|
| 1 | SITC of PUF Roofing Panel:-The Roof Panels shall be constructed of 60 mm (60+30 mm) thick PUF insulation & density of 40±2 kg/m3 laminated 0.5mm Pre-Painted GI outside and 0.5mm inside of Roof Panels. The top sheet shall be high ribbed in trapezoidal shape and bottom sheet shall be Micro Ribbed Pre- Coated PPGI sheet. The PPGI sheets shall conform to IS: 14246 and PUF insulation shall conform to IS: 12436. The top side of the roof panels shall have 30 mm crest at 200 mm centre to centre pitch. The top edge of the panels shall have overlap joinery systems. The bottom edges of the panels shall have tongue and groove systems for a continuous engagement for the full length of the roof panels. The Pre coated sheet shall be of30 microns RMP coating over 4-7 microns Primer on the top side and 5 microns of backer coat over the primer on the bottom side of the sheet. The effective cover width of the panel shall be of 1010 mm and length of the panels shall be to suit as per site or as per transportable length. including Flashing & Hardware shall be provided with U Channel, Ridge flashing, Internal and external L flashing, Silicon Sealants (for leak proof joint), Rivets, Nuts, Bots, etc. for wall ceiling and roofs.The PPGI sheet shall be of TATA / JSW / AMNS make and PUF Panels shall be GRIHA & IGBC certified |
| 2 | Providing and fixing of MS work steel gate, grating, and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. The rate shall include the cost of primer and enamel paint on all structural steel work. |
| 3 | Providing and fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required. 0.80 mm thick with zinc coating not less than 275 gm/m2 |
| 4 | Providing and fixing High Pressure Laminate (HPL) ceiling made ofstandard G.I. Sections framing and HPL planks of size 150mm wide and 4mm Groove inclusive of all hangers, edge members and other clips complete, with planks fixed with proper screws by power drills and joints duly finished ensuring level in line and plumb to take final finish. All inclusive ofdetailed cut-outs for light fixtures, AC grilles. All Vertical drops will be measured extra as per actuals.The cost to be inclusive of scaffolding, framing, edge profiles and end profiles, colored rivet/screws ( MODE OF MEASUREMENTL x B) . |
| 5 | Providing and laying Brick work with common burnt clay bricks of class designation 7.5 in superstructure above plinth level upto all floorin all shapes and sizes in :Cement mortar 1 : 4 (1 cement : 4 coarse sand) (the rate is inclusive of work upto all floor level including scaffolding & double scafloding ) |
| 6 | Providing and laying Half brick masonry in Superstructure , above plinth level upto alllevelusing bricks of designation 75 Cement mortar 1 : 4 (1 cement : 4 coarse sand) and providingand placing in position 2 Nos. ,6mm Ø M.S. barat every thirdcourse of half brick masonry .(the rate is inclusive of work upto all floor level including scaffolding & double scafloding) |
| 7 | Providing and laying Plaster on new surface on walls in cement sand mortar 1:4 including rackingofjointsetc. complete fine finish : 12 mm thk. (the rate is inclusive of work upto all floor level including scaffolding & double scafloding ) |
| 8 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead : With cement mortar 1 :4 ( 1 cement : 4 coarse sand) |
| 9 | Providing and layiing Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. |
| 10 | Providing and laying external paint on walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). |
| 11 | Providing and laying of Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 75mm thick with 20mm thick nominal size aggregate. |
| 12 | Providing & laying of Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles includingrubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) Medium shade using approximately 50% white cement and 50% ordinary cement. |
| 13 | Demolishing Brick workmanually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 5 km lead as per direction of Engineer-in-charge: In cement mortar. |
| 14 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.1: 3: 6 or richer mix. |
| 15 | Dismantling tile work in floors and wall laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 5 km lead: For thickness of tiles 25mm to 40mm. |
| 16 | Dismantlingroofingincludingridges,hips,valleysandraftersetc.andstackingthewithin 50 meter lead of: G.I. Sheet. |
| 17 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirmingto IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). |
| 18 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). |
| 19 | Plumbing works for toilets/ pantry inlcuding Providing and fixing ofW.C. pan (any type including WC cover,SS jali, health Facuets,cistern 10 liters etc all accessories), Urinals and wash hand basin/ SS sinks for pantry (double bowl with drain board) including pillar cock,angle valve,connection pipe,outlet pipe,ss jali of all sizes with care including all necessary fittings P or S trap. Cost to include if any repair of pipe work or new pipe to be installed in all manners. Toilets to be handed over in working conditions (Each Job as per number of Toilet) |
| 20 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) first layer of slurry of cement @ 0.488 kg/sqm mixed with water proffing cementcompound @0.253 kg//sqm .This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proffing cement compound @ 0.126 kg/sqm This layer will be allowed to air cure for 4 hours followed by water curing for 48 hours. The rates includes preparation of surface treatment & sealing of all joints ,corners, junction with polymer mixed slurry. |
| 21 | Providing & Fixing ofPVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 1000 litres capacity. |
| 22 | P & F 12mm Thick toughned Frosted Glass partition fixed through \"D\" bracket in Gents toilet Urinal Partition. Size 350/450x1050mm including making good the wall. |
| 23 | Providing & Fixing Bevelled edge Mirror of special glass of approved make (Atul, Modi Guard, Saint Gobin or equivalent) complete with 6mm thick asbestos cement sheet ground fixed to wooden screws & washers. |
| 24 | P&F Soap dish or tray of approved quality/ make. : C.P. brass heavy and superior quality. |
| 25 | Providing and fixing ofSoap dispenser (Heavy Traffic) of approved quality/ make. Makes EURONiCS ES09 or equalant |
| 26 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade including the cost of centering and shuttering - All work in M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size) & minimum cement content to be 250 kg per Cu.mt |
| 27 | Providing and laying Random rubble dry stone Kharanja under floor. |
