Tender for Balance Civil And Allied Works At Sdh Tangdar- Completion of Balance work in residential quarter in SDH Tangdar Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 2 Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick 3 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer 4 Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levelsRaj Nagar plain white marble/Udaipur green marble/zebra black marble 5 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 500x500 mm 6 Earth work in bulk excavation by manual/mechnicalmeans over areas (Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in All kinds of Soil 7 Providing and laying of soling stone size on level (hand packed) watering ramming complete below Foundation& rooms including carriage with cost and carriage complete. 8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 cement: 4coarse sand: 8 graded stone aggregate 40 mm nominal size), complete job. 9 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand) incl all carraiges upto site of work complet ejob. Incl all carraige upto site of work @6.60 per No 10 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 11 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete upto plinth level Mild steel and medium tensile steel bars 12 Dry random rubble masonry with hard stone in foundation and plinth:7.3.1 With bond stone 13 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand) 14 Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns 15 Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) 16 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. 17 Providing and fixing glass panes with putty and glazing clips in wooden doorswindows, clerestory windows, all complete with : 4.0mm thick glass panes 18 p/f of Wooden almirah 2-0 deep with all fittings and fixtures all complete as per directions of engineer in charge (Budloo wood) 19 p/f of Wooden almirah 1-6 deep with all fittings and fixtures all complete as per directions of engineer in charge 20 P/F of PVC pipe 100mm of approved quality as per the directions of engineer incharge etc complete job 21 P/F of PVC pipe 75mm of approved quality as per the directions of engineer incharge etc complete job 22 P/F of 20mm GI Pipes of approved quality as per the directions of engineer incharge etc complete job 23 P/F of 15mm GI Pipesof approved quality as per the directions of engineer incharge etc complete job 24 P/F of WC English type inc flushing cistern of approved quality as per the directions of engineer incharge etc complete job 25 P/F of washin basinof approved quality as per the directions of engineer incharge etc complete job 26 P/F of basin mixerof approved quality as per the directions of engineer incharge etc complete job 27 P/F of Geyser 50 ltr of approved brand and make and as per the directions of engineer incharge etc complete job 28 P/F of Geyser 25 ltrof approved quality as per the directions of engineer incharge etc complete job 29 P/F of angle valve of approved quality as per the directions of engineer incharge etc complete job 30 P/F of wall mixer of approved quality as per the directions of engineer incharge etc complete job 31 P/F of sinkof approved quality as per the directions of engineer incharge etc complete job 32 P/F of sink mixerof approved quality as per the directions of engineer incharge etc complete job 33 P/F of Bib cock of approved quality as per the directions of engineer incharge etc complete job 34 P/F of Towel rodof approved quality as per the directions of engineer incharge etc complete job 35 P/F of Soap case of approved quality as per the directions of engineer incharge etc complete job 36 P/F of Toughened glass shelf of approved quality as per the directions of engineer incharge etc complete job 37 P/F of Head shower of approved quality as per the directions of engineer incharge etc complete job 38 P/F of Gate valve of approved quality as per the directions of engineer incharge etc complete job 39 P/F of cp connectionof approved quality as per the directions of engineer incharge etc complete job 40 P/F of mirrorof approved quality as per the directions of engineer incharge etc complete job 41 P/F of lighting points inc concealed light of approved quality as per the directions of engineer incharge etc complete jobIncl. one lighting point shall incl. wiring for lighting points in 1.5 sq.mm PVC insulated Copper wire & 2.5 sq.mm PVC insulated multi-strand Copper wire for lighting sub-mains, 6 Amp one way switch, 2 mm thick PVC conduit/ Channel with bends junction boxes etc, 6 Amp S pole MCB, 10 Amp DP MCB, 2 way DB for Housing MCB and Hylem Sheet with wooden box recessed in walls with accessories. 42 P/F of Charging points inc concealed light of approved quality as per the directions of engineer incharge etc complete jobIncl. one lighting point shall incl. wiring for lighting points in 1.5 sq.mm PVC insulated Copper wire & 2.5 sq.mm PVC insulated multi-strand Copper wire for lighting sub-mains, 6 Amp one way switch, 2 mm thick PVC conduit/ Channel with bends junction boxes etc, 6 Amp S pole MCB, 10 Amp DP MCB, 2 way DB for Housing MCB and Hylem Sheet with wooden box recessed in walls with accessories. 43 P/F of Heating points of approved quality as per the directions of engineer incharge etc complete job Incl. one heating point shall incl. wiring for heating points in 2.5 sq.mm PVC insulated Copper wire & 4 sq.mm PVC insulated multistrand Copper wire for lighting sub-mains, 16 Amp switch socket combined, 2 mm thick PVC conduit/ Channel with bends junction boxes etc, 10 Amp S pole MCB, 10 Amp DP MCB,2 way DB for Housing MCB and Hylem Sheet with wooden box recessed in walls with accessories. 44 P/F of 03 No. MCB boards and change over boards with service line as per required size of approved brand wire ofapproved quality as per the directions of engineer incharge with payments to be done on measurement of finished items provided and fixed etc complete job. 45 P/F of Exhaust fanof approved quality as per the directions of engineer incharge etc complete job 46 P/F of fanpoints of approved quality as per the directions of engineer incharge etc complete job 47 P/F of panelling inc 12mm plywoodinc all fittings/ fixtures as per directions of engineer in charge etc i/c all carriages and all fixtures complete job (pine wood) 48 Providing And Placing On Terrace (at All Floor Levels) Polyethylene Water Storage Tank, ( ISI : 12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank) of approved quality as per the directions of engineer incharge etc complete job 49 Completion of under ground Operation theatre in SDH Tangdar annexure IProviding and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 50 Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick 51 Providng and fixing of Waterproof panelling PVC of standared quality including all accessories with wooden foam as per requirement as per the direction of engineer incahrge etc complete jobin charge etc i/c all carriages and all fixtures complete job (pine wood) 52 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete 53 Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levelsGranite of any colour or shade (Area of slab over 0.5 sqm) 54 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 500x500 mm 55 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservoir, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of selfhealing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-incharge. The product performance shall carry guarantee for 10 years against any leakage. 23.19.2For Horizontakl surface one coat @ 1.10 kg per sqm 56 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 57 Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). 35mm Ist class kail Wood 58 Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge incld.glazing of float glass panes 5mm thick for windows,ventilators etc and Aluminium sheets(ACP)as per size required for panelling of doors/partitions and dashfasteners,Powder coated aluminum (minimum thickness of powder coated 50 microns) all complete frame work,shutters ,float glass,ACP etc complete jobincluding all carriages. 59 Dry random rubble masonry with hard stone in foundation and plinth:7.3.1 With bond stone 60 Providing and fixing of lighting points inc light of approved quality as per the directions of engineer incharge etc complete jobIncl. one lighting point shall incl. wiring for lighting points in 1.5 sq.mm PVC insulated Copper wire & 2.5 sq.mm PVC insulated multi-strand Copper wire for lighting sub-mains, 6 Amp one way switch, 2 mm thick PVC conduit/ Channel with bends junction boxes etc, 6 Amp S pole MCB, 10 Amp DP MCB, 2 way DB for Housing MCB and Hylem Sheet with wooden box recessed in walls with accessories. 61 Providing and fixing of Heating points of approved quality as per the directions of engineer incharge etc complete job Incl. one heating point shall incl. wiring for heating points in 2.5 sq.mm PVC insulated Copper wire & 4 sq.mm PVC insulated multistrand Copper wire for lighting sub-mains, 16 Amp switch socket combined, 2 mm thick PVC conduit/ Channel with bends junction boxes etc, 10 Amp S pole MCB, 10 Amp DP MCB,2 way DB for Housing MCB and Hylem Sheet with wooden box recessed in walls with accessories. 62 Sanitary Items Annexure IIEarth work in bulk excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in All kinds of Soil 63 Dry random rubble masonry with hard stone in foundation and plinth:7.3.1 With bond stone 64 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 65 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete upto plinth level Mild steel and medium tensile steel bars 66 Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns 67 Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick 68 P/F of PVC pipe 100mm of approved quality as per the directions of engineer incharge etc complete job 69 P/F of PVC pipe 75mm of approved quality as per the directions of engineer incharge etc complete job 70 P/F of PVC pipe 50mm of approved quality as per the directions of engineer incharge etc complete job 71 P/F of 25mm GI Pipes of approved quality as per the directions of engineer incharge etc complete job 72 P/F of 20mm GI Pipes of approved quality as per the directions of engineer incharge etc complete job 73 Providing And Placing On Terrace (at All Floor Levels) Polyethylene Water Storage Tank, ( ISI : 12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank) of approved quality as per the directions of engineer incharge etc complete job 74 P/F of Gate valve of approved quality as per the directions of engineer incharge etc complete job 75 P/F of wall mixer of approved quality as per the directions of engineer incharge etc complete job 76 P/F of Bib cock of approved quality as per the directions of engineer incharge etc complete job 77 P/F of washin basinof approved quality inc all fittings (630 x 450 mm) as per the directions of engineer incharge etc complete job 78 P/F of basin mixerof approved quality as per the directions of engineer incharge etc complete job 79 P/F of WC English type inc flushing cistern of approved quality as per the directions of engineer incharge etc complete job 80 P/F of Geyser 50 ltr of approved brand and make and as per the directions of engineer incharge etc inc all fixtures and fittings complete job 81 P/F of mirrorof approved quality as per the directions of engineer incharge etc complete job 82 P/F of cp connectionof approved quality as per the directions of engineer incharge etc complete job 83 P/F of Toughened glass shelf of approved quality as per the directions of engineer incharge etc complete job 84 Completion of underground operation theatre in SDH Tangdar Annexure IIIEarth work in bulk excavation by mechnical/manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in All kinds of Soil 85 Providing and laying of soling stone size on level (hand packed) watering ramming complete below Foundation& rooms including carriage with cost and carriage complete. 86 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) 87 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 88 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 89 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more. 90 Centering and shttering including strutting propping and removal of form work for foundation footing base ,columns, beams ,slab etc 91 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) 92 Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) .Dark shade using ordinary cement. 93 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 94 Providing and fixing Green Transparent color coated roofing sheets of approved brand and make including all fixtures as per directiions of EIC complete job 95 Carriage of Sand bajree 16 km 96 carriage of Bricks from budgam 210 km 97 Completion of Pending FencingSDH Tangdar Compound wallingEarth work in bulk excavation bymechncial/manual means over areas (Exceeding 30 cm and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in All kinds of Soil 98 Providing and laying of soling stone size on level (hand packed) watering ramming complete below Foundation& rooms including carriage with cost and carriage complete. 99 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 100 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6(1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 101 Centering and shuttering including strutting, propping and removal of form work for foundation footing base for columns 102 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand) 103 Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete 104 Engagement of L&T for removing of heavy boulders and dumping them near SDH tandar using heavy duty tippers as per directions Engineer-IC and BMO . 105 CARRIAGE OF MATERIALS by MT upto 15 Kms sand /agg 106 CARRIAGE OF Bricks From Budgam (220 Km) 107 GateEarth work in excavation for all kinds of soil, by manual / mechanical means in trenches for foundation, drains, pipes, cables, etc.: not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan, including disposal of excavated earth up to a lead as directed by site engineer in charge, disposed soil to be levelled and neatly dressed including setting out. 108 Providing and laying of soling stone size on level (hand packed) watering ramming complete below Foundation& rooms including carriage with cost and carriage complete. 109 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 cement: 4coarse sand: 8 graded stone aggregate 40 mm nominal size), complete job. 110 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement for foundation in 1:1½:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size), including all carriages complete job. 111 Providing and fixing Reinforcement for RC work incl. straightening cutting binding placing in position and binding all complete hot rolled deformed bars @150KG Per CUM of quantity vide item No. 04. 112 Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns et, complete job. 113 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 114 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade, two or more coats on new work. 115 Carriage of materials from source to site of work by MT Sand/bajri for an average lead of 10Km
