Providing And Fixing Of 04 Nos Prefab Toilet Block 04 Nos Bath And 05 Nos Wc Having Out Side Size 7.320 M X 4.88 M Including 50 User Septic Tank And Plinth For Toilet At Karahalli Campus Under Stc Bsf Bangalore Sh E I And Service Cable Connection; 1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group A 2 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. A) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 3 Wiring for light/ power plug with 2X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing as required. 4 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. 5 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 6 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. 7 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. 8 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way , Double door 9 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning and dismantling the existing etc. as required. a) Single pole 10 Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (i) 63 Amps 11 (ii) 40 Amps 12 Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV/HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. 13 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (i) 2 x 25 sqmm (22 mm) 14 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (i) 32 mm dia 15 Providing and fixing of Exhaust fan 300 mm Heavy duty Metal body with louvers, fasteners including cuttinghole in the wall, connection, testing and commissioning etc as reqd. cat no. FHVVEMTDBB12(Havells) or equivalent model & specification of Havells/ Orient/Bajaj/ Crompton make 16 LED Batten light (System lumen efficacy ≥105 <120 lm/Watt). Supplying, Installation, Testing & Commissioning of LED surface mounted Batten light of following body materialand construction as per IS : 10322 with driver (Replaceable)as per the requirement with Driver efficiency >85%, Operating voltage AC 140 270 Volt,frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KVwith Short & Open circuit protection, THD < 10%, P. F.≥0.95, IP20,CRI>80, Flicker free, (flickershouldbe below 5 %), life time (LED, Driver & electrical circuitry), ofminimum 50000BurningHours with70%ofinitial Lumenmaintained tilllife ends, CCT3000°K/ 4000°K / 5700°K/6500°K (AsperANSIBin), SDCM(Standard Deviation 45 DELHI SCHEDULE OF RATES (E&M)-2025 Colour Matching) <3,Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BISstandard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete inallrespecti/c external connectionswith1.5sqmm FRLS/HFFR,PVCinsulatedcopper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty.System lumen efficacy≥105 <120lm/Watt output . LM79 & LM80 Test report andalltestingrequiredforLED fixtures as per BISshall be submitted.Shape size and CCT shall be as approved by Engineer-in Charge as per requirement. (Thermalmanagement:heatsinkofaluminiumhousing such that LED junction temperature shall not rise above 90°C). Powdercoateddiecast/Extruded aluminium Body (Thickness > 1.20 mm) (A)18-22 Watt 17 Providing and fixing of 10 Watt LED Bulk Head light fitting with surface mounted including connection, testing and commissioning including dismantling existing complete etc as reqd. Cat No. TIS-304-10-57-SL-DP-NWH Crompton make or equivalent specification Bajaj/Havells/Philips/CG make 18 Providing and fixing of 10 Watt LED batten (Mirror) lighting fixture with extruded polycarbonate directly on ceiling/ wall, including connections, testing and dismantling the existing complete etc. as required. Cat No. TCS-109-10-65-SL-DP-NWH Crompton make or equivalent model & specification of Philips/Crompton /Bajaj/Havells make 19 LED Down lighter (SMD Type) (System lumen Unit Rate efficacy ≥ 105 < 120 lm/Watt )Supplying, Installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -50C to 400C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K /4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) (A)18 Watt 20 LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥105 85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI EMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM (Standard Deviation Colour Matching) (A) 45 Watt 21 Supplying and fixing of 35 litre Water Storage Geyser on wall including fasteners, connection pipe & testing complete etc. as reqd. Model- Troica/Monza DX (Havells)or equivalent specification Bajaj/Havells/ Racold/CG make 22 SITC of water protected outdoor hut type compartmentalized double door cubical panel of 350mm depth size suitable for 415 Volt, 3 phases, 50 Hz made out of 2 mm thick CRCA sheet with required hardware duly painted with powder coated. The panel having 200/415V 4 strip aluminium bus bar duly PVC sleeved, connection inter–connection with required current carrying capacity bus bars with switchgears, separate detachable gland plate, including angle iron base frame made out of 50mmx50mmx5mm angle iron of suitable size of the panel with legs 600 mm long, hinged door, with locking arrangement for inside/outside separately, earth bar/stud, i/c grouting the legs in 1:3:6 cement concrete foundation complete as required with following instruments mounted on it. (Panel should beas per design &drawing approved by Engg in charge) Instruments(Inside/outside)i) 0-500 Volts, Digital voltmeter of size 96 Sqmm x 96 sqmm flush mounting type with Selector switch-01 Set AE makeii ) 0-200 Amps, Direct Digital Ammeter of size 96Sqmmx96sqmm flush mounting type with CTs coiliii) Selector Switchesiv)LED Pilot light (22.5 MM dia) with03 Nos with 6 amp MCB on door closure 23 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100 A, 16 KA,TPMCCB 24 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal) 25 Supplying and fixing of light class G.I. pipe of 80 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required. 26 Supplying and laying of one number PVC insulated and XLPE power cable of 1.1 KV grade ofAluminium conductor 3.5 x 35Sqmm size in the existing DWC/GI pipe as required. 27 Supplying and laying of one number PVC insulated and XLPE power cable of 1.1 KV grade ofAluminium conductor 3.5 x 35Sqmm sizein the existing masonry open duct as required. 28 Supplying and laying of one number PVC insulated and XLPE power cable of 1.1 KV grade ofAluminium conductor2 x 25Sqmm size in the existing DWC/GI pipe as required. 29 Supplying and laying of one number PVC insulated and XLPE power cable of 1.1 KV grade ofAluminium conductor2 x 25Sqmm sizein the existing masonry open duct as required. 30 Supplying and laying of one number PVC insulated and XLPE power cable of 1.1 KV grade ofAluminium conductor2 x 25Sqmm size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)
