Complete all as specified and as directed. 38 Supply, Fixing and testing of vertical type wall mounted storage water heater of Capacity 25 Ltrs BEE 5 Star rated or minimum Standing Loss of 0.511 kWh , 240V, 50Hz with Maximum power consumption of 2KW , dry powder fero glass line coating technologyfor inner tank with incoloy heating elementwith minimum4 years warranty , ABS outer body , 2 units of PVC connection pipe with length of 450mm length for hot and cold water supply with complete Accessories complete all as specified and as directed. 39 Supply and laying tubes Medium grade galvanised GI tubing with all fittings, fixed complete to walls/poles/laid in floors/trenches/road crossing of size 15 mm dia bore complete all as specified and as directed. 40 S&F Stop valves, cast copper alloy, fancy type, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.: Make : Jindal/Prakash surya/TATA 41 S&F15mm boreBib tap fancy type chromium plated with long shank complete all as specified and as directedMake: Jindal/Prakash surya/TATA 42 Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised strip of 25 x 4 mm sizeby means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 40mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) completeand accessories including testing on completionall as specified and as directed. (Note: Earth strip upto a length of 7.50 m from earthplate shall be deemed to be included in quoted rate.) 43 M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed. NOTE:- (i)The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1 chamber, CI cover 10 mm thick, funnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 389 of MES SSRPart-II. (ii)Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately.
