}

Tender For Supply, Erection, Testing & Commissioning Of 03 Nos 16 Mtr Led High Mast Lighting System With 08 Nos. & Cabling Work At Nmy Mirzapur - Supply & Fixing Of 16 Mtr High Mast Shaft Of Approved Make With Rising System Hot Dip Glavanized Inside & Out, varanasi-Uttar Pradesh

Tender Notice

52086729
Tender For Supply, Erection, Testing & Commissioning Of 03 Nos 16 Mtr Led High Mast Lighting System With 08 Nos. & Cabling Work At Nmy Mirzapur - Supply & Fixing Of 16 Mtr High Mast Shaft Of Approved Make With Rising System Hot Dip Glavanized Inside & Out
Tender
Indian
Uttar Pradesh
Varanasi
14-11-2025

Tender Details

Tender For Supply, Erection, Testing & Commissioning Of 03 Nos 16 Mtr Led High Mast Lighting System With 08 Nos. & Cabling Work At Nmy Mirzapur - Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mmbase plate 32 mm thik suitable for wind velocity as per IS 875 part 3 &having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. 21.3.1 2 Supply and fixing of single unitled aviation obstructionlight complete with transformer and LED spiral etc complete in all respect. CAT AA409 3 Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 25A TPN 807e(ii) 4 Supply and Wiring of submains with 04 nos. of 4 sq. mm.FRLSH PVCinsulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of allmaterial labour and T&P required for proper completion of the work as directed at site by Engineer in charge. 289(c) 5 Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing.Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.725(b) 6 Supply and fixing ofintegral LED flood light luminaires with die cost aluminium houghing with toughend glass UV steplized PC cover and lenses Volte with mandatory driver set suitable for 170 watt to 200 Watt. Confirming to IP 66 and IK 07 and above protection complete in all respect. including lobour. CAT- AAA20400-24000 system lumenus high power LED with lenses >120Lm/W, PF>0.95, THD<10% at full load, CRI>70, potted driver set in metal housing non circuitory phase to phase protection at 440 V > 300V Over voltage auto cut and restart fealure, 4 KV internal surge protection, with 5 years warrantee. 23.26 7 Supplyandlayingof aluminiumconductorPVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16 sq. mm 4 core 20c.1.9 8 Supplyandlayingof aluminiumconductorPVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.50 sq. mm 3-1/2 core20a.1.9 9 Supply and layig of 100mm GI pipe medium B class. 14.13.3 DSR 2022 10 S&F of 200 A. 415 VMetal clad TPN CFS complete with HRC fuse etc. on angle iron frame complete in all respect. 354 11 S&F of 200 Amp. four pole change over switch on 50mm x 50mm x 6mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge. 379 12 S&Fof 100 Amp. 415 V metal clad TPN HRC type switch fuse unit complete with HRC fuse on angle iron bracket complete in all respect. 328 13 Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCBs (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mountedon non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCBs shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. Incoming. 630Amp MCCB-1 No outgoing.100Amp MCCB- 5 No & 63Amp MCCB- 2 NoCAT-B Pannel Cubical type814a(ii)

Key Value

Document Fees
INR 3600 /-
EMD
INR 197900.0 /-
Tender Value
INR 19.78 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail